Substrate specificity of a recombinant ribose-5-phosphate isomerase from <Emphasis Type="Italic">Streptococcus pneumoniae</Emphasis> and its application in the production of <Emphasis Type="SmallCaps">l</Emphasis>-lyxose and <Emphasis Type="SmallCaps">l</Emphasis>-tagatose

A putative ribose-5-phosphate isomerase (RpiB) from Streptococcus pneumoniae was purified with a specific activity of 26.7 U mg⁻¹ by Hi-Trap Q HP anion exchange and Sephacryl S-300 HR 16/60 gel filtration chromatographies. The native enzyme existed as a 96-kDa tetramer with activity maxima at pH 7.5 and 35°C. The RpiB exhibited isomerization activity with l-lyxose, l-talose, d-gulose, d-ribose, l-mannose, d-allose, l-xylulose, l-tagatose, d-sorbose, d-ribulose, l-fructose, and d-psicose and exhibited particularly high activity with l-form monosaccharides such as l-lyxose, l-xylulose, l-talose, and l-tagatose. With l-xylulose (500 g l⁻¹) and l-talose (500 g l⁻¹) substrates, the optimum concentrations of RpiB were 300 and 600 U ml⁻¹, respectively. The enzyme converted 500 g l⁻¹ l-xylulose to 350 g l⁻¹ l-lyxose after 3 h, and yielded 450 g l⁻¹ l-tagatose from 500 g l⁻¹ l-talose after 5 h. These results suggest that RpiB from S. pneumoniae can be employed as a potential producer of l-form monosaccharides.     

<Emphasis Type="SmallCaps">l</Emphasis>-Arabinose pathway engineering for arabitol-free xylitol production in <Emphasis Type="Italic">Candida tropicalis</Emphasis>

Xylose reductase (XR) is a key enzyme in biological xylitol production, and most XRs have broad substrate specificities. During xylitol production from biomass hydrolysate, non-specific XRs can reduce l-arabinose, which is the second-most abundant hemicellulosic sugar, to the undesirable byproduct arabitol, which interferes with xylitol crystallization in downstream processing. To minimize the flux from l-arabinose to arabitol, the l-arabinose-preferring, endogenous XR was replaced by a d-xylose-preferring heterologous XR in Candida tropicalis. Then, Bacillus licheniformis araA and Escherichia coli araB and araD were codon-optimized and expressed functionally in C. tropicalis for the efficient assimilation of l-arabinose. During xylitol fermentation, the control strains BSXDH-3 and KNV converted 9.9 g l-arabinose l⁻¹ into 9.5 and 8.3 g arabitol l⁻¹, respectively, whereas the recombinant strain JY consumed 10.5 g l-arabinose l⁻¹ for cell growth without forming arabitol. Moreover, JY produced xylitol with 42 and 16% higher productivity than BSXDH-3 and KNV, respectively.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

Heterologous expression and characterization of <Emphasis Type="Italic">Bacillus coagulans</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase

Bacillus coagulans has been of great commercial interest over the past decade owing to its strong ability of producing optical pure l-lactic acid from both hexose and pentose sugars including l-arabinose with high yield, titer and productivity under thermophilic conditions. The l-arabinose isomerase (L-AI) from Bacillus coagulans was heterologously over-expressed in Escherichia coli. The open reading frame of the L-AI has 1,422 nucleotides encoding a protein with 474 amino acid residues. The recombinant L-AI was purified to homogeneity by one-step His-tag affinity chromatography. The molecular mass of the enzyme was estimated to be 56 kDa by SDS-PAGE. The enzyme was most active at 70°C and pH 7.0. The metal ion Mn²⁺ was shown to be the best activator for enzymatic activity and thermostability. The enzyme showed higher activity at acidic pH than at alkaline pH. The kinetic studies showed that the K _m, V _max and k _cat/K _m for the conversion of l-arabinose were 106 mM, 84 U/mg and 34.5 mM⁻¹min⁻¹, respectively. The equilibrium ratio of l-arabinose to l-ribulose was 78:22 under optimal conditions. l-ribulose (97 g/L) was obtained from 500 g/l of l-arabinose catalyzed by the enzyme (8.3 U/mL) under the optimal conditions within 1.5 h, giving at a substrate conversion of 19.4% and a production rate of 65 g L⁻¹ h⁻¹.     

