Analysis of optical purity and impurity of synthetic D-phenylalanine products using sulfated beta-cyclodextrin as chiral selector by reversed-polarity capillary electrophoresis

A new capillary electrophoresis (CE) method has been achieved for simultaneous separation and quantification of phenylalanine, N-acetylphenylalanine enantiomers, and prochiral N-acetylaminocinnamic acid, possibly co-existent in reaction systems or synthesized products of D-phenylalanine. The separation was carried out in an uncoated capillary under reversed-electrophoretic mode. Among the diverse charged cyclodextrins (CDs) examined, highly sulfated (HS)-beta-CD as the chiral selector exhibited the best enantioselectivity. The complete separation of the analytes was obtained under the optimum conditions of pH 2.5, 35 mM Tris buffer containing 4% HS-beta-CD, applied voltage -15 kV, and capillary temperature 25 degrees C. Furthermore, the proposed method was applied to the determination of optical purity and trace impurities in three batches of the asymmetric synthetic samples of D-phenylalanine, and satisfactory results were obtained. The determination recoveries of the samples were in the range of 97.8-103.8%, and precisions fell within 2.3-5.0% (RSD). The results demonstrate that this CE method is a useful, simple technique and is applicable to purity assays of D-phenylalanine.     

NMR studies of chiral discrimination relevant to the enantioseparation of N-acylarylalkylamines by an (R)-phenylglycinol-derived chiral selector

Recently, it was reported that the chiral recognition ability of (R)-N-3,5-dinitrobenzoyl phenylglycinol derivative was examined as a new HPLC chiral stationary phase (CSP 1) for the resolution of racemic N-acylnaphthylalkylamines. However, the mechanism of chiral discrimination on the CSP remained elusive until now. In this study, a spectroscopic investigation of the chiral discrimination mechanism of CSP 1 was undertaken using mixtures of (R)-N-3,5-dinitrobenzoyl phenylglycinol-derived chiral selector (2) and each of the enantiomers of N-acylnaphthylalkylamines (3) by NMR study. First, the differences in free energy changes (DeltaDeltaG) upon diastereomeric complexation in solution between the complex of each isomer with chiral selector 2 by NMR titration were calculated. The values were then compared with those estimated by chiral HPLC. The chemical shift changes of each proton on the chiral selector and analytes were also checked and it was found that the chemical shift changes decreased continuously as the acyl group on analytes increased in length. This observation was consistent with the HPLC data. From these experimental results, the interaction mechanism of chiral discrimination between the chiral selector and the analytes is more precisely explained.     

Self‐assembly and chiral recognition of quartz crystal microbalance chiral sensor

A novel chiral sensor based on the self‐assembled monolayer of (6^A‐ω‐mercaptoethylureado‐6^A‐deoxy)heptakis(2,3‐di‐o‐phenylcarbamoyl)‐6^B, 6^C, 6^D, 6^E, 6^F, 6^G‐ hexa‐o‐phenylcarbamoyl‐β‐cyclodextrin (Ph‐β‐CD‐SH) on a quartz crystal transducer for chiral recognition was set up. (R,S)‐(±)‐(3‐Methoxyphenyl)ethylamine were recognized by this QCM chiral sensor with a QCM chiral discrimination factor of 1.33. Furthermore, UV spectroscopy was used to investigate the mechanism of host‐guest interactions between (6^A‐azido‐6^A‐deoxy)heptakis(2,3‐di‐o‐phenylcarbamoyl)‐6^B, 6^C, 6^D, 6^E, 6^F, 6^G‐hexa‐o‐phenylcarbamoyl‐β‐cyclodextrin (Ph‐β‐CD) and (R,S)‐(±)‐(3‐methoxyphenyl) ethylamine. The UV discrimination factor was determined to be 0.066. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Determination of enantiomeric excess for 2,3-dihydroxy-3-phenylpropionate compounds by capillary electrophoresis using hydroxypropyl-beta-cyclodextrin as chiral selector

