Selection of Dictyostelium discoideum transformants and analysis of vector maintenance using live bacteria resistant to G418.

A protocol that allows the rapid isolation and growth of large numbers of independent G418-resistant Dictyostelium discoideum transformant colonies on the surface of agar media with live bacteria was developed. Transformants grown under these conditions form normal fruiting bodies. Discovery that aggregation of nontransformants was inhibited at a nonselective level of G418 (25 to 35 micrograms/ml) led to the development of a vector maintenance assay. Using this assay we examined the stability of recombinant plasmids derived from the D. discoideum native plasmids Ddp1 and Ddp2. We conclude that the origin of replication of plasmid Ddp1 does not alone confer stable maintenance and thus, Ddp1 must bear additional sequences required for its own maintenance. Analysis of the maintenance of vectors derived from Ddp2 showed that autonomously replicating shuttle vectors that contained bacterial plasmid DNA and from which one element of the Ddp2 inverted repeat was removed were much less stable than vectors that contained a complete inverted repeat or that did not carry a bacterial plasmid. Sequences between the 3' end of the rep gene and the inverted repeat appear to play a role in plasmid maintenance. An intact rep gene and one copy of the inverted repeat element were required for extrachromosomal replication. Maintenance of extrachromosomal vectors was found to be strain dependent. Four traits distinguishing integrating vectors from those capable of autonomous replication were identified.     

Genetic manipulation of Bacillus methanolicus, a gram-positive, thermotolerant methylotroph.

We report the fist genetic transformation system, shuttle vectors, and integrative vectors for the thermotolerant, methylotrophic bacterium Bacillus methanolicus. By using a polyethylene glycol-mediated transformation procedure, we have successfully transformed B. methanolicus with both integrative and multicopy plasmids. For plasmids with a single BmeTI recognition site, dam methylation of plasmid DNA (in vivo or in vitro) was found to enhance transformation efficiency from 7- to 11-fold. Two low-copy-number Escherichia coli-B, methanolicus shuttle plasmids, pDQ507 and pDQ508, are described. pDQ508 caries the replication origin cloned from a 17-kb endogenous B. methanolicus plasmid, pBM1. pDQ507 carries a cloned B. methanolicus DNA fragment, pmr-1, possibly of chromosomal origin, that supports maintenance of pDQ507 as a circular, extrachromosomal DNA molecule. Deletion analysis of pDQ507 indicated two regions required for replication, i.e., a 90-bp AT-rich segment containing a 46-bp imperfect, inverted repeat sequence and a second region 65% homologous to the B. subtilis dpp operon. We also evaluated two E. coli-B. subtilis vectors, pEN1 and pHP13, for use as E. coli-B. methanolicus shuttle vectors. The plasmids pHP13, pDQ507, and pDQ508 were segregationally and structurally stable in B. methanolicus for greater than 60 generations of growth under nonselective conditions; pEN1 was segregationally unstable. Single-stranded plasmid DNA was detected in B. methanolicus transformants carrying either pEN1, pHP13, or pDQ508, suggesting that pDQ508, like the B. subtilis plasmids, is replicated by a rolling-circle mechanism. These studies provide the basic tools for the genetic manipulation of B. methanolicus.     

Amplification of Epstein-Barr virus-based shuttle vectors by ultraviolet light in human cells.

In order to approach the mechanism of gene amplification, we have developed a model system in human cells based on the use of episomally-replicating shuttle vectors. Shuttle vectors carrying the replication origin of the Epstein-Barr virus can be stably maintained in human cells. These vectors replicate as an episome with a low copy number. We also constructed hybrid plasmids containing both the EBV and the SV40 replication origins. These molecules are able to replicate episomally either like an EBV vector or like SV40 if the SV40 large T antigen is provided at the same time. UV irradiation of both human adenovirus transformed 293 or SV40-transformed MRC5 host cells leads to vector amplification whatever the type of replication origin used for the episomal maintenance. Our result clearly shows that the EBV latent replication origin (OriP), in the presence of the Epstein-Barr nuclear antigen-1 (EBNA-1) and the SV40 large T antigen, is sensitive to over-replication in UV-irradiated human cells. Since the UV doses were small enough to induce very little damage, if any, on the plasmid sequences, this amplification should be mediated through a cellular factor acting in trans. The interest in using shuttle vectors for this kind of study lays in the easy analysis of the amplified vectors in rescued bacterial colonies. The accuracy of the amplification process can be monitored by studying restriction maps of individual plasmid molecules or more precisely the integrity of a target gene, such as the lacZ' sequence, carried by our vectors.     

