Detection of a gem-diamine and a stable quinonoid intermediate in the reaction catalyzed by serine–glyoxylate aminotransferase from Hyphomicrobium methylovorum

Background

The enzyme l-serine–glyoxylate aminotransferase (SGAT) from Hyphomicrobium methylovorum is a PLP-containing enzyme that catalyzes the conversion of l-serine and glyoxylate to hydroxypyruvate and glycine. The cloned enzyme expressed in Escherichia coli is isolated as a mixture of the E:PLP and E:PMP forms. The PLP form of the enzyme has a maximum absorbance at 413 nm.

Methods

Uv–visible spectra of SGAT were obtained using an HP-8453 diode array spectrophotometer in the absence and presence of substrates and substrate analogs. Pre-steady state kinetic studies were carried out using an OLIS rapid scanning spectrophotometer in the rapid scanning mode.

Results

Incubation of the enzyme with a saturating concentration D-serine leads to a shift in the 413 nm peak to 421 nm that is ascribed to the external aldimine. The reverse stereochemistry of D-serine does not allow for abstraction of the Cα proton by the ε-amine of the active site lysine residue leading to an abortive external aldimine intermediate. Pre-steady state studies pushing SGAT against d-serine leads to a rapid decrease in the 413 nm peak and an increase at ∼ 330 nm with an associated rate constant of 47 s^− 1 at pH 7.6. This is followed by a slower decrease (0.26 s^− 1) at 330 nm and an increase and shift of the 413 nm peak to 421 nm. The intermediate species that absorbs at ∼ 330 nm is attributed to the gem-diamine intermediate. The rate of the fast phase increases with pH and increase in rate is likely due to the deprotonation of an enzymatic group that accepts a proton from the α-amine of d-serine. In the presence of hydroxypyruvate and ammonia the enzyme spectra display an increase in absorbance at 521 nm that occurs on the order of minutes. The shape and position of the 521 nm species is consistent with a quinonoid intermediate.

General significance

The data suggest a non-enzymatic reaction between hydroxypyruvate and ammonia to form an imine which will be in equilibrium with the enamine. A mechanism is proposed by which the enamine reacts with the PLP form of SGAT to generate the stable highly conjugated quinonoid intermediate.     

Elucidation of the mechanism of N-demethylation catalyzed by cytochrome P450 monooxygenase is facilitated by exploiting nitrogen-15 heavy isotope effects

Tryptophan indole-lyase (Trpase), PBPRA2532, from Photobacterium profundum SS9, a piezophilic marine bacterium, has been cloned, expressed in Escherichia coli, and purified. The P. profundum Trpase (PpTrpase) exhibits similar substrate specificity as the enzyme from E. coli (EcTrpase). PpTrpase has an optimum temperature for activity at about 30 °C, compared with 53 °C for EcTrpase, and loses activity rapidly (t_1/2 ∼ 30 min) when incubated at 50 °C, while EcTrpase is stable up to 65 °C. PpTrpase retains complete activity when incubated more than 3 h at 0 °C, while EcTrpase has only about 20% remaining activity. Under hydrostatic pressure, PpTrpase remains fully active up to 100 MPa (986 atm), while EcTrpase exhibits only about 10% activity at 100 MPa. PpTrpase forms external aldimine and quinonoid intermediates in stopped-flow experiments with l-Trp, S-Et-l-Cys, S-benzyl-l-Cys, oxindolyl-l-Ala, l-Ala and l-Met, similar to EcTrpase. However, with l-Trp a gem-diamine is observed that decays to a quinonoid complex. An aminoacrylate is observed with l-Trp in the presence of benzimidazole, as was seen previously with EcTrpase [28] but not with S-Et-l-Cys. The results show that PpTrpase is adapted for optimal activity in the low temperature, high pressure marine environment.     