Covalent immobilization of recombinant <Emphasis Type="Italic">Rhizobium etli</Emphasis> CFN42 xylitol dehydrogenase onto modified silica nanoparticles

Rare sugars have many applications in food industry, as well as pharmaceutical and nutrition industries. Xylitol dehydrogenase (XDH) can be used to synthesize various rare sugars enzymatically. However, the immobilization of XDH has not been performed to improve the industrial production of rare sugars. In this study, silica nanoparticles which have high immobilization efficiency were selected from among several carriers for immobilization of recombinant Rhizobium etli CFN42 xylitol dehydrogenase (ReXDH) and subjected to characterization. Among four different chemical modification methods to give different functional groups, the silica nanoparticle derivatized with epoxy groups showed the highest immobilization efficiency (92%). The thermostability of ReXDH was improved more than tenfold by immobilization on epoxy-silica nanoparticles; the t _1/2 of the ReXDH was enhanced from 120 min to 1,410 min at 40 °C and from 30 min to 450 min at 50 °C. The K _m of ReXDH was slightly altered from 17.9 to only 19.2 mM by immobilization. The immobilized ReXDH had significant reusability, as it retained 81% activity after eight cycles of batch conversion of xylitol into l-xylulose. A ∼ 71% conversion and a productivity of 10.7 g h^-1 l^-1 were achieved when the immobilized ReXDH was employed to catalyze the biotransformation of xylitol to l-xylulose, a sugar that has been used in medicine and in the diagnosis of hepatitis. These results suggest that immobilization of ReXDH onto epoxy-silica nanoparticles has potential industrial application in rare sugar production.     

Enhanced <Emphasis Type="SmallCaps">d</Emphasis>-ribose biosynthesis in batch culture of a transketolase-deficient <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strain by citrate

In this study, the effects of citrate addition on d-ribose production were investigated in batch culture of a transketolase-deficient strain, Bacillus subtilis EC2, in shake flasks and bioreactors. Batch cultures in shake flasks and a 5-l reactor indicated that supplementation with 0.2–0.5 g l⁻¹ of citrate enhanced d-ribose production. When B. subtilis EC2 was cultivated in a 15-l reactor in a complex medium, the d-ribose concentration was 70.9 g l⁻¹ with a ribose yield of 0.497 mol mol⁻¹. When this strain was grown in the same medium supplemented with 0.3 g l⁻¹ of citrate, 83.4 g l⁻¹ of d-ribose were obtained, and the ribose yield was increased to 0.587 mol mol⁻¹. Addition of citrate reduced the activities of pyruvate kinase and phosphofructokinase, while it increased those of glucose-6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase. Metabolic flux distribution in the stationary phase indicated that citrate addition resulted in increased fluxes in the pentose phosphate pathway and TCA cycle, and decreased fluxes in the glycolysis and acetate pathways.     

Production of nisin Z using <Emphasis Type="Italic">Lactococcus lactis</Emphasis> IO-1 from hydrolyzed sago starch

A membrane bioreactor for production of nisin Z was constructed using Lactococcus lactis IO-1 in continuous culture using hydrolyzed sago starch as carbon source. A strategy used to enhance the productivity of nisin Z was to maintain the cells in a continuous growth at high cell concentration. This resulted in a volumetric productivity of nisin Z, as 50,000 IU l⁻¹ h⁻¹ using a cell concentration of 15 g l⁻¹, 30^°C, pH 5.5 and a dilution rate of 1.24 h⁻¹. Adding 10 g l⁻¹ YE and 2 g l⁻¹ polypeptone, other inducers were unnecessary to maintain production of nisin. The operating conditions of the reactor removed nisin and lactate, thus minimizing their effects which allowed the maintenance of cells in continuous exponential growth phase mode with high metabolic activity.     

