Calorimetric and circular dichroic studies of the thermal denaturation of beta-lactoglobulin

The thermal denaturation of beta-lactoglobulin in aqueous solutions at pH 5.5 and 2.0 was investigated by differential scanning calorimetry (DSC) and circular dichroic (CD) measurements. By calorimetry, the denaturation temperatures (Td), denaturation enthalpies, and specific heat capacity changes for thermal denaturation in the temperature range scanned, i.e., 20-100 degrees C. The unfolding process was found to be only partially reversible. Analysis of the far-ultraviolet CD spectra reveals that with increasing temperature the mean residue ellipticity [( theta]) becomes less negative, which reflects unfolding of the native protein. At the highest temperature of CD measurements, i.e., 80 degrees C, conformational changes are to a large extent reversible.     

Thermal stability of Phaseolus vulgaris leucoagglutinin: a differential scanning calorimetry study

Phaseolus vulgaris phytohemagglutinin L is a homotetrameric-leucoagglutinating seed lectin. Its three-dimensional structure shows similarity with other members of the legume lectin family. The tetrameric form of this lectin is pH dependent. Gel filtration results showed that the protein exists in its dimeric state at pH 2.5 and as a tetramer at pH 7.2. Contrary to earlier reports on legume lectins that possess canonical dimers, thermal denaturation studies show that the refolding of phytohemagglutinin L at neutral pH is irreversible. Differential scanning calorimetry (DSC) was used to study the denaturation of this lectin as a function of pH that ranged from 2.0 to 3.0. The lectin was found to be extremely thermostable with a transition temperature around 82 degrees C and above 100 degrees C at pH 2.5 and 7.2, respectively. The ratio of calorimetric to vant Hoff enthalpy could not be calculated because of its irreversible-folding behavior. However, from the DSC data, it was discovered that the protein remains in its compact-folded state, even at pH 2.3, with the onset of denaturation occurring at 60 degrees C.     

A comparative infrared spectroscopic study of glycoside hydrolases from extremophilic archaea revealed different molecular mechanisms of adaptation to high temperatures

The identification of the determinants of protein thermal stabilization is often pursued by comparing enzymes from hyperthermophiles with their mesophilic counterparts while direct structural comparisons among proteins and enzymes from hyperthermophiles are rather uncommon. Here, oligomeric beta-glycosidases from the hyperthermophilic archaea Sulfolobus solfataricus (Ss beta-gly), Thermosphaera aggregans (Ta beta-gly), and Pyrococcus furiosus (Pf beta-gly), have been compared. Studies of FTIR spectroscopy and kinetics of thermal inactivation showed that the three enzymes had similar secondary structure composition, but Ss beta-gly and Ta beta-gly (temperatures of melting 98.1 and 98.4 degrees C, respectively) were less stable than Pf beta-gly, which maintained its secondary structure even at 99.5 degrees C. The thermal denaturation of Pf beta-gly, followed in the presence of SDS, suggested that this enzyme is stabilized by hydrophobic interactions. A detailed inspection of the 3D-structures of these enzymes supported the experimental results: Ss beta-gly and Ta beta-gly are stabilized by a combination of ion-pairs networks and intrasubunit S-S bridges while the increased stability of Pf beta-gly resides in a more compact protein core. The different strategies of protein stabilization give experimental support to recent theories on thermophilic adaptation and suggest that different stabilization strategies could have been adopted among archaea.     