Decreased coenzyme A levels in ridA mutant strains of Salmonella enterica result from inactivated serine hydroxymethyltransferase

The RidA/Yer057/UK114 family of proteins is well represented across the domains of life and recent work has defined both an in vitro activity and an in vivo role for RidA. RidA proteins have enamine deaminase activity, and in their absence the reactive 2‐aminoacrylate (2‐AA) accumulates and inactivates at least some pyridoxal 5′‐phosphate (PLP)‐containing enzymes in Salmonella enterica. The conservation of RidA suggested that 2‐AA was a ubiquitous cellular stressor that was generated in central metabolism. Phenotypically, strains of S. enterica that lack RidA accumulated significantly more pyruvate in the growth medium than wild‐type strains. Here we dissected this ridA mutant phenotype and showed it was an indirect consequence of damage to serine hydroxymethyltransferase (GlyA; E.C. 2.1.2.1). The results here identified a fourth PLP enzyme as a target of enamine stress in Salmonella.     

Inactivation of Leuconostoc Mesenteroids NRRL B-512F Dextransucrase by Specific Modification of Lysine Residues with Pyridoxal-5′-Phosphate

Abstract

Dextransucrase from Leuconostoc mesentwoides NRRL B-512F was inactivated by pyridoxal-5′-phosphate (PLP). The inactivation was reversible in as much as the loss of enzyme activity was completely reversed by prolonged dialysis. PLP-modified dextransucrase after reduction with sodium borohydride showed a characteristic fluorescence emission maximum at 397 nm when excited at 325 nm. The stoichiometric results indicated that four lysine residues are modified by PLP under the experimental conditions. These results established for the first time that lysine residues are essential for the activity of dextransucrase.     

Hfq stimulates the activity of the CCA-adding enzyme

Background  

The bacterial Sm-like protein Hfq is known as an important regulator involved in many reactions of RNA metabolism. A prominent function of Hfq is the stimulation of RNA polyadenylation catalyzed by E. coli poly(A) polymerase I (PAP). As a member of the nucleotidyltransferase superfamily, this enzyme shares a high sequence similarity with an other representative of this family, the tRNA nucleotidyltransferase that synthesizes the 3'-terminal sequence C-C-A to all tRNAs (CCA-adding enzyme). Therefore, it was assumed that Hfq might not only influence the poly(A) polymerase in its specific activity, but also other, similar enzymes like the CCA-adding enzyme.     

An Alternative Synthesis of (2R,6R)-(–)-2,6,10-Trimethylundecyl Bromide,the Key Intermediate in the Synthesis of Natural α-Tocopherol

Crystalline aromatic l-amino acid decarboxylase from Micrococcus percitreus is inactive in the absence of pyridoxal phosphate (PLP). The inactive form of the enzyme shows absorption at 340 nm and contains one mol of PLP per mol of enzyme. Binding of PLP to the inactive form is accompanied by a pronounced increase in absorbance at 415 nm. The amount of PLP that binds to this holoenzyme is 2 mol per mol of enzyme. The inactive half-resolved form, i. e. semiapoenzyme, is obtained again by dialysis of the holoenzyme against phosphate buffer. When the semiapoenzyme is dialyzed against phosphate buffer containing 3,4-dihydroxyphenyl-l-alanine, it loses the absorption at 340 nm with the loss of PLP. This apoenzyme regains the activity and absorption at 340 nm and 415 nm on association with PLP.     

Enzymatic synthesis of diastereospecific carbacephem intermediates using serine hydroxymethyltransferase

The serine hydroxymethyltransferase (SHMT) gene glyA was over-expressed in Escherichia coli and the enzyme was purified to near homogeneity. Reaction conditions for E. coli and rabbit liver SHMTs were optimized using succinic semialdehyde methyl ester (SSAME) and glycine. The catalytic efficiency (k _cat/K _m) of E. coli SHMT for SSAME was 2.8-fold higher than that of rabbit liver enzyme. E. coli SHMT displayed a pH-dependent product distribution different from that of rabbit liver enzyme. For the pyridoxal-5′-phosphate (PLP)-dependent reaction, E. coli and rabbit liver SHMTs showed a high product diastereospecificity. The stoichiometric ratio of PLP to the dimeric E. coli SHMT was 0.5–0.7, indicating a requirement for external PLP for maximal activity. Using SSAME or its analog at a high temperature, E. coli SHMT mediated efficient condensation via a lactone pathway. In contrast, at a low temperature, the enzyme catalyzed efficient conversion of 4-penten-1-al via a non-lactone mechanism. Efficient conversion of either aldehyde type to a desirable diastereospecific product was observed at a pilot scale. E. coli SHMT exhibited a broad specificity toward aldehyde substrates; thus it can be broadly useful in chemo-enzymatic synthesis of a chiral intermediate in the manufacture of an important carbacephem antibiotic. Received 02 December 1996/ Accepted in revised form 24 February 1997     

