Adhesion of enteropathogenic Escherichia coli to host cells

Enteropathogenic Escherichia coli (EPEC) adhere to the intestinal mucosa and to tissue culture cells in a distinctive fashion, destroying microvilli, altering the cytoskeleton and attaching intimately to the host cell membrane in a manner termed the attaching and effacing effect. Typical EPEC strains also form three-dimensional microcolonies in a pattern termed localized adherence. Attaching and effacing, and in particular intimate attachment requires an outer membrane adhesin called intimin, which binds to the translocated intimin receptor, Tir. Tir is produced by the bacteria and delivered to the host cell via a type III secretion system. In addition to this well-established adhesin-receptor pair, numerous other adhesin interactions between EPEC and host cells have been described including those between intimin and cellular receptors and those involving a bundle-forming pilus and flagella and unknown receptors. Much additional work is needed before a full understanding of EPEC adhesion to host cells comes to light.     

Oriented adhesion of Escherichia coli to polystyrene particles

The adhesion of nonflagellated Escherichia coli strain K-12 to polystyrene (PS) latex spheres or glass capillaries has been observed by using several techniques. Attention was focused on the orientation of the rod-shaped bacteria as they adhered to the surfaces in 100 mM phosphate-buffered saline. Data show that PS particles adhered to the ends of the bacteria more than 90% of the time. Moreover, the PS particles adhered to one end only, never to both. Similarly, for experiments with bacteria adhering to glass, the bacteria adhered on their ends. In order to determine whether the end of a bacterium had a different charge density from that of the middle, rotational electrophoresis experiments were used. These experiments indicated no measurable charge nonuniformity. In order to examine how strongly adhered the bacteria were to the PS particles, differential electrophoresis was used. Almost always, bacteria were found to be irreversibly adhered to the PS spheres. The cause of the oriented adhesion is not likely due to surface lipopolysaccharides (LPS), since the three strains of K-12 that were used, each having a different length of LPS, showed similar behavior. The results are discussed in terms of bacterial cell polarity. The data indicate that nanodomains on the bacterial ends are important for adhesion and that the time scale for irreversible adhesion is short.     

Adhesion of Escherichia coli to human kidney cryostat sections

Abstract A method for studying adhesion of fluorochrome-stained Escherichia coli to cryostat sections of human kidney is described. Of the 3 model strains used, the P-fimbriated strain KS71 adhered more effectively than the type-1-fimbriated or nonfimbriated strains. Adhesion of KS71 was inhibited specifically by anti-P-fimbriae Fab fragments, and it was concluded that P-fimbriae mediate E. coli adhesion in the kidneys.     

Adhesion and entry of uropathogenic Escherichia coli

To effectively colonize a host animal and cause disease, many bacterial pathogens have evolved the mechanisms needed to invade and persist within host cells and tissues. Recently it was discovered that uropathogenic Escherichia coli, the primary causative agent of urinary tract infections, can invade and replicate within uroepithelial cells. This can provide E. coli with a survival advantage, allowing the microbes to better resist detection and clearance by both innate and adaptive immune defence mechanisms. Adhesive organelles, including type 1, P, and S pili along with Dr adhesins, promote both bacterial attachment to and invasion of host tissues within the urinary tract. Interactions mediated by these adhesins can also stimulate a number of host responses that can directly influence the outcome of a urinary tract infection.     

Presence of Bacteriophage-Like Inhibitory Particles in Escherichia coli

Bacteriophage-like particles were found in the supernatant fluids of Escherichia coli O111a and O111:B(4). Caution is urged in the study of deoxyribonucleic acid synthesis and replication in these strains.     

Oriented fragmentation of Escherichia coli sacculi by sonication.

Isolated murein sacculi of Escherichia coli PA3092 were physically ruptured by sonication. Electron microscopical analysis showed that the rupturing occurred preferentially prependicular to the long axis of the cell. The fragmentation of the sacculi increased with longer sonication times. It was found that the extent of cross-linkage was more affected by the sonication than was the average glycan chain length. These data confirm earlier observations and indicate that the glycan chains run predominantly perpendicular to the long axis of the cell. By contrast, the peptide cross-links are more dispersely oriented.     

