A kinetic study of Trichoderma reesei Cel7B catalyzed cellulose hydrolysis

One prominent feature of Trichoderma reesei (Tr) endoglucanases catalyzed cellulose hydrolysis is that the reaction slows down quickly after it starts (within minutes). But the mechanism of the slowdown is not well understood. A structural model of Tr- Cel7B catalytic domain bound to cellulose was built computationally and the potentially important binding residues were identified and tested experimentally. The 13 tested mutants show different binding properties in the adsorption to phosphoric acid swollen cellulose and filter paper. Though the partitioning parameter to filter paper is about 10 times smaller than that to phosphoric acid swollen cellulose, a positive correlation is shown for two substrates. The kinetic studies show that the reactions slow down quickly for both substrates. This slowdown is not correlated to the binding constant but anticorrelated to the enzyme initial activity. The amount of reducing sugars released after 24 h by Cel7B in phosphoric acid swollen cellulose, Avicel and filter paper cellulose hydrolysis is correlated with the enzyme activity against a soluble substrate p-nitrophenyl lactoside. Six of the 13 tested mutants, including N47A, N52D, S99A, N323D, S324A, and S346A, yield ∼15–35% more reducing sugars than the wild type (WT) Cel7B in phosphoric acid swollen cellulose and filter paper hydrolysis. This study reveals that the slowdown of the reaction is not due to the binding of the enzyme to cellulose. The activity of Tr- Cel7B against the insoluble substrate cellulose is determined by the enzyme’s capability in hydrolyzing the soluble substrate.     

Family 7 cellobiohydrolases from Phanerochaete chrysosporium: crystal structure of the catalytic module of Cel7D (CBH58) at 1.32 A resolution and homology models of the isozymes.

Cellobiohydrolase 58 (Cel7D) is the major cellulase produced by the white-rot fungus Phanerochaete chrysosporium, constituting approximately 10 % of the total secreted protein in liquid culture on cellulose. The enzyme is classified into family 7 of the glycosyl hydrolases, together with cellobiohydrolase I (Cel7A) and endoglucanase I (Cel7B) from Trichoderma reesei. Like those enzymes, it catalyses cellulose hydrolysis with net retention of the anomeric carbon configuration.The structure of the catalytic module (431 residues) of Cel7D was determined at 3.0 A resolution using the structure of Cel7A from T. reesei as a search model in molecular replacement, and ultimately refined at 1.32 A resolution. The core structure is a beta-sandwich composed of two large and mainly antiparallel beta-sheets packed onto each other. A long cellulose-binding groove is formed by loops on one face of the sandwich. The catalytic residues are conserved and the mechanism is expected to be the same as for other family members. The Phanerochaete Cel7D binding site is more open than that of the T. reesei cellobiohydrolase, as a result of deletions and other changes in the loop regions, which may explain observed differences in catalytic properties. The binding site is not, however, as open as the groove of the corresponding endoglucanase. A tyrosine residue at the entrance of the tunnel may be part of an additional subsite not present in the T. reesei cellobiohydrolase.The Cel7D structure was used to model the products of the five other family 7 genes found in P. chrysosporium. The results suggest that at least two of these will have differences in specificity and possibly catalytic mechanism, thus offering some explanation for the presence of Cel7 isozymes in this species, which are differentially expressed in response to various growth conditions.     

Structure of a full length psychrophilic cellulase from Pseudoalteromonas haloplanktis revealed by X-ray diffraction and small angle X-ray scattering