Conservation of plasmid maintenance functions between linear and circular plasmids in Borrelia burgdorferi

The Lyme disease agent Borrelia burgdorferi maintains both linear and circular plasmids that appear to be essential for mammalian infection. Recent studies have characterized the circular plasmid regions that confer autonomous replication, but the genetic elements necessary for linear plasmid maintenance have not been experimentally identified. Two vectors derived from linear plasmids lp25 and lp28-1 were constructed and shown to replicate autonomously in B. burgdorferi. These vectors identify internal regions of linear plasmids necessary for autonomous replication in B. burgdorferi. Although derived from linear plasmids, the vectors are maintained in circular form in B. burgdorferi, indicating that plasmid maintenance functions are conserved, regardless of DNA form. Finally, derivatives of these vectors indicate that paralogous gene family 49 is apparently not required for either circular or linear plasmid replication.     

The plasmid-maintenance functions of the P7 prophage

The region responsible for the maintenance of the prophage of bacteriophage P7 as a stable, unit-copy plasmid was isolated in a lambda att vector which lysogenizes Escherichia coli as a stable unit-copy plasmid under the control of the P7 replication origin. The P7 plasmid-maintenance region was shown to consist of adjacent replication and partition regions capable of functioning independently. The isolated replication region could support plasmid maintenance but the resulting plasmids were highly unstable unless the partition region was also included. Stable composite plasmids were isolated containing the putative P7 partition region and the origin of replication of the unrelated plasmid F, indicating that P7 encoded an active partition mechanism. The replication regions of P7 and P1 were shown to be highly homologous but the partition regions of the two plasmids appear to be unrelated in sequence. The incompatibility determinants associated with the two replication regions showed the same specificity, whereas the partition-region incompatibility determinants were different, showing no cross-specificity.     

Replication regions of Sinorhizobium meliloti plasmids

The replication (rep) regions of small plasmids from three Sinorhizobium meliloti strains were cloned by marker rescue. Two unique replication regions were identified, one of which was common to two different strains. Plasmid pBB83 carried a 7.2 kbp rep region from a 42 kbp plasmid, and pBB84 carried a 4.5 kbp rep region from a 36 kbp plasmid. The cloned rep regions were of different compatibility types, and were capable of displacing their parent plasmids from S. meliloti. Neither could function in a PolA- strain of Escherichia coli. The cloned replication regions were less stable in S. meliloti than their parent plasmids. The rep genes for each plasmid were localized to less than 2.5 kbp segments. Sequencing data revealed that the pBB83 Rep protein is uncommon, with partial identity to a protein encoded by a plasmid from S. meliloti GR4 [Mercado-Blanco, J., Olivares, J., 1994. The large nonsymbiotic plasmid pRmeGR4a of Rhizobium meliloti GR4 encodes a protein involved in replication that has homology with the RepC protein of Agrobacterium plasmids. Plasmid 32, 75-79]. However, the cloned DNA fragment also contains a truncated segment of the common repABC genes, suggesting that the parent plasmid contained two sets of replication genes. Other genes and an IS-element within the insert are most closely related to sequences derived from the Rhizobiaceae family, suggesting that the plasmid has a limited host range. In contrast, the pBB84 rep region contained genes similar to those associated with several broad host-range plasmids, and its Rep protein is related to that of a Pseudomonas aeruginosa broad host-range plasmid, pVS1 [Heeb, S., Itoh, Y., Nishijyo, T., Schnider, U., Keel, C., Wade, J., Walsh, U., O'Gara, F., Haas, D., 2000. Small, stable shuttle vectors based on the minimal pVS1 replicon for use in gram-negative, plant-associated bacteria. Mol. Plant-Microbe Interact. 13, 232-237]. The pBB84 rep region also includes a probable origin of replication, consisting of DNA boxes flanking a series of direct repeats and an AT-rich sequence.     

