Ca2+-dependent activity of human DNase I and its hyperactive variants.

We have recently constructed hyperactive human deoxyribonuclease I (DNase I) variants that digest double-stranded DNA more efficiently under physiological saline conditions by introducing positively charged amino acids at eight positions that can interact favorably with the negatively charged DNA phosphates. In this study, we present data from supercoiled DNA nicking, linear DNA digestion, and hyperchromicity assays that distinguish two classes of DNase I hyperactive variants based upon their activity dependence on Ca2+. Class A variants are highly dependent upon Ca2+, having up to 300-fold lower activity in the presence of Mg2+ alone compared to that in the presence of Mg2+ and Ca2+, and include Q9R, H44K, and T205K, in addition to wild-type DNase I. In contrast, the catalytic activity of Class B variants, which comprise the E13R, T14K, N74K, S75K, and N110R hyperactive variants, is relatively Ca2+ independent. A significant proportion of this difference in Ca2+-dependent activity can be attributed to one of the two structural calcium binding sites in DNase I. Compared to wild-type, the removal of Ca2+ binding site 2 by alanine replacements at Asp99, Asp107, and Glu112 decreased activity up to 26-fold in the presence of Mg2+ and Ca2+, but had no effect in the presence of Mg2+ alone. We propose that the rate-enhancing effect of Ca2+ binding at site 2 can be replaced by favorable electrostatic interactions created by proximal positively charged amino acid substitutions such as those found in the Class B variants, thus reducing the dependence on Ca2+.     

Binding of Insulin-like Growth Factor (IGF)–Binding Protein-5 to Smooth-Muscle Cell Extracellular Matrix Is a Major Determinant of the Cellular Response to IGF-I

Insulin-like growth factor–binding protein-5 (IGFBP-5) has been shown to bind to fibroblast extracellular matrix (ECM). Extracellular matrix binding of IGFBP-5 leads to a decrease in its affinity for insulin-like growth factor-I (IGF-I), which allows IGF-I to better equilibrate with IGF receptors. When the amount of IGFBP-5 that is bound to ECM is increased by exogenous addition, IGF-I’s effect on fibroblast growth is enhanced. In this study we identified the specific basic residues in IGFBP-5 that mediate its binding to porcine smooth-muscle cell (pSMC) ECM. An IGFBP-5 mutant containing alterations of basic residues at positions 211, 214, 217, and 218 had the greatest reduction in ECM binding, although three other mutants, R214A, R207A/K211N, and K202A/R206N/R207A, also had major decreases. In contrast, three other mutants, R201A/K202N/R206N/R208A, and K217N/R218A and K211N, had only minimal reductions in ECM binding. This suggested that residues R207 and R214 were the most important for binding, whereas alterations in K211 and R218, which align near them, had minimal effects. To determine the effect of a reduction in ECM binding on the cellular replication response to IGF-I, pSMCs were transfected with the mutant cDNAs that encoded the forms of IGFBPs with the greatest changes in ECM binding. The ECM content of IGFBP-5 from cultures expressing the K211N, R214A, R217A/R218A, and K202A/R206N/R207A mutants was reduced by 79.6 and 71.7%, respectively, compared with cells expressing the wild-type protein. In contrast, abundance of the R201A/K202N/R206N/R208A mutant was reduced by only 14%. Cells expressing the two mutants with reduced ECM binding had decreased DNA synthesis responses to IGF-I, but the cells expressing the R201A/K202N/R206N/R208A mutant responded well to IGF-I. The findings suggest that specific basic amino acids at positions 207 and 214 mediate the binding of IGFBP-5 to pSMC/ECM. Smooth-muscle cells that constitutively express the mutants that bind weakly to ECM are less responsive to IGF-I, suggesting that ECM binding of IGFBP-5 is an important variable that determines cellular responsiveness.     

