Tracing cellulose microfibril orientation in inner primary cell walls

Summary By quantitative analysis of cellulose microfibril orientation at different levels in the primary cell wall of a number of cell types, the development of wall texture was studied. Meristematic, isodiametric and cylindrical parenchyma cells and cells of a suspension culture were used. Within the newly deposited microfibril population, various orientations were recognized on the micrographs. Within subpopulations the orientation of undercrossing and overcrossing microfibrils were measured. These measurements showed a gradual shift in cellulose microfibril orientation in the different levels. Microfibrils showed predominant orientations at particular levels but microfibrils of intermediate orientation also occurred, although at a much lower density. As cellulose microfibrils of intermediate orientation were not closely packed, lamellae were not formed. Interwoven microfibrils were occasionally present, indicating that differently orientated microfibrils are occasionally deposited simultaneously. Also gradual changes in orientation over the entire inner cell wall surface were observed. From these observations it was inferred that microfibril deposition occurs with a small but regular and progressive change in orientation, the rotational motion, related to that of a helicoidal system.Dedicated to Professor Dr. M. M. A. Sassen on the occasion of his 65th birthday     

Microfibril orientation in differentiating and maturing fibre and parenchyma cell walls in culms of bamboo (Phyllostachys viridi-glaucescens (Garr.) Riv. & Riv.)

Results of trials using chemical and enzymatic wall extractants for the removal of matrix materials for in situ observations of newly deposited microfibrils are described. Observations were then made of the orientation of microfibrils on the inner walls of differentiating and maturing fibres and parenchyma cells under the FESEM. Orientation changes were similar in both cell types. During very early primary wall development, deposition of microfibrils was in more or less axial alignment, which was later superseded by microfibrils in transverse orientation (90^o to the long axis). A transverse orientation of microfibrils remained throughout much of primary wall synthesis, until an abrupt shift occurred to a sloped orientation during late primary wall synthesis. Microfibrils of the first secondary wall layer were in axial alignment or steeply sloped. In subsequent secondary wall deposition there was an alternation between a transverse and a sloped or axial alignment in maturing fibres and parenchyma cells.     

A helicoidal cell wall texture in root hairs ofLimnobium stoloniferum

Summary The cell wall of root hairs ofLimnobium stoloniferum is composed of two fibrillar layers: an outer layer with a dispersed texture and an inner layer with a helicoidal texture. In stained oblique sections the helicoidal layer appears as a series of bow-shaped structures. In sections which were shadow-casted after the embedding medium was removed, the following properties of the helicoidal layer can be directly observed. (1) It is build up of superimposed lamellae. (2) Each lamella consists of parallel oriented microfibrils. (3) Going into the helicoidal layer, there is a counter-clockwise discontinuous rotation of the microfibril orientation in successive lamellae. (4) Between adjacent lamellae the average angular displacement of the microfibril orientation is about 23 degrees. The dispersed outer layer is also polylamellated, but with randomly arranged microfibrils in each lamella. Both layers are present in the lateral wall as well as in the apical wall of the root hairs. Observations indicate that in the cell wall of the tip the parallel oriented microfibrils of the outermost helicoidal lamellae become distorted towards a dispersed arrangement. The suggestion is made that the dispersed outer layer is derived from the helicoidal layer.     

Fine structure of cell wall surfaces in the giant-cellular xanthophycean alga <Emphasis Type="Italic">Vaucheria terrestris</Emphasis>

The mechanical strength of cell walls in the tip-growing cells of Vaucheria terrestris is weakened by treatment with proteolytic enzymes. To clarify the morphological characteristics of the components maintaining cell wall strength, the fine structures of the cell walls, with and without protease treatment, were observed by transmission electron microscopy (TEM) and atomic force microscopy (AFM). Observations indicated that cellulose microfibrils were arranged in random directions and overlapped each other. Most of the microfibrils observed in the inner surface of the cell wall were embedded in amorphous materials, whereas in the outer surface of the cell wall, microfibrils were partially covered by amorphous materials. The matrix components embedding and covering microfibrils were almost completely removed by protease treatment, revealing layers of naked microfibrils deposited deeply in the cell wall. Topographic data taken from AFM observations provided some additional information that could not be obtained by TEM, including more detailed images of the granular surface textures of the matrix components and the detection of microfibrils in the interior of the cell wall. In addition, quantitative AFM data of local surface heights enabled us to draw three-dimensional renderings and to quantitatively estimate the extent of the exposure of microfibrils by the enzymatic treatment.     