Increase of lycopene production by supplementing auxiliary carbon sources in metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

In the fed-batch culture of glycerol using a metabolically engineered strain of Escherichia coli, supplementation with glucose as an auxiliary carbon source increased lycopene production due to a significant increase in cell mass, despite a reduction in specific lycopene content. l-Arabinose supplementation increased lycopene production due to increases in cell mass and specific lycopene content. Supplementation with both glucose and l-arabinose increased lycopene production significantly due to the synergistic effect of the two sugars. Cell growth by the consumption of carbon sources was related to endogenous metabolism in the host E. coli. Supplementation with l-arabinose stimulated only the mevalonate pathway for lycopene biosynthesis and supplementation with both glucose and l-arabinose stimulated synergistically only the mevalonate pathway. In the fed-batch culture of glycerol with 10 g l⁻¹ glucose and 7.5 g l⁻¹ l-arabinose, the cell mass, lycopene concentration, specific lycopene content, and lycopene productivity after 34 h were 42 g l⁻¹, 1,350 mg l⁻¹, 32 mg g cells⁻¹, and 40 mg l⁻¹ h⁻¹, respectively. These values were 3.9-, 7.1-, 1.9-, and 11.7-fold higher than those without the auxiliary carbon sources, respectively. This is the highest reported concentration and productivity of lycopene.     

Ethanol and xylitol production from glucose and xylose at high temperature by <Emphasis Type="Italic">Kluyveromyces</Emphasis> sp. IIPE453

A yeast strain Kluyveromyces sp. IIPE453 (MTCC 5314), isolated from soil samples collected from dumping sites of crushed sugarcane bagasse in Sugar Mill, showed growth and fermentation efficiency at high temperatures ranging from 45°C to 50°C. The yeast strain was able to use a wide range of substrates, such as glucose, xylose, mannose, galactose, arabinose, sucrose, and cellobiose, either for growth or fermentation to ethanol. The strain also showed xylitol production from xylose. In batch fermentation, the strain showed maximum ethanol concentration of 82 ± 0.5 g l⁻¹ (10.4% v/v) on initial glucose concentration of 200 g l⁻¹, and ethanol concentration of 1.75 ± 0.05 g l⁻¹ as well as xylitol concentration of 11.5 ± 0.4 g l⁻¹ on initial xylose concentration of 20 g l⁻¹ at 50°C. The strain was capable of simultaneously using glucose and xylose in a mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹, achieving maximum ethanol concentration of 38 ± 0.5 g l⁻¹ and xylitol concentration of 14.5 ± 0.2 g l⁻¹ in batch fermentation. High stability of the strain was observed in a continuous fermentation by feeding the mixture of glucose concentration of 75 g l⁻¹ and xylose concentration of 25 g l⁻¹ by recycling the cells, achieving maximum ethanol concentration of 30.8 ± 6.2 g l⁻¹ and xylitol concentration of 7.35 ± 3.3 g l⁻¹ with ethanol productivity of 3.1 ± 0.6 g l⁻¹ h⁻¹ and xylitol productivity of 0.75 ± 0.35 g l⁻¹ h⁻¹, respectively.     

Characterization of <Emphasis Type="SmallCaps">d</Emphasis>-tagatose-3-epimerase from <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis> that converts <Emphasis Type="SmallCaps">d</Emphasis>-fructose into <Emphasis Type="SmallCaps">d-</Emphasis>psicose

A non-characterized gene, previously proposed as the d-tagatose-3-epimerase gene from Rhodobacter sphaeroides, was cloned and expressed in Escherichia coli. Its molecular mass was estimated to be 64 kDa with two identical subunits. The enzyme specificity was highest with d-fructose and decreased for other substrates in the order: d-tagatose, d-psicose, d-ribulose, d-xylulose and d-sorbose. Its activity was maximal at pH 9 and 40°C while being enhanced by Mn²⁺. At pH 9 and 40°C, 118 g d-psicose l⁻¹ was produced from 700 g d-fructose l⁻¹ after 3 h. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Lipid production by <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> Y4 using different substrate feeding strategies

