Impact of Ty3/<Emphasis Type="Italic">Gypsy</Emphasis> group retrotransposon <Emphasis Type="Italic">Lila</Emphasis> on the D-Genome specificity of common wheat <Emphasis Type="Italic">Triticum aestivum</Emphasis> L.

An analysis of the primary structure of BAC clone 112D20 T. aestivum, that contains D-genome specific Ty3-Gypsy-retrotransposon Lila is presented. PCR analysis of nulli-tetrasomic and deletion lines of T. aestivum allowed to localize this BAC clone in the distal region of the long arm of chromosome 5D. Characteristic feature of BAC clone 112D20 is a high concentration of Ty3-Gypsy-retrotransposons (61.7%), and low content of the genes (1.2%). Only a single open reading frame was revealed homologous to an unknown gene of Ae. tauschii. Specific to the D-genome Ty3-Gypsy-retrotransposon Lila in the BAC clone 112D20 is 14 kb in length and contains unequal in size long terminal repeats. The data of in situ hybridization and PCR analysis of different Triticeae species suggest that this retroelement was amplified within the ancestral species of Ae. tauschii, the donor D-genome. The suggested time of amplification based on estimation of insertion time of Lila 112D20 is 1.7 million years, which corresponds to the formation of the first allopolyploid forms of wheat. Based on comparison with the previously obtained data, it is concluded that the amplification of retroelements specific to each genome of wheat took place during formation of the diploid progenitors of these genomes.     

Comparative genome-wide analysis of repetitive DNA in the genus <Emphasis Type="Italic">Populus</Emphasis> L.

Genome skimming was performed, using Illumina sequence reads, in order to obtain a detailed comparative picture of the repetitive component of the genome of Populus species. Read sets of seven Populus and two Salix species (as outgroups) were subjected to clustering using RepeatExplorer (Novák et al. BMC Bioinformatics 11:378 2010). The repetitive portion of the genome ranged from 33.8 in Populus nigra to 46.5% in Populus tremuloides. The large majority of repetitive sequences were long terminal repeat-retrotransposons. Gypsy elements were over-represented compared to Copia ones, with a mean ratio Gypsy to Copia of 6.7:1. Satellite DNAs showed a mean genome proportion of 2.2%. DNA transposons and ribosomal DNA showed genome proportions of 1.8 and 1.9%, respectively. The other repeat types accounted for less of 1% each. Long terminal repeat-retrotransposons were further characterized, identifying the lineage to which they belong and studying the proliferation times of each lineage in the different species. The most abundant lineage was Athila, which showed large differences among species. Concerning Copia lineages, similar transpositional profiles were observed among all the analysed species; by contrast, differences in transpositional peaks of Gypsy lineages were found. The genome proportions of repeats were compared in the seven species, and a phylogenetic tree was built, showing species separation according to the botanical section to which the species belongs, although significant differences could be found within sections, possibly related to the different geographical origin of the species. Overall, the data indicate that the repetitive component of the genome in the poplar genus is still rapidly evolving.     

A computational study of the dynamics of LTR retrotransposons in the Populus trichocarpa genome

Retrotransposons are an ubiquitous component of plant genomes, especially abundant in species with large genomes. Populus trichocarpa has a relatively small genome, which was entirely sequenced; however, studies focused on poplar retrotransposons dynamics are rare. With the aim to study the retrotransposon component of the poplar genome, we have scanned the complete genome sequence searching full-length long-terminal repeat (LTR) retrotransposons, i.e., characterised by two long terminal repeats at the 5′ and 3′ ends. A computational approach based on detection of conserved structural features, on building multiple alignments, and on similarity searches was used to identify 1,479 putative full-length LTR retrotransposons. Ty1-copia elements were more numerous than Ty3-gypsy. However, many LTR retroelements were not assigned to any superfamily because lacking of diagnostic features and non-autonomous. LTR retrotransposon remnants were by far more numerous than full-length elements, indicating that during the evolution of poplar, large amplification of these elements was followed by DNA loss. Within superfamilies, Ty3-gypsy families are made of more members than Ty1-copia ones. Retrotransposition occurred with increasing frequency following the separation of Populus sections, with different waves of retrotransposition activity between Ty3-gypsy and Ty1-copia elements. Recently inserted elements appear more frequently expressed than older ones. Finally, different levels of activity of retrotransposons were observed according to their position and their density in the linkage groups. On the whole, the results support the view of retrotransposons as a community of different organisms in the genome, whose activity (both retrotransposition and DNA loss) has heavily impacted and probably continues to impact poplar genome structure and size.     