Microfibrillar structure of growing cell wall in a coenocytic green alga,Boergesenia forbesii

A fine structure of cell wall lamellae in a coenocytic green algaBoergesenia forbesii was examined by electron microscopy. The wall has a polylamellate structure containing cellulose microfibrils 25 to 30 nm in diameter. The outer surface of the cell was covered by a thin structureless lamella, underneath which existed a lamella containing randomly-oriented microfibrils. The major part of the wall consisted of two types of lamellae, multifibrillar lamella and a transitional, matrix-rich one. In the former, microfibrils were densely arranged more or less parallel with each other. In the transitional lamella, existing between the multifibrillar ones, the microfibril orientation shifted about 30° within the layer. The fibril orientation also shifted 30° between adjacent transitional and multifibrillar layers, and consequently the microfibril orientation in the neighboring multifibrillar layers shifted 90°. It was concluded that the orientation rotated counterclockwise when observed from inside the cell. Each lamella in the thallus wall become thinner with cell expansion, but no reorientation of microfibrils in the outer old layers was observed. In the rhizoid, the outer lamellae sloughed off with the tip growth.     

Deposition and reorientation of cellulose microfibrils in elongating cells of Petunia stylar tissue

According to Roelofsen and Houwink's (1953, Acta Bot. Neerl. 2, 218–225) multinet growth hypothesis, microfibrils originally deposited transversely in the cell wall become gradually reoriented towards more axial orientations during cell elongation. To establish the extent of reorientation, microfibrils were studied during their deposition and elongation, using stylar parenchyma and transmitting tissue cells of Petunia hybrida L. At the inner surface of very young cells, microfibrils were deposited in alternating Z- and S-helical orientations. The following sequence in deposition, from the exterior to the interior side of the wall, could be inferred: Axial: 150°–180° (Z-helical), 0°–30° (S-helical); oblique: 110°–150° (Z-helical), 30°–70° (S-helical); transverse: 90°–110° (Z-helical), 70°–90° (S-helical). With the increasing pitch, the density of the deposited microfibrils increased as well, giving rise to an alternating helical texture. During elongation, only transversely S- and Z-helically oriented microfibrils were deposited and all microfibrils underwent a certain reorientation as described in the multinet growth hypothesis. The texture resembled that of young cells and the wall maintained its thickness. The extent of passive reorientation was in agreement with the theoretical calculations made by Preston.Dedicated to Professor Dr. A.B. Wardrop, Melbourne, on the occasion of his 70th birthday     

The morphogenesis of lobed plant cells in the mesophyll and epidermis: organization and distinct roles of cortical microtubules and actin filaments

The morphogenesis of lobed plant cells has been considered to be controlled by microtubule (MT) and/or actin filament (AF) organization. In this article, a comprehensive mechanism is proposed, in which distinct roles are played by these cytoskeletal components. First, cortical MT bundles and, in the case of pavement cells, radial MT arrays combined with MT bundles determine the deposition of local cell wall thickenings, the cellulose microfibrils of which copy the orientation of underlying MTs. Cell growth is thus locally prevented and, consequently, lobes and constrictions are formed. Arch-like tangential expansion is locally imposed at the external periclinal wall of pavement cells by the radial arrangement of cellulose microfibrils at every wall thickening. Whenever further elongation of the original cell lobes occurs, AF patches assemble at the tips of growing lobes. Intercellular space formation is promoted or prevented by the opposite or alternate, respectively, arrangement of cortical MT arrays between neighboring cells. The genes that are possibly involved in the molecular regulation of the above morphogenetic procedure by MT and AF array organization are reviewed.     

Spatial organization of cellulose microfibrils and matrix polysaccharides in primary plant cell walls as imaged by multichannel atomic force microscopy

We used atomic force microscopy (AFM), complemented with electron microscopy, to characterize the nanoscale and mesoscale structure of the outer (periclinal) cell wall of onion scale epidermis – a model system for relating wall structure to cell wall mechanics. The epidermal wall contains ~100 lamellae, each ~40 nm thick, containing 3.5‐nm wide cellulose microfibrils oriented in a common direction within a lamella but varying by ~30 to 90° between adjacent lamellae. The wall thus has a crossed polylamellate, not helicoidal, wall structure. Montages of high‐resolution AFM images of the newly deposited wall surface showed that single microfibrils merge into and out of short regions of microfibril bundles, thereby forming a reticulated network. Microfibril direction within a lamella did not change gradually or abruptly across the whole face of the cell, indicating continuity of the lamella across the outer wall. A layer of pectin at the wall surface obscured the underlying cellulose microfibrils when imaged by FESEM, but not by AFM. The AFM thus preferentially detects cellulose microfibrils by probing through the soft matrix in these hydrated walls. AFM‐based nanomechanical maps revealed significant heterogeneity in cell wall stiffness and adhesiveness at the nm scale. By color coding and merging these maps, the spatial distribution of soft and rigid matrix polymers could be visualized in the context of the stiffer microfibrils. Without chemical extraction and dehydration, our results provide multiscale structural details of the primary cell wall in its near‐native state, with implications for microfibrils motions in different lamellae during uniaxial and biaxial extensions.     

