Identification and potential use of a molecular marker for rust resistance in common bean

Summary The Up ₂ gene of common bean (Phaseolus Vulgaris L.) is an important source of dominant genetic resistance to the bean rust pathogen [Uromyces appendiculatus (Pers. ex Pers.) Unger var appendiculatus [syn U. Phaseoli (Reben) Wint.]. Up ₂ in combination with other rust resistance genes may be used to obtain potentially stable genetic resistance. It is difficult, however, to combine rust resistance genes effective against a single race due to epistatic interactions that frequently occur between them. A strategy that employed bulked DNA samples formed separately from the DNA of three BC₆F₂ individuals with Up ₂ and three without Up ₂ as contrasting near-isogenic lines (NILs) was used to identify random amplified polymorphic DNA fragments (RAPDs) tightly linked to the Up ₂ locus. Only 1 of 931 fragments amplified by 167 10-mer primers of arbitrary sequence in the polymerase chain reaction (PCR) was polymorphic. The RAPD marker (OA14₁₁₀₀) amplified by the 5-TCTGTGCTGG-3 primer was repeatable and its presence and absence easy to score. No recombination was observed between OA14₁₁₀₀ and the dominant Up ₂ allele within a segregating BC₆F₂ population of 84 individuals. This result suggests that OA14₁₁₀₀ and Up ₂ are tightly linked. Andean and Mesoamerican bean germ plasm, with and without the Up ₂ allele, were assayed for the presence of OA14₁₁₀₀. Apparently, the marker is of Andean origin because all Andean lines, with or without the Up ₂ allele, contained the marker, and the marker was absent in all Mesoamerican germ plasm except the lines to which Up-2 had been purposely transferred. These results suggest that OA14₁₁₀₀ will be most useful for pyramiding Up ₂ with other rust resistance genes into germ plasm of Mesoamerican origin where the marker does not traditionally exist. The use of bulked DNA samples may have concentrated resources toward the identification of RAPDs that were tightly linked to the target locus. Marker-based selection may provide an alternative to the time-consuming testcrosses required to pyramid bean rust resistance genes that exhibit epistasis.Research supported by the Michigan Agricultural Research Station and the USDA-ARS. Mention of a trademark or proprietary product does not constitute a guarantee or warranty of the product by the USDA and does not imply its approval to the exclusion of other products that may also be suitable     

Identification of RAPD markers linked to a major rust resistance gene block in common bean

Rust in bean (Phaseolus vulgaris L.), caused byUromyces appendiculatus (Pers.) Unger var.appendiculatus [ =U. phaseoli (Reben) Wint.], is a major disease problem and production constraint in many parts of the world. The predominant form of genetic control of the pathogen is a series of major genes which necessitate the development of efficient selection strategies. Our objective was focused on the identification of RAPD (random amplified polymorphic DNA) markers linked to a major bean rust resistance gene block enabling marker-based selection and facilitating resistance gene pyramiding into susceptible bean germplasm. Using pooled DNA samples of genotyped individuals from two segregating populations, we identified two RAPD markers linked to the gene block of interest. One such RAPD, OF10₉₇₀ (generated by a 5-GGAAGCTTGG-3 decamer), was found to be closely linked (2.15±1.50 centi Morgans) in coupling with the resistance gene block. The other identified RAPD, OI19₄₆₀ (generated by a 5-AATGCGGGAG-3 decamer), was shown to be more tightly linked (also in coupling) than OF10₉₇₀ as no recombinants were detected among 97 BC₆F₂ segregating individuals in the mapping population. Analysis of a collection of resistant and susceptible cultivars and experimental lines, of both Mesoamerican and Andean origin, revealed that: (1) recombination between OF10₉₇₀ and the gene block has occurred as evidenced by the presence of the DNA fragment in several susceptible genotypes, (2) recombination between OI19₄₆₀ and the gene block has also occurred indicating that the marker is not located within the gene block itself, and (3) marker-facilitated selection using these RAPD markers, and another previously identified, will enable gene pyramiding in Andean germplasm and certain Mesoamerican bean races in which the resistance gene block does not traditionally exist. Observations of variable recombination among Mesoamerican bean races suggested suppression of recombination between introgressed segments and divergent recurrent backgrounds.Research supported by the Michigan Agricultural Research Station and the USDA-ARS. Mention of a trademark or a proprietary product does not constitute a guarantee or warranty of the product by the USDA and does not imply its approval to the exclusion of other products that may also be suitable     