Site-directed Mutagenesis of the Catalytic Residues of Bovine Pancreatic Deoxyribonuclease I

Bovine pancreatic deoxyribonuclease I (DNase I) is a well characterised endonuclease which cleaves double-stranded DNA to yield 5′ phosphory lated polynucleotides. Co-crystal structures of DNase I with two different oligonucleotides have revealed the presence of several residues (R9, E78, H134, D168, D212 and H252) close to the scissile phosphate. The roles that these amino acids play in the catalytic mechanism have been investigated using site-directed mutagenesis. The following variants were used: R9A, E78T, H134Q, D168S, D212S and H252Q. The kinetics of all six mutants with both DNA and a small chromophoric substrate, thymidine-3′,5′-di(p- nitrophenyl)-phosphate, were studied. Only R9A and E78T showed any significant turnover of the two substrates. D168S, H134Q, D212S and H252Q showed vanishingly low activities towards DNA and no detectable activity with thymidine-3′,5′-di-n(p-nitrophenyl)-phosphate. These results demonstrate that H134, D168, D212 and H252 play a critical role in the catalytic mechanism. It is suggested that H134 and H252 (which are hydrogen-bonded to E78 and D212, respectively) provided general acid and general base catalysis. DNase I also requires Mg^{2 +}and E39 has been identified as a ligand for this metal ion. We propose that D168 serves as a ligand for a second Mg^{2 +}, and thus DNase I, uses a two metal-ion hydrolytic mechanism. Both magnesium ions are used to supply electrophilic catalysis. Role assignment is based on the mutagenesis results, structural information, homologies between DNase I from different species and a comparison with exonuclease III. However, it is still not feasible to unequivocally assign a particular catalytic role to each amino acid/metal ion.     

3'-5' exonuclease of Klenow fragment: role of amino acid residues within the single-stranded DNA binding region in exonucleolysis and duplex DNA melting

The mechanism of the 3'-5' exonuclease activity of the Klenow fragment of DNA polymerase I has been investigated with a combination of biochemical and spectroscopic techniques. Site-directed mutagenesis was used to make alanine substitutions of side chains that interact with the DNA substrate on the 5' side of the scissile phosphodiester bond. Kinetic parameters for 3'-5' exonuclease cleavage of single- and double-stranded DNA substrates were determined for each mutant protein in order to probe the role of the selected side chains in the exonuclease reaction. The results indicate that side chains that interact with the penultimate nucleotide (Q419, N420, and Y423) are important for anchoring the DNA substrate at the active site or ensuring proper geometry of the scissile phosphate. In contrast, side chains that interact with the third nucleotide from the DNA terminus (K422 and R455) do not participate directly in exonuclease cleavage of single-stranded DNA. Alanine substitutions of Q419, Y423, and R455 have markedly different effects on the cleavage of single- and double-stranded DNA, causing a much greater loss of activity in the case of a duplex substrate. Time-resolved fluorescence anisotropy decay measurements with a dansyl-labeled primer/template indicate that the Q419A, Y423A, and R455A mutations disrupted the ability of the Klenow fragment to melt duplex DNA and bind the frayed terminus at the exonuclease site. In contrast, the N420A mutation stabilized binding of a duplex terminus to the exonuclease site, suggesting that the N420 side chain facilitates the 3'-5' exonuclease reaction by introducing strain into the bound DNA substrate. Together, these results demonstrate that protein side chains that interact with the second or third nucleotides from the terminus can participate in both the chemical step of the exonuclease reaction, by anchoring the substrate in the active site or by ensuring proper geometry of the scissile phosphate, and in the prechemical steps of double-stranded DNA hydrolysis, by facilitating duplex melting.     

Mutational analysis of human DNase I at the DNA binding interface: implications for DNA recognition,catalysis, and metal ion dependence.