Physiological relation between respiration activity and heterologous expression of selected benzoylformate decarboxylase variants in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Background  

The benzoylformate decarboxylase (BFD) from Pseudomonas putida is a biotechnologically interesting biocatalyst. It catalyses the formation of chiral 2-hydroxy ketones, which are important building blocks for stereoselective syntheses. To optimise the enzyme function often the amino acid composition is modified to improve the performance of the enzyme. So far it was assumed that a relatively small modification of the amino acid composition of a protein does not significantly influence the level of expression or media requirements. To determine, which effects these modifications might have on cultivation and product formation, six different BFD-variants with one or two altered amino acids and the wild type BFD were expressed in Escherichia coli SG13009 pKK233-2. The oxygen transfer rate (OTR) as parameter for growth and metabolic activity of the different E. coli clones was monitored on-line in LB, TB and modified PanG mineral medium with the Respiratory Activity MOnitoring System (RAMOS).     

Inhibition of hydrogen uptake in <Emphasis Type="Italic">Escherichia coli</Emphasis> by expressing the hydrogenase from the cyanobacterium <Emphasis Type="Italic">Synechocystis</Emphasis>sp. PCC 6803

Background  

Molecular hydrogen is an environmentally-clean fuel and the reversible (bi-directional) hydrogenase of the cyanobacterium Synechocystis sp. PCC 6803 as well as the native Escherichia coli hydrogenase 3 hold great promise for hydrogen generation. These enzymes perform the simple reaction 2H⁺ + 2e^- ↔ H₂ (g).     

Characterization of a extreme thermostable fructose-1,6-bisphosphate aldolase from hyperthermophilic bacterium Aquifex aeolicus

Fructose-1,6-bisphosphate (FBP) aldolase, is a glycolytic enzyme that catalyzes the reversible condensation reaction of FBP to dihydroxyacetone phosphate (DHAP) and glyceraldehyde-3-phosphate (G3P). The aldolase gene from Aquifex aeolicus was subcloned, overexpressed in E. coli and purified to 95% homogeneity. The purified enzyme was activated by high concentrations of NH₄⁺ and low concentrations of Co²⁺. The native molecular weight of the purified FBP aldolase was identified as 67 kDa (dimer) by gel filtration chromatography. The enzyme exhibits optimum pH at 6.5 and temperature at 90 °C. Based on the kinetic characterizations, the apparent K_m was calculated to be 4.4 ± 0.07 mM, while V_max was found to be 100 ± 0.02 μM min⁻¹ mg protein⁻¹. The recombinant protein showed extreme heat stability; no activity loss was observed even at 100 °C for 2 h. In addition, the thermophilic enzyme also showed higher stability against several organic solvents viz. acetonitrile, 1,4-dioxane, and methanol. With higher stability against both heat and organic solvents than any other class II aldolase, the A. aeolicus FBP aldolase is an attractive enzyme for use as a biocatalyst for industrial applications.     

Role of aspartate-133 and histidine-458 in the mechanism of tryptophan indole-lyase from Proteus vulgaris