Microbial lipid is a potential alternative feedstock for the biodiesel industry. New culture strategies remain to be developed to improve the economics of microbial lipid technology. This work describes lipid production by the oleaginous yeast Rhodosporidium toruloides Y4 using a 15-l bioreactor with different substrate feeding strategies. Among these strategies, the intermittent feeding mode gave a lipid productivity of 0.36 g l⁻¹ h⁻¹, whereas the constant glucose concentration II (CC-II) mode gave the highest lipid productivity of 0.57 g l⁻¹ h⁻¹. The repeated fed-batch mode according to the CC-II mode was performed with a duration time of 358 h, and the overall lipid productivity was 0.55 g l⁻¹ h⁻¹. Our results suggested that substrate feeding modes had a great impact on lipid productivity and that the repeated fed-batch process was the most appealing method by which to enhance microbial lipid production.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Optimization and mechanism of diacetyl accumulation by <Emphasis Type="Italic">Enterobacter</Emphasis><Emphasis Type="Italic">aerogenes</Emphasis> mutant UV-3

A mutant designated as UV-3 was obtained from wild-type Enterobacter aerogenes 10293 through u.v. radiation. The activities of α-acetolactate decarboxylase (Ald), lactate dehydrogenase (Ldh) and diacetyl reductase (Dr) in UV-3 were strongly attenuated, with the lowest activities at pH 7.0–7.5, and temperature between 36 and 39°C. Compared to the wild-type, the yield of diacetyl by UV-3 was increased 18.7-fold, up to 1.05 ± 0.01 g l⁻¹. Acetoin and ethanol productions were decreased by 48.4 and 71.4%, respectively, but acetate yield was increased by 34.6%. Optimum medium for diacetyl production by UV-3 contained 10% glucose, 0.5% peptone, 0.5% yeast extract powder, 0.01% (NH₄)₂SO₄, 0.1% citric acid, 0.2% MnSO₄ and 0.2% MgSO_4, and this was determined by one-factor-at-a-time approach. Data from the five level central composite designs demonstrated that initial pH of 7.0, temperature of 37°C and rotational speed of 180 rev/min were optimum processing parameters for diacetyl production. The maximum yield of diacetyl could reach 1.35 g l⁻¹ in a 5-l bioreactor. These results showed an enhancement of the non-enzymatic oxidative decarboxylation of α-acetolactate and a decrease in the activities of Ald, Ldh and Dr as a consequence of diacetyl accumulation in UV-3.     

Fermentation of <Emphasis Type="SmallCaps">d</Emphasis>-glucose and <Emphasis Type="SmallCaps">d</Emphasis>-xylose mixtures by <Emphasis Type="Italic">Candida tropicalis</Emphasis> NBRC 0618 for xylitol production

The fermentation of d-glucose and d-xylose mixtures by the yeast Candida tropicalis NBRC 0618 has been studied under the most favourable operation conditions for the culture, determining the most adequate initial proportion in these sugars for xylitol production. In all the experiments a synthetic culture medium was used, with an initial total substrate concentration of 25 g L⁻¹, a constant pH of 5.0 and a temperature of 30 °C. From the experimental results, it was deduced that the highest values of specific rates of production and of overall yield in xylitol were achieved for the mixtures with the highest percentage of d-xylose, specifically in the culture with the initial d-glucose and d-xylose concentrations of 1 and 24 g L⁻¹, respectively, with an overall xylitol yield of 0.28 g g⁻¹. In addition, the specific rates of xylitol production declined over the time course of the culture and the formation of this bioproduct was favoured by the presence of small quantities of d-glucose. The sum of the overall yield values in xylitol and ethanol for all the experiments ranged from 0.26 to 0.56 g bioproduct/g total substrate.     