Heterogeneous inbred populations are useful as sources of near-isogenic lines for RAPD marker localization

The development and use of RAPD markers for applications in crop improvement has recently generated considerable interest within the plant breeding community. One potential application of RAPDs is their use for tagging simply-inherited (monogenic) pest-resistance genes and enabling more efficient identification and selection of genotypes carrying specific combinations of resistance genes. In this report, we propose and describe the use of heterogeneous inbred populations as sources of near-isogenic lines (NILs) for targeting RAPD markers linked to major pest resistance genes. The development of these NILs for RAPD marker analyses involved a sequence of line and mass selection during successive generations of inbreeding. DNA bulks derived from the NILs were used to identify a RAPD marker (designated OK14₆₂₀, generated by 5-CCCGCTACAC-3 decamer) that was tightly linked (2.23±1.33 centiMorgans) to an important rust [Uromyces appendiculatus (Pers.) Unger var. appendiculatus] resistance gene (Ur-3) in common bean (Phaseolus vulgaris L.). The efficiency of this approach was demonstrated by a low rate of false-positives identified, the tightness of the linkage identified, and the ability to detect polymorphism between genomic regions that are representative of the same gene pool of common bean. This method of deriving NILs should find application by researchers interested in utilizing marker-assisted selection for one or more major pest resistance genes. The identification of OK14₆₂₀ should help to facilitate continued use of the Ur-3 resistance source and will now enable marker-assisted pyramiding of three different bean rust resistance sources (two previously tagged) to provide effective and stable resistance to this important pathogen.Research supported in part by the grant DAN 1310-G-SS-6008-00 from the USAID Bean/Cowpea Collaborative Research Support Program, the Michigan Agricultural Experiment Station, and the USDA-ARS. Mention of a trademark or a proprietary product does not constitute a guarantee or warranty of the product by the USDA and does not imply its approval to the exclusion of other products that may also be suitable     

Qualitative and quantitative characterization of RAPD variation among snap bean (Phaseolus vulgaris) genotypes

Ten snap bean (Phaseolus vulgaris) genotypes were screened for polymorphism with 400 RAPD (random amplified polymorphic DNA) primers. Polymorphic RAPDs were scored and classified into three categories based on ethidium bromide staining intensity. An average of 5.19 RAPD bands were scored per primer for the 364 primers that gave scorable amplification products. An average of 2.15 polymorphic RAPDs were detected per primer. The results show that primer screening may reduce the number of RAPD reactions required for the analysis of genetic relationships among snap-bean genotypes by over 60%. Based on the analysis of the distribution of RAPD amplification, the same number of polymorphic RAPDs were amplified from different genotypes for all RAPD band intensity levels. A comparison of RAPD band amplification frequency among genotypes for the three categories of bands classified by amplification strength revealed a measurable difference in the frequencies of RAPDs classified as faint (weakly amplifying) compared to RAPD bands classified as bold (strongly amplifying) indicating a possible scoring error due to the underscoring of faint bands. Correlation analysis showed that RAPD bands amplified by the same primer are not more closely correlated then RAPD bands amplified by different primers but are more highly correlated then expected by chance. Pairwise comparisons of RAPD bands indicate that the distribution of RAPD amplification among genotypes will be a useful criterion for establishing RAPD band identity. For the average pairwise comparison of genotypes, 50% of primers tested and 15.8% of all scored RAPDs detected polymorphism. Based on RAPD data Nei's average gene diversity at a locus was 0.158 based on all scorable RAPD bands and 0.388 if only polymorphic RAPD loci were considered. RAPD-derived 1 relationships among genotypes are reported for the ten genotypes included in this study. The data presented here demonstrate that many informative, polymorphic RAPDs can be found among snap bean cultivars. These RAPDs may be useful for the unique identification of bean varieties, the organization of bean germplasm, and applications of molecular markers to bean breeding.     

