The effect of cyclodextrins on the ethanol tolerance of microorganisms suggests potential application

Cyclodextrins (CDs) are used in food, pharmaceutical, and chemical industries, as well as agriculture and environmental engineering. Cyclodextrin glucanotransferase (CGTase) is an important industrial extracellular enzyme which is used to produce CDs and oligosaccharides. We previously developed a novel yeast-surface CGTase expression system which was used for the production of CDs from starch. In the present study, we showed that the presence of CDs may increase the ethanol tolerance of microorganisms. The cell numbers of Saccharomyces cerevisiae and Escherichia coli in the presence of β-cyclodextrin and ethanol were 1,000-fold and 10-fold higher than that without CDs. The yeast strain with the immobilized CGTase produced 13 g CDs/l and 1.8 g ethanol/l when it was incubated in yeast medium supplemented with 4% starch. The effect of CDs on microorganisms suggests a potential application for the co-production of CDs and ethanol.     

Sequencing,cloning, and heterologous expression of cyclomaltodextrin glucanotransferase of Bacillus firmus strain 37 in Bacillus subtilis WB800

Bacillusfirmus strain 37 produces the cyclomaltodextrin glucanotransferase (CGTase) enzyme and CGTase produces cyclodextrins (CDs) through a starch cyclization reaction. The strategy for the cloning and expression of recombinant CGTase is a potentially viable alternative for the economically viable production of CGTase for use in industrial processes. The present study used Bacillus subtilis WB800 as a bacterial expression host for the production of recombinant CGTase cloned from the CGTase gene of B. firmus strain 37. The CGTase gene was cloned in TOPO-TA^® plasmid, which was transformed in Escherichia coli DH5α. The subcloning was carried out with pWB980 plasmid and transformation in B. subtilis WB800. The 2xYT medium was the most suitable for the production of recombinant CGTase. The enzymatic activity of the crude extract of the recombinant CGTase of B. subtilis WB800 was 1.33 µmol β-CD/min/mL, or 7.4 times greater than the enzymatic activity of the crude extract of CGTase obtained from the wild strain. Following purification, the recombinant CGTase exhibited an enzymatic activity of 157.78 µmol β-CD/min/mL, while the activity of the CGTase from the wild strain was 9.54 µmol β-CD/min/mL. When optimal CDs production conditions for the CGTase from B. firmus strain 37 were used, it was observed that the catalytic properties of the CGTase enzymes were equivalent. The strategy for the cloning and expression of CGTase in B. subtilis WB800 was efficient, with the production of greater quantities of CGTase than with the wild strain, offering essential data for the large-scale production of the recombinant enzyme.

     

Purification and properties of a novel raw starch degrading cyclomaltodextrin glucanotransferase from Bacillus firmus

A novel raw starch degrading cyclomaltodextrin glucanotransferase (CGTase; E.C. 2.4.1.19), produced by Bacillus firmus, was purified to homogeneity by ultrafiltration, affinity and gel filtration chromatography. The molecular weight of the pure protein was estimated to be 78 000 and 82 000 Da, by SDS-PAGE and gel filtration, respectively. The pure enzyme had a pH optimum in the range 5.5–8.5. It was stable over the pH range 7–11 at 10 °C, and at pH 7.0 at 60 °C. The optimum temperature for enzyme activity was 65 °C. In the absence of substrate, the enzyme rapidly lost its activity above 30 °C. K _m and k _cat for the pure enzyme were 1.21 mg/ml and 145.17 μM/mg per minute respectively, with soluble starch as the substrate. For cyclodextrin production, tapioca starch was the best substrate used when gelatinized, while wheat starch was the best substrate used when raw. This CGTase could degrade raw wheat starch very efficiently; up to 50% conversion to cyclodextrins was obtained from 150 g/l starch without using any additives. The enzyme produced α-, β- and γ-cyclodextrins in the ratio of 0.2:9.2:0.6 and 0.2:8.6:1.2 from gelatinized tapioca starch and raw wheat starch with 150 g/l concentration respectively, after 18 h incubation. Received: 25 September 1998 / Received revision: 15 December 1998 / Accepted: 21 December 1998     