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage φX174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5′ region has been identified and is functional in Bacillus subtilis.     

Characterization and comparative sequence analysis of replication origins from three large Bacillus thuringiensis plasmids.

The replication origins of three large Bacillus thuringiensis plasmids, derived from B. thuringiensis HD263 subsp. kurstaki, have been cloned in Escherichia coli and sequenced. The replication origins, designated ori 43, ori 44, and ori 60, were isolated from plasmids of 43, 44, and 60 MDa, respectively. Each cloned replication origin exhibits incompatibility with the resident B. thuringiensis plasmid from which it was derived. Recombinant plasmids containing the three replication origins varied in their ability to transform strains of B. thuringiensis, Bacillus megaterium, and Bacillus subtilis. Analysis of the derived nucleotide and amino acid sequences indicates that the replication origins are nonhomologous, implying independent derivations. No significant homology was found to published sequences of replication origins derived from the single-stranded DNA plasmids of gram-positive bacteria, and shuttle vectors containing the three replication origins do not appear to generate single-stranded DNA intermediates in B. thuringiensis. The replication origin regions of the large plasmids are each characterized by a single open reading frame whose product is essential for replication in B. thuringiensis. The putative replication protein of ori 60 exhibits partial homology to the RepA protein of the Bacillus stearothermophilus plasmid pTB19. The putative replication protein of ori 43 exhibits weak but extensive homology to the replication proteins of several streptococcal plasmids, including the open reading frame E replication protein of the conjugative plasmid pAM beta 1. The nucleotide sequence of ori 44 and the amino acid sequence of its putative replication protein appear to be nonhomologous to other published replication origin sequences.     

Characterization of the minimal replicon of a cryptic Deinococcus radiodurans SARK plasmid and development of versatile Escherichia coli-D. radiodurans shuttle vectors

The nucleotide sequence of a 12-kb fragment of the cryptic Deinococcus radiodurans SARK plasmid pUE10 was determined, in order to direct the development of small, versatile cloning systems for Deinococcus. Annotation of the sequence revealed 12 possible open reading frames. Among these are the repU and resU genes, the predicted products of which share similarity with replication proteins and site-specific resolvases, respectively. The products of both genes were demonstrated using an overexpression system in Escherichia coli. RepU was found to be required for replication, and ResU was found to be required for stable maintenance of pUE10 derivatives. Gel shift analysis using purified His-tagged RepU identified putative binding sites and suggested that RepU may be involved in both replication initiation and autoregulation of repU expression. In addition, a gene encoding a possible antirestriction protein was found, which was shown to be required for high transformation frequencies. The arrangement of the replication region and putative replication genes for this plasmid from D. radiodurans strain SARK is similar to that for plasmids found in Thermus but not to that for the 45.7-kb plasmid found in D. radiodurans strain R1. The minimal region required for autonomous replication in D. radiodurans was determined by sequential deletion of segments from the 12-kb fragment. The resulting minimal replicon, which consists of approximately 2.6 kb, was used for the construction of a shuttle vector for E. coli and D. radiodurans. This vector, pRAD1, is a convenient general-purpose cloning vector. In addition, pRAD1 was used to generate a promoter probe vector, and a plasmid containing lacZ and a Deinococcus promoter was shown to efficiently express LacZ.     