Tryptophan indole-lyase (Trpase) from Proteus vulgaris is a pyridoxal 5'-phosphate dependent enzyme that catalyzes the reversible hydrolytic cleavage of L-Trp to yield indole and ammonium pyruvate. Asp-133 and His-458 are strictly conserved in all sequences of Trpase, and they are located in the proposed substrate-binding region of Trpase. These residues were mutated to alanine to probe their role in substrate binding and catalysis. D133A mutant Trpase has no measurable activity with L-Trp as substrate, but still retains activity with S-(o-nitrophenyl)-L-cysteine, S-alkyl-L-cysteines, and beta-chloro-L-alanine. H458A mutant Trpase has 1.6% of wild-type Trpase activity with L-Trp, and high activity with S-(o-nitrophenyl)-L-cysteine, S-alkyl-L-cysteines, and beta-chloro-L-alanine. H458A mutant Trpase does not exhibit the pK(a) of 5.3 seen in the pH dependence of k(cat)/K(m) of L-Trp for wild-type Trpase. Both mutant enzymes are inhibited by L-Ala, L-Met, and L-Phe, with K(i) values similar to those of wild-type Trpase, but oxindolyl-L-alanine and beta-phenyl-DL-serine show much weaker binding to the mutant enzymes, suggesting that Asp-133 and His-458 are involved in the binding of these ligands. D133A and H458A mutant Trpase exhibit absorption and CD spectra in the presence of substrates and inhibitors that are similar to wild-type Trpase, with peaks at about 420 and 500 nm. The rate constants for formation of the 500 nm bands for the mutant enzymes are equal to or greater than those of wild-type Trpase, indicating that Asp-133 and His-458 do not play a role in the formation of quinonoid intermediates. In constrast to wild-type and H458A mutant Trpase, D133A mutant Trpase forms an intermediate from S-ethyl-L-Cys that absorbs at 345 nm, and is likely to be an alpha-aminoacrylate. Crystals of D133A and H458A mutant Trpase bind amino acids with similar affinity as the proteins in solution, except for L-Ala, which binds to D133A mutant Trpase crystals about 20-fold stronger than in solution. These results suggest that Asp-133 and His-458 play an important role in the elimination reaction of L-Trp. Asp-133 likely forms a hydrogen bond directly to the indole NH of the substrate, while His-458 probably is hydrogen bonded to Asp-133.     

Arg<Superscript>235</Superscript> is an essential catalytic residue of <Emphasis Type="Italic">Bacillus pumilus</Emphasis> DKS1 pectate lyase to degum ramie fibre

After 24 h of incubation with only purified pectate lyase isolated from Bacillus pumilus DKS1 (EF467045), the weight loss of the ramie fibre was found to be 25%. To know the catalytic residue of pectate lyase the pel gene encoding a pectate lyase from the strain Bacillus pumilus DKS1 was cloned in E. coli XL1Blue and expressed in E. coli BL21 (DE3) pLysS. The pel gene was sequenced and showed 1032 bp length. After purification using CM-Sepharose the enzyme showed molecular weight of 35 kDa and maximal enzymatic activity was observed at 60°C and a pH range of 8.5–9.0. Both Ca²⁺ and Mn²⁺ ions were required for activity on Na-pectate salt substrates, while the enzyme was strongly inhibited by Zn²⁺ and EDTA. The deduced nucleotide sequence of the DKS1 pectate lyase (EU652988) showed 90% homology to pectate lyases from Bacillus pumilus SAFR-032 (CP000813). The 3D structure as well as the catalytic residues was predicted using EasyPred software and Catalytic Site Atlas (CSA), respectively. Site directed mutagenesis confirmed that arginine is an essential catalytic residue of DKS1 pectate lyase.     

A comparative summary of expression systems for the recombinant production of galactose oxidase

Background  

The microbes Escherichia coli and Pichia pastoris are convenient prokaryotic and eukaryotic hosts, respectively, for the recombinant production of proteins at laboratory scales. A comparative study was performed to evaluate a range of constructs and process parameters for the heterologous intra- and extracellular expression of genes encoding the industrially relevant enzyme galactose 6-oxidase (EC 1.1.3.9) from the fungus Fusarium graminearum. In particular, the wild-type galox gene from F. graminearum, an optimized variant for E. coli and a codon-optimized gene for P. pastoris were expressed without the native pro-sequence, but with a His-tag either at the N- or the C-terminus of the enzyme.     

The Amidase Domain of Lipoamidase Specifically Inactivates Lipoylated Proteins In Vivo

Background

In the 1950s, Reed and coworkers discovered an enzyme activity in Streptococcus faecalis (Enterococcus faecalis) extracts that inactivated the Escherichia. coli and E. faecalis pyruvate dehydrogenase complexes through cleavage of the lipoamide bond. The enzyme that caused this lipoamidase activity remained unidentified until Jiang and Cronan discovered the gene encoding lipoamidase (Lpa) through the screening of an expression library. Subsequent cloning and characterization of the recombinant enzyme revealed that lipoamidase is an 80 kDa protein composed of an amidase domain containing a classic Ser-Ser-Lys catalytic triad and a carboxy-terminal domain of unknown function. Here, we show that the amidase domain can be used as an in vivo probe which specifically inactivates lipoylated enzymes.