Inheritance of rapeseed (Brassica napus)-specific RAPD markers and a transgene in the cross B. juncea x (B. juncea x B. napus)

We have examined the inheritance of 20 rapeseed (Brassica napus)-specific RAPD (randomly amplified polymorphic DNA) markers from transgenic, herbicide-tolerant rapeseed in 54 plants of the BC₁ generation from the cross B. junceax(B. junceaxB. napus). Hybridization between B. juncea and B. napus, with B. juncea as the female parent, was successful both in controlled crosses and spontaneously in the field. The controlled backcrossing of selected hybrids to B. juncea, again with B. juncea as the female parent, also resulted in many seeds. The BC₁ plants contained from 0 to 20 of the rapeseed RAPD markers, and the frequency of inheritance of individual RAPD markers ranged from 19% to 93%. The transgene was found in 52% of the plants analyzed. Five synteny groups of RAPD markers were identified. In the hybrids pollen fertility was 0–28%. The hybrids with the highest pollen fertility were selected as male parents for backcrossing, and pollen fertility in the BC₁ plants was improved (24–90%) compared to that of the hybrids.     

Control of the bean rust fungus <Emphasis Type="Italic">Uromyces appendiculatus</Emphasis> by means of <Emphasis Type="Italic">Trichoderma harzianum</Emphasis>: leaf disc assays on the antibiotic effect of spore suspensions and culture filtrates

Several species of the fungal genus Trichoderma act as antagonists of other fungi. A number of strains from the Trichoderma species T. harzianum Rifai are used as biological control agents for the control of soilborne as well as foliar plant pathogens. Six T. harzianum strains, five of them isolated from commercial preparations, were evaluated for their capability to control the bean rust fungus Uromyces appendiculatus (Pers. ex Pers.) Unger. Different kinds of leaf disc assays were performed with conidial spore suspensions and sterile culture filtrates of the T. harzianum strains. Great differences were observed concerning the efficacy of the Trichoderma strains to reduce the number of the uredial pustules developing after rust inoculation which followed the application of the particular Trichoderma strains. Efficacy values ranged from 1 to over 50%. Increasing spore or culture filtrate concentrations of the two most effective isolates T12 and T_U led to decreases in the number of developing uredial pustules. Culture filtrate applications had a protective but no curative effect. T12 spore suspensions maintained their disease reducing activity even when autoclaved. This and some other evidence for an antibiotic interaction between T. harzianum and U. appendiculatus are discussed. Handling Editor: Reijo Karjalainen.     

Transfer of bacterial blight and blast resistance from the tetraploid wild rice Oryza minuta to cultivated rice,Oryza sativa