Xylan deposition on secondary wall of Fagus crenata fiber

Summary. Delignified and/or xylanase-treated secondary walls of Fagus crenata fibers were examined by field emission scanning electron microscopy. Microfibrils with a smooth surface were visible in the innermost surface of the differentiating fiber secondary wall. There was no ultrastructural difference between control and delignified sections, indicating that lignin deposition had not started in the innermost surface of the cell wall. There was no ultrastructural difference between control and xylanase-treated sections. Microfibrils on the outer part of the differentiating secondary wall surface had globular substances in delignified sections. These globular substances disappeared following xylanase treatment, indicating that these globules are xylan. The globular substances were not visible near the inner part of the differentiating secondary wall but gradually increased toward the outer part of the secondary wall, indicating that xylan penetrated into the cell wall and continuously accumulated on the microfibrils. Mature-fiber secondary walls were also examined by field emission scanning electron microscopy. Microfibrils were not apparent in the secondary wall in control specimens. Microfibrils with many globular substances were observed in the delignified specimens. Following xylanase treatment, the microfibrils had a smooth surface without any globules, indicating that the globular substance is xylan. These results suggest that cellulose microfibrils synthesized on the plasma membrane are released into the innermost surface of the secondary wall and coated with a thin layer of xylan. Successive deposition of xylan onto the cell wall increases the microfibril diameter. The large amounts of xylan that accumulated on microfibrils appear globular but are covered with lignin after they are deposited. Received February 20, 2001/Accepted September 1, 2001     

Surface architecture of the plant cell: Biogenesis of the cell wall,with special emphasis on the role of the plasma membrane in cellulose biosynthesis

Cell wall structure and biogenesis in the unicellular green alga, Oocystis apiculata, is described. The wall consists of an outer amourphous primary layer and an inner secondary layer of highly organized cellulosic microfibrils. The primary wall is deposited immediately after cytokinesis. Golgi-derived products contribute to this layer. Cortical microtubules underlie the plasma membrane immediately before and during primary wall formation. They function in maintaining the elliptical cell shape. Following primary wall synthesis, Golgi-derived materials accumulate on the cell surface to form the periplasmic layer. This layer functions in the deposition of coating and cross-linking substances which associate with cellulosic microfibrils of the incipient secondary wall. Secondary wall microfibrils are assembled in association with the plasma membrane. Freeze-etch preparations of untreated, living cells reveal linear terminal complexes in association with growing cellulosic microfibrils. These complexes are embedded in the EF fracture face of the plasma membrane. The newly synthesized microfibril lies in a groove of the outer leaflet of the plasma membrane. The groove is decorated on the EF fracture face by perpendicular structures termed “ridges.” The ridges interlink with definitive rows of particles associated with the PF fracture face of the inner leaflet of the plasma membrane. These particles are termed “granule bands,” and they function in the orientation of the newly synthesized microfibrils. Microfibril development in relation to a coordinated multienzyme complex is discussed. The process of cell wall biogenesis in Oocystis is compared to that in higher plants.     

Stem Elongation and Cell Wall Proteins in Flowering Plants

Abstract: The growth of stems (hypocotyls, epicotyls) and stem-like organs (coleoptiles) in developing seedlings is largely due to the elongation of cells in the sub-apical region of the corresponding organ. According to the organismal concept of plant development, the thick outer epidermal wall, which can be traced back to the peripheral cell wall of the zygote, creates a sturdy organ sheath that determines the rate of stem elongation. The cells of the inner tissues are the products of secondary partitioning of one large protoplast; these turgid, thin-walled cells provide the driving force for organ growth. The structural differences between these types of cell walls are described (outer walls: thick, sturdy, helicoidal cellulose architecture; inner walls: thin, extensible, transversely-oriented cellulose microfibrils). On the basis of these facts, current models of cell wall loosening (and wall stiffening) are discussed with special reference to the expansin, enzymatic polymer remodelling and osmiophilic particle hypothesis. It is concluded that the exact biochemical mechanism(s) responsible for the coordinated yielding of the growth-controlling peripheral organ wall(s) have not yet been identified.     