Pseudoalteromonas haloplanktis is a psychrophilic Gram-negative bacterium isolated in Antarctica, that lives on organic remains of algae. This bacterium converts the cellulose, highly constitutive of algae, into an immediate nutritive form by biodegrading this biopolymer. To understand the mechanisms of cold adaptation of its enzymatic components, we studied the structural properties of an endoglucanase, Cel5G, by complementary methods, X-ray crystallography and small angle X-ray scattering. Using X-ray crystallography, we determined the structure of the catalytic core module of this family 5 endoglucanase, at 1.4A resolution in its native form and at 1.6A in the cellobiose-bound form. The catalytic module of Cel5G presents the (beta/alpha)(8)-barrel structure typical of clan GH-A of glycoside hydrolase families. The structural comparison of the catalytic core of Cel5G with the mesophilic catalytic core of Cel5A from Erwinia chrysanthemi revealed modifications at the atomic level leading to higher flexibility and thermolability, which might account for the higher activity of Cel5G at low temperatures. Using small angle X-ray scattering we further explored the structure at the entire enzyme level. We analyzed the dimensions, shape, and conformation of Cel5G full length in solution and especially of the linker between the catalytic module and the cellulose-binding module. The results showed that the linker is unstructured, and unusually long and flexible, a peculiarity that distinguishes it from its mesophilic counterpart. Loops formed at the base by disulfide bridges presumably add constraints to stabilize the most extended conformations. These results suggest that the linker plays a major role in cold adaptation of this psychrophilic enzyme, allowing steric optimization of substrate accessibility.     

Imaging the enzymatic digestion of bacterial cellulose ribbons reveals the endo character of the cellobiohydrolase Cel6A from Humicola insolens and its mode of synergy with cellobiohydrolase Cel7A

Dispersed cellulose ribbons from bacterial cellulose were subjected to digestion with cloned Cel7A (cellobiohydrolase [CBH] I) and Cel6A (CBH II) from Humicola insolens either alone or in a mixture and in the presence of an excess of beta-glucosidase. Both Cel7A and Cel6A were effective in partially converting the ribbons into soluble sugars, Cel7A being more active than Cel6A. In combination, these enzymes showed substantial synergy culminating with a molar ratio of approximately two-thirds Cel6A and one-third Cel7A. Ultrastructural transmission electron microscopy (TEM) observations indicated that Cel7A induced a thinning of the cellulose ribbons, whereas Cel6A cut the ribbons into shorter elements, indicating an endo type of action. These observations, together with the examination of the digestion kinetics, indicate that Cel6A can be classified as an endo-processive enzyme, whereas Cel7A is essentially a processive enzyme. Thus, the synergy resulting from the mixing of Cel6A and Cel7A can be explained by the partial endo character of Cel6A. A preparation of bacterial cellulose ribbons appears to be an appropriate substrate, superior to Valonia or bacterial cellulose microcrystals, to visualize directly by TEM the endo-processivity of an enzyme such as Cel6A.     

Cloning, expression and characterization of a family 48 exocellulase, Cel48A, from Thermobifida fusca.

The gene for a 104-kDa exocellulase, Cel48A, formerly E6, was cloned from Thermobifida fusca into Escherichia coli and Streptomyces lividans. The DNA sequence revealed a type II cellulose-binding domain at the N-terminus, followed by a FNIII-like domain and ending with a glycosyl hydrolase Family 48 catalytic domain. The enzyme and catalytic domain alone were each expressed in and purified from S. lividans and had very low catalytic activity on swollen cellulose, carboxymethyl cellulose, bacterial microcrystalline cellulose and filter paper. However, in synergistic assays on filter paper, the addition of Cel48A to a balanced mixture of T. fusca endocellulase and exocellulase increased the specific activity from 7.9 to 11.7 micromol cellobiose.min-1.mL-1, more than 15-fold higher than any single enzyme alone. Cel48A retained > 50% of its maximum activity from pH 5 to 9 and from 40 to 60 degrees C. Using SWISSMODEL, the amino-acid sequence of the Cel48Acd was modeled to the known structure of Clostridium cellulolyticum CelF. Family 48 enzymes are remarkably homologous at 35% identity for all their catalytic domains and some of the properties of the 10 members are discussed.     

Dynamic interaction of Trichoderma reesei cellobiohydrolases Cel6A and Cel7A and cellulose at equilibrium and during hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.     