A new capillary zone electrophoresis (CZE) method was developed to separate three chiral 2,3-dihydroxy-3-phenylpropionate enantiomers using neutral hydroxypropyl-beta-CD (HP-beta-CD) as chiral selector and borate as background electrolyte. The results showed that HP-beta-CD exhibited good enantioselectivity and high resolution was achieved under the optimum condition of pH 10.3, 200 mM borate buffer containing 6% methanol and 50 mM HP-beta-CD at 15 kV and 20 degrees C within 16 min. The precision of the method was <0.9% for migration time and 4.5% for corrected peak area. In addition, the developed method was successfully applied to the determination of enantiomeric excess (ee) of synthetic 2,3-dihydroxy-3-phenylpropionate samples. With this method, low as 0.2% impurity of the undesirable enantiomer in the presence of high amount of target enantiomer was determined. The results demonstrated that the proposed CZE method is a simple and useful technique and is applicable to ee assay of 2,3-dihydroxy-3-phenylpropionate enantiomers.     

Determination of the enantiomeric composition of chiral delta-2-oxazolines-1,3 by 1H and 19F NMR spectroscopy using chiral solvating agents

Studies of the perturbing effect of chiral solvating agents (CSAs) 5a and mostly of 5c upon the NMR spectra of chiral Delta(2)-oxazoline 1 demonstrated the ability of these fluoroalcohols to afford diastereomeric solvates from these solutes. Thus, for all tested Delta(2)-oxazolines 1Aa-d, 1Ba, and 1e there is at least one possibility to proceed to their enantiomeric discrimination either by (1)H or (19)F NMR using these CSAs (see Fig. 1). NMR results are discussed from substrate and CSA structure standpoints and a solvation model is proposed on the basis of the inequivalence senses generally observed. Then the method was applied to extracts of incubated locust tissues obtained by solid phase extraction (SPE) after a partial unmasking of the substrate 1.     

Chiral separation of 2,3-allenoic acid by capillary zone electrophoresis using cyclodextrin derivatives

In this paper, five of six samples of 2,3-allenoic acid enantiomers were separated by capillary zone electrophoresis (CZE) using hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD) as chiral selectors. Using HP-beta-CD for chiral separation, three of the six enantiomers were separated. Five experimental conditions including HP-beta-CD concentration, pH, buffer concentration, temperature, and running voltage were investigated for their influence on separation and migration using enantiomers of 2-methyl-4-phenyl-2,3-butadienoic acid (A) and 2-(n-propyl)-4-phenyl-2,3-butadienoic acid (B) as samples. Good separation results were observed when [HP-beta-CD] = 3-12 mmol/L and pH = 7-9 for samples A and B. The temperature range of 15-25 degrees C can be selected for convenience. According to the chiral separation results, HP-beta-CD and HP-gamma-CD should be valuable selectors to separate 2,3-allenoic acids and HP-gamma-CD was suggested to separate the 2,3-allenoic acid samples with a group at 4-position bulkier than phenyl.     

HPLC‐method for determination of permethrin enantiomers using chiral β‐cyclodextrin‐based stationary phase

The liquid chromatographic separation of permethrin enantiomers on chiral β‐cyclodextrin‐based stationary phase has been investigated. All four enantiomers are obtained by using simple methanol and water mobile phase, under gradient mode. The method was optimized and validated. The relationship between temperature and chromatographic parameters: k′ (capacity factor), α (separation factor) and Rs (resolution factor) was studied. Van't Hoff's curves for each enantiomer were plotted for temperature range 288–318 K. It was noticed that the response factor ratio of permethrin isomers differ and calculated value is found to be 1.66 (cis/trans, for n = 5). This method has been used for determining permethrin enantiomer ratio for a few samples of working standards and one formulation. Chirality 2010. © 2009 Wiley‐Liss, Inc.     