Interrelation between Lignin Deposition and Polysaccharide Matrices during the Assembly of Plant Cell Walls

Abstract: The modifications caused by genetic down-regulation of the enzyme cinnamoyl CoA reductase (CCR) from monolignol biosynthetic pathways on tobacco and Arabidopsis thaliana were investigated at the ultrastructural level. A typical result was that the same transformation led to similar abnormality in secondary wall formation of fibres in both plants. The cell wall alterations mainly consisted in an important disorganization and loosening of cellulose microfibrils in the inner part of the S₂ layer. This inability of the transformants to form a coherent cell wall coincided with a lack of synthesis of non-condensed forms of lignin in this disorganized region of the wall, as demonstrated by immunolabelling of lignin subunits. A similar disorganization was observed during fibre wall formation in the differentiating tissues of young Populus and A. thaliana plants. The transitory lack of organization of cellulose microfibrils, also coincided with a depletion in non-condensed forms of lignins. These results suggest that such lignin substructures may be involved in the cohesion of secondary walls during cell wall biogenesis. The mutual influence of the cellulose-hemicellulose environment and monolignol local polymerization is discussed.     

Short-term effects of nitrogen availability on wood formation and fibre properties in hybrid poplar

The application of nitrogen-containing fertilisers is one approach used to increase growth rates and productivity of forest tree plantations. However, the effects of nitrogen fertilisation on wood properties have not been systematically assessed. The aim of this work was to document the impacts of nitrogen fertilisation on wood formation and secondary xylem fibre properties. We used three fertilisation treatments in which the level of ammonium nitrate was adjusted to 0, 1 and 10 mM in a complete nutrient solution applied daily over a period of 28 days in standardised greenhouse experiments with clonal material of Populus trichocarpa (Torr and Gray) × deltoides (Bartr. ex Marsh). We showed that there was a short-term and repeatable response in which xylem fibre morphology and secondary cell wall structure adapt to a shift in N availability. Under high-nitrogen exposure, xylem fibres were 17% wider and 18% shorter compared to the adequate nitrogen treatment. A very significant thickening of the fibre cell walls was also observed throughout the stem of trees receiving the high-N treatment. It appeared that cell wall structure was greatly affected by the high-N treatment as fibres developed a modified inner cell wall layer. Histological observations indicated that the internal cell wall layer was enriched in cellulose and chemical determinations showed that wood contained more holocellulose. Together, these results indicate that the response of poplar to nitrogen availability may involve marked effects on secondary xylem formation.     

Microtubules and angiosperm bordered pit formation

Summary Microtubules have been shown to run around the perimeter of the pit aperture of developing bordered pits of Salix fragilis, L. These microtubules are parallel to the microfibrils being produced and do not converge with them. Although microtubules may be parallel to microfibrils in differentiating vessel elements as well as in fibres, many cases have been found where microtubules are not so orientated. There is no direct evidence for the involvement of microtubules in the orientation of microfibrils in the secondary wall, although their position during wall synthesis suggests some ancillary role.     

Arrangement of cortical microtubules during formation of bordered pit in the tracheids ofTaxus

Summary The arrangement of cortical microtubules during the development of the secondary wall and bordered pits in the tracheids ofTaxus was examined by immunofluorescence and electron microscopy. The cambial region of radial longitudinal sections of developing young shoots (2–3 years old) contains cells at various stages of differentiation from cambial cells to tracheids. At the early stage of formation of bordered pits, circular bands of microtubules were seen to be associated with the inner edge of the border of the developing pit. In other regions than the pit secondary wall of uniform thickness was laid down, and obliquely oriented cortical microtubules ran parallel to one another. These cortical microtubules also covered the surface of the border of the developing pit on the side facing the center of the cell. As the border of the pit developed, a circular band of MTs remained associated with the inner edge of border, suggesting that the MTs were involved in the formation of the rim of the bordered pit, extending the initial border thickening, which consisted of concentrically oriented cellulose microfibrils. After completion of the formation of the bordered pit, helical thickenings became apparent. The obliquely oriented microtubules were organized in bands parallel to one another, being superimposed on the helical thickenings. The involvement of MTs in the formation of bordered pits and helical thickening is discussed.     