The unusually slow relaxation kinetics of the folding-unfolding of pyrrolidone carboxyl peptidase from a hyperthermophile, Pyrococcus furiosus

In order to understand the thermodynamic and kinetic basis of the intrinsic stability of proteins from hyperthermophiles, the folding-unfolding reactions of cysteine-free pyrrolidone carboxyl peptidase (Cys142/188Ser) (PCP-0SH) from Pyrococcus furiosus were examined using circular dichroism (CD) and differential scanning calorimetry (DSC) at pH 2.3, where PCP-0SH exists in monomeric form. DSC showed a strong dependence of the shape and position of the unfolding profiles on the scan rate, suggesting the stability of PCP-0SH under kinetic control. On DSC timescales, even at a scan rate of 1 deg. C/hour, heat denaturation of PCP-0SH was non-equilibrium. However, over a long period of incubation of the heat-denatured PCP-0SH at pre-transition temperatures, it refolded completely, indicating reversibility with very slow relaxation kinetics. The rates of refolding of the heat-denatured PCP-0SH determined from the time-resolved DSC and CD spectroscopic progress curves were found to be similar within experimental error, confirming the mechanism of refolding to be a two-state process. The equilibrium established with a relaxation time of 5080 seconds (at t(m)=46.5 degrees C), which is unusually higher than the relaxation times observed for mesophilic and hyperthermophilic proteins. The long relaxation time may lead to the apparent irreversibility of an unfolding process occurring on the DSC experiment timescale. The refolding rate (9.8 x 10(-5) s(-1)) peaked near the t(m) (=46.5 degrees C), whereas the stability profile reached maxima (11.8 kJ mol(-1)) at 17 degrees C. The results clearly indicate the unusual mode of protein destabilization via a drastic decrease in the rate of folding at low pH and still maintaining a high activation energy barrier (284 kJ mol(-1)) for unfolding, which provides an effective kinetic advantage to unusually stable proteins from hyperthermophiles.     

Stabilization of a tetrameric malate dehydrogenase by introduction of a disulfide bridge at the dimer-dimer interface

Malate dehydrogenase (MDH) from the moderately thermophilic bacterium Chloroflexus aurantiacus (CaMDH) is a tetrameric enzyme, while MDHs from mesophilic organisms usually are dimers. To investigate the potential contribution of the extra dimer-dimer interface in CaMDH with respect to thermal stability, we have engineered an intersubunit disulfide bridge designed to strengthen dimer-dimer interactions. The resulting mutant (T187C, containing two 187-187 disulfide bridges in the tetramer) showed a 200-fold increase in half-life at 75 degrees C and an increase of 15 deg. C in apparent melting temperature compared to the wild-type. The crystal structure of the mutant (solved at 1.75 A resolution) was essentially identical with that of the wild-type, with the exception of the added inter-dimer disulfide bridge and the loss of an aromatic intra-dimer contact. Remarkably, the mutant and the wild-type had similar temperature optima and activities at their temperature optima, thus providing a clear case of uncoupling of thermal stability and thermoactivity. The results show that tetramerization may contribute to MDH stability to an extent that depends strongly on the number of stabilizing interactions in the dimer-dimer interface.     

Thermodynamic basis for the stabilities of three CutA1s from Pyrococcus horikoshii,Thermus thermophilus, and Oryza sativa, with unusually high denaturation temperatures

In order to elucidate the stabilization mechanism of CutA1 from Pyrococcus horikoshii (PhCutA1) with a denaturation temperature of nearly 150 degrees C, GuHCl denaturation and heat denaturation were examined at neutral and acidic pHs. As a comparison, CutA1 proteins from Thermus thermophilus (TtCutA1) and Oryza sativa (OsCutA1) were also examined, which have lower optimum growth temperatures of 75 and 28 degrees C, respectively, than that (98 degrees C) of P. horikoshii. GuHCl-induced unfolding and refolding curves of the three proteins showed hysteresis effects due to an unusually slow unfolding rate. The midpoints of refolding for PhCutA1, TtCutA1 and OsCutA1 were 5.7 M, 3.3 M, and 2.3 M GuHCl, respectively, at pH 8.0 and 37 degrees C. DSC experiments with TtCutA1 and OsCutA1 showed that the denaturation temperatures were remarkably high, 112.8 and 97.3 degrees C, respectively, at pH 7.0 and that the good heat reversibility was amenable to thermodynamic analyses. At acidic pH, TtCutA1 showed higher stability to both heat and denaturant than PhCutA1. Combined with the data for DSC and denaturant denaturation, the unfolding Gibbs energy of PhCutA1 could be depicted as a function of temperature. It was experimentally revealed that (1) the unusually high stability of PhCutA1 basically originates from a common trimer structure of the three proteins, (2) the stability of PhCutA1 is superior to those of the other two CutA1s over all temperatures above 0 degrees C at neutral pH, due to the decrease in both enthalpy and entropy, and (3) ion pairs of PhCutA1 contribute to the unusually high stability at neutral pH.     