Production of ectoine through a combined process that uses both growing and resting cells of <Emphasis Type="Italic">Halomonas salina</Emphasis> DSM 5928<Superscript>T</Superscript>

Using ectoine-excreting strain Halomonas salina DSM 5928^T, we developed a new process for high-efficiency production of ectoine, which involved a combined process of batch fermentation by growing cells and production by resting cells. In the first stage, batch fermentation was carried out using growing cells under optimal fermentation conditions. The second stage was the production phase, in which ectoine was synthesized and excreted by phosphate-limited resting cells. Optimal conditions for synthesis and excretion of ectoine during batch fermentation in a 10 l fermentor were 0.5 mol l⁻¹ NaCl and an initial monosodium glutamate concentration of 80 g l⁻¹ respectively. The pH was adjusted to 7.0 and the temperature was maintained at 33°C. In phosphate-limited resting cells medium, monosodium glutamate and NaCl concentration was 200 g l⁻¹ and 0.5 mol l⁻¹, respectively, as well as pH was 7.0. The total concentration of ectoine produced was 14.86 g l⁻¹, the productivity and yield of ectoine was 7.75 g l⁻¹ day⁻¹ and 0.14 g g⁻¹, respectively, and the percentage of ectoine excreted was 79%. These levels of ectoine production and excretion are the highest reported to date.     

Metabolic engineering of <Emphasis Type="Italic">Escherichia coli</Emphasis> for improving <Emphasis Type="SmallCaps">l</Emphasis>-3,4-dihydroxyphenylalanine (<Emphasis Type="SmallCaps">l</Emphasis>-DOPA) synthesis from glucose

l-3,4-dihydroxyphenylalanine (l-DOPA) is an aromatic compound employed for the treatment of Parkinson's disease. Metabolic engineering was applied to generate Escherichia coli strains for the production of l-DOPA from glucose by modifying the phosphoenolpyruvate:sugar phosphotransferase system (PTS) and aromatic biosynthetic pathways. Carbon flow was directed to the biosynthesis of l-tyrosine (l-Tyr), an l-DOPA precursor, by transforming strains with compatible plasmids carrying genes encoding a feedback-inhibition resistant version of 3-deoxy-d-arabino-heptulosonate-7-phosphate synthase, transketolase, the chorismate mutase domain from chorismate mutase-prephenate dehydratase from E. coli and cyclohexadienyl dehydrogenase from Zymomonas mobilis. The effects on l-Tyr production of PTS inactivation (PTS⁻ gluc⁺ phenotype), as well as inactivation of the regulatory protein TyrR, were evaluated. PTS inactivation caused a threefold increase in the specific rate of l-Tyr production (q _l-Tyr), whereas inactivation of TyrR caused 1.7- and 1.9-fold increases in q _l-Tyr in the PTS⁺ and the PTS⁻ gluc⁺ strains, respectively. An 8.6-fold increase in l-Tyr yield from glucose was observed in the PTS⁻ gluc⁺ tyrR ⁻ strain. Expression of hpaBC genes encoding the enzyme 4-hydroxyphenylacetate 3-hydroxylase from E. coli W in the strains modified for l-Tyr production caused the synthesis of l-DOPA. One of such strains, having the PTS⁻ gluc⁺ tyrR ⁻ phenotype, displayed the best production parameters in minimal medium, with a specific rate of l-DOPA production of 13.6 mg/g/h, l-DOPA yield from glucose of 51.7 mg/g and a final l-DOPA titer of 320 mg/l. In a batch fermentor culture in rich medium this strain produced 1.51 g/l of l-DOPA in 50 h.     