Methodology/Principal Findings

We evaluated whether Lpa could function as an inducible probe of α-ketoacid dehydrogenase inactivation using E. coli as a model system. Lpa expression resulted in cleavage of lipoic acid from the three lipoylated proteins expressed in E. coli, but did not result in cleavage of biotin from the sole biotinylated protein, the biotin carboxyl carrier protein. When expressed in lipoylation deficient E. coli, Lpa is not toxic, indicating that Lpa does not interfere with any other critical metabolic pathways. When truncated to the amidase domain, Lpa retained lipoamidase activity without acquiring biotinidase activity, indicating that the carboxy-terminal domain is not essential for substrate recognition or function. Substitution of any of the three catalytic triad amino acids with alanine produced inactive Lpa proteins.

Conclusions/Significance

The enzyme lipoamidase is active against a broad range of lipoylated proteins in vivo, but does not affect the growth of lipoylation deficient E. coli. Lpa can be truncated to 60% of its original size with only a partial loss of activity, resulting in a smaller probe that can be used to study the effects of α-ketoacid dehydrogenase inactivation in vivo.     

A fed‐batch based cultivation mode in Escherichia coli results in improved specific activity of a novel chimeric‐truncated form of tissue plasminogen activator

Aims

A novel chimeric‐truncated form of tissue‐type plasminogen activator (t‐PA) with improved fibrin affinity and resistance to PAI was successfully produced in CHO expression system during our previous studies. Considering advantages of prokaryotic expression systems, the aim in this study was to produce the novel protein in Escherichia coli (BL21) strain and compare the protein potency in batch and fed‐batch processes.

Methods and Results

The expression cassette for the novel t‐PA was prepared in pET‐28a(+). The E. coli expression procedure was compared in traditional batch and newly developed fed batch, EnBase^® Flo system. The protein was purified in soluble format, and potency results were identified using Chromolize t‐PA Assay Kit. The fed‐batch fermentation mode, coupled with a Ni‐NTA affinity purification procedure under native condition, resulted in higher amounts of soluble protein, and about a 30% of improvement in the specific activity of the resulted recombinant protein (46·66 IU mg^?1) compared to traditional batch mode (35·8 IU mg^?1).

Conclusions

Considering the undeniable advantages of expression in the prokaryotic expression systems such as E. coli for recombinant protein production, applying alternative methods of cultivation is a promising approach. In this study, fed‐batch cultivation methods showed the potential to replace miss‐folded formats of protein with proper folded, soluble form with improved potency.

Significance and Impact of the Study

Escherichia coli expression of recombinant proteins still counts for nearly 40% of marketed biopharmaceuticals. The major drawback of this system is the lack of appropriate post‐translational modifications, which may cause potency loss/decline. Therefore, applying alternative methods of cultivation as investigated here is a promising approach to overcome potency decrease problem in this protein production system.     

Enhanced γ-aminobutyric acid-forming activity of recombinant glutamate decarboxylase (gadA) from Escherichia coli

γ-aminobutyric acid (GABA) is an important bioactive regulator, and its biosynthesis is primarily through the α-decarboxylation of glutamate by glutamate decarboxylase (GAD). The procedures to obtain GABA by bioconvertion with high activity recombinant Escherichia coli GAD have been seldom understood. In this study, Escherichia coli GAD (gadA) was highly expressed (about 70–75% of total protein) as soluble protein in Escherichia coli BL21(DE3) containing pET28a-gadA, which was induced by 0.4 mM IPTG in LB medium, and maximal GABA-forming activity of the recombinant GAD was 40 U/mL at a concentration (0.15 mM) of pyridoxal phosphate (PLP) and a concentration (0.6 mM) of Ca²⁺ at optimal pH of 3.8. The optimal concentration (7.5 mM) of Mn²⁺ can also improve the activity of recombinant enzyme, but the co-effect of Ca²⁺ and Mn²⁺ exhibited antagonism effect when added simultaneously. LB and 0.1% (w/v) lactose were selected as culture medium and inducer, respectively. The relative activity was markedly higher activated by Ca²⁺ (174%), Mn²⁺ (164%) than that by other seven bivalent cations. Finally, the yield of GABA was high of 94 g/L detected by paper chromatography or HPLC in 1 L reaction system with 30 mL crude GAD (12 U/mL). By entrapping Escherichia coli glutamate decarboxylase into sodium alginate and carrageenan gel beads, the activity of immobilized GAD (IGAD) remained 85% during the initial five batches and the activity still remained 50% at the tenth batch, these results indicated that the recombinant Escherichia coli GAD was feasible for the future industrial production of GABA.     