Interaction of Escherichia coli and Soil Particles in Runoff

A laboratory-scale model system was developed to investigate the transport mechanisms involved in the horizontal movement of bacteria in overland flow across saturated soils. A suspension of Escherichia coli and bromide tracer was added to the model system, and the bromide concentration and number of attached and unattached E. coli cells in the overland flow were measured over time. Analysis of the breakthrough curves indicated that the E. coli and bromide were transported together, presumably by the same mechanism. This implied that the E. coli was transported by advection with the flowing water. Overland-flow transport of E. coli could be significantly reduced if the cells were preattached to large soil particles (>45 μm). However, when unattached cells were inoculated into the system, the E. coli appeared to attach predominantly to small particles (<2 μm) and hence remained unattenuated during transport. These results imply that in runoff generated by saturation-excess conditions, bacteria are rapidly transported across the surface and have little opportunity to interact with the soil matrix.     

Role of Capsular Colanic Acid in Adhesion of Uropathogenic Escherichia coli

Urinary tract infections are the most common urologic disease in the United States and one of the most common bacterial infections of any organ system. Biofilms persist in the urinary tract and on catheter surfaces because biofilm microorganisms are resistant to host defense mechanisms and antibiotic therapy. The first step in the establishment of biofilm infections is bacterial adhesion; preventing bacterial adhesion represents a promising method of controlling biofilms. Evidence suggests that capsular polysaccharides play a role in adhesion and pathogenicity. This study focuses on the role of physiochemical and specific binding interactions during adhesion of colanic acid exopolysaccharide mutant strains. Bacterial adhesion was evaluated for isogenic uropathogenic Escherichia coli strains that differed in colanic acid expression. The atomic force microscope (AFM) was used to directly measure the reversible physiochemical and specific binding interactions between bacterial strains and various substrates as bacteria initially approach the interface. AFM results indicate that electrostatic interactions were not solely responsible for the repulsive forces between the colanic acid mutant strains and hydrophilic substrates. Moreover, hydrophobic interactions were not found to play a significant role in adhesion of the colanic acid mutant strains. Adhesion was also evaluated by parallel-plate flow cell studies in comparison to AFM force measurements to demonstrate that prolonged incubation times alter bacterial adhesion. Results from this study demonstrate that the capsular polysaccharide colanic acid does not enhance bacterial adhesion but rather blocks the establishment of specific binding as well as time-dependent interactions between uropathogenic E. coli and inert substrates.     

Adhesion of Colletotrichum lindemuthianum Spores to Phaseolus vulgaris Hypocotyls and to Polystyrene

Adhesion of Colletotrichum lindemuthianum spores to Phaseolus vulgaris hypocotyls and to polystyrene was inhibited by the respiratory inhibitors sodium azide and antimycin A, indicating a requirement for metabolic activity in adhesion. Various commercial proteins and Tween 80 also reduced adhesion to both surfaces. Binding was enhanced by the presence of salts: sodium, potassium, calcium, and magnesium chlorides were equally effective. The removal of surface wax from hypocotyls by chloroform treatment greatly reduced their subsequent ability to bind spores. The results suggest a similar mechanism for spore adhesion to the plant surface and to polystyrene, involving purely physical surface properties rather than group-specific binding sites.     

Effect of Cetylpyridinium Chloride on Microbial Adhesion to Hexadecane and Polystyrene

Microbial adhesion at the oil-water interface is a subject of both basic interest (e.g., as a technique for the measurement of hydrophobicity) and applied interest (e.g., for use in two-phase oil-water mouthwashes for the desorption of oral microorganisms). In general, surfactants inhibit microbial adhesion to oils and other hydrophobic surfaces. In the present study, we demonstrated that the cationic surfactant cetylpyridinium chloride (CPC) significantly enhanced microbial adhesion to hexadecane and various oils, as well as to the solid hydrophobic surface polystyrene. CPC increased adhesion to hexadecane of Escherichia coli, Candida albicans and Acinetobacter calcoaceticus MR-481 and of expectorated oral bacteria from near 0% to over 90%. The CPC concentration required for optimal enhancement of adhesion was a function of the initial cell density. This phenomenon was inhibited by high salt concentrations and, in the case of E. coli, by a low pH. CPC-pretreated cells were able to bind to hexadecane, but CPC-pretreated hexadecane was unable to bind untreated cells. Another cationic, surface-active antimicrobial agent, chlorhexidine gluconate, was similarly able to promote microbial adhesion to hexadecane. The results suggest that (i) CPC enhances microbial adhesion to hexadecane by binding via electrostatic interactions at the cell surface, thus diminishing surface charge and increasing cell surface hydrophobicity, and (ii) this phenomenon may have applications in oral formulations and in the use of hydrocarbon droplets as a support for cell immobilization.     