<Emphasis Type="SmallCaps">l</Emphasis>-Proline nutrition and catabolism in <Emphasis Type="Italic">Staphylococcus saprophyticus</Emphasis>

Staphylococcus saprophyticus strains ATCC 15305, ATCC 35552, and ATCC 49907 were found to require l-proline but not l-arginine for growth in a defined culture medium. All three strains could utilize l-ornithine as a proline source and contained l-ornithine aminotransferase and Δ¹-pyrroline-5-carboxylate reductase activities; strains ATCC 35552 and ATCC 49907 could use l-arginine as a proline source and had l-arginase activity. The proline requirement also could be met by l-prolinamide, l-proline methyl ester, and the dipeptides l-alanyl-l-proline and l-leucyl-l-proline. The bacteria exhibited l-proline degradative activity as measured by the formation of Δ¹-pyrroline-5-carboxylate. The specific activity of proline degradation was not affected by addition of l-proline or NaCl but was highest in strain ATCC 49907 after growth in Mueller–Hinton broth. A membrane fraction from this strain had l-proline dehydrogenase activity as detected both by reaction of Δ¹-pyrroline-5-carboxylate with 2-aminobenzaldehyde (0.79 nmol min⁻¹ mg⁻¹) and by the proline-dependent reduction of p-iodonitrotetrazolium (20.1 nmol min⁻¹ mg⁻¹). A soluble fraction from this strain had Δ¹-pyrroline-5-carboxylate dehydrogenase activity (88.8 nmol min⁻¹ mg⁻¹) as determined by the NAD⁺-dependent oxidation of dl-Δ¹-pyrroline-5-carboxylate. Addition of l-proline to several culture media did not increase the growth rate or final yield of bacteria but did stimulate growth during osmotic stress. When grown with l-ornithine as the proline source, S. saprophyticus was most susceptible to the proline analogues L-azetidine-2-carboylate, 3,4-dehydro-dl-proline, dl-thiazolidine-2-carboxylate, and l-thiazolidine-4-carboxylate. These results indicate that proline uptake and metabolism may be a potential target of antimicrobial therapy for this organism.     

Succinic acid production from sugarcane bagasse hemicellulose hydrolysate by <Emphasis Type="Italic">Actinobacillus succinogenes</Emphasis>

Succinic acid, a four-carbon diacid, has been the focus of many research projects aimed at developing more economically viable methods of fermenting sugar-containing natural materials. Succinic acid fermentation processes also consume CO₂, thereby potentially contributing to reductions in CO₂ emissions. Succinic acid could also become a commodity used as an intermediate in the chemical synthesis and manufacture of synthetic resins and biodegradable polymers. Much attention has been given recently to the use of microorganisms to produce succinic acid as an alternative to chemical synthesis. We have attempted to maximize succinic acid production by Actinobacillus succinogenes using an experimental design methodology for optimizing the concentrations of the medium components. The first experiment consisted of a 2⁴⁻¹ fractional factorial design, and the second entailed a Central Composite Rotational Design so as to achieve optimal conditions. The optimal concentrations of nutrients predicted by the model were: NaHCO₃, 10.0 g l⁻¹; MgSO₄, 3.0 g l⁻¹; yeast extract, 2.0 g l⁻¹; KH₂PO₄. 5.0 g l⁻¹; these were experimentally validated. Under the best conversion conditions, as determined by statistical analysis, the production of succinic acid was carried out in an instrumented bioreactor using sugarcane bagasse hemicellulose hydrolysate, yielding a concentration of 22.5 g l⁻¹.     

Conversion of oleic acid to 10-hydroxystearic acid by whole cells of <Emphasis Type="Italic">Stenotrophomonas nitritireducens</Emphasis>

The optimal reaction conditions for the conversion of oleic acid to 10-hydroxystearic acid by whole cells of Stenotrophomonas nitritireducens were: pH 7.5, 35°C, 0.05% (w/v) Tween 80, 20 g cells l⁻¹, and 30 g oleic acid l⁻¹ in an anaerobic atmosphere. Under these conditions, the cells produced 31.5 g 10-hydroxystearic acid l⁻¹ over 4 h with a conversion yield of 100% (mol/mol) and a productivity of 7.9 g l⁻¹ h⁻¹, indicating that oleic acid was converted completely to 10-hydroxystearic acid, with no detectable byproduct. This is the highest concentration, productivity, and yield of 10-hydroxystearic acid from oleic acid reported thus far.