Biphasic recognition chiral extraction: A novel method for separation of mandelic acid enantiomers

This article reports a new chiral separation method-biphasic recognition chiral extraction for the separation of mandelic acid enantiomers. Distribution behavior of mandelic acid enantiomers was studied in the extraction system with O,O'-di-benzoyl-(2S,3S)-4-toluoyl-tartaric acid (D-(+)-DTTA) in organic phase and beta-CD derivatives in aqueous phase, and the influence of the types and concentrations of extractants and pH on extraction efficiency was investigated. Hydroxypropyl-beta-cyclodextrin (HP-beta-CD), hydroxyethyl-beta-cyclodextrin (HE-beta-CD), and methyl-beta-cyclodextrin (Me-beta-CD) have stronger recognition abilities for S-mandelic acid than those for R-mandelic acid, among which HP-beta-CD has the strongest ability. D-(+)-DTTA preferentially recognizes R-mandelic acid. pH and the concentrations of extractants have great effects on chiral separation ability. A high enantioseparation efficiency with a maximum enantioselectivity of 1.527 is obtained at pH of 2.7 and the ratio of 2:1 of [D-(+)-DTTA] to [HP-beta-CD]. The obtained results indicate that the biphasic recognition chiral extraction is of stronger chiral separation ability than the monophasic recognition chiral extraction. It may be very helpful to optimize the extraction systems and realize the large-scale production of pure enantiomers.     

Synthesis of chiral vicinal diols and analysis of them by capillary zone electrophoresis

This paper describes an improved access to 1,4-bis (9-O-quininyl) phthalazine [(QN)(2)PHAL], a very useful chiral ligand for catalytic asymmetric dihydroxylation (AD), by using CaH(2) as acid-binding reagent in a high yield under mild conditions. The application of (QN)(2)PHAL to the AD reactions of eight olefins exhibited excellent enantioselectivity and activity with corresponding chiral vicinal diols. Furthermore, a capillary zone electrophoresis method was developed to separate the aforementioned chiral vicinal diols by using of neutral beta-cyclodextrin (beta-CD) as chiral selector and borate as running buffer. High resolution was achieved under the optimal conditions of beta-CD 2.2% (w/v), pH 10, 200 mM borate buffer at 15 kV, and 20 degrees C within 15 min. The relative standard deviations of the corrected peak areas and migration time were less than 3.9% and 1.3%, respectively. In addition, the developed method was successfully applied to the determination of the purity and the enantiomeric excesses value (%ee) of the AD reaction products.     

Inclusion complex of fenbufen with beta-cyclodextrin

An inclusion complex of fenbufen with beta-cyclodextrin (beta-CD) in aqueous solution was characterized by (1)H-NMR spectroscopy. The [1:1] stoichiometry was determined and a stability constant of several 1000s (M(-1)) was calculated. The geometry of the inclusion complex was established based on MM(+) molecular mechanics calculations.     

Low molecular weight polyethylenimines linked by beta-cyclodextrin for gene transfer into the nervous system

BACKGROUND: Polyethylenimines (PEIs) with high molecular weights are effective nonviral gene delivery vectors. However, the in vivo use of these PEIs can be hampered by their cellular toxicity. In the present study we developed and tested a new PEI polymer synthesized by linking less toxic, low molecular weight (MW) PEIs with a commonly used, biocompatible drug carrier, beta-cyclodextrin (CyD). METHODS AND RESULTS: The terminal CyD hydroxyl groups were activated by 1,1'-carbonyldiimidazole. Each activated CyD then linked two branched PEI molecules with MW of 600 Da to form a CyD-containing polymer with MW of 61 kDa, in which CyD served as a part of the backbone. The PEI-CyD polymer developed was soluble in water and biodegradable. In cell viability assays with sensitive neurons, the polymer performed similarly to low-MW PEIs and displayed much lower cellular cytotoxicity compared to PEI 25 kDa. The gene delivery efficiency of the polymer was comparable to, and at higher polymer/DNA ratios even higher than, that offered by PEI 25 kDa in neural cells. Attractively, intrathecal injection of plasmid DNA complexed by the polymer into the rat spinal cord provided levels of gene expression close to that offered by PEI 25 kDa. CONCLUSIONS: The polymer reported in the current study displayed improved biocompatibility over non-degradable PEI 25 kDa and mediated gene transfection in cultured neurons and in the central nervous system effectively. The new polymer would be worth exploring further as an in vivo delivery system of therapeutic genetic materials for gene therapy of neurological disorders.     