Summary Oryza minuta J. S. Presl ex C. B. Presl is a tetraploid wild rice with resistance to several insects and diseases, including blast (caused by Pyricularia grisea) and bacterial blight (caused by Xanthomonas oryzae pv. oryzae). To transfer resistance from the wild species into the genome of cultivated rice (Oryza sativa L.), backcross progeny (BC₁, BC₂, and BC₃) were produced from interspecific hybrids of O. sativa cv IR31917-45-3-2 (2n=24, AA genome) and O. minuta Acc. 101141 (2n=48, BBCC genomes) by backcrossing to the O. sativa parent followed by embryo rescue. The chromosome numbers ranged from 44 to 47 in the BC₁ progeny and from 24 to 37 in the BC₂ progeny. All F₁ hybrids were resistant to both blast and bacterial blight. One BC₁ plant was moderately susceptible to blast while the rest were resistant. Thirteen of the 16 BC₂ progeny tested were resistant to blast; 1 blast-resistant BC₂, plant 75-1, had 24 chromosomes. A 3 resistant: 1 susceptible segregation ratio, consistent with the action of a major, dominant gene, was observed in the BC₂F₂ and BC₂F₃ generations. Five of the BC₁ plants tested were resistant to bacterial blight. Ten of the 21 BC₂ progeny tested were resistant to Philippine races 2, 3, and 6 of the bacterial blight pathogen. One resistant BC₂, plant 78-1, had 24 chromosomes. The segregation of reactions of the BC₂F₂, BC₂F₃, and BC₂F₄ progenies of plant 78-1 suggested that the same or closely linked gene(s) conferred resistance to races 2, 3, 5, and 6 of the bacterial blight pathogen from the Philippines.     

The association between pollen size and Renner complex in Oenothera villaricae and O. picensis ssp. picensis and their hybrids: evidence for preanthesis pollen competition

In both Oenothera villaricae Dietrich and O. picensis ssp. picensis, chromosomes are transmitted as two Renner complexes. Reciprocal combinations of the Renner complexes produce eight different F₁ hybrids, but only seven are viable. Each species, and each F₁ hybrid, produces three sizes of pollen, approximately 50% small sterile grains, 15% medium-sized viable grains and 35% large viable grains. Medium- and large-sized grains were separated manually and subjected to random amplified polymorphic DNAs (RAPDs) analysis. A pattern of RAPD amplifications was obtained which indicates that, for each species and F₁ hybrid, one specific Renner complex characterizes the medium- and another the large-sized viable pollen. The results indicate that pollen size is determined in part by the pollen genotype and in part by the genotype of the other pollen grains developing within the same anther.     

Inheritance of resistance to the two-spotted spider mite from L. pimpinellifolium (Jusl.) Mill. accession ‘TO-937’

The two-spotted spider mite (Tetranychus urticae Koch) is an important pest of tomato (Lycopersicon esculentum Mill.) crops in temperate regions as this spider mite has a very large capacity for population increase and causes severe tomato yield losses. There is no described tomato cultivar fully resistant to this pest, although resistant accessions have been reported within the green-fruited tomato wild species L. pennellii (Corr.) D’Arcy and L. hirsutum Humb. & Bonpl. We observed a L. pimpinellifolium (Jusl.) Mill. accession, ‘TO-937’, which seemed to be completely resistant to mite attacks and we crossed it with the susceptible L. esculentum cultivar. ‘Moneymaker’ to obtain a family of generations consisting of the two parents, the F₁, the F₂, the BC₁ to L. esculentum, and the BC₁ to L. pimpinellifolium. This family was evaluated for mite resistance in a polyethylene greenhouse using an experimental design in 60 small complete blocks distributed along 12 double rows. Each block consisted of five F₂ plants in one row and one plant of each of the two parents, the F₁, the BC₁ to L. esculentum, and the BC₁ to L. pimpinellifolium in the adjacent row. Plants at the 10–15 leaf stage were artificially infested by putting on them two pieces of French bean leaf heavily infested with T. urticae. After two months, evaluations of infestation were made by visual observation of mite nets and leaf damage. Plants that were free of signs of mite reproduction on the top half were considered as resistant, plants with silky nets only on their basal leaves, intermediate, and plants with mite reproduction on both basal and top canopies were scored as susceptible. Dominance for resistance appeared because all the ‘To-937’, BC₁ to L. pimpinellifolium, and F₁ plants were resistant. Not all ‘Moneymaker’ plants behaved as susceptible because 35% of plants were intermediate. In the BC₁ to L. pimpinellifolium and the F₂, most plants were scored as resistant, only 7 % BC₁ and 3 % F₂ plants were intermediate, and a single F₂ plant (0.3 %) was susceptible. With these figures, resistance seemed to be controlled by either four or two genes according to whether segregation in the BC₁ or in the F₂, respectively, were considered. These results could in part be explained because of appearance of negative interplot interference due to the high frequency of resistant genotypes within most of the generations. Therefore, the family was evaluated again but using a different experimental design. In the new experiment, 16 ‘TO-937’, 17 ‘Moneymaker’, 17 F₁, 37 BC₁ to L. pimpinellifolium, 38 BC₁ to L. esculentum, and 125 F₂ plants were included. Each of these test plants was grown besides a susceptible ‘Moneymaker’ auxilliary plant that served to keep mite population high and homogeneous in the greenhouse. Negative interplot interference was avoided with this design and all the ‘TO-937’, F₁, and BC₁ to L. pimpinellifolium plants were resistant, all ‘Moneymaker’ test plants were susceptible, and 52 % BC₁ to L. esculentum and 25 % F₂ plants were susceptible, which fitted very well with the expected for resistance governed by a single dominant gene. The simple inheritance mode found will favour sucessful introgression of mite resistance into commercial tomatoes from the very close relative L. pimpinellifolium.     