Human deoxyribonuclease I (DNase I), an enzyme used to treat cystic fibrosis patients, has been systematically analyzed by site-directed mutagenesis of residues at the DNA binding interface. Crystal structures of bovine DNase I complexed with two different oligonucleotides have implicated the participation of over 20 amino acids in catalysis or DNA recognition. These residues have been classified into four groups based on the characterization of over 80 human DNase I variants. Mutations at any of the four catalytic amino acids His 134, His 252, Glu 78, and Asp 212 drastically reduced the hydrolytic activity of DNase I. Replacing the three putative divalent metal ion-coordinating residues Glu 39, Asp 168, or Asp 251 led to inactive variants. Amino acids Gln 9, Arg 41, Tyr 76, Arg 111, Asn 170, Tyr 175, and Tyr 211 were also critical for activity, presumably because of their close proximity to the active site, while more peripheral DNA interactions stemming from 13 other positions were of minimal significance. The relative importance of these 27 positions is consistent with evolutionary relationships among DNase I across different species, DNase I-like proteins, and bacterial sphingomyelinases, suggesting a fingerprint for a family of DNase I-like proteins. Furthermore, we found no evidence for a second active site that had been previously implicated in Mn2+-dependent DNA degradation. Finally, we correlated our mutational analysis of human DNase I to that of bovine DNase I with respect to their specific activity and dependence on divalent metal ions.     

Identification and characterization of LDL receptor gene mutations in hyperlipidemic Chinese

DNA screening for LDL receptor mutations was performed in 170 unrelated hyperlipidemic Chinese patients and two clinically diagnosed familial hypercholesterolemia patients. Two deletions (Del e3-5 and Del e6-8), eight point mutations (W-18X, D69N, R94H, E207K, C308Y, I402T, A410T, and A696G), and two polymorphisms (A370T and I602V) were identified. Of these mutations, C308Y and Del e6-8 were found in homozygosity, and D69N and C308Y were seen in unrelated patients. The effects of mutations on LDL receptor function were characterized in COS-7 cells. The LDL receptor level and activity were close to those of wild type in A696G transfected cells. A novel intermediate protein and reduction of LDL receptor activity were seen in D69N transfected cells. For R94H, E207K, C308Y, I402T, and A410T mutations, only approximately 20-64% of normal receptor activities were seen. Conversely, Del e3-5 and Del e6-8 lead to defective proteins with approximately 0-13% activity. Most of the mutant receptors were localized intracellularly, with a staining pattern resembling that of the endoplasmic reticulum and Golgi apparatus (D69N, R94H, E207K, C308Y, and I402T) or endosome/lysosome (A410T and Del e6-8). Molecular analysis of the LDL receptor gene will clearly identify the cause of the patient's hyperlipidemia and allow appropriate early treatment as well as antenatal and family studies.     

The complete amino acid sequence of the low molecular weight cytosolic acid phosphatase

This paper presents the complete amino acid sequence of the low molecular weight acid phosphatase from bovine liver. This isoenzyme of the acid phosphatase family is located in the cytosol, is not inhibited by L-(+)-tartrate and fluoride ions, but is inhibited by sulfhydryl reagents. The enzyme consists of 157 amino acid residues, has an acetylated NH2 terminus, and has arginine as the COOH-terminal residue. All 8 half-cystine residues are in the free thiol form. The molecular weight calculated from the sequence is 17,953. The sequence was determined by characterizing the peptides purified by reverse-phase high performance liquid chromatography from tryptic, thermolytic, peptic, Staphylococcus aureus protease, and chymotryptic digests of the carboxymethylated protein. No sequence homologies were found with the two known acylphosphatase isoenzymes or the metalloproteins porcine uteroferrin and purple acid phosphatase from bovine spleen (both of which have acid phosphatase activity). Two half-cystines at or near the active site were identified through the reaction of the enzyme with [14C] iodoacetate in the presence or in the absence of a competitive inhibitor (i.e. inorganic phosphate). Ac-A E Q V T K S V L F V C L G N I C R S P I A E A V F R K L V T D Q N I S D N W V I D S G A V S D W N V G R S P N P R A V S C L R N H G I N T A H K A R Q V T K E D F V T F D Y I L C M D E S N L R D L N R K S N Q V K N C R A K I E L L G S Y D P Q K Q L I I E D P Y Y G N D A D F E T V Y Q Q C V R C C R A F L E K V R-OH.     