Dynamic Interaction of Trichoderma reesei Cellobiohydrolases Cel6A and Cel7A and Cellulose at Equilibrium and during Hydrolysis

The binding of cellobiohydrolases to cellulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding domains interact with cellulose and with each other and how binding changes during hydrolysis is still needed. In this study we used tritium labeling by reductive methylation to monitor binding of the two Trichoderma reesei cellobiohydrolases, Cel6A and Cel7A (formerly CBHII and CBHI), and their catalytic domains. Measuring hydrolysis by high-performance liquid chromatography and measuring binding by scintillation counting allowed us to correlate activity and binding as a function of the extent of degradation. These experiments showed that the density of bound protein increased with both Cel6A and Cel7A as hydrolysis proceeded, in such a way that the adsorption points moved off the initial binding isotherms. We also compared the affinities of the cellulose-binding domains and the catalytic domains to the affinities of the intact proteins and found that in each case the affinity of the enzyme was determined by the linkage between the catalytic and cellulose-binding domains. Desorption of Cel6A by dilution of the sample showed hysteresis (60 to 70% reversible); in contrast, desorption of Cel7A did not show hysteresis and was more than 90% reversible. These findings showed that the two enzymes differ with respect to the reversibility of binding.     

海栖热袍菌内切葡聚糖酶Cel12B与木聚糖酶XynA CBD结构域融合基因的构建、表达及融合酶性质分析

海栖热袍菌内切葡聚糖酶Cel12B是极耐热胞外酶,氨基酸序列分析表明不含有纤维素结合结构域(CBD),对结晶纤维素无活性,但同样菌种来源的木聚糖酶XynA有催化结构域和纤维素结合结构城。用同样极耐热酶CBD区域和Cel12B融合构建重组质粒pET-20b-Cel12B-CBD,经诱导表达后,对结晶纤维素有活性,酶学特性研究表明:最适反应温度为100℃、最适pH为5.8、在pH4.5~7.0时酶活力稳定,90℃保温2h仍有87%的酶活。     

Homologous expression and characterization of Cel61A (EG IV) of Trichoderma reesei.

There are currently four proteins in family 61 of the glycoside hydrolases, from Trichoderma reesei, Agaricus bisporus, Cryptococcus neoformans and Neurospora crassa. The enzymatic activity of these proteins has not been studied thoroughly. We report here the homologous expression and purification of T. reesei Cel61A [previously named endoglucanase (EG) IV]. The enzyme was expressed in high amounts with a histidine tag on the C-terminus and purified by metal affinity chromatography. This is the first time that a histidine tag has been used as a purification aid in the T. reesei expression system. The enzyme activity was studied on a series of carbohydrate polymers. The only activity exhibited by Cel61A was an endoglucanase activity observed on substrates containing beta-1,4 glycosidic bonds, e.g. carboxymethylcellulose (CMC), hydroxyethylcellulose (HEC) and beta-glucan. The endoglucanase activity on CMC and beta-glucan was determined by viscosity analysis, by measuring the production of reducing ends and by following the degradation of the polymer on a size exclusion chromatography system. The formation of soluble sugars by Cel61A from microcrystalline cellulose (Avicel; Merck), phosphoric acid swollen cellulose (PASC), and CMC were analysed on a HPLC system. Cel61A produced small amounts of oligosaccharides from these substrates. Furthermore, Cel61A showed activity against cellotetraose and cellopentaose. The activity of Cel61A was several orders of magnitude lower compared to Cel7B (previously EG I) of T. reesei on all substrates. One significant difference between Cel61A and Cel7B was that cellotriose was a poor substrate for Cel61A but was readily hydrolysed by Cel7B. The enzyme activity for Cel61A was further studied on a large number of carbohydrate substrates but the enzyme showed no activity towards any of these substrates.     

Kinetic studies of Thermobifida fusca Cel9A active site mutant enzymes

Thermobifida fusca Cel9A-90, an unusual family 9 enzyme, is a processive endoglucanase containing a catalytic domain closely linked to a family 3c cellulose binding domain (Cel9A-68) followed by a fibronectin III-like domain and a family 2 cellulose binding domain. To study its catalytic mechanism, 12 mutant genes with changes in five conserved residues of Cel9A-68 were constructed, cloned, and expressed in Escherichia coli. The purified mutant enzymes were assayed for their activities on (carboxymethyl)cellulose, phosphoric acid-swollen cellulose, bacterial microcrystalline cellulose, and 2,4-dinitrophenyl beta-D-cellobioside. They were also tested for ligand binding, enzyme processivity, and thermostability. The results clearly show that E424 functions as the catalytic acid, D55 and D58 are both required for catalytic base activity, and Y206 plays an important role in binding, catalysis, and processivity, while Y318 plays an important role in binding of crystalline cellulose substrates and is required for processivity. Several amino acids located in a loop at the end of the catalytic cleft (T245-L251) were deleted from Cel9A-68, and this enzyme showed slightly improved filter paper activity and binding to BMCC but otherwise behaved like the wild-type enzyme. The FnIII-like domain was deleted from Cel9A-90, reducing BMCC activity to 43% of the wild type.     