Enantioresolution and absolute configurations of chiral meta-substituted diphenylmethanols as determined by X-ray crystallographic and 1H NMR anisotropy methods

meta-Substituted diphenylmethanols were enantioresolved by the method of chiral phthalic acid yielding enantiopure alcohols. Their absolute configurations were unambiguously determined by X-ray crystallography of chiral phthalate esters and/or by the (1)H NMR anisotropy method using 2-methoxy-2-(1-naphthyl)propionic acid.     

Application of cross-linked beta-cyclodextrin polymer for adsorption of aromatic amino acids

Beta-cyclodextrin (beta-CyD) was cross-linked by hexamethylene diisocyanate and the polymer was investigated for adsorption of aromatic amino acids (AAA) from phosphate buffer. High adsorption rates were observed at the beginning and the adsorption equilibrium was then gradually achieved in about 45 min. The adsorption of AAA decreased with the increase of initial concentration and also temperature. Under the same conditions, the adsorption efficiencies of AAA were in the order of L-tryptophan (L-Trp) > L-phenylalanine (L-Phe) > L-tyrosine (L-Tyr). Much higher adsorption values, up to 52.4 and 43.0 mg/g for L-Trp and L-Phe, respectively, at 50 mmol/L and 3.2 mg/g for L-Tyr at 2 mmol/L, were obtained with the beta-CyD polymer at 37 degrees C. It was shown that the adsorption of AAA on the beta-CyD polymer was consistent with the Freundlich isotherm equation. The adsorption of mixed aromatic amino acids and branched-chain amino acids (BCAA) showed that AAA were preferentially adsorbed with adsorption efficiencies 10-24%, while those of BCAA were lower than 2%. It seems that the structure and hydrophobicity of amino acid molecules are responsible for the difference in adsorption, by influencing the strength of interactions between amino acid molecule and the polymer.     

Convenient method for determining the absolute configuration of chiral alcohols with racemic 1H NMR anisotropy reagent,M(alpha)NP acid: use of HPLC-CD detector

A convenient method for determining the absolute configuration of chiral secondary alcohols using the racemic NMR anisotropy reagent, (+/-)-2-methoxy-2-(1-naphthyl)propionic acid [(+/-)-M(alpha)NP acid], and an HPLC-CD detector was developed. The method was successfully applied to some chiral alcohols derived from (-)-alpha-santonin.     

Comparison of three S‐β‐CDs with different degrees of substitution for the chiral separation of 12 drugs in capillary electrophoresis

Three kinds of sulfated β‐cyclodextrin (S‐β‐CD), including a single isomer, heptakis‐6‐sulfato‐β‐cyclodextrin (HS‐β‐CD), degree of substitution (DS) of 7, which was synthesized in our laboratory and another two commercialized randomly substituted mixtures, a sulfated β‐cyclodextrin with DS of 7 to 11, as well as a highly sulfated‐β‐cyclodextrin with DS of 12 to 15, were used for the enantioresolution of 12 drugs (the β‐blockers, phenethylamines, and anticholinergic agents) in capillary electrophoresis. The enantioseparation under varying concentrations of S‐β‐CD and background electrolyte pH were systematically investigated and compared. Based on the experimental results, the effect of the nature of S‐β‐CD and analyte structure on the enantioseparation is discussed.     