Thermodynamics of the denaturation of lysozyme in alcohol--water mixtures.

The thermal denaturation of lysozyme was studied at pH 2 in aqueous mixtures of methanol, ethanol, and 1-propanol by high sensitivity differential scanning calorimetry (DSC). The most obvious effect of alcohols was the lowering of Td, the temperature of denaturation, increasingly with higher alcohol concentration and longer alkyl chain. Both the calorimetric and van't Hoff enthalpies of denaturation initially increased and then decreased with increasing alcohol concentration, the ratio of the two enthalpies being nearly unity, 1.007 +/- 0.011, indicating the validity of the two-state approximation for the unfolding of lysozyme in these solvent systems. The reversibility of the denaturation was demonstrated by the reversibility of the DSC curves and the complete recovery of enzymic activity on cooling. The changes in heat capacity on unfolding decreased with increasing alcohol concentration for each alcohol. Experimentally determined values of denaturation temperature and of entropy and heat capacity changes were used to derive the additional thermodynamic parameters delta G degrees and delta S degrees for denaturation as a function of temperature for each alcohol--water mixture. Comparison of the thermodynamic parameters with those reported [Pfeil, W., & Privalov, P.L. (1976) Biophys. Chem. 4, 23--50] in aqueous solution at various values of pH and guanidine hydrochloride concentration showed that these latter changes have no effect on the heat capacity changes, whereas the addition of alcohols causes a sharp decrease.     

Mechanism of stabilization of Bacillus circulans xylanase upon the introduction of disulfide bonds

The introduction of disulfide bonds has been used as a strategy to enhance the stability of Bacillus circulans xylanase. The transition temperature of the S100C/N148C (DS1), V98C/A152C (DS2), and A1GC/G187,C188 (cXl) in comparison to the wild type was increased by 5.0, 4.1 and 3.8 degrees C, respectively. Interestingly, a combination of two disulfide bonds of DS1 and cXl (cDS1, circular disulfide 1) led to a 12 degrees C increase in the transition temperature. Importantly, an increase in the melting point and DeltaDeltaG values of the cDS1 mutant was cooperative. These results suggest that the mechanism of stabilization by disulfide bonds under irreversible denaturation condition is achieved through: (1) a change in the rate-limiting step on the denaturation pathway; (2) destabilizing the unfolded state without affecting the relative rate constants on the denaturation pathway (like cXl mutant); and (3) or combination of the two (cDS1 mutant).     

Overexpression, physicochemical characterization, and modeling of a hyperthermophilic pyrococcus furiosus type 2 IPP isomerase

In the first step of this study, type 2 isopentenyl diphosphate isomerase (IDI2) from Pyrococcus furiosus (pf-IDI2), a hyperthermophilic microorganism, was cloned and overexpressed in E. coli. After purification, hyperthermophilic behavior of this protein was approached by means of enzymatic assays and thermal denaturation studies. Compared with the mesophilic Streptococcus pneumoniae IDI2, which unfolds and looses activity above 50 degrees C, pf-IDI2 is still folded and active at 80 degrees C. Molecular modeling was applied, in a parallel step, to understand the molecular basis of thermal stability. Comparison of IDI2 from S. pneumoniae, T. thermophilus, and P. furiosus suggested that additional charged residues present in the hyperthermophilic enzyme might contribute to its higher thermal stability. This could increase the number of salt bridges between monomers of IDI2 in P. furiosus enzyme and, hence, decrease flexibility of loops or N-terminal segment, thereby enhancing its thermal stability.     