Changes in the activity of the multifunctional β-glycosyl hydrolase (Cel44C-Man26A) from Paenibacillus polymyxa by removal of the C-terminal region to minimum size

Paenibacillus polymyxa GS01 secretes Cel44C-Man26A as a multifunctional enzyme with cellulase, xylanase, lichenase, and mannanase activities. Cel44C-Man26A consists of 1,352 amino acids in which present a catalytic domain (CD) of the glycosyl hydrolase family 44 (GH44), fibronectin domain type 3 (Fn3), catalytic domain of glycosyl hydrolase family 26 (GH26), and a cellulose-binding module type 3 (CBM3). A truncated Cel44C-Man26A protein, consisting of 549 amino acid residues, reacted as a multifunctional mature enzyme despite the absence of the 10 amino acids containing GH44, Fn3, GH26, and CBM3. However, the multifunctional activity was not found in the mature Cel44C-Man26A protein truncated to less than 548 amino acids. The truncated Cel44C-Man26A proteins showed the optimum pH for the lichenase activity was pH 7.0, pH 6.0 for the xylanase and mannanase, and pH 5.0 for the cellulase. The truncated Cel44C-Man26A proteins exhibited enzymatic activity 40–120% higher than the full-length Cel44C.     

Nanoscale dynamics of cellulose digestion by the cellobiohydrolase TrCel7A

Understanding the mechanism by which cellulases from bacteria, fungi, and protozoans catalyze the digestion of lignocellulose is important for developing cost-effective strategies for bioethanol production. Cel7A from the fungus Trichoderma reesei is a model exoglucanase that degrades cellulose strands from their reducing ends by processively cleaving individual cellobiose units. Despite being one of the most studied cellulases, the binding and hydrolysis mechanisms of Cel7A are still debated. Here, we used single-molecule tracking to analyze the dynamics of 11,116 quantum dot-labeled TrCel7A molecules binding to and moving processively along immobilized cellulose. Individual enzyme molecules were localized with a spatial precision of a few nanometers and followed for hundreds of seconds. Most enzyme molecules bound to cellulose in a static state and dissociated without detectable movement, whereas a minority of molecules moved processively for an average distance of 39 nm at an average speed of 3.2 nm/s. These data were integrated into a three-state model in which TrCel7A molecules can bind from solution into either static or processive states and can reversibly switch between states before dissociating. From these results, we conclude that the rate-limiting step for cellulose degradation by Cel7A is the transition out of the static state, either by dissociation from the cellulose surface or by initiation of a processive run. Thus, accelerating the transition of Cel7A out of its static state is a potential avenue for improving cellulase efficiency.     

Chitin binding by Thermobifida fusca cellulase catalytic domains

Cellulose is a linear homopolymer of beta 1-4 linked glucose residues. Chitin is similar to cellulose in structure, and can be described as cellulose with the hydroxyl group on the C2 carbon replaced by an acetylamine group. Both cellulose and chitin form tightly packed, extensively hydrogen-bonded micro-fibrils. Up to now, binding of cellulase catalytic domains (CDs) to chitin has not been reported. In this article, binding of the CDs of Thermobifida fusca Cel6A, Cel6B, Cel48A, Cel5A, and Cel9A to alpha-chitin was investigated. The CDs of endocellulases, Cel6A and Cel5A did not bind to alpha-chitin; one exocellulase, Cel48A CD bound alpha-chitin moderately well; and the exocellulase Cel6B CD and the processive endocellulase Cel9A CD bound extremely tightly to alpha-chitin. Only mutations of Cel6B W329C, W332A and G234S and Cel9A Y206F, Y206S and D261A/R378K caused weaker binding to alpha-chitin than wild-type, and all these mutations were of residues near the catalytic center. One mutant enzyme, Cel9A D261A/R378K had weak chitinase activity, but no soluble products were detected. Chitotriose and chitotetraose were docked successfully to the catalytic cleft of Cel9A. In general, the positioning of the sugar residues in the model structures matched the cellooligosaccharides in the X-ray structure. Our results show that the binding of chitin by a cellulase can provide additional information about its binding to cellulose.     