Host cell and expression engineering for development of an <Emphasis Type="Italic">E. coli</Emphasis> ketoreductase catalyst: Enhancement of formate dehydrogenase activity for regeneration of NADH

Background  

Enzymatic NADH or NADPH-dependent reduction is a widely applied approach for the synthesis of optically active organic compounds. The overall biocatalytic conversion usually involves in situ regeneration of the expensive NAD(P)H. Oxidation of formate to carbon dioxide, catalyzed by formate dehydrogenase (EC 1.2.1.2; FDH), presents an almost ideal process solution for coenzyme regeneration that has been well established for NADH. Because isolated FDH is relatively unstable under a range of process conditions, whole cells often constitute the preferred form of the biocatalyst, combining the advantage of enzyme protection in the cellular environment with ease of enzyme production. However, the most prominent FDH used in biotransformations, the enzyme from the yeast Candida boidinii, is usually expressed in limiting amounts of activity in the prime host for whole cell biocatalysis, Escherichia coli. We therefore performed expression engineering with the aim of enhancing FDH activity in an E. coli ketoreductase catalyst. The benefit resulting from improved NADH regeneration capacity is demonstrated in two transformations of technological relevance: xylose conversion into xylitol, and synthesis of (S)-1-(2-chlorophenyl)ethanol from o-chloroacetophenone.     

Overexpression of biotin synthase and biotin ligase is required for efficient generation of sulfur-35 labeled biotin in <Emphasis Type="Italic">E. coli</Emphasis>

Background  

Biotin is an essential enzyme cofactor that acts as a CO₂ carrier in carboxylation and decarboxylation reactions. The E. coli genome encodes a biosynthetic pathway that produces biotin from pimeloyl-CoA in four enzymatic steps. The final step, insertion of sulfur into desthiobiotin to form biotin, is catalyzed by the biotin synthase, BioB. A dedicated biotin ligase (BirA) catalyzes the covalent attachment of biotin to biotin-dependent enzymes. Isotopic labeling has been a valuable tool for probing the details of the biosynthetic process and assaying the activity of biotin-dependent enzymes, however there is currently no established method for ³⁵S labeling of biotin.     

Molecular characterization of alanine racemase from Bifidobacterium bifidum

Bifidobacterium bifidum is a useful probiotic agent exhibiting health-promoting properties, and its peptidoglycans have the potential for applications in the fields of food science and medicine. We investigated the bifidobacterial alanine racemase, which is essential in the synthesis of -alanine as an essential component of the peptidoglycans. Alanine racemase was purified to homogeneity from a crude extract of B. bifidum NBRC 14252. It consisted of two identical subunits with a molecular mass of 50 kDa. The enzyme required pyridoxal 5′-phosphate (PLP) as a coenzyme. The activity was lost in the presence of a thiol-modifying agent. The enzyme almost exclusively catalyzed the alanine racemization; other amino acids tested, except for serine, were inactive as substrates. The kinetic parameters of the enzyme suggested that the B. bifidum alanine racemase possesses comparatively low affinities for both the coenzyme (9.1 μM for PLP) and substrates (44.3 mM for -alanine; 74.3 mM for -alanine). The alr gene encoding the alanine racemase was cloned and sequenced. The alr gene complemented the -alanine auxotrophy of Escherichia coli MB2795, and an abundant amount of the enzyme was produced in cells of the E. coli MB2795 clone. The enzymologic and kinetic properties of the purified recombinant enzyme were almost the same as those of the alanine racemase from B. bifidum NBRC 14252.