Microcalorimetric study of iodized and noniodized cells and C-phycocyanin of Spirulina platensis

It was shown that eight stages of transition are observed in the heating process of Spirulina platensis cells in temperature range 5-140 degrees C. The first stage covers the temperature range 5-53 degrees C with maximum approximately 45 degrees C. The heat evolved in this temperature range is equal to 380 +/- 20 J/g of dry biomass, it does not change at scanning rate lower than 0.083 degrees C/min and belongs, mainly, to cell respiration in a stationary regime, in the dark. It was shown that endotherm approximately 66 degrees C belongs to denaturation of C-phycocyanin which denaturates in solutions with Td = 64.2 degrees C, deltaHd = 34.7 +/- 2.1 J/g and for it deltaHd(cal)/deltaH(V.H) is equal to 10.8 +/- 1.2. The endotherms with Td equal to 58 and 88 degrees C are connected with denaturation of phycobilisome proteins and endotherm with Td = 48 degrees C and deltaHd = 4.2J/g of dry biomass-with denaturation of protein which, apparently, is connected with cell respiration.     

Solution NMR characterization of the thermodynamics of the disulfide bond orientational isomerism and its effect of cluster electronic properties for the hyperthermostable three-iron cluster ferredoxin from the archaeon Pyrococcus furiosus

The thermodynamics and dynamics of the Cys21-Cys48 disulfide "S" if "R" conformational isomerism in the three-iron, single cubane cluster ferredoxin (Fd) from the hyperthermophilic archaeon Pyrococcus furiosus (Pf) have been characterized by (1)H NMR spectroscopy in both water and water/methanol mixed solvents. The mean interconversion rate at 25 degrees C is 3 x 10(3) s(-1) and DeltaG(298) = -0.2 kcal/mol [DeltaH = 4.0 kcal/mol; DeltaS = 14 cal/(mol.K)], with the S orientation as the more stable form at low temperature (< 0 degrees C) but the R orientation predominating at >100 degrees C, where the organism thrives. The distinct pattern of ligated Cys beta-proton contact shifts for the resolved signals and their characteristic temperature behavior for the forms of the 3Fe Fd with alternate disulfide orientations have been analyzed to determine the influences of disulfide orientation and methanol cosolvent on the topology of the inter-iron spin coupling in the 3Fe cluster. The Cys21-Cys48 disulfide orientation influences primarily the spin couplings involving the iron ligated to Cys17, whose carbonyl oxygen is a hydrogen bond acceptor to the Cys21 peptide proton. Comparison of the Cys beta-proton contact shift pattern for the alternate disulfide orientations with the pattern exhibited upon cleaving the disulfide bridge confirms an earlier [Wang, P.-L., Calzolai, L., Bren, K. L., Teng, Q., Jenney, F. E., Jr., Brereton, P. S., Howard, J. B., Adams, M. W. W., and La Mar, G. N. (1999) Biochemistry 38, 8167-8178] proposal that the structure of the same Fd with the R disulfide orientation resembles that of the Fd upon cleaving the disulfide bond.     

Completely buried, non-ion-paired glutamic acid contributes favorably to the conformational stability of pyrrolidone carboxyl peptidases from hyperthermophiles