Effects of noncatalytic residue mutations on substrate specificity and ligand binding of Thermobifida fusca endocellulase cel6A.

The availability of a high-resolution structure of the Thermobifida fusca endocellulase Cel6A catalytic domain makes this enzyme ideal for structure-based efforts to engineer cellulases with high activity on native cellulose. In order to determine the role of conserved, noncatalytic residues in cellulose hydrolysis, 14 mutations of six conserved residues in or near the Cel6A active-site cleft were studied for their effects on catalytic activity, substrate specificity, processivity and ligand-binding affinity. Eleven mutations were generated by site-directed mutagenesis using PCR, while three were from previous studies. All the CD spectra of the mutant enzymes were indistinguishable from that of Cel6A indicating that the mutations did not dramatically change protein conformation. Seven mutations in four residues (H159, R237, K259 and E263) increased activity on carboxymethyl cellulose (CM-cellulose), with K259H (in glucosyl subsite -2) creating the highest activity (370%). Interestingly, the other mutations in these residues reduced CM-cellulose activity. Only the K259H enzyme retained more activity on acid-swollen cellulose than on filter paper, suggesting that this mutation affected the rate-limiting step in crystalline cellulose hydrolysis. All the mutations lowered activity on cellotriose and cellotetraose, but two mutations, both in subsite +1 (H159S and N190A), had higher kcat/Km values (6.6-fold and 5.0-fold, respectively) than Cel6A on 2,4-dinitrophenyl-beta-D-cellobioside. Measurement of enzyme : ligand dissociation constants for three methylumbelliferyl oligosaccharides and cellotriose showed that all mutant enzymes bound these ligands either to the same extent as or more weakly than Cel6A. These results show that conserved noncatalytic residues can profoundly affect Cel6A activity and specificity.     

Surface density of cellobiohydrolase on crystalline celluloses. A critical parameter to evaluate enzymatic kinetics at a solid-liquid interface

The enzymatic kinetics of glycoside hydrolase family 7 cellobiohydrolase (Cel7A) towards highly crystalline celluloses at the solid-liquid interface was evaluated by applying the novel concept of surface density (rho) of the enzyme, which is defined as the amount of adsorbed enzyme divided by the maximum amount of adsorbed enzyme. When the adsorption levels of Trichoderma viride Cel7A on cellulose I(alpha) from Cladophora and cellulose I(beta) from Halocynthia were compared, the maximum adsorption of the enzyme on cellulose I(beta) was approximately 1.5 times higher than that on cellulose I(alpha), although the rate of cellobiose production from cellulose I(beta) was lower than that from cellulose I(alpha). This indicates that the specific activity (k) of Cel7A adsorbed on cellulose I(alpha) is higher than that of Cel7A adsorbed on cellulose I(beta). When k was plotted versus rho, a dramatic decrease of the specific activity was observed with the increase of surface density (rho-value), suggesting that overcrowding of enzyme molecules on a cellulose surface lowers their activity. An apparent difference of the specific activity was observed between crystalline polymorphs, i.e. the specific activity for cellulose I(alpha) was almost twice that for cellulose I(beta). When cellulose I(alpha) was converted to cellulose I(beta) by hydrothermal treatment, the specific activity of Cel7A decreased and became similar to that of native cellulose I(beta) at the same rho-value. These results indicate that the hydrolytic activity (rate) of bound Cel7A depends on the nature of the crystalline cellulose polymorph, and an analysis that takes surface density into account is an effective means to evaluate cellulase kinetics at a solid-liquid interface.     