Cyclodextrin glycosyltransferase from Bacillus circulans DF 9R: Activity and kinetic studies

Activity characteristics and kinetic aspects of a cyclodextrin glycosyltransferase (CGTase) from Bacillus circulans DF 9R were studied. A mixture of α-, β- and γ-cyclodextrins (CDs), glucose, maltose and negligible amounts of longer linear dextrins were produced from gelatinized amylose, amylopectin and starch from different sources. In the coupling reaction, CDs were the substrates in the presence of acceptors such as maltose and/or longer oligosaccharides. From oligosaccharides formed by three or more glucose units, this enzyme produced linear chains of several lengths which were then cyclized. CGTase catalytic efficiency was compared employing an analytical grade starch and cassava starch for food use. Since the results obtained were similar for both starches, the use of an economic starch is an advantage. CGTase was inhibited by the substrate and its own products. Starch concentrations over 20 mg/mL inhibited the cyclizing activity. CDs behaved as competitive inhibitors and maltose as an uncompetitive inhibitor while maltotriose showed a mixed inhibition pattern. Limit dextrins showed a scarce inhibitory effect on enzyme activity. CD production could be improved with an ultrafiltration membrane reactor for continuous removal of the products; the starch concentration should be maintained below an inhibitory concentration and limit dextrins would remain in the reactor without affecting enzyme activity.     

Cyclodextrin glucanotransferase (CGTase) catalyzed synthesis of dodecyl glucooligosides by transglycosylation using α-cyclodextrin or starch

Dodecyl glucooligosides, a class of interesting non ionic surfactant molecules were synthesized by cyclodextrin glucanotransferase from Bacillus macerans using either α-cyclodextrin (α-CD) or soluble starch as glycosyl donor and dodecyl β-d-glucoside (C₁₂G₁) or dodecyl β-d-maltoside (C₁₂G₂) as acceptor substrates. The primary coupling products obtained in the respective reactions were identified as dodecyl glucoheptaoside and dodecyl maltooctaoside by mass spectrometry. Higher yields of coupling products were obtained using α-CD as donor, while more dispoportionation occurred with starch. Nearly 78% conversion of the acceptor substrate C₁₂G₁ into dodecyl glucooligosides could be achieved at 132 μg/ml of CGTase in 20 min, while 93% of C₁₂G₂ could be transformed into products at 17.6 μg/ml of enzyme in 120 min using soluble starch as donor substrate. For applications requiring pure compounds like C₁₂G₇, synthesis using α-CD is advantageous. However, for applications in which a mixture of elongated alkyl glycosides is needed, reactions employing starch are clearly competitive.     

Optimisation of batch culture conditions for cyclodextrin glucanotransferase production from Bacillus circulans DF 9R

Background  

The extracellular enzyme cyclodextrin glucanotransferase (CGTase) synthesizes cyclic malto-oligosaccharides called cyclodextrins (CDs) from starch and related α-1,4-glucans. CGTases are produced by a variety of bacteria, mainly Bacillus species, by submerged culture in complex medium. CGTases differ in the amount and types of CDs produced. In addition, CGTase production is highly dependent on the strain, medium composition and culture conditions. Therefore we undertook this study with a newly isolated strain of Bacillus circulans.     

Organic solvent and pH induced alteration of product specificity of CGTase

Cyclodextrin glucanotransferase [CGTase, E.C.2.4.1.19] is an extracellular enzyme, which catalyzes the formation of α−, β−, γ− CDs from starch. Their proportions of formations depend on enzyme sources and reaction conditions. To understand what determines the product specificity of CGTases, we examined the alteration of product specificity of CGTase fromBacillus macerans by organic solvents and pH. At acidic pH range less than pH 6 where the enzyme was unstable, the ratio of α−/β-CD production was increased 4 times more than that at neutral pH range. As we increased the concentration of 2-butanol, α−/β-CD ratio was proportionally increased but/ratio remained constant. The α−/β-CD ratio of products was increased in the reaction media which yielded low products.     