X-ray structure of the DNase I-d(GGTATACC)2 complex at 2.3 A resolution.

The crystal structure of a complex between DNase I and the self-complementary octamer duplex d(GGTATACC)2 has been solved using the molecular replacement method and refined to a crystallographic R-factor of 18.8% for all data between 6.0 and 2.3 A resolution. In contrast to the structure of the DNase I-d(GCGATCGC)2 complex solved previously, the DNA remains uncleaved in the crystal. The general architecture of the two complexes is highly similar. DNase I binds in the minor groove of a right-handed DNA duplex, and to the phosphate backbones on either side over five base-pairs, resulting in a widening of the minor groove and a concurrent bend of the DNA away from the bound enzyme. There is very little change in the structure of the DNase I on binding the substrate. Many other features of the interaction are conserved in the two complexes, in particular the stacking of a deoxyribose group of the DNA onto the side-chain of a tyrosine residue (Y76), which affects the DNA conformation and the binding of an arginine side-chain in the minor groove. Although the structures of the DNA molecules appear at first sight rather similar, detailed analysis reveals some differences that may explain the relative resistance of the d(GGTATACC)2 duplex to cleavage by DNase I: whilst some backbone parameters are characteristic of a B-conformation, the spatial orientation of the base-pairs in the d(GGTATACC)2 duplex is close to that generally observed in A-DNA. These results further support the hypothesis that the minor-groove width and depth and the intrinsic flexibility of DNA are the most important parameters affecting the interaction. The disposition of residues around the scissile phosphate group suggests that two histidine residues, H134 and H252, are involved in catalysis.     

Involvement of conserved histidine, lysine and tyrosine residues in the mechanism of DNA cleavage by the caspase-3 activated DNase CAD

The caspase-activated DNase (CAD) is involved in DNA degradation during apoptosis. Chemical modification of murine CAD with the lysine-specific reagent 2,4,6-trinitrobenzenesulphonic acid and the tyrosine-specific reagent N-acetylimidazole leads to inactivation of the nuclease, indicating that lysine and tyrosine residues are important for DNA cleavage by this enzyme. The presence of DNA or the inhibitor ICAD-L protects the enzyme from modification. Amino acid substitution in murine CAD of lysines and tyrosines conserved in CADs from five different species leads to variants with little if any catalytic activity, but unaltered DNA binding (K155Q, K301Q, K310Q, Y247F), with the exception of Y170F, which retains wild-type activity. Similarly, as observed for the previously characterised H242N, H263N, H308N and H313N variants, the newly introduced His→Asp/Glu or Arg exchanges lead to variants with <1% of wild-type activity, with two exceptions: H313R shows wild-type activity, and H308D at pH 5.0 exhibits ~5% of wild-type activity at this pH. Y170F and H313R produce a specific pattern of fragments, different from wild-type CAD, which degrades DNA non-specifically. The recombinant nuclease variants produced in Escherichia coli were tested for their ability to form nucleolytically active oligomers. They did not show any significant deviation from the wild-type enzyme. Based on these and published data possible roles of the amino acid residues under investigation are discussed.     

Residues within transmembrane helices 2 and 5 of the human gonadotropin-releasing hormone receptor contribute to agonist and antagonist binding