Structural organization of pLP1, a cryptic plasmid from Lactobacillus plantarum CCM 1904

To construct shuttle vectors based on an endogenous replicon, we isolated a small cryptic plasmid (pLP1) from Lactobacillus plantarum CCM 1904. The nucleotide sequence (2093 bp, 38.25 GC mol%) revealed one major open reading frame encoding for a 317 amino acid protein (Rep). Comparisons with proteins encoded by other Gram-positive bacteria plasmids strongly suggest that the protein encoded by pLP1 has a replicative role. The presence of a consensus sequence including a tyrosine residue known to be the replication protein binding site to the DNA (in phage phi X174) strengthens this hypothesis. The DNA sequence contains also a sequence similar to the pC194 origin nick sequence, which initiates the plasmid replication at the plus origin, characteristic of plasmids which replicate following a rolling circle mechanism via single-stranded DNA intermediates. A set of 13 direct repeats of 17 bp could be involved in the expression of the incompatibility or in the copy number control as in the other plasmids. A promoter sequence located at the rep 5' region has been identified and is functional in Bacillus subtilis.     

Elucidation of Insertion Elements Carried on Plasmids and In Vitro Construction of Shuttle Vectors from the Toxic Cyanobacterium Planktothrix

Several gene clusters that are responsible for toxin synthesis in bloom-forming cyanobacteria have been found to be associated with transposable elements (TEs). In particular, insertion sequence (IS) elements were shown to play a role in the inactivation or recombination of the genes responsible for cyanotoxin synthesis. Plasmids have been considered important vectors of IS element distribution to the host. In this study, we aimed to elucidate the IS elements propagated on the plasmids and the chromosome of the toxic cyanobacterium Planktothrix agardhii NIVA-CYA126/8 by means of high-throughput sequencing. In total, five plasmids (pPA5.5, pPA14, pPA50, pPA79, and pPA115, of 5, 6, 50, 79, and 120 kbp, respectively) were elucidated, and two plasmids (pPA5.5, pPA115) were found to propagate full IS element copies. Large stretches of shared DNA information between plasmids were constituted of TEs. Two plasmids (pPA5.5, pPA14) were used as candidates to engineer shuttle vectors (named pPA5.5SV and pPA14SV, respectively) in vitro by PCR amplification and the subsequent transposition of the Tn5 cat transposon containing the R6Kγ origin of replication of Escherichia coli. While pPA5.5SV was found to be fully segregated, pPA14SV consistently co-occurred with its wild-type plasmid even under the highest selective pressure. Interestingly, the Tn5 cat transposon became transferred by homologous recombination into another plasmid, pPA50. The availability of shuttle vectors is considered to be of relevance in investigating genome plasticity as a consequence of homologous recombination events. Combining the potential of high-throughput sequencing and in vitro production of shuttle vectors makes it simple to produce species-specific shuttle vectors for many cultivable prokaryotes.     

A plasmid cloning system utilizing replication and packaging functions of the filamentous bacteriophage fd

DNA cloning vectors were developed which utilize the replication origin (ori) of bacteriophage fd for their propagation. These vectors depend on the expression of viral gene 2 that was inserted into phage lambda, which in turn was integrated into the host genome. The constitutive expression of gene 2 in the host cells is sufficient for the propagation of at least 100 pfd plasmids per cell. In addition to the fd ori, the pfd vectors carry various antibiotic-resistance genes and unique restriction sites. Some of these vectors have no homologies to commonly used pBR plasmids or to lambda DNA. The nucleotide sequence of the vectors can be deduced from published sequences. Large DNA inserts can be stably propagated in pfd vectors; these are more stable than similar DNA fragments cloned in intact genomes of filamentous bacteriophage. Inclusion of phage sequences required for efficient phage packaging and infection with a helper phage resulted in formation of phage particles containing single-stranded plasmid genomes. Growth at 42 degrees C without selective pressure results in loss of pfd plasmids.     