Relationships of gag-pol diversity between <Emphasis Type="Italic">Ty3/Gypsy</Emphasis> and <Emphasis Type="Italic">Retroviridae</Emphasis>LTR retroelements and the three kings hypothesis

Background  

The origin of vertebrate retroviruses (Retroviridae) is yet to be thoroughly investigated, but due to their similarity and identical gag-pol (and env) genome structure, it is accepted that they evolve from Ty3/Gypsy LTR retroelements the retrotransposons and retroviruses of plants, fungi and animals. These 2 groups of LTR retroelements code for 3 proteins rarely studied due to the high variability – gag polyprotein, protease and GPY/F module. In relation to 3 previously proposed Retroviridae classes I, II and II, investigation of the above proteins conclusively uncovers important insights regarding the ancient history of Ty3/Gypsy and Retroviridae LTR retroelements.     

Genome-wide development of transposable elements-based markers in foxtail millet and construction of an integrated database

Transposable elements (TEs) are major components of plant genome and are reported to play significant roles in functional genome diversity and phenotypic variations. Several TEs are highly polymorphic for insert location in the genome and this facilitates development of TE-based markers for various genotyping purposes. Considering this, a genome-wide analysis was performed in the model plant foxtail millet. A total of 30,706 TEs were identified and classified as DNA transposons (24,386), full-length Copia type (1,038), partial or solo Copia type (10,118), full-length Gypsy type (1,570), partial or solo Gypsy type (23,293) and Long- and Short-Interspersed Nuclear Elements (3,659 and 53, respectively). Further, 20,278 TE-based markers were developed, namely Retrotransposon-Based Insertion Polymorphisms (4,801, ∼24%), Inter-Retrotransposon Amplified Polymorphisms (3,239, ∼16%), Repeat Junction Markers (4,451, ∼22%), Repeat Junction-Junction Markers (329, ∼2%), Insertion-Site-Based Polymorphisms (7,401, ∼36%) and Retrotransposon-Microsatellite Amplified Polymorphisms (57, 0.2%). A total of 134 Repeat Junction Markers were screened in 96 accessions of Setaria italica and 3 wild Setaria accessions of which 30 showed polymorphism. Moreover, an open access database for these developed resources was constructed (Foxtail millet Transposable Elements-based Marker Database; http://59.163.192.83/ltrdb/index.html). Taken together, this study would serve as a valuable resource for large-scale genotyping applications in foxtail millet and related grass species.     

Sequencing,identification and mapping of primed L1 elements (SIMPLE) reveals significant variation in full length L1 elements between individuals

Background

There are over a half a million copies of L1 retroelements in the human genome which are responsible for as much as 0.5% of new human genetic diseases. Most new L1 inserts arise from young source elements that are polymorphic in the human genome. Highly active polymorphic “hot” L1 source elements have been shown to be capable of extremely high levels of mobilization and result in numerous instances of disease. Additionally, hot polymorphic L1s have been described to be highly active within numerous cancer genomes. These hot L1s result in mutagenesis by insertion of new L1 copies elsewhere in the genome, but also have been shown to generate additional full length L1 insertions which are also hot and able to further retrotranspose. Through this mechanism, hot L1s may amplify within a tumor and result in a continued cycle of mutagenesis.

Results and conclusions

We have developed a method to detect full-length, polymorphic L1 elements using a targeted next generation sequencing approach, Sequencing Identification and Mapping of Primed L1 Elements (SIMPLE). SIMPLE has 94% sensitivity and detects nearly all full-length L1 elements in a genome. SIMPLE will allow researchers to identify hot mutagenic full-length L1s as potential drivers of genome instability. Using SIMPLE we find that the typical individual has approximately 100 non-reference, polymorphic L1 elements in their genome. These elements are at relatively low population frequencies relative to previously identified polymorphic L1 elements and demonstrate the tremendous diversity in potentially active L1 elements in the human population.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1374-y) contains supplementary material, which is available to authorized users.     

Genome Size Evolution Mediated by Gypsy Retrotransposons in Brassicaceae

The dynamic activity of transposable elements (TEs) contributes to the vast diversity of genome size and architecture among plants. Here, we examined the genomic distribution and transposition activity of long terminal repeat retrotransposons (LTR-RTs) in Arabidopsis thaliana (Ath) and three of its relatives, Arabidopsis lyrata (Aly), Eutrema salsugineum (Esa), and Schrenkiella parvula (Spa), in Brassicaceae. Our analyses revealed the distinct evolutionary dynamics of Gypsy retrotransposons, which reflects the different patterns of genome size changes of the four species over the past million years. The rate of Gypsy transposition in Aly is approximately five times more rapid than that of Ath and Esa, suggesting an expanding Aly genome. Gypsy insertions in Esa are strictly confined to pericentromeric heterochromatin and associated with dramatic centromere expansion. In contrast, Gypsy insertions in Spa have been largely suppressed over the last million years, likely as a result of a combination of an inherent molecular mechanism of preferential DNA removal and purifying selection at Gypsy elements. Additionally, species-specific clades of Gypsy elements shaped the distinct genome architectures of Aly and Esa.     