To understand the ligand binding properties of the human GnRH receptor (hGnRH-R), 24 site-specific mutants within transmembrane helices (TMH) 1, 2, and 5 and the extracellular loop 2 (E2) were generated. These mutants were analyzed by using a functional reporter gene assay, monitoring receptor signaling via adenylate cyclase to a cAMP-responsive element fused to Photinus pyralis luciferase. The functional behavior of 14 receptor mutants, capable of G-protein coupling and signaling, was studied in detail with different well described agonistic and antagonistic peptide ligands. Furthermore, the binding constants were determined in displacement binding experiments with the antagonist [125I]Cetrorelix. The substitution of residues K36, Q204, W205, H207, Q208, F20, F213, F216, and S217 for alanine had no or only a marginal effect on ligand binding and signaling. In contrast, substitution of N87, Eg9, D9, R179, W206, Y211, F214, and T215 for alanine resulted in receptor proteins neither capable of ligand binding nor signal transduction. Within those mutants affecting ligand binding and signaling to various degrees, W101A, N102A, and N212Q differentiate between agonists and antagonists. Thus, in addition to N102 already described, the residues W101 in TMH2 and N212 in TMH5 are important for the architecture of the ligand-binding pocket. Based on the experimental data, three-dimensional models for binding of the superagonist D-Trp6-GnRH (Triptorelin) and the antagonist Cetrorelix to the hGnRH-R are proposed. Both decapeptidic ligands are bound to the receptor in a bent conformation with distinct interactions within the binding pocket formed by all TMHs, E2, and E3. The antagonist Cetrorelix with bulky hydrophobic N-terminal amino acids interacts with quite different receptor residues, a hint at the failure to induce an active, G protein-coupling receptor conformation.     

PvuII-endonuclease induces structural alterations at the scissile phosphate group of its cognate DNA

We investigated the PvuII endonuclease with its cognate DNA by means of molecular dynamics simulations. Comparing the complexed DNA with a reference simulation of free DNA, we saw structural changes at the scissile phosphodiester bond. At this GpC step, the enzyme induces the highest twist and axial rise, inclination is increased and the minor groove widened. The distance between the scissile phosphate group and the phosphate group of the following thymine base is shortened significantly, indicating a substrate-assisted catalysis. A feasible reason for this vicinity is the catalytically important amino acid residue lysine 70, which bridges the free oxygen atoms of the successive phosphate groups. Due to this geometry, a compact reaction pocket is formed where a water molecule can be held, thus bringing the reaction partners for hydrolysis into contact. The O1-P-O2 angle of the scissile nucleotide is decreased, probably due to a complexation of the negative oxygen atoms through protein and solvent contacts.     

Conversion of bovine pancreatic DNase I to a repair endonuclease with a high selectivity for abasic sites.

Bovine pancreatic deoxyribonuclease I (DNase I) is a nuclease of relatively low specificity which interacts with DNA in the minor groove. No contacts are made between the protein and the major groove of the nucleic acid. DNase I is structurally homologous to exonuclease III, a DNA-repair enzyme with multiple activities. One of the main differences between the two enzymes is the presence of an additional alpha-helix in exonuclease III, in a position suggestive of interaction with the major groove of DNA. Recombinant DNA techniques have been used to add 14 amino acids, comprising the 10 amino acids of the exonuclease III alpha-helix flanked by a glycine rich region, to DNase I. The polypeptide has been inserted after serine 174, an amino acid on the surface of DNase I corresponding to the location of the extra alpha-helix in exonuclease III. The recombinant protein, DNase-exohelix, has been purified and its catalytic activities towards DNA investigated. The recombinant protein demonstrated a high selectivity for endonucleolytic cleavage at abasic sites in DNA, a property of exonuclease III but not native DNase I. Thus the insertion of 14 amino acids at Ser174, converts DNase I to an exonuclease III-like enzyme with DNA-repair properties.     