Characterization of modular bifunctional processive endoglucanase Cel5 from Hahella chejuensis KCTC 2396

Cel5 from marine Hahella chejuensis is composed of glycoside hydrolase family-5 (GH5) catalytic domain (CD) and two carbohydrate binding modules (CBM6-2). The enzyme was expressed in Escherichia coli and purified to homogeneity. The optimum endoglucanase and xylanase activities of recombinant Cel5 were observed at 65 °C, pH 6.5 and 55 °C, pH 5.5, respectively. It exhibited K _m of 1.8 and 7.1 mg/ml for carboxymethyl cellulose and birchwood xylan, respectively. The addition of Ca²⁺ greatly improved thermostability and endoglucanase activity of Cel5. The Cel5 retained 90 % of its endoglucanase activity after 24 h incubation in presence of 5 M concentration of NaCl. Recombinant Cel5 showed production of cellobiose after hydrolysis of cellulosic substrates (soluble/insoluble) and methylglucuronic acid substituted xylooligosaccharides after hydrolysis of glucuronoxylans by endo-wise cleavage. These results indicated that Cel5 as bifunctional enzyme having both processive endoglucanase and xylanase activities. The multidomain structure of Cel5 is clearly distinguished from the GH5 bifunctional glycoside hydrolases characterized to date, which are single domain enzymes. Sequence analysis and homology modeling suggested presence of two conserved binding sites with different substrate specificities in CBM6-2 and a single catalytic site in CD. Residues Glu132 and Glu219 were identified as key catalytic amino acids by sequence alignment and further verified by using site directed mutagenesis. CBM6-2 plays vital role in catalytic activity and thermostability of Cel5. The bifunctional activities and multiple substrate specificities of Cel5 can be utilized for efficient hydrolysis of cellulose and hemicellulose into soluble sugars.     

Cellulase Complex of the Fungus Chrysosporium lucknowense: Isolation and Characterization of Endoglucanases and Cellobiohydrolases

Using different chromatographic techniques, eight cellulolytic enzymes were isolated from the culture broth of a mutant strain of Chrysosporium lucknowense: six endoglucanases (EG: 25 kD, pI 4.0; 28 kD, pI 5.7; 44 kD, pI 6.0; 47 kD, pI 5.7; 51 kD, pI 4.8; 60 kD, pI 3.7) and two cellobiohydrolases (CBH I, 65 kD, pI 4.5; CBH II, 42 kD, pI 4.2). Some of the isolated cellulases were classified into known families of glycoside hydrolases: Cel6A (CBH II), Cel7A (CBH I), Cel12A (EG28), Cel45A (EG25). It was shown that EG44 and EG51 are two different forms of one enzyme. EG44 seems to be a catalytic module of an intact EG51 without a cellulose-binding module. All the enzymes had pH optimum of activity in the acidic range (at pH 4.5-6.0), whereas EG25 and EG47 retained 55-60% of the maximum activity at pH 8.5. Substrate specificity of the purified cellulases against carboxymethylcellulose (CMC), beta-glucan, Avicel, xylan, xyloglucan, laminarin, and p-nitrophenyl-beta-D-cellobioside was studied. EG44 and EG51 were characterized by the highest CMCase activity (59 and 52 U/mg protein). EG28 had the lowest CMCase activity (11 U/mg) amongst the endoglucanases; however, this enzyme displayed the highest activity against beta-glucan (125 U/mg). Only EG51 and CBH I were characterized by high adsorption ability on Avicel cellulose (98-99%). Kinetics of Avicel hydrolysis by the isolated cellulases in the presence of purified beta-glucosidase from Aspergillus japonicus was studied. The hydrolytic efficiency of cellulases (estimated as glucose yield after a 7-day reaction) decreased in the following order: CBH I, EG60, CBH II, EG51, EG47, EG25, EG28, EG44.     

Engineering the exo-loop of Trichoderma reesei cellobiohydrolase, Cel7A. A comparison with Phanerochaete chrysosporium Cel7D

