Characterization of a Mycobacterium tuberculosis insertion sequence belonging to the IS3 family

A repetitive element (IS986), previously isolated from Mycobacterium tuberculosis and shown to detect multiple restriction fragment-length polymorphisms (RFLPs), has been sequenced. It consists of a potential insertion sequence of 1358bp, with 30-bp inverted repeat ends. IS986 has four potentially significant open reading frames (ORFs): ORFa1, ORFa2 and ORFb on one strand and ORFc on the complementary strand. The sequences of the potential translated products identify IS986 as a member of the IS3 family, with an apparent frameshift between ORFa1 and ORFa2. IS986 has potential as a highly specific probe for detection and typing of M. tuberculosis, as well as for transposon mutagenesis of mycobacteria. The sequence of IS986 is virtually identical to that of another recently described element, IS6110 (Thierry et al., 1990).     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis

Abstract: An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis . IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus . IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

Identification of an insertion sequence, IS1081, in Mycobacterium bovis.

An insertion sequence, IS1081, in the genome of Mycobacterium bovis has been identified and sequenced. It is 1324 bp long with 15 bp inverted repeat ends and contains a large ORF. There are six copies of IS1081 in the genome of M. bovis and the element is also present in Mycobacterium tuberculosis. IS1081 is not closely related to other DNA elements described in actinomycetes but its putative transposase bears some resemblance to that of IS256 from Staphylococcus aureus. IS1081 may be useful for genetic manipulations and for developing a diagnostic test for bovine tuberculosis based on the polymerase chain reaction.     

Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

Immunity to repeated transposition of the insertion sequence IS21

The ability of pBR325 derivatives carrying a copy of IS21-element to accept the second copy of this element from plasmid pRP19.6, a temperature-sensitive for replication mutant of RPI containing the duplicated IS21 was studied. It was shown that the frequency of IS21 transposition into plasmids pBR32S::IS21 differing by localization IS21 was lower by two orders of magnitude as compared to that of pBR325. The restriction endonuclease analysis revealed that the insertion of the second copy of IS21 resulted in the formation of pBR325 derivatives carrying the tandem repeated copies of IS21. It was also shown that the plasmids pBR325::IS21 were capable of increasing the frequency of pRP19.6 insertion into the bacterial chromosome from 3-9 to 200-300 times depending on IS21 localization. On the basis of the results obtained and literature data the possible mechanism of the transposition immunity is discussed.     

Complete nucleotide sequence of immunogenic protein MPB70 from Mycobacterium bovis BCG

The extracellular protein MPB70 is a heat-stable immunogenic protein which was found in the culture filtrate of Mycobacterium bovis BCG Japanese. We determined the complete nt and aa sequences of MPB70 and correlated with the previously reported data. The N-terminal sequence revealed that the signal peptide (SP) consisted of 30 aa and that the mature protein had 163 aa with a molecular weight of 16,305. The SP displayed a characteristic feature of an Ala-rich property which would be efficient in a SP function.     

IS861, a group B streptococcal insertion sequence related to IS150 and IS3 of Escherichia coli.

A 1,442-base-pair (bp) insertion sequence (IS861) was identified in the type III group B streptococcal (GBS) strain COH-1. It is flanked by 26-bp imperfect inverted repeats and contains two open reading frames, 1 and 2, encoding 141- and 277-amino-acid proteins, respectively. A 3-bp target sequence, ACA, is duplicated and flanks each inverted repeat. IS861 shares greater than 30% homology with IS3 and IS150 of Escherichia coli, primarily in the region of their putative transposases. Northern (RNA) analysis revealed that RNA is actively transcribed in vivo by IS861 and 17- and 36-kilodalton proteins were synthesized in E. coli maxicell assays. Multiple copies of IS861 were observed throughout the chromosome of COH-1, and one of the copies is located near genes involved in GBS capsule synthesis. IS861 is the first insertion sequence identified in GBS. Its role in GBS and the significance of its relationship to the phylogenetically similar insertion sequences typified by IS150 and IS3 of E. coli are unknown.     