Genetic analysis of RFLPs, GATA microsatellites and RAPDs in a cross between L. esculentum and L. pimpinellifolium

A population of 257 BC₁ plants was developed from a cross between an elite processing line of tomato (Lycopersicon esculentum cvM82-1-7) and the closely related wild species L. pimpinellifolium (LA1589). The population was used to construct a genetic linkage map suitable for quantitative trait locus (QTL) analysis to be conducted in different backcross generations. The map comprises 115 RFLP, 3 RAPD and 2 morphological markers that span 1279 cM of the tomato genome with an average distance between markers of 10.7 cM. This map is comparable in length to that of the highdensity RFLP map derived from a L. esculentum x L. pennellii F₂ population. The order of the markers in the two maps is also in good agreement, however there are considerable differences in the distribution of recombination along the chromosomes. The segregation of six GATA-containing loci and 47 RAPD markers was also analyzed in subsets of the population. All of the microsatellite loci and 35 (75%) of the RAPDs mapped to clusters associated with centromeric regions.     

Characterization and mapping of <Emphasis Type="Italic">Rpi1</Emphasis>, a gene that confers dominant resistance to stalk rot in maize

The maize inbred lines 1145 (resistant) and Y331 (susceptible), and the F₁, F₂ and BC₁F₁ populations derived from them were inoculated with the pathogen Pythium inflatum Matthews, which causes stalk rot in Zea mays. Field data revealed that the ratio of resistant to susceptible plants was 3:1 in the F₂ population, and 1:1 in the BC₁F₁population, indicating that the resistance to P. inflatum Matthews was controlled by a single dominant gene in the 1145×Y331 cross. The gene that confers resistance to P. inflatum Matthews was designated Rpi1 for resistance to P. inflatum) according to the standard nomenclature for plant disease resistance genes. Fifty SSR markers from 10 chromosomes were first screened in the F₂ population to find markers linked to the Rpi1 gene. The results indicated that umc1702 and mmc0371 were both linked to Rpi1, placing the resistance gene on chromosome 4. RAPD (randomly amplified polymorphic DNA) markers were then tested in the F₂population using bulked segregant analysis (BSA). Four RAPD products were found to show linkage to the Rpi1 gene. Then 27 SSR markers and 8 RFLP markers in the region encompassing Rpi1 were used for fine-scale mapping of the resistance gene. Two SSR markers and four RFLP markers were linked to the Rpi1 gene. Finally, the Rpi1 gene was mapped between the SSR markers bnlg1937 and agrr286 on chromosome 4, 1.6 cM away from the former and 4.1 cM distant from the latter. This is the first time that a dominant gene for resistance to maize stalk rot caused by P. inflatum Matthews has been mapped with molecular marker techniques.     