Complete reversal of coenzyme specificity of xylitol dehydrogenase and increase of thermostability by the introduction of structural zinc

Pichia stipitis NAD(+)-dependent xylitol dehydrogenase (XDH), a medium-chain dehydrogenase/reductase, is one of the key enzymes in ethanol fermentation from xylose. For the construction of an efficient biomass-ethanol conversion system, we focused on the two areas of XDH, 1) change of coenzyme specificity from NAD(+) to NADP(+) and 2) thermostabilization by introducing an additional zinc atom. Site-directed mutagenesis was used to examine the roles of Asp(207), Ile(208), Phe(209), and Asn(211) in the discrimination between NAD(+) and NADP(+). Single mutants (D207A, I208R, F209S, and N211R) improved 5 approximately 48-fold in catalytic efficiency (k(cat)/K(m)) with NADP(+) compared with the wild type but retained substantial activity with NAD(+). The double mutants (D207A/I208R and D207A/F209S) improved by 3 orders of magnitude in k(cat)/K(m) with NADP(+), but they still preferred NAD(+) to NADP(+). The triple mutant (D207A/I208R/F209S) and quadruple mutant (D207A/I208R/F209S/N211R) showed more than 4500-fold higher values in k(cat)/K(m) with NADP(+) than the wild-type enzyme, reaching values comparable with k(cat)/K(m) with NAD(+) of the wild-type enzyme. Because most NADP(+)-dependent XDH mutants constructed in this study decreased the thermostability compared with the wild-type enzyme, we attempted to improve the thermostability of XDH mutants by the introduction of an additional zinc atom. The introduction of three cysteine residues in wild-type XDH gave an additional zinc-binding site and improved the thermostability. The introduction of this mutation in D207A/I208R/F209S and D207A/I208R/F209S/N211R mutants increased the thermostability and further increased the catalytic activity with NADP(+).     

Prediction of substrate-binding site and elucidation of catalytic residue of a phytase from Bacillus sp

The present study primarily deals with the identification of substrate-binding site and elucidation of catalytic residue of the phytase from Bacillus sp. (Genbank Accession No. EF536824) employing molecular modeling and site-directed mutagenesis. Homology-based modeling of the Bacillus phytase revealed β-propeller structure with twelve active-site aminoacid residues, viz., D75, R77, Y78, H138, Q140, D189, D190, E191, Y238, Y239, N346 and R348. Docking of substrate Ins(1,2,3,4,5,6)hexakisphosphate with the phytase model disclosed interaction of Y78 residue with the sixth position phosphate, while D75 and R77 residues revealed hydrogen bonding with the fifth position phosphate of the phytate. Analysis of hydrolysis products of phytate indicated the sequential removal of alternate phosphates, resulting in the formation of final product Ins triphosphate. Mutant phytases Y78A/F, derived from site-directed mutagenesis, exhibited complete loss of enzyme activity despite substrate binding, thereby suggesting the intrinsic role of Y78 residue in the catalytic activity. The Bacillus mutant phytases can be used to generate enzyme crystals complexed with phytate and lower Ins phosphates for indepth analysis of substrate binding and catalytic activity of the enzyme.     

The complete amino acid sequence of coagulogen isolated from Southeast Asian horseshoe crab, Carcinoscorpius rotundicauda

The complete amino acid sequence of coagulogen purified from the hemocytes of the horseshoe crab Carcinoscorpius rotundicauda was determined by characterization of the NH2-terminal sequence and the peptides generated after digestion of the protein with lysyl endopeptidase, Staphylococcal aureus protease V8 and trypsin. Upon sequencing the peptides by the automated Edman method, the following sequence was obtained: A D T N A P L C L C D E P G I L G R N Q L V T P E V K E K I E K A V E A V A E E S G V S G R G F S L F S H H P V F R E C G K Y E C R T V R P E H T R C Y N F P P F V H F T S E C P V S T R D C E P V F G Y T V A G E F R V I V Q A P R A G F R Q C V W Q H K C R Y G S N N C G F S G R C T Q Q R S V V R L V T Y N L E K D G F L C E S F R T C C G C P C R N Y Carcinoscorpius coagulogen consists of a single polypeptide chain with a total of 175 amino acid residues and a calculated molecular weight of 19,675. The secondary structure calculated by the method of Chou and Fasman reveals the presence of an alpha-helix region in the peptide C segment (residue Nos. 19 to 46), which is released during the proteolytic conversion of coagulogen to coagulin gel. The beta-sheet structure and the 16 half-cystines found in the molecule appear to yield a compact protein stable to acid and heat. The amino acid sequences of coagulogen of four species of limulus have been compared and the interspecies evolutionary differences are discussed.     