Tracheid differentiation in tobacco pith cultures

Summary Sterile pith cultures of Nicotiana tabacum have been induced to form localized regions of differentiating tracheids. These localized regions have been examined by phase, fluorescence, and electron microscopy, and polarization optics. Fixation for electron microscopy was with glutaraldehyde-osmium. The differentiating tracheids develop characteristic thick cell walls which are eventually lignified. The lignifications appear to be uniform throughout the secondary wall and little or no lignin appears to be deposited in the primary walls or intercellular layer. At all stages of secondary wall deposition, the peripheral cytoplasm contains a system of microtubules which form a pattern similar to that of the developing thickenings. Within this system the microtubules are oriented, the direction of orientation mirroring that of the fibrils in the most recently deposited parts of the wall. The observations support the view that the microtubules are somehow involved in microfibril orientation. The microtubules appear to be attached to the plasma membrane which has a triple layered structure. The two electron dense layers of the plasma membrane have a particulate structure. In the differentiating tracheids at regions where secondary wall thickening has not yet been deposited numerous invaginations of the plasma membrane are observed which contain loosely organized fibrillar material. It is suggested that these are areas of localized activity of the plasma membrane and that the enzymes concerned with the final organization of the cellulose microfibrils are situated at the surface of the plasma membrane. Dictyosomes in the differentiation cells give rise to vesicles which contain fibrous material and the contents are incorporated into the cell wall. Numerous profiles characteristic of plasmodesmata are evident in sections of the secondary thickenings.Part of this work was carried out at the Osborne Memorial Laboratories, Yale University.     

Cellulose synthesis in two secondary cell wall processes in a single cell type

Plant cells have a rigid cell wall that constrains internal turgor pressure yet extends in a regulated and organized manner to allow the cell to acquire shape. The primary load-bearing macromolecule of a plant cell wall is cellulose, which forms crystalline microfibrils that are organized with respect to a cell''s function and shape requirements. A primary cell wall is deposited during expansion whereas secondary cell wall is synthesized post expansion during differentiation. A complex form of asymmetrical cellular differentiation occurs in Arabidopsis seed coat epidermal cells, where we have recently shown that two secondary cell wall processes occur that utilize different cellulose synthase (CESA) proteins. One process is to produce pectinaceous mucilage that expands upon hydration and the other is a radial wall thickening that reinforced the epidermal cell structure. Our data illustrate polarized specialization of CESA5 in facilitating mucilage attachment to the parent seed and CESA2, CESA5 and CESA9 in radial cell wall thickening and formation of the columella. Herein, we present a model for the complexity of cellulose biosynthesis in this highly differentiated cell type with further evidence supporting each cellulosic secondary cell wall process.     

Fine structure of the cell walls of Polyporus myllitae Cke. et Mass.

Following a brief survey of the wall structure of the vegetative hyphae of a number of basidiomyeetes, attention is focused upon Polyporus myllitae Cke. et Mass. After removal of the outer amorphous layer by various chemical treatments, the underlying surface is seen to consist of an interwoven network of microfibrils. There is no evidence of any preferred angle of orientation. However, on what is believed to be the inner surface of the hyphal wall, microfibrils show a strong tendency towards a transverse orientation. The resulting structure is compatible with the multi-net concept of cell wall growth of Houwink and Koelofsen. There is no obvious change in microfibril orientation in passing along a hypha towards its tip. Electron-opaque cross-walls partition hyphae, sometimes separate a branch from a parent hypha, and occur in clamp connections. The cross-wall consists of microfibrils underlying, or embedded in, an amorphous matrix. They are circularly arranged around a single central pore which has a thickened rim.     

Arrangement of Cellulose Microfibrils in Walls of Elongating Parenchyma Cells

The arrangement of cellulose microfibrils in walls of elongating parenchyma cells of Avena coleoptiles, onion roots, and celery petioles was studied in polarizing and electron microscopes by examining whole cell walls and sections. Walls of these cells consist firstly of regions containing the primary pit fields and composed of microfibrils oriented predominantly transversely. The transverse microfibrils show a progressive disorientation from the inside to the outside of the wall which is consistent with the multinet model of wall growth. Between the pit-field regions and running the length of the cells are ribs composed of longitudinally oriented microfibrils. Two types of rib have been found at all stages of cell elongation. In some regions, the wall appears to consist entirely of longitudinal microfibrils so that the rib forms an integral part of the wall. At the edges of such ribs the microfibrils can be seen to change direction from longitudinal in the rib to transverse in the pit-field region. Often, however, the rib appears to consist of an extra separate layer of longitudinal microfibrils outside a continuous wall of transverse microfibrils. These ribs are quite distinct from secondary wall, which consists of longitudinal microfibrils deposited within the primary wall after elongation has ceased. It is evident that the arrangement of cellulose microfibrils in a primary wall can be complex and is probably an expression of specific cellular differentiation.