Random-amplified-polymorphic DNA markers in sorghum

Conditions have been identified that allow reproducible amplification of RAPD markers in sorghum. High resolution of RAPD markers was accomplished by radiolabeling PCR-amplified DNAs followed by separation on denaturing 5% polyacrylamide gels. Reaction parameters including MgCl₂ concentration and temperature significantly influenced yield and the type of amplification products synthesized. Unexplained amplified DNAs increased when more than 35 cycles of PCR amplification were used. Under standard conditions, approximately 80% of the primers tested amplified DNA, and most revealed 1–5 polymorphisms between BTx 623 and IS 3620C. Primers were used to amplify RAPDs in 32 genotypes of sorghum. In addition, 8 primers detected RAPDs in a population previously used to create an RFLP map for sorghum. These RAPDs were mapped successfully using a population of 50 F₂ plants.     

A genetic linkage map of azuki bean constructed with molecular and morphological markers using an interspecific population (Vigna angularis x V. nakashimae)

A genetic linkage map of azuki bean (Vigna angularis) was constructed with molecular and morphological markers using an F₂ population of an interspecific cross between azuki bean and its wild relative, V. nakashimae. In total, 132 markers (108 RAPD, 19 RFLP and five morphological markers) were mapped in 14 linkage groups covering 1250 cM; ten remained unlinked. The clusters of markers showing distorted segregation were found in linkage groups 2, 8 and 12. By comparing the azuki linkage map with those of mungbean and cowpea, using 20 RFLP common markers, some sets of the markers were found to belong to the same linkage groups of the respective maps, indicating that these linkage blocks are conserved among the three Vigna species. This map provides a tool for markerassisted selection and for studies of genome organization in Vigna species.     

Filipin-sterol complexes in bean rust- and oat crown rust-fungal/plant interactions: Freeze-etch electron microscopy

Summary Treatment with the polyene antibiotic filipin resulted in the formation of granular protuberances of the plasmamembranes of the mesophyll cells of bean (Phaseolus vulgaris) and oat (Avena sativa) plants, and of intercellular hyphal cells of the rust fungiUromyces appendiculatus var.appendiculatus andPuccinia coronata var.avenae, as seen by freeze-etch electron microscopy. The granules were also occasionally seen in intracellular vesicles ofU. appendiculatus. None were found in any intracellular organelles of plant or fungal tissue. The granules ranged in size from about 20–25 nm in the plant tissue and 21–27 nm in the fungal tissue. They were concluded to be filipin-sterol (FS) complexes. The extrahaustorial membranes of either bean or oat rustinfected tissue were generally devoid of FS complexes. The extrahaustorial membrane is continuous with the host plasmamembrane but appeared to have a lower sterol content as compared to the non-invaginated plasmamembrane. The results are discussed in relation to membrane associations at the host-parasite interface.Contribution No. 1011. Winnipeg Research Stn.     

DNA fingerprinting of Peronospora parasitica,a biotrophic fungal pathogen of crucifers

The fungus Peronospora parasitica (Pers. ex Fr.) Fr. is an obligate biotroph infecting a wide range of host species in the family Cruciferae. Isolates from different hosts are morphologically similar, and pathotypes are usually distinguished on the basis of host range. Random Amplified Polymorphic DNA (RAPD) fingerprints were generated from a range of P. parasitica isolates from different Brassica species. Reaction conditions, in particular DNA template, primer and Mg²⁺ concentrations, were optimized to ensure that amplifications were reproducible. Possible artefacts arising through host plant DNA were assessed by including such DNA in control reactions. Confirmation that diagnostic RAPD bands were generated from fungal DNA was also obtained by Southern hybridization of a RAPD band to genomic fungal DNA. By screening 20 decamer primers, 2 were found to detect sufficient genetic variation to allow complete differentiation between pathotypes. These results illustrate the potential value of RAPDs for detecting polymorphisms between isolates of a non-culturable plant pathogenic fungus.     