Temporal dynamics in the evolution of the sunflower genome as revealed by sequencing and annotation of three large genomic regions

Improved knowledge of genome composition, especially of its repetitive component, generates important informations in both theoretical and applied research. In this study, we provide the first insight into the local organization of the sunflower genome by sequencing and annotating 349,380 bp from 3 BAC clones, each including one single-copy gene. These analyses resulted in the identification of 11 putative gene sequences, 18 full-length LTR retrotransposons, 6 incomplete LTR retrotransposons, 2 non-autonomous LTR-retroelements (LINEs), 2 putative DNA transposons fragments and one putative helitron. Among LTR-retrotransposons, non-autonomous elements (the so-called LARDs), which do not carry any protein-encoding sequence, were discovered for the first time in the sunflower. The insertion time of intact retroelements was measured, based on sister LTRs divergence. All isolated elements were inserted relatively recently, especially those belonging to the Gypsy superfamily. Retrotransposon families related to those identified in the BAC clones are present also in other species of Helianthus, both annual and perennial, and even in other Asteraceae. In one of the three BAC clones, we found five copies of a lipid transfer protein (LTP) encoding gene within less than 100,000 bp, four of which are potentially functional. Two of these are interrupted by LTR retrotransposons, in the intron and in the coding sequence, respectively. The divergence between sister LTRs of the retrotransposons inserted within the genes indicates that LTP gene duplication started earlier than 1.749 MYRS ago. On the whole, the results reported in this study confirm that the sunflower is an excellent system to study transposons dynamics and evolution.     

Major repeat components covering one‐third of the ginseng (Panax ginseng C.A. Meyer) genome and evidence for allotetraploidy

Ginseng (Panax ginseng) is a famous medicinal herb, but the composition and structure of its genome are largely unknown. Here we characterized the major repeat components and inspected their distribution in the ginseng genome. By analyzing three repeat‐rich bacterial artificial chromosome (BAC) sequences from ginseng, we identified complex insertion patterns of 34 long terminal repeat retrotransposons (LTR‐RTs) and 11 LTR‐RT derivatives accounting for more than 80% of the BAC sequences. The LTR‐RTs were classified into three Ty3/gypsy (PgDel, PgTat and PgAthila) and two Ty1/Copia (PgTork and PgOryco) families. Mapping of 30‐Gbp Illumina whole‐genome shotgun reads to the BAC sequences revealed that these five LTR‐RT families occupy at least 34% of the ginseng genome. The Ty3/Gypsy families were predominant, comprising 74 and 33% of the BAC sequences and the genome, respectively. In particular, the PgDel family accounted for 29% of the genome and presumably played major roles in enlargement of the size of the ginseng genome. Fluorescence in situ hybridization (FISH) revealed that the PgDel1 elements are distributed throughout the chromosomes along dispersed heterochromatic regions except for ribosomal DNA blocks. The intensity of the PgDel2 FISH signals was biased toward 24 out of 48 chromosomes. Unique gene probes showed two pairs of signals with different locations, one pair in subtelomeric regions on PgDel2‐rich chromosomes and the other in interstitial regions on PgDel2‐poor chromosomes, demonstrating allotetraploidy in ginseng. Our findings promote understanding of the evolution of the ginseng genome and of that of related species in the Araliaceae.     

Copia and Gypsy retrotransposons activity in sunflower (Helianthus annuus L.)

Background  

Retrotransposons are heterogeneous sequences, widespread in eukaryotic genomes, which refer to the so-called mobile DNA. They resemble retroviruses, both in their structure and for their ability to transpose within the host genome, of which they make up a considerable portion. Copia- and Gypsy-like retrotransposons are the two main classes of retroelements shown to be ubiquitous in plant genomes. Ideally, the retrotransposons life cycle results in the synthesis of a messenger RNA and then self-encoded proteins to process retrotransposon mRNA in double stranded extra-chromosomal cDNA copies which may integrate in new chromosomal locations.     