Conjugative Plasmid Transfer and Adhesion Dynamics in an Escherichia coli Biofilm

A conjugative plasmid from the catheter-associated urinary tract infection strain Escherichia coli MS2027 was sequenced and annotated. This 42,644-bp plasmid, designated pMAS2027, contains 58 putative genes and is most closely related to plasmids belonging to incompatibility group X (IncX1). Plasmid pMAS2027 encodes two important virulence factors: type 3 fimbriae and a type IV secretion (T4S) system. Type 3 fimbriae, recently found to be functionally expressed in E. coli, played an important role in biofilm formation. Biofilm formation by E. coli MS2027 was specifically due to expression of type 3 fimbriae and not the T4S system. The T4S system, however, accounted for the conjugative ability of pMAS2027 and enabled a non-biofilm-forming strain to grow as part of a mixed biofilm following acquisition of this plasmid. Thus, the importance of conjugation as a mechanism to spread biofilm determinants was demonstrated. Conjugation may represent an important mechanism by which type 3 fimbria genes are transferred among the Enterobacteriaceae that cause device-related infections in nosocomial settings.Bacterial biofilms are complex communities of bacterial cells living in close association with a surface (17). Bacterial cells in these protected environments are often resistant to multiple factors, including antimicrobials, changes in the pH, oxygen radicals, and host immune defenses (19, 38). Biofilm formation is a property of many bacterial species, and a range of molecular mechanisms that facilitate this process have been described (2, 3, 11, 14, 16, 29, 33, 34). Often, the ability to form a biofilm is dependent on the production of adhesins on the bacterial cell surface. In Escherichia coli, biofilm formation is enhanced by the production of certain types of fimbriae (e.g., type 1 fimbriae, type 3 fimbriae, F1C, F9, curli, and conjugative pili) (14, 23, 25, 29, 33, 39, 46), cell surface adhesins (e.g., autotransporter proteins such as antigen 43, AidA, TibA, EhaA, and UpaG) (21, 34, 35, 40, 43), and flagella (22, 45).The close proximity of bacterial cells in biofilms creates an environment conducive for the exchange of genetic material. Indeed, plasmid-mediated conjugation in monospecific and mixed E. coli biofilms has been demonstrated (6, 18, 24, 31). The F plasmid represents the best-characterized conjugative system for biofilm formation by E. coli. The F pilus mediates adhesion to abiotic surfaces and stabilizes the biofilm structure through cell-cell interactions (16, 30). Many other conjugative plasmids also contribute directly to biofilm formation upon derepression of the conjugative function (16).One example of a conjugative system employed by gram-negative Enterobacteriaceae is the type 4 secretion (T4S) system. The T4S system is a multisubunit structure that spans the cell envelope and contains a secretion channel often linked to a pilus or other surface filament or protein (8). The Agrobacterium tumefaciens VirB-VirD4 system is the archetypical T4S system and is encoded by 11 genes in the virB operon and one gene (virD4) in the virD operon (7, 8). Genes with strong homology to genes in the virB operon have also been identified on other conjugative plasmids. For example, the pilX1 to pilX11 genes on the E. coli R6K IncX plasmid and the virB1 to virB11 genes are highly conserved at the nucleotide level (28).We recently described identification and characterization of the mrk genes encoding type 3 fimbriae in a uropathogenic strain of E. coli isolated from a patient with a nosocomial catheter-associated urinary tract infection (CAUTI) (29). The mrk genes were located on a conjugative plasmid (pMAS2027) and were strongly associated with biofilm formation. In this study we determined the entire sequence of plasmid pMAS2027 and revealed the presence of conjugative transfer genes homologous to the pilX1 to pilX11 genes of E. coli R6K (in addition to the mrk genes). We show here that biofilm formation is driven primarily by type 3 fimbriae and that the T4S apparatus is unable to mediate biofilm growth in the absence of the mrk genes. Finally, we demonstrate that conjugative transfer of pMAS2027 within a mixed biofilm confers biofilm formation properties on recipient cells due to acquisition of the type 3 fimbria-encoding mrk genes.     