Expression of Thinopyrum distichum NORs in wheat×Thinopyrum amphiploids and their backcross generations

Summary The C-banding pattern of the satellited chromosomes in Thinopyrum distichum and Triticum durum was established. Both T. durum and Th. distichum contained two pairs of satellited chromosomes, which could be distinguished from one another. In the amphiploids [T. durum×Th. distichum (2x=56)] and in the backcross T. durum/(T. durum×Th. distichum)², BC₁F₃, and BC₁F₅ (2n = 42) the satellite was visible on only 1B and 6B of T. durum. The vector pTa 71 containing the rRNA gene from wheat hybridized to two pairs of chromosomes (four hybridization sites) in T. durum and Th. distichum, to eight sites in the amphiploid hybrid (2n=56), and to six sites in the backcross populations BC₁F₁. BC₁F₃, and BC₁F₅ (2n=42). The two satellite pairs in Th. distichum could be distinguished by the chromosomal location of the rRNA site (median or subterminal) and by the centromere position. One copy of each pair was present in the BC₁F₁, but in the BC₁F₃ and BC₁F₅ populations the pair with the subterminal location of rRNA genes was absent. Silver nitrate staining indicated that the rRNA genes of T. durum did not completely suppress those of Th. distichum. The octoploid amphiploid (2n = 56) contained a maximum of four large and four small nucleoli and the hexaploid BC₁s (2n=42), four large and two small nucleoli.     

Identification of two RAPD markers tightly linked with the Nicotiana debneyi gene for resistance to black root rot of tobacco

Linkage of randomly amplified polymorphic DNA (RAPD) markers with a single dominant gene for resistance to black root rot (Chalara elegans Nag Raj and Kendrick; Syn. Thielaviopsis basicola [Berk. and Broome] Ferraris) of tobacco (Nicotiana tabacum L.), which was transferred from N. debneyi Domin, was investigated in this study. There were 2594 repeatable RAPD fragments generated by 441 primers on DNAs of Delgold tobacco, a BC₅F₈ near isogenic line (NIL) carrying the resistance gene in a Delgold background, and PB19, the donor parent of the resistance gene. Only 7 of these primers produced eight RAPD markers polymorphic between Delgold and PB19, indicating there are few RAPD polymorphisms between them despite relatively dissimilar pedigrees. Five of the eight RAPD markers were not polymorphic between Delgold and the NIL. All of these markers proved to be unlinked with the resistance gene in F₂ linkage tests. Of the remaining three RAPD markers polymorphic between Delgold and the NIL, two were shown to be strongly linked with the resistance gene; one in coupling and the other in repulsion. Application of the two RAPDs in the elimination of linkage drag associated with the N. debneyi resistance gene and marker-assisted selection for the breeding of new tobacco cultivars with the resistance gene is discussed.     

Additive transgene expression and genetic introgression in multiple green-fluorescent protein transgenic crop × weed hybrid generations