The exo-loop of Trichoderma reesei cellobiohydrolase Cel7A forms the roof of the active site tunnel at the catalytic centre. Mutants were designed to study the role of this loop in crystalline cellulose degradation. A hydrogen bond to substrate made by a tyrosine at the tip of the loop was removed by the Y247F mutation. The mobility of the loop was reduced by introducing a new disulphide bridge in the mutant D241C/D249C. The tip of the loop was deleted in mutant Delta(G245-Y252). No major structural disturbances were observed in the mutant enzymes, nor was the thermostability of the enzyme affected by the mutations.The Y247F mutation caused a slight k(cat) reduction on 4-nitrophenyl lactoside, but only a small effect on cellulose hydrolysis. Deletion of the tip of the loop increased both k(cat) and K(M) and gave reduced product inhibition. Increased activity was observed on amorphous cellulose, while only half the original activity remained on crystalline cellulose. Stabilisation of the exo-loop by the disulphide bridge enhanced the activity on both amorphous and crystalline cellulose. The ratio Glc(2)/(Glc(3)+Glc(1)) released from cellulose, which is indicative of processive action, was highest with Tr Cel7A wild-type enzyme and smallest with the deletion mutant on both substrates. Based on these data it seems that the exo-loop of Tr Cel7A has evolved to facilitate processive crystalline cellulose degradation, which does not require significant conformational changes of this loop.     

Enzymatic transformations of cellulose assessed by quantitative high-throughput fourier transform infrared spectroscopy (QHT-FTIR)

Enzymatic hydrolysis of bacterial microcrystalline cellulose was performed with the thermophile enzyme system of Thermobifida fusca Cel5A (a classical endocellulase), Cel6B (a classical exocellulase), Cel9A (a processive endoglucanase), and a synergistic mixture of endo- and exocellulases. Different concentrations of enzymes were used to vary the extent of hydrolysis. Following standardization, the concentration of cellulose was directly correlated to the absorbance of the cellulose signals. Crystallinity indexes (Lateral Order Index (LOI), Total Crystallinity Index, Hydrogen Bonding Index), allomorphic composition, conversion of specific atomic bonds (including the β-glucosidic bonds) were extracted from the spectral data obtained by QHT-FTIR. By quantifying the disruption of the H-bonding in complement to the sugar production, a more dynamic and complex picture of the role of cellulases in the hydrolysis of cellulose was demonstrated. The disruption of the H-bonding within the cellulose matrix appears as a quantifiable activity of the enzymes which was not correlated with the production of sugars in solution. The results also demonstrate that Cel9A activities from the cellulose transformation standpoint were partially similar to the activities of the synergistic mixture. In addition, Cel9A preferentially degraded the I(α) fraction of the crystalline cellulose while the Cel5A and Cel6B synergistic mixture preferentially degraded the I(β) fraction.     

A comparative analysis of two cDNA clones of the cellulase gene family from anaerobic fungus Piromyces rhizinflata

Cellulase family and some other glycosyl hydrolases of anaerobic fungi inhabiting the digestive tract of ruminants are believed to form an enzyme complex called cellulosome. Study of the individual component of cellulosome may shed light on understanding the organization of this complex and its functional mechanism. We have analysed the primary sequences of two cellulase clones, cel5B and cel6A, isolated from the cDNA library of ruminal fungus, Piromyces rhizinflata strain 2301. The deduced amino acid sequences of the catalytic domain of Cel5B, encoded by cel5B, showed homology with the subfamily 4 of the family 5 (subfamily 5(4)) of glycosyl hydrolases, while cel6A encoded Cel6A belonged to family 6 of glycosyl hydrolases. Phylogenetic tree analysis suggested that the genes of subfamily 5(4) glycosyl hydrolases of P. rhizinflata might have been acquired from rumen bacteria. Cel5B and Cel6A were modular enzymes consisting of a catalytic domain and dockerin domain(s), but not a cellulose binding domain. The occurrence of dockerin domains indicated that both enzymes were cellulosome components. The catalytic domain of the Cel5B (Cel5B') and Cel6A (Cel6A') recombinant proteins were purified. The optimal activity conditions with carboxymethyl cellulose (CMC) as the substrate were pH 6.0 and 50 degrees C for Cel5B', and pH 6.0 and 37-45 degrees C for Cel6A'. Both Cel5B' and Cel6A' exhibited activity against CMC, barley beta-glucan, Lichenan, and oat spelt xylan. Cel5B' could also hydrolyse p-nitrophenyl-beta-d-cellobioside, Avicel and filter paper while Cel6A' did not show any activity on these substrates. It is apparent that Cel6A' acted as an endoglucanase and Cel5B' possessed both endoglucanase and exoglucanase activities. No synergic effect was observed for these recombinant enzymes in vitro on Avicel and CMC.