Development of novel plasmid vectors and a promoter trap system in Francisella tularensis compatible with the pFLN10 based plasmids

Francisella tularensis is a category A bioterror pathogen which in some cases can cause a severe and fatal human infection. Very few virulence factors are known in this species due to the difficulty in working with it as well as the lack of tools for genetic manipulation. This work describes the construction of a shuttle vector that can replicate in Escherichia coli and F. tularensis as well as two distinct promoter trap constructs based on the shuttle vector backbone. Replication in F. tularensis is based on the promiscuous origin of replication from the Staphylococcus aureus plasmid pC194. We demonstrate the novel plasmids can coexist with established F. tularensis vectors based on the pFNL10 plasmid, the current workhorse of F. tularensis genetics. Our promoter trap can identify promoters that are activated during intracellular growth and survival. These new vectors provide additional tools for the genetic manipulation of F. tularensis.     

Characterization of putative rolling-circle plasmids from the Gram-negative bacterium Xylella fastidiosa and their use as shuttle vectors

This study was initiated to characterize a small Xylella fastidiosa (X. fastidiosa) plasmid and attempt to create a X. fastidosa/Escherichia coli shuttle vector that was stable in planta. Restriction enzyme analysis of a 1.3kb plasmid DNA from a grape-infecting strain of X. fastidiosa (UCLA) revealed the presence of three similar, but genetically distinct, plasmids, pUCLAs. Evidence that suggests the pUCLA plasmids replicate via a rolling-circle (RC) mechanism include: (i) the presence of ssDNA in X. fastidiosa cells; (ii) the presence of conserved motifs in the predicted ORF1 that are typical of initiator (Rep) proteins associated with RC replication; (iii) high amino acid identity between the putative Rep proteins of pUCLAs and Pf3, a filamentous bacteriophage of Pseudomonas aeruginosa that replicates by a RC mechanism; and (iv) the presence of a putative origin of replication upstream of ORF1 that has the potential to form secondary hairpin structures. One DNA motif present in pUCLA shared sequence similarity to known nicking sites in the origins of replication of other RC plasmids and phages. The shuttle vector, pXF001, successfully transformed grape X. fastidiosa strains and was found to be present as autonomous, structurally unchanged DNA molecules in X. fastidiosa. However, pXF001 was not stably maintained in X. fastidiosa without antibiotic selection.     

Analysis of Agrobacterium tumefaciens plasmid pTiC58 replication region with a novel high-copy-number derivative.

The origin of replication, ori, of the nopaline tumor-inducing plasmid, pTiC58, mapped in a region that shares sequence homology with octopine plasmids pTiAch5 and pTiB6. Within this region, the minimum amount of DNA necessary for maintaining autonomous replication was a 2.6-kilobase region, which also comprised the incompatibility function inc. pTiC58 derivatives containing inc were incompatible with Agrobacterium tumefaciens plasmids pTiC58, pTiD1439, pTiAch5, pTi15955, and pTiA5 and were compatible with A. rhizogenes plasmid pRi12. Situated adjacent to the origin region was a 1.5-kilobase par segment involved in stable inheritance of pTiC58 under nonselective growth conditions. When par was present, plasmid maintenance approached that of the wild-type pTiC58. Rapid loss from the cell population was observed for plasmids not containing this locus. Another 1.5-kilobase region, cop, positively regulated pTiC58 copy number, enabling certain pTiC58 derivatives to exist at a copy number up to 80 times higher than that of wild-type pTiC58. Deletions within the cop locus resulted in reduced copy number. The ori/inc regions were flanked on either side by the par and cop loci.     

High-efficiency transformation of Pichia stipitis based on its URA3 gene and a homologous autonomous replication sequence, ARS2.