The level of transgene expression in crop × weed hybrids and the degree to which crop-specific genes are integrated into hybrid populations are important factors in assessing the potential ecological and agricultural risks of gene flow associated with genetic engineering. The average transgene zygosity and genetic structure of transgenic hybrid populations change with the progression of generations, and the green fluorescent protein (GFP) transgene is an ideal marker to quantify transgene expression in advancing populations. The homozygous T₁ single-locus insert GFP/Bacillus thuringiensis (Bt) transgenic canola (Brassica napus, cv Westar) with two copies of the transgene fluoresced twice as much as hemizygous individuals with only one copy of the transgene. These data indicate that the expression of the GFP gene was additive, and fluorescence could be used to determine zygosity status. Several hybrid generations (BC₁F₁, BC₂F₁) were produced by backcrossing various GFP/Bt transgenic canola (B. napus, cv Westar) and birdseed rape (Brassica rapa) hybrid generations onto B. rapa. Intercrossed generations (BC₂F₂ Bulk) were generated by crossing BC₂F₁ individuals in the presence of a pollinating insect (Musca domestica L.). The ploidy of plants in the BC₂F₂ Bulk hybrid generation was identical to the weedy parental species, B. rapa. AFLP analysis was used to quantify the degree of B. napus introgression into multiple backcross hybrid generations with B. rapa. The F₁ hybrid generations contained 95–97% of the B. napus-specific AFLP markers, and each successive backcross generation demonstrated a reduction of markers resulting in the 15–29% presence in the BC₂F₂ Bulk population. Average fluorescence of each successive hybrid generation was analyzed, and homozygous canola lines and hybrid populations that contained individuals homozygous for GFP (BC₂F₂ Bulk) demonstrated significantly higher fluorescence than hemizygous hybrid generations (F₁, BC₁F₁ and BC₂F₁). These data demonstrate that the formation of homozygous individuals within hybrid populations increases the average level of transgene expression as generations progress. This phenomenon must be considered in the development of risk-management strategies.Communicated by J. Dvorak     

Molecular genetics of growth and development in Populus. III. A genetic linkage map of a hybrid poplar composed of RFLP,STS, and RAPD markers

We have evaluated three DNA-based marker types for linkage map construction in Populus: RFLPs detected by Southern blot hybridization, STSs detected by a combination of PCR and RFLP analysis, and RAPDs. The mapping pedigree consists of three generations, with the F₁ produced by interspecific hybridization between a P. trichocarpa female and a P. deltoides male. The F₂ generation was made by inbreeding to the maximum degree permitted by the dioecious mating system of Populus. The applicability of STSs and RAPDs outside the mapping pedigree has been investigated, showing that these PCR-based marker systems are well-suited to breeding designs involving interspecific hybridization. A Populus genome map (343 markers) has been constructed from a combination of all three types. The length of the Populus genome is estimated to be 2400–2800 cM.Abbreviations RFLP restriction fragment length polymorphism - STS sequence-tagged site - PCR polymerase chain reaction - RAPD random amplified polymorphic DNA     

Inheritance of seed weight in Cucumis sativus (L.) var. sativus and var. hardwickii (Royle) Kitamura

Summary A series of experiments was conducted to determine the inheritance of seed weight in cucumber. Matings between a Cucumis sativus var. sativus (Cs) L. inbred line (USDA WI 1606; P₁) and a C. sativus var. hardwickii (Royle) Kitamura (Ch) collection (PI 215589; P₂) were made to produce seed of reciprocal F₁, F₂, and BC₁ families. Families were grown under field and greenhouse conditions, and seeds were extracted from fruit 55 to 60 days post-pollination. Seed of F₁ and F₂ families was obtained using the Cs inbred WI2808 (P₁₂) and the Ch collection LJ 90430 (P₁₀), and seed of F₁ families were produced using a North Carolina Design II mating scheme in which three Cs (P₃= GY-14; P₄=WI 1379; P₅=WI 1909) inbreds were used as maternal parents and seven Ch collections (P₂; P₆= PI462369; P₇=486336; P₈=LJ91176; P₉=273469; P₁₀= 2590430; P₁₁=PI187367) were used as paternal parents. Mean seed weights of F₁ progeny reflected the dominance of genes of the C. sativus var. sativus parent. Transformation to number of seeds per unit weight resulted in increased variance homogeneity within generations and a broad-sense heritability ranging between 26% to 56%. Additive and dominance effects were important in the expression of seed weight in P₁×P₂ progeny produced in the greenhouse and additive effects were important in field grown progeny resulting from P₁×P₂ and P₁₀×P₁₂ matings. The estimated number of factors or loci involved ranged between 10 to 13, depending on the method of calculation.