MalphaNP acid, a powerful chiral molecular tool for preparation of enantiopure alcohols by resolution and determination of their absolute configurations by the (1)H NMR anisotropy method

A novel methodology using a chiral molecular tool of MalphaNP acid (1), 2-methoxy-2-(1-naphthyl)propionic acid, useful for preparation of enantiopure secondary alcohols and determination of their absolute configurations by the (1)H NMR anisotropy method was developed; racemic MalphaNP acid (1) was enantioresolved with (-)-menthol, and the enantiopure MalphaNP acid (S)-(+)-(1) obtained was allowed to react with racemic alcohol, yielding a mixture of diastereomeric esters, which was clearly separated by HPLC on silica gel. By applying the sector rule of (1)H NMR anisotropy effect, the absolute configuration of the first-eluted MalphaNP ester was unambiguously determined. Solvolysis or reduction of the first-eluted MalphaNP esters yielded enantiopure alcohols.     

Resolution of 2-chloromandelic acid with (R)-(+)-N-benzyl-1-phenylethylamine: chiral discrimination mechanism

During the resolution of 2-chloromandelic acid with (R)-(+)-N-benzyl-1-phenylethylamine, the crystals of the less soluble salt were grown, and their structure were determined and presented. The chiral discrimination mechanism was investigated by examining the weak intermolecular interactions (such as hydrogen bond, CH/π, and van der Waals interactions) and molecular packing mode in crystal structure of the less soluble diastereomeric salt. A one-dimensional double-chain hydrogen-bonding network and a "lock-and-key" supramolecular packing mode are disclosed. The investigation demonstrates that hydrophobic layers with corrugated surfaces can fit into the grooves of one another to realize a compact packing, when the molecular structure of resolving agent is much larger than that of the racemate. This "lock-and-key" assembly is recognized to be another characteristic of molecular packing contributing to the chiral discrimination, in addition to the well-known sandwich-like packing by hydrophobic layers with planar boundary surfaces.     

The role of pi-acidic and pi-basic chiral stationary phases in the high-performance liquid chromatographic enantioseparation of unusual beta-amino acids

The application of 3,5-dimethylphenyl-carbamoylated-beta-cyclodextrin (Cyclobond I 2000 DMP) and 2,6-dinitro-4-trifluoromethylphenyl-ether-beta-cyclodextrin-based (Cyclobond DNP) chiral stationary phases for the high-performance liquid chromatographic enantioseparation of unusual beta-amino acids is reported. The investigated amino acids were saturated or unsaturated alicyclic beta-3-homo-amino acids and bicyclic beta-amino acids. Prior to chromatographic analyses, all amino acids were transformed to N-3,5-dinitrobenzoyl- or N-3,5-dimethylbenzoyl form to ensure a pi-acidic or pi-basic function and to enhance the pi-acidic-pi-basic interactions between analytes and chiral selectors. Chromatographic results are given as retention, separation and resolution factors. The chromatographic conditions were varied to achieve optimal separation. The sequence of elution of the enantiomers was determined in some cases.     

Assignment of absolute configuration of 3-hydroxy beta-lactams by the NMR "mix and shake" method

The absolute configurations of several 3-hydroxy beta-lactams were assigned by the NMR "mix and shake" methodology developed by Riguera and co-workers. The results from the NMR study correlated perfectly with the absolute configurations obtained from X-ray crystallographic structure analyses and chiral-phase HPLC data.     

Enantioselective chromatography of alkyl derivatives of 5-ethyl-5-phenyl-2-thiobarbituric acid studied by semiempirical AM1 method

Complexation of alkyl derivatives of 5-ethyl-5-phenyl-2-thiobarbituric acid (2-thiophenobarbital) enantiomers by beta-cyclodextrin was investigated by the AM1 method. The inclusion complexes of beta-cyclodextrin with neutral and anionic forms of these enantiomers have been modeled and energetically optimized. The chiral discrimination of enantiomers was analyzed in terms of differences in the interaction energies. The calculated interaction energies between each enantiomer of the investigated 2-thiobarbiturates and beta-cyclodextrin confirm the ability of beta-cyclodextrin to act as a mobile phase additive in reversed-phase HPLC to separate enantiomers by liquid chromatography and rationalize their order of elution.