Stimulation of transposition of the Mycobacterium tuberculosis insertion sequence IS6110 by exposure to a microaerobic environment

The Mycobacterium tuberculosis-specific insertion sequence IS6110/986 has been widely used as a probe because of the multiple polymorphism observed among different strains. To investigate transposition of IS6110, a series of artificially constructed composite transposons containing IS6110 and a kanamycin resistance marker were constructed. The composite transposons were inserted into a conditionally replicating, thermosensitive, Escherichia coli-mycobacterial shuttle vector and introduced into M. smegmatis mc2155. Lawns of transformants were grown at the permissive temperature on kanamycin-supplemented agar and subsequently prevented from further growth by shifting to the non-permissive temperature. Under normal atmospheric conditions, kanamycin-resistant papillae appeared after only about 5-6 weeks of incubation. However, these events were not associated with transposon mobilization. In contrast, lawns that were exposed to a 48 h microaerobic shock generated kanamycin-resistant papillae after only 6-14 days. These events were generated by conservative transposition of the IS6110 composite transposon into the M. smegmatis chromosome, with loss of the shuttle vector. In common with other IS3 family elements, transposition of IS6110 is thought to be controlled by translational frameshifting. However, we were unable to detect any significant frameshifting within the putative frameshifting site of IS6110, and the level of frameshifting was not affected by microaerobic incubation. The finding that transposition of IS6110 is stimulated by incubation at reduced oxygen tensions may be relevant to transposition of IS6110 in M. tuberculosis harboured within TB lesions.     

Complete nucleotide sequence of the 16S rRNA gene of Mycobacterium bovis BCG.

The complete nucleotide sequence of the 16S rRNA gene of Mycobacterium bovis BCG was determined. Its coding region was estimated to be 1,536 base pairs long. The nucleotide sequence of the gene in M. bovis BCG has homologies of 75 and 89% with those of Escherichia coli and Streptomyces lividans, respectively.     

Genome sequence of Mycobacterium bovis BCG Moreau, the Brazilian vaccine strain against tuberculosis

Mycobacterium bovis bacillus Calmette-Guérin (BCG) is the only vaccine available against tuberculosis, and the strains used worldwide represent a family of daughter strains with distinct genotypic characteristics. Here we report the complete genome sequence of M. bovis BCG Moreau, the strain in continuous use in Brazil for vaccine production since the 1920s.     

Characterization of IS666, a newly described insertion element of Mycobacterium avium

The insertion sequence IS666 was isolated from Mycobacterium avium strain 101. IS666 is a 1474 bp insertion sequence belonging to the IS256 family, that includes IS6120 from Mycobacterium smegmatis, IS1166 and IS1295 from Rhodococcus sp. IGTS8, IST2 from Thiobacillus ferrooxidans, IS256 from Staphylococcus aureus, and ISRm3 from Rhizobium meliloti. IS666 has 24 bp imperfect inverted repeats that fit the consensus described for the family, and generates 9 bp duplications upon insertion into the host DNA with no apparent specificity in the target sequence. In contrast with its two closest homologues, IS1166 and IS6120, IS666 contains a single ORF that would codify a transposase of 434 aa. IS666 is restricted to M. avium, where it is present in 21% of the isolates in a number ranging between 1 to 7 copies.     

Use of gene probes based on the insertion sequence IS986 to differentiate between BCG vaccine strains

N.G. FOMUKONG, J.W. DALE, T.W. OSBORN AND J.M. GRANGE. 1992. Gene probes derived from the insertion sequence IS986, which have previously been shown to differentiate isolates of Mycobacterium tuberculosis for epidemiological analysis, are also capable of distinguishing two groups of BCG vaccine strains. Most BCG strains have a single copy of IS986, at the same chromosomal site, while the Brazilian, Japanese and USSR strains have an additional copy at a different, common location. These results correlate with the results of previous antigenic analysis and may reflect a different clonal origin of the two groups of BCG strains.     