Adhesion of Bacillus spores and Escherichia coli cells to inert surfaces: role of surface hydrophobicity

The ability of bacterial spores and vegetative cells to adhere to inert surfaces was investigated by means of the number of adherent spores (Bacillus cereus and Bacillus subtilis spores) and Escherichia coli cells and their resistance to cleaning or rinsing procedures (adhesion strength). Six materials (glass, stainless steel, polyethylene high density (PEHD), polyamide-6, polyvinyl chloride, and Teflon) were tested. Slight differences in the number of adherent spores (less than 1 log unit) were observed between materials, but a higher number of adherent E. coli cells was found on the hydrophobic materials PEHD and Teflon. Conversely, the resistance of both B. cereus and B. subtilis spores to a cleaning procedure was significantly affected by the material. Hydrophobic materials were harder to clean. The topography parameter derived from the Abbott-Firestone curve, RVK, and, to a lesser extent, the widely used roughness parameters RA (average roughness) and Rz (maximal roughness), were related to the number of adherent cells. Lastly, the soiling level as well as the adhesion strength were shown to depend largely on the microorganism. The number of adhering B. cereus hydrophobic spores and their resistance to a cleaning procedure were found to be 10 times greater than those of the B. subtilis hydrophilic spores. Escherichia coli was loosely bound to all the materials tested, even after 24 h biofilm formation.     

Adhesion of type 1-fimbriated Escherichia coli to abiotic surfaces leads to altered composition of outer membrane proteins

Phenotypic differences between planktonic bacteria and those attached to abiotic surfaces exist, but the mechanisms involved in the adhesion response of bacteria are not well understood. By the use of two-dimensional (2D) polyacrylamide gel electrophoresis, we have demonstrated that attachment of Escherichia coli to abiotic surfaces leads to alteration in the composition of outer membrane proteins. A major decrease in the abundance of resolved proteins was observed during adhesion of type 1-fimbriated E. coli strains, which was at least partly caused by proteolysis. Moreover, a study of fimbriated and nonfimbriated mutants revealed that these changes were due mainly to type 1 fimbria-mediated surface contact and that only a few changes occurred in the outer membranes of nonfimbriated mutant strains. Protein synthesis and proteolytic degradation were involved to different extents in adhesion of fimbriated and nonfimbriated cells. While protein synthesis appeared to affect adhesion of only the nonfimbriated strain, proteolytic activity mostly seemed to contribute to adhesion of the fimbriated strain. Using matrix-assisted laser desorption ionization-time of flight mass spectrometry, six of the proteins resolved by 2D analysis were identified as BtuB, EF-Tu, OmpA, OmpX, Slp, and TolC. While the first two proteins were unaffected by adhesion, the levels of the last four were moderately to strongly reduced. Based on the present results, it may be suggested that physical interactions between type 1 fimbriae and the surface are part of a surface-sensing mechanism in which protein turnover may contribute to the observed change in composition of outer membrane proteins. This change alters the surface characteristics of the cell envelope and may thus influence adhesion.     

Influence of Growth Phase on Adhesion Kinetics of Escherichia coli D21g

The influence of bacterial growth stage and the evolution of surface macromolecules on cell adhesion have been examined by using a mutant of Escherichia coli K-12. To better understand the adhesion kinetics of bacteria in the mid-exponential and stationary growth phases under flow conditions, deposition experiments were conducted in a well-controlled radial stagnation point flow (RSPF) system. Complementary cell characterization techniques were conducted in combination with the RSPF experiments to evaluate the hydrophobicity, electrophoretic mobility, size, and titratable surface charge of the cells in the two growth phases considered. It was observed that cells in stationary phase were notably more adhesive than those in mid-exponential phase. This behavior is attributed to the high degree of local charge heterogeneity on the outer membranes of stationary-phase cells, which results in decreased electrostatic repulsion between the cells and a quartz surface. The mid-exponential-phase cells, on the other hand, have a more uniform charge distribution on the outer membrane, resulting in greater electrostatic repulsion and, subsequently, less adhesion. Our results suggest that the macromolecules responsible for this phenomenon are outer membrane-bound proteins and lipopolysaccharide-associated functional groups.     

Crohn's Disease-Associated Adherent-Invasive Escherichia coli Adhesion Is Enhanced by Exposure to the Ubiquitous Dietary Polysaccharide Maltodextrin