Structure,behaviour and repetitive DNA of B-chromosomes in Cestrum nocturnum (Solanaceae)

Abstract

The Cestrum genus is karyotypically exceptional in Solanaceae. It is characterised by a basic number x?=?8, a large chromosomal and genomic size, complex heterochromatin patterns, B-chromosomes (Bs) with particular heterochromatin and distribution of 18–5.8–26S and 5S rDNA. Cestrum nocturnum L. has a diploid number of 2n?=?16 plus a variable number of B-chromosomes. The aims of work was to analyse their numerical variation, structure and behaviour of C. nocturnum B-chromosomes by classical and molecular cytogenetics. The individuals analysed had 2n?=?16?+?0?13 B-chromosomes. All B-chromosomes were metacentric and smaller than A-chromosomes. The number of B-chromosomes showed a great variability between and within individuals, thereby denoting the occurrence of events that promote mitotic and meiotic instability. Cytogenetic techniques made it possible to observe that B-chromosomes are rich in heterochromatin, probably with AT- and GC-rich regions. In addition, molecular techniques allowed to detect homologous sequences of transposable element conserved domains of Ty1-Copia and Ty3-Gypsy superfamilies. These sequences were located by FISH in all B-chromosomes and some A-chromosomes. Our results showed that repetitive DNA could play an important role in chromosomal evolution as well as in the stability of B-chromosomes in C. nocturnum.     

Next generation sequencing reveals genome downsizing in allotetraploid Nicotiana tabacum, predominantly through the elimination of paternally derived repetitive DNAs

We used next generation sequencing to characterize and compare the genomes of the recently derived allotetraploid, Nicotiana tabacum (<200,000 years old), with its diploid progenitors, Nicotiana sylvestris (maternal, S-genome donor), and Nicotiana tomentosiformis (paternal, T-genome donor). Analysis of 14,634 repetitive DNA sequences in the genomes of the progenitor species and N. tabacum reveal all major types of retroelements found in angiosperms (genome proportions range between 17-22.5% and 2.3-3.5% for Ty3-gypsy elements and Ty1-copia elements, respectively). The diploid N. sylvestris genome exhibits evidence of recent bursts of sequence amplification and/or homogenization, whereas the genome of N. tomentosiformis lacks this signature and has considerably fewer homogenous repeats. In the derived allotetraploid N. tabacum, there is evidence of genome downsizing and sequences loss across most repeat types. This is particularly evident amongst the Ty3-gypsy retroelements in which all families identified are underrepresented in N. tabacum, as is 35S ribosomal DNA. Analysis of all repetitive DNA sequences indicates the T-genome of N. tabacum has experienced greater sequence loss than the S-genome, revealing preferential loss of paternally derived repetitive DNAs at a genome-wide level. Thus, the three genomes of N. sylvestris, N. tomentosiformis, and N. tabacum have experienced different evolutionary trajectories, with genomes that are dynamic, stable, and downsized, respectively.     

Diploidization and genome size change in allopolyploids is associated with differential dynamics of low‐ and high‐copy sequences

Recent advances have highlighted the ubiquity of whole‐genome duplication (polyploidy) in angiosperms, although subsequent genome size change and diploidization (returning to a diploid‐like condition) are poorly understood. An excellent system to assess these processes is provided by Nicotiana section Repandae, which arose via allopolyploidy (approximately 5 million years ago) involving relatives of Nicotiana sylvestris and Nicotiana obtusifolia. Subsequent speciation in Repandae has resulted in allotetraploids with divergent genome sizes, including Nicotiana repanda and Nicotiana nudicaulis studied here, which have an estimated 23.6% genome expansion and 19.2% genome contraction from the early polyploid, respectively. Graph‐based clustering of next‐generation sequence data enabled assessment of the global genome composition of these allotetraploids and their diploid progenitors. Unexpectedly, in both allotetraploids, over 85% of sequence clusters (repetitive DNA families) had a lower abundance than predicted from their diploid relatives; a trend seen particularly in low‐copy repeats. The loss of high‐copy sequences predominantly accounts for the genome downsizing in N. nudicaulis. In contrast, N. repanda shows expansion of clusters already inherited in high copy number (mostly chromovirus‐like Ty3/Gypsy retroelements and some low‐complexity sequences), leading to much of the genome upsizing predicted. We suggest that the differential dynamics of low‐ and high‐copy sequences reveal two genomic processes that occur subsequent to allopolyploidy. The loss of low‐copy sequences, common to both allopolyploids, may reflect genome diploidization, a process that also involves loss of duplicate copies of genes and upstream regulators. In contrast, genome size divergence between allopolyploids is manifested through differential accumulation and/or deletion of high‐copy‐number sequences.     