Pyrrolidone carboxyl peptidases (PCPs) from hyperthermophiles have a structurally conserved and completely buried Glu192 in the hydrophobic core; in contrast, the corresponding residue in the mesophile protein is a hydrophobic residue, Ile. Does the buried ionizable residue contribute to stabilization or destabilization of hyperthermophile PCPs? To elucidate the role of the buried glutamic acid in stabilizing PCP from hyperthermophiles, we constructed five Glu192 mutants of PCP-0SH (C142S/C188S, Cys-free double mutant of PCP) from Pyrococcus furiosus and examined their thermal and pH-induced unfolding and crystal structures and compared them with those of PCP-0SH. The stabilities of apolar (E192A/I/V) and polar (E192D/Q) mutants were less than PCP-0SH at acidic pH values. In the alkaline region, the mutant proteins, except for E192D, were more stable than PCP-0SH. The thermal stability data and theoretical calculations indicated an apparent pKa value > or = 7.3 for Glu192. Present results confirmed that the protonated Glu192 in PCP-0SH forms strong hydrogen bonds with the carbonyl oxygen and peptide nitrogen of Pro168. New intermolecular hydrogen bonds in the E --> A/D mutants were formed by a water molecule introduced into the cavity created around position 192, whereas the hydrogen bonds disappeared in the E --> I/V mutants. Structure-based empirical stability of mutant proteins was in good agreement with the experimental results. The results indicated that (1) completely buried Glu192 contributes to the stabilization of PCP-0SH because of the formation of strong intramolecular hydrogen bonds and (2) the hydrogen bonds by the nonionized and buried Glu can contribute more than the burial of hydrophobic groups to the conformational stability of proteins.     

Enthalpic destabilization of a mutant human lysozyme lacking a disulfide bridge between cysteine-77 and cysteine-95.

To understand the role of disulfide bridges in protein stability, the thermodynamic changes in the denaturation of two mutant human lysozymes lacking a disulfide bridge between Cys-77 and Cys-95 (C77A and C77/95A) were analyzed using differential scanning calorimetry (DSC). At pH 3.0 and 57 degrees C, the stabilities of both the C77A and C77/95A mutants were decreased about 4.6 kcal.mol-1 in Gibbs free energy change. Under the same conditions, the enthalpy changes (delta H) were 94.8 and 90.8 kcal.mol-1, respectively, which were smaller than that of the wild type (100.8 kcal.mol-1). The destabilization of the mutants was caused by enthalpic factors. Although X-ray crystallography indicated that the mutants preserve the wild-type tertiary structure, removal of the disulfide bridge increased the flexibility of the native state of the mutants. This was indicated both by an increase in the crystallographic thermal factors (B-factors) and by a decrease in the affinity of N-acetylglucosamine trimer [(NAG)3] observed using isothermal titration calorimetry (DTC) due to entropic effects. Thus, the effect of cross-linking on the stability of a protein is not solely explained by the entropy change in denaturation.     

Changes in structure and in interactions of heat-treated bovine beta-lactoglobulin

Heat stress on structure and ligand binding of beta-LG has been studied by fluorescence, circular dichroism and gel electrophoresis at pH 6.5. Native PAGE gel electrophoresis shows that denaturation of beta-LG is reversible up to 75 degrees C then it becomes irreversible due to aggregation of beta-LG. Formation of aggregated beta-LG is completed at 95 degrees C. Circular dichroism results indicate that formation of aggregated beta-LG is accompanied by the scrambling of disulfide bonds (creation of new intramolecular and intermolecular disulfide bridges and rearrangement of old intramolecular disulfide bridges). Addition of ethanolic retinol causes a change in polarity of the solution and favors transformation of the beta<-->alpha structure. In the presence of retinol, the alpha-helix content of the secondary structure of heat-treated beta-LG is increased and the major portion of its secondary structure is helical. Fluorescence results show that heat-treated beta-LG at 95 degrees C can still bind retinol. The refolding of the tertiary structure of beta-LG heat-denatured at 95 degrees C may recreate a retinol binding site. Surprisingly, the affinity of the new site for retinol is higher than that of native beta-LG; however, the apparent molar ratio is lower than one. The binding properties of beta-LG for terpenoids have been measured after its heat treatment at 20, 75 and 95 degrees C. The intensity of tryptophan emission at 330 nm was changed only in the case of the interaction with beta-ionone. Other ligands probably cannot bind to beta-LG or they bind in a binding site far from the tryptophan residues, hence not affecting its fluorescence.     