DNase,RNase, and phosphatase activities of antibodies formed upon immunization by DNA,DNase I,and DNase II

Relative DNase, RNase (efficiency of hydrolysis of ribo- and deoxyribooligonucleotides (ON)), and phosphatase (removal of the ON 5′ terminal phosphate) catalytic activities of antibodies (AB) obtained after rabbit immunization by DNA, DNase I, and DNase II were compared. It is shown that electrophoretically homogeneous preparations of polyclonal AB from non-immunized rabbits did not exhibit such activities. Immunization of rabbits by DNA, DNase I, and DNase II results in generation of IgG abzymes that exhibit high activity in the ON hydrolysis reaction and even higher activity in cleavage of 5′ terminal phosphate of ON. In this case K _m values for supercoiled plasmid DNA and ON found in reactions of their AB-dependent nuclease hydrolysis and phosphatase cleavage of 5′ terminal phosphate differ by 2–4 orders of magnitude. This shows that nuclease and phosphatase activities belong to different abzyme fractions within polyclonal AB. Thus, in this work data indicative of the possibility of a formation of antibodies exhibiting phosphatase activity after immunization of animals with DNA, DNase I, and DNase II, were obtained for the first time. Possible reasons for production of AB with phosphatase activity after immunization of rabbits with these immunogens are discussed.     

A novel bipartite mode of binding of M. smegmatis topoisomerase I to its recognition sequence

We have investigated interaction of Mycobacterium smegmatis topoisomerase I at its specific recognition sequence. DNase I footprinting demonstrates a large region of protection on both the scissile and non-scissile strands of DNA. Methylation protection and interference analyses reveal base-specific contacts within the recognition sequence. Missing contact analyses reveal additional interactions with the residues in both single and double-stranded DNA, and hence underline the role for the functional groups associated with those bases. These interactions are supplemented by phosphate contacts in the scissile strand. Conformation specific probes reveal protein-induced structural distortion of the DNA helix at the T-A-T-A sequence 11 bp upstream to the recognition sequence. Based on these footprinting analyses that define parameters of topoisomerase I-DNA interactions, a model of topoisomerase I binding to its substrate is presented. Within the large protected region of 30 bp, the enzyme makes direct contact at two locations in the scissile strand, one around the cleavage site and the other 8-12 bases upstream. Thus the enzyme makes asymmetric recognition of DNA and could carry out DNA relaxation by either of the two proposed mechanisms: enzyme bridged and restricted rotation.     

Residues of E. coli topoisomerase I conserved for interaction with a specific cytosine base to facilitate DNA cleavage

Bacterial and archaeal topoisomerase I display selectivity for a cytosine base 4 nt upstream from the DNA cleavage site. Recently, the solved crystal structure of Escherichia coli topoisomerase I covalently linked to a single-stranded oligonucleotide revealed that R169 and R173 interact with the cytosine base at the −4 position via hydrogen bonds while the phenol ring of Y177 wedges between the bases at the −4 and the −5 position. Substituting R169 to alanine changed the selectivity of the enzyme for the base at the −4 position from a cytosine to an adenine. The R173A mutant displayed similar sequence selectivity as the wild-type enzyme, but weaker cleavage and relaxation activity. Mutation of Y177 to serine or alanine rendered the enzyme inactive. Although mutation of each of these residues led to different outcomes, R169, R173 and Y177 work together to interact with a cytosine base at the −4 position to facilitate DNA cleavage. These strictly conserved residues might act after initial substrate binding as a Molecular Ruler to form a protein–DNA complex with the scissile phosphate positioned at the active site for optimal DNA cleavage by the tyrosine hydroxyl nucleophile to facilitate DNA cleavage in the reaction pathway.