LTR retrotransposons from the <Emphasis Type="Italic">Citrus x clementina</Emphasis> genome: characterization and application

Long terminal repeat retrotransposons (LTR-RTs) are a large portion of most plant genomes, and can be used as a powerful molecular marker system. The first citrus reference genome (Citrus x clementina) has been publicly available since 2011; however, previous studies in citrus have not utilized the whole genome for LTR-RT marker development. In this study, 3959 full-length LTR-RTs were identified in the C. x clementina genome using structure-based (LTR_FINDER) and homology-based (RepeatMasker) methods. LTR-RTs were first classified by protein domain into Gypsy and Copia superfamilies, and then clustered into 1074 families based on LTR sequence similarity. Three hundred fifty Copia families were grouped into four lineages: Retrofit, Tork, Sire, and Oryco. One hundred seventy-eight Gypsy families were sorted into six lineages: Athila, Tat, Renia, CRM, Galadriel, and Del. Most LTR-RTs (3218 or 81.3%) were anchored to the nine Clementine mandarin linkage groups, accounting for 9.74% of chromosomes currently assembled. Accessions of 25 Rutaceae species were genotyped using 17 inter-retrotransposon amplified polymorphism (IRAP) markers developed from conserved LTR regions. Sequence-specific amplified polymorphism (SSAP) makers were used to distinguish ‘Valencia’ and ‘Pineapple’ sweet oranges (C. x sinensis), and 24 sweet orange clones. LTR-RT markers developed from the Clementine genome can be transferred within the Rutaceae family demonstrating that they are an excellent tool for citrus and Rutaceae genetic analysis.     

Analysis of transposons and repeat composition of the sunflower (Helianthus annuus L.) genome

A sample-sequencing strategy combined with slot–blot hybridization and FISH was used to study the composition of the repetitive component of the sunflower genome. One thousand six hundred thirty-eight sequences for a total of 954,517 bp were analyzed. The fraction of sequences that can be classified as repetitive using computational and hybridization approaches amounts to 62% in total. Almost two thirds remain as yet uncharacterized in nature. Of those characterized, most belong to the gypsy superfamily of LTR-retrotransposons. Unlike in other species, where single families can account for large fractions of the genome, it appears that no transposon family has been amplified to very high levels in sunflower. All other known classes of transposable elements were also found. One family of unknown nature (contig 61) was the most repeated in the sunflower genome. The evolution of the repetitive component in the Helianthus genus and in other Asteraceae was studied by comparative analysis of the hybridization of total genomic DNAs from these species to the sunflower small-insert library and compared to gene-based phylogeny. Very little similarity is observed between Helianthus species and two related Asteraceae species outside of the genus. Most repetitive elements are similar in annual and perennial Helianthus species indicating that sequence amplification largely predates such divergence. Gypsy-like elements are more represented in the annuals than in the perennials, while copia-like elements are similarly represented, attesting a different amplification history of the two superfamilies of LTR-retrotransposons in the Helianthus genus.     

Meiotic Recombination Initiation in and around Retrotransposable Elements in Saccharomyces cerevisiae

Meiotic recombination is initiated by large numbers of developmentally programmed DNA double-strand breaks (DSBs), ranging from dozens to hundreds per cell depending on the organism. DSBs formed in single-copy sequences provoke recombination between allelic positions on homologous chromosomes, but DSBs can also form in and near repetitive elements such as retrotransposons. When they do, they create a risk for deleterious genome rearrangements in the germ line via recombination between non-allelic repeats. A prior study in budding yeast demonstrated that insertion of a Ty retrotransposon into a DSB hotspot can suppress meiotic break formation, but properties of Ty elements in their most common physiological contexts have not been addressed. Here we compile a comprehensive, high resolution map of all Ty elements in the rapidly and efficiently sporulating S. cerevisiae strain SK1 and examine DSB formation in and near these endogenous retrotransposable elements. SK1 has 30 Tys, all but one distinct from the 50 Tys in S288C, the source strain for the yeast reference genome. From whole-genome DSB maps and direct molecular assays, we find that DSB levels and chromatin structure within and near Tys vary widely between different elements and that local DSB suppression is not a universal feature of Ty presence. Surprisingly, deletion of two Ty elements weakened adjacent DSB hotspots, revealing that at least some Ty insertions promote rather than suppress nearby DSB formation. Given high strain-to-strain variability in Ty location and the high aggregate burden of Ty-proximal DSBs, we propose that meiotic recombination is an important component of host-Ty interactions and that Tys play critical roles in genome instability and evolution in both inbred and outcrossed sexual cycles.