Difference in the mechanisms of the cold and heat induced unfolding of thioredoxin h from Chlamydomonas reinhardtii: spectroscopic and calorimetric studies

The thermodynamic stability and temperature induced structural changes of oxidized thioredoxin h from Chlamydomonas reinhardtii have been studied using differential scanning calorimetry (DSC), near- and far-UV circular dichroism (CD), and fluorescence spectroscopies. At neutral pH, the heat induced unfolding of thioredoxin h is irreversible. The irreversibly unfolded protein is unable to refold due to the formation of soluble high-order oligomers. In contrast, at acidic pH the heat induced unfolding of thioredoxin h is fully reversible and thus allows the thermodynamic stability of this protein to be characterized. Analysis of the heat induced unfolding at acidic pH using calorimetric and spectroscopic methods shows that the heat induced denaturation of thioredoxin h can be well approximated by a two-state transition. The unfolding of thioredoxin h is accompanied by a large heat capacity change [6.0 +/- 1.0 kJ/(mol.K)], suggesting that at low pH a cold denaturation should be observed at the above-freezing temperatures for this protein. All used methods (DSC, near-UV CD, far-UV CD, Trp fluorescence) do indeed show that thioredoxin h undergoes cold denaturation at pH <2.5. The cold denaturation of thioredoxin h cannot, however, be fitted to a two-state model of unfolding. Furthermore, according to the far-UV CD, thioredoxin h is fully unfolded at pH 2.0 and 0 degrees C, whereas the other three methods (near-UV CD, fluorescence, and DSC) indicate that under these conditions 20-30% of the protein molecules are still in the native state. Several alternative mechanisms explaining these results such as structural differences in the heat and cold denatured state ensembles and the two-domain structure of thioredoxin h are discussed.     

Molecular Forms of Acetylcholinesterase from Human Caudate Nucleus: Comparison of Salt-Soluble and Detergent-Soluble Tetrameric Enzyme Species

Extraction of human caudate nucleus under high-ionic-strength conditions solubilized 20-30% of total acetylcholinesterase (AChE) activity. Density gradient centrifugation revealed monomeric (5.0 S) and tetrameric (11.0 S) enzyme species. The purified, tetrameric salt-soluble (SS) AChE sedimented at 10.6 S and did not bind detergents. It showed an immunochemical reaction of identity with the detergent-soluble (DS) AChE species from human caudate nucleus and human erythrocytes, but did not cross-react with antibodies raised against human serum cholinesterase. The remaining activity was solubilized under low-ionic-strength conditions in the presence of 1.0% Triton X-100. The purified tetrameric, DS-AChE sedimented at 10.0 S as detergent-protein mixed micelle and on extensive removal of the detergent this enzyme formed defined aggregates by self-micellarization. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis under nonreducing conditions revealed that the salt-soluble and detergent-soluble tetrameric enzyme species both contained a heavy and a light dimer; under reducing conditions mainly one band corresponding to the light subunit was seen. Molecular weights of 300,000 dalton and 280,000 dalton were calculated for SS-AChE and DS-AChE, respectively. Limited digestion of DS-AChE with proteinase K led to isolation of an enzyme that no longer bound detergents and lacked the intersubunit disulfide bridges.     

Methylthioadenosine phosphorylase from the archaeon Pyrococcus furiosus. Mechanism of the reaction and assignment of disulfide bonds.

The extremely heat-stable 5'-methylthioadenosine phosphorylase from the hyperthermophilic archaeon Pyrococcus furiosus was cloned, expressed to high levels in Escherichia coli, and purified to homogeneity by heat precipitation and affinity chromatography. The recombinant enzyme was subjected to a kinetic analysis including initial velocity and product inhibition studies. The reaction follows an ordered Bi-Bi mechanism and phosphate binding precedes nucleoside binding in the phosphorolytic direction. 5'-Methylthioadenosine phosphorylase from Pyrococcus furiosus is a hexameric protein with five cysteine residues per subunit. Analysis of the fragments obtained after digestion of the protein alkylated without previous reduction identified two intrasubunit disulfide bridges. The enzyme is very resistant to chemical denaturation and the transition midpoint for guanidinium chloride-induced unfolding was determined to be 3.0 M after 22 h incubation. This value decreases to 2.0 M in the presence of 30 mM dithiothreitol, furnishing evidence that disulfide bonds are needed for protein stability. The guanidinium chloride-induced unfolding is completely reversible as demonstrated by the analysis of the refolding process by activity assays, fluorescence measurements and SDS/PAGE. The finding of multiple disulfide bridges in 5'-methylthioadenosine phosphorylase from Pyrococcus furiosus argues strongly that disulfide bond formation may be a significant molecular strategy for stabilizing intracellular hyperthermophilic proteins.     