This paper describes the first high-efficiency transformation system for the xylose-fermenting yeast Pichia stipitis. The system includes integrating and autonomously replicating plasmids based on the gene for orotidine-5'-phosphate decarboxylase (URA3) and an autonomous replicating sequence (ARS) element (ARS2) isolated from P. stipitis CBS 6054. Ura- auxotrophs were obtained by selecting for resistance to 5-fluoroorotic acid and were identified as ura3 mutants by transformation with P. stipitis URA3. P. stipitis URA3 was cloned by its homology to Saccharomyces cerevisiae URA3, with which it is 69% identical in the coding region. P. stipitis ARS elements were cloned functionally through plasmid rescue. These sequences confer autonomous replication when cloned into vectors bearing the P. stipitis URA3 gene. P. stipitis ARS2 has features similar to those of the consensus ARS of S. cerevisiae and other ARS elements. Circular plasmids bearing the P. stipitis URA3 gene with various amounts of flanking sequences produced 600 to 8,600 Ura+ transformants per micrograms of DNA by electroporation. Most transformants obtained with circular vectors arose without integration of vector sequences. One vector yielded 5,200 to 12,500 Ura+ transformants per micrograms of DNA after it was linearized at various restriction enzyme sites within the P. stipitis URA3 insert. Transformants arising from linearized vectors produced stable integrants, and integration events were site specific for the genomic ura3 in 20% of the transformants examined. Plasmids bearing the P. stipitis URA3 gene and ARS2 element produced more than 30,000 transformants per micrograms of plasmid DNA. Autonomously replicating plasmids were stable for at least 50 generations in selection medium and were present at an average of 10 copies per nucleus.     

Cloning ofCandida boidinii DNA fragments promoting autonomous replication of plasmids inSaccharomyces cerevisiae

Fragments of Candida boidinii chromosomal DNA were inserted into the integrative vector YIp-kanr and examined for the presence of sequences promoting autonomous replication of plasmids in Saccharomyces cerevisiae. Restriction maps of two plasmids, designated S6/4 and S6/5, originating from the same S. cerevisiae transformant, were constructed. Southern hybridization data confirmed that the plasmids carry sequences from the C. boidinii chromosome. Both plasmids transform S. cerevisiae strains at 4-5-fold higher frequency than cloning vectors based on the replication origin of the 2 microns plasmid. Mitotic stability of the constructed plasmids is similar to that of the 2 mu-based vector pNF2 in S. cerevisiae.     

Conditional gene vectors regulated in cis

Non-integrating gene vectors, which are stably and extrachromosomally maintained in transduced cells would be perfect tools to support long-term expression of therapeutic genes but preserve the genomic integrity of the cellular host. Small extrachromosomal plasmids share some of these ideal characteristics but are primarily based on virus blueprints. These plasmids are dependent on viral trans-acting factors but they can replicate their DNA molecules in synchrony with the chromosome of the cellular host and segregate to daughter cells in an autonomous fashion. On the basis of the concept of the latent origin of DNA replication of Epstein-Barr virus, oriP, we devised novel derivatives, which exclusively rely on an artificial replication factor for both nuclear retention and replication of plasmid DNA. In addition, an allosteric switch regulates the fate of the plasmid molecules, which are rapidly lost upon addition of doxycycline. Conditional maintenance of these novel plasmid vectors allows the reversible transfer of genetic information into target cells for the first time.     

Two separate regions of the extrachromosomal ribosomal deoxyribonucleic acid of Tetrahymena thermophila enable autonomous replication of plasmids in Saccharomyces cerevisiae.

Plasmids containing the nontranscribed central and terminal, but not the coding, regions of the extrachromosomal ribosomal deoxyribonucleic acid (rDNA) of Tetrahymena thermophila are capable of autonomous replication in Saccharomyces cerevisiae. These plasmids transform S. cerevisiae at high frequency; transformants are unstable in the absence of selection, and plasmids identical to those used for transformation were isolated from the transformed yeast cells. One plasmid contains a 1.85-kilobase Tetrahymena DNA fragment which includes the origin of bidirectional replication of the extrachromosomal rDNA. The other region of Tetrahymena rDNA allowing autonomous replication of plasmids in S. cerevisiae is a 650-base pair, adenine plus thymine-rich segment from the rDNA terminus. Neither of these Tetrahymena fragments shares obvious sequence homology with the origin of replication of the S. cerevisiae 2-microns circle plasmid or with ars1, an S. cerevisiae chromosomal replicator.