Crohn''s disease (CD) is associated with intestinal dysbiosis evidenced by an altered microbiome forming thick biofilms on the epithelium. Additionally, adherent-invasive E. coli (AIEC) strains are frequently isolated from ileal lesions of CD patients indicating a potential role for these strains in disease pathogenesis. The composition and characteristics of the host microbiome are influenced by environmental factors, particularly diet. Polysaccharides added to food as emulsifiers, stabilizers or bulking agents have been linked to bacteria-associated intestinal disorders. The escalating consumption of polysaccharides in Western diets parallels an increased incidence of CD during the latter 20^th century. In this study, the effect of a polysaccharide panel on adhesiveness of the CD-associated AIEC strain LF82 was analyzed to determine if these food additives promote disease-associated bacterial phenotypes. Maltodextrin (MDX), a polysaccharide derived from starch hydrolysis, markedly enhanced LF82 specific biofilm formation. Biofilm formation of multiple other E. coli strains was also promoted by MDX. MDX-induced E. coli biofilm formation was independent of polysaccharide chain length indicating a requirement for MDX metabolism. MDX exposure induced type I pili expression, which was required for MDX-enhanced biofilm formation. MDX also increased bacterial adhesion to human intestinal epithelial cell monolayers in a mechanism dependent on type 1 pili and independent of the cellular receptor CEACAM6, suggesting a novel mechanism of epithelial cell adhesion. Analysis of mucosa-associated bacteria from individuals with and without CD showed increased prevalence of malX, a gene essential for MDX metabolism, uniquely in the ileum of CD patients. These findings demonstrate that the ubiquitous dietary component MDX enhances E. coli adhesion and suggests a mechanism by which Western diets rich in specific polysaccharides may promote dysbiosis of gut microbes and contribute to disease susceptibility.     

The Listeria monocytogenes Homolog of the Escherichia coli era Gene Is Involved in Adhesion to Inert Surfaces

Two transposon-insertional mutants of Listeria monocytogenes showing smaller viable surface-attached cell populations after disinfection with N,N-didecyl-N,N-dimethylammonium chloride were identified. In both mutants, transposon Tn917-lac was found to be inserted into the same gene, lmo1462, which is homologous to the essential Escherichia coli era gene. Both L. monocytogenes lmo1462-disrupted mutants displayed lower growth rates, as was also shown for several E. coli era mutants, and the lmo1462 gene was able to complement the growth defect of an E. coli era mutant. We showed that the disruption of lmo1462 decreased the ability of L. monocytogenes cells to adhere to stainless steel. Our results suggest that this era-like gene is involved in adhesion and contributes to the presence of L. monocytogenes on surfaces.     

Variability of the Influence of Physicochemical Factors Affecting Bacterial Adhesion to Polystyrene Substrata

The role of electrostatic and hydrophobic interactions and solid and liquid surface tensions in the adhesion of four bacterial species (Pseudomonas fluorescens, Enterobacter cloacae, Chromobacterium sp., and Flexibacter sp.) to hydrophobic polystyrene petri dishes and to more hydrophilic polystyrene tissue culture dishes was investigated. The effect of electrostatic interactions was investigated by determining the effects of different electrolyte solutions on attachment to and of different electrolyte and pH solutions on detachment from the polystyrene substrate. The significance of solid and liquid surface tensions and hydrophobic interactions was investigated by measuring the effects of different surfactants (including a concentration series of dimethyl sulfoxide) on adhesion and detachment. Adhesion varied with bacterial species, substratum, and electrolyte type and concentration, with no apparent correlation between adhesion and electrolyte valence or concentration. The influence of different pH and detergent solutions on bacterial detachment also varied with species, substratum, pH, and detergent type; however, the greatest degree of detachment of all strains from the surfaces was produced by detergent treatment. The results suggest that adhesion cannot be attributed to any one type of adhesive interaction. There was some evidence for both electrostatic and hydrophobic interactions, but neither interaction could wholly account for the data.     

Role of Type 1 Fimbriae in the Adhesion of Escherichia coli to Salivary Mucin and Secretory Immunoglobulin A

Saliva is known to modulate the adhesion of bacteria in the oral cavity. The present work was performed to assess the effect of salivary components on the adhesion of Escherichia coli to a model oral surface. Several genetically engineered E. coli strains were used to examine the role of type 1 fimbriation in the interaction of these strains with salivary components in solution or adsorbed to hydroxyapatite. High (MG1) and low (MG2) molecular weight salivary mucins, and secretory immunoglobulin A (sIgA), were found to interact with the surface of E. coli, and these interactions were independent of the expression of fimbriae or capsule. In contrast, fimbriated strains of E. coli adhered to a greater extent to saliva-coated synthetic hydroxyapatite (HAP) than did nonfimbriated strains. Testing of salivary components separated by gel filtration chromatography revealed that only high-molecular-weight components promoted adhesion of E. coli to HAP. Additional studies found that purified MG2 and sIgA promoted the adhesion of E. coli to HAP. Expression of type 1 fimbriae enhanced adhesion, while mannose inhibited adhesion of fimbriated strains, to saliva-coated HAP and to HAP coated with MG2 and sIgA. We conclude that salivary MG2 and sIgA may provide receptors for the adhesion of type 1 fimbriated E. coli to oral surfaces. Received: 10 February 1996 / Accepted: 11 March 1996