Isolation and analysis of IS6120, a new insertion sequence from Mycobacterium smegmatis

Insertion sequence IS6120 from Mycobacterium smegmatis was identified by its ability to transpose into different sites in the lambda repressor gene, cl857, carried on an Escherichia coli/mycobacteria shuttle plasmid. IS6120 is a novel 1.5 kb insertion sequence, which has 24-bp imperfect terminal inverted repeats and generates 9-bp duplications of the target DNA following insertion. IS6120 is present in at least three copies in M. smegmatis but was not found in other species, including Mycobacterium tuberculosis. Nucleotide sequence analysis revealed that IS6120 contains two open reading frames, one of which encodes a putative transposase with similarities to those found in IS256 from Staphylococcus aureus, IST2 from Thiobacillus ferrooxidans, and ISRm3 from Rhizobium meliloti. The fact that IS6120 does not recognize a consensus target sequence for insertion and has no homologous sequences in the other strains studied makes IS6120 useful for transposon mutagenesis in mycobacteria.     

Cultivation of Mycobacterium bovis BCG in bioreactors

The Mycobacterium bovis BCG vaccine for commercial use is classically produced as surface pellicles by culture on synthetic medium. Under these conditions, reproducibility of the cultures and quality assessment are hampered by slow growth of the bacilli, the formation of bacterial aggregates and a high proportion of dead bacilli after processing and final formulation of the vaccine. Here, we established dispersed cultures of M. bovis BCG in synthetic media in small-scale bioreactors. These cultures allow recording and adjusting of culture parameters and give rise to single bacilli with a high degree of live bacteria. In the murine model, bioreactor-grown M. bovis BCG exhibited slightly stronger replication and persistence than the vaccine produced under the classical conditions. The protective efficacy against challenge with M. tuberculosis was identical for both vaccine preparations.     

Characterization of PPD protein antigens in whole cell lysates of Mycobacterium bovis BCG

The low molecular mass protein antigens in PPD from M. bovis BCG were chemically oligomerized using sulfosuccinimidyl-4-(p-maleimidophenyl)-butyrate (S-SMPB) as a crosslinking agent. Protein oligomers with molecular mass over 90 kDa were obtained and used for the preparation of hyperimmune polyclonal rabbit antiserum. Using this antiserum four protein bands with molecular mass 120, 90, 75 and 65 kDA were detected in immunoblotting analysis of sonic extract from M. bovis BCG separated in SDS-polyacrylamide gel. We suggest that these immunoreactive proteins in the sonic extract represent the native forms of the heat stable low molecular mass protein antigens in PPD.     

Catalase-peroxidase of Mycobacterium bovis BCG converts isoniazid to isonicotinamide, but not to isonicotinic acid: differentiation parameter between enzymes of Mycobacterium bovis BCG and Mycobacterium tuberculosis

Isonicotinic acid hydrazide (Isoniazid, INH) is one of the major drugs worldwide used in the chemotherapy of tuberculosis. Many investigators have emphasized that INH activation is associated with mycobacterial catalase-peroxidase (katG). However, INH activation mechanism is not completely understood. In this study, katG of M. bovis BCG was separated and purified into two katGs, katG I (named as relatively higher molecular weight than katG II) and katG II, indicating that there is some difference in protein structure between two katGs. The molecular weight of the enzymes of katG I and katG II was estimated to be approximately 150,000 Da by gel filtration, and its subunit was 75,000 Da as determined by SDS-PAGE, indicating that purified enzyme was composed of two identical subunits. The specific activity of the purified enzyme katG I was 991.1 (units/mg). The enzymes were then investigated in INH activation by using gas chromatography mass spectrometry (GC-MS). The analysis of GC-MS showed that the katG I from M. bovis BCG directly converted INH (Mr, 137) to isonicotinamide (Mr, 122), not to isonicotinic acid (Mr, 123), in the presence or absence of H2O2. Therefore, this is the first report that katG I, one of two katGs with almost same molecular weight existed in M. bovis BCG, converts INH to isonicotinamide and this study may give us important new light on the activation mechanism of INH by KatG between M. bovis BCG and M. tuberculosis.