Cloning, sequencing, and expression of the gene encoding amylopullulanase from Pyrococcus furiosus and biochemical characterization of the recombinant enzyme.

The gene encoding the Pyrococcus furiosus hyperthermophilic amylopullulanase (APU) was cloned, sequenced, and expressed in Escherichia coli. The gene encoded a single 827-residue polypeptide with a 26-residue signal peptide. The protein sequence had very low homology (17 to 21% identity) with other APUs and enzymes of the alpha-amylase family. In particular, none of the consensus regions present in the alpha-amylase family could be identified. P. furiosus APU showed similarity to three proteins, including the P. furiosus intracellular alpha-amylase and Dictyoglomus thermophilum alpha-amylase A. The mature protein had a molecular weight of 89,000. The recombinant P. furiosus APU remained folded after denaturation at temperatures of < or = 70 degrees C and showed an apparent molecular weight of 50,000 in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Denaturating temperatures of above 100 degrees C were required for complete unfolding. The enzyme was extremely thermostable, with an optimal activity at 105 degrees C and pH 5.5. Ca2+ increased the enzyme activity, thermostability, and substrate affinity. The enzyme was highly resistant to chemical denaturing reagents, and its activity increased up to twofold in the presence of surfactants.     

Acid activation of protyrosinase from Aspergillus oryzae: homo-tetrameric protyrosinase is converted to active dimers with an essential intersubunit disulfide bond at acidic pH

Aspergillus oryzae protyrosinase (pro-TY) has a unique feature that the proenzyme is activated under conditions of acidic pH. The pro-TY was inactive at pH 7.0. The latent enzyme was activated at pH 3.0, and was slightly activated by sodium dodecyl sulfate (SDS). The molecular masses of the pro-TY and acid-activated tyrosinase (acid-TY) were 266 and 165 kDa, respectively, as estimated by gel-filtration chromatography. The CD spectra showed that the tertiary and/or quaternary structure was changed after the acid activation. On the basis of these results, we deduce that the intersubunit polar interaction is disrupted at pH 3.0, and that the tetrameric pro-TY dissociates to dimers. Tryptophan fluorescence spectra and binding assay of 8-anilino-1-naphthalene sulfonic acid (ANS) suggested that hydrophobic amino acid residues of the active site were exposed to solvent after acid treatment. It was likely that Cys108 formed an intermolecular disulfide bond between the subunits of dimeric acid-TY. The dimerization of acid-TY involving the intermolecular disulfide bond is essential for the activity.     

Enhancing the thermal stability of avidin. Introduction of disulfide bridges between subunit interfaces

In this study we showed that tetrameric chicken avidin can be stabilized by introducing intermonomeric disulfide bridges between its subunits. These covalent bonds had no major effects on the biotin binding properties of the respective mutants. Moreover, one of the mutants (Avd-ccci) maintained its tetrameric integrity even in denaturing conditions. The new avidin forms Avd-ci and Avd-ccci, which have native --> denatured transition midpoints (T(m)) of 98.6 and 94.7 degrees C, respectively, in the absence of biotin, will find use in applications where extreme stability or minimal leakage of subunits is required. Furthermore, we showed that the intramonomeric disulfide bridges found in the wild-type avidin affect its stability. The mutant Avd-nc, in which this bridge was removed, had a lower T(m) in the absence of biotin than the wild-type avidin but showed comparable stability in the presence of biotin.