Carbohydrate-Binding Module–Cyclodextrin Glycosyltransferase Fusion Enables Efficient Synthesis of 2-O-d-Glucopyranosyl-l-Ascorbic Acid with Soluble Starch as the Glycosyl Donor

In this study, we achieved the efficient synthesis of 2-O-d-glucopyranosyl-l-ascorbic acid (AA-2G) from soluble starch by fusing a carbohydrate-binding module (CBM) from Alkalimonas amylolytica α-amylase (CBM_Amy) to cyclodextrin glycosyltransferase (CGTase) from Paenibacillus macerans. One fusion enzyme, CGT-CBM_Amy, was constructed by fusing the CBM_Amy to the C-terminal region of CGTase, and the other fusion enzyme, CGTΔE-CBM_Amy, was obtained by replacing the E domain of CGTase with CBM_Amy. The two fusion enzymes were then used to synthesize AA-2G from soluble starch as a cheap and easily soluble glycosyl donor. Under the optimal conditions, the AA-2G yields produced using CGTΔE-CBM_Amy and CGT-CBM_Amy were 2.01 g/liter and 3.03 g/liter, respectively, which were 3.94- and 5.94-fold of the yield from the wild-type CGTase (0.51 g/liter). The reaction kinetics of the two fusion enzymes were analyzed and modeled to confirm the enhanced specificity toward soluble starch. It was also found that, compared to the wild-type CGTase, the two fusion enzymes had relatively high hydrolysis and disproportionation activities, factors that favor AA-2G synthesis. Finally, it was speculated that the enhancement of soluble starch specificity may be related to the changes of substrate binding ability and the substrate binding sites between the CBM and the starch granule.     

Molecular cloning and characterization of a novel γ-CGTase from alkalophilic Bacillus sp.

We found a novel cyclodextrin glucanotransferase (CGTase) from alkalophilic Bacillus sp. G-825-6. The enzyme was expressed in the culture broth by recombinant Bacillus subtilis KN2 and was purified and characterized. The enzyme named CGTase825-6 showed 95% amino acid sequence identity with a known enzyme β-/γ-CGTase from Bacillus firmus/lentus 290-3. However, the product specificity of CGTase825-6 differed from that of β-/γ-CGTase. CGTase825-6 produced γ-cyclodextrin (CD) as the main product, but degradation of γ-CD was observed with prolonged reaction. The product specificity of the enzyme was positioned between γ-CGTase produced by Bacillus clarkii 7364 and B. firmus/lentus 290-3 β-/γ-CGTase. It showed that the difference of product specificity was dependent on only 28 amino acid residues in 671 residues in CGTase825-6. We compared the amino acid sequence of CGTase825-6 and those of other CGTases and constructed a protein structure model of CGTase825-6. The comparison suggested that the diminished loop (Val138-Asp142) should provide subsite -8 for γ-CD production and that Asp142 might have an important role in product specificity. CGTase825-6 should be a useful tool to produce γ-CD and to study the differences of producing mechanisms between γ-CD and β-CD.     

Immobilization of cyclodextrin glucanotransferase on amberlite IRA-900 for biosynthesis of transglycosylated xylitol

Cyclodextrin glucanotransferase (CGTase) fromThermoanaerobacter sp. was adsorbed on the ion exchange resin Amberlite IRA-900. The optimum conditions for the immobilization of the CGTase were pH 6.0 and 600 U CGTase/g resin, and the maximum yield of immobilization was around 63% on the basis of the amount ratio of the adsorbed enzyme to the initial amount in the solution. Immobilization of CGTase shifted the optimum temperature for the enzyme to produce transglycosylated xylitol from 70°C to 90°C and improved the thermal stability of immobilized CGTase, especially after the addition of soluble starch and calcium ions. Transglycosylated xylitol was continuously produced using immobilized CGTase in the column type packed bed reactor, and the operating conditions for maximum yield were 10% (w/v) dextrin (13 of the dextrose equivalent) as the glycosyl donor, 10% (w/v) xylitol as the glycosyl acceptor, 20 mL/h of medium flow rate, and 60°C. The maximum yield of transglycosylated xylitol and productivity were 25% and 7.82 g·L⁻¹·h⁻¹, respectively. The half-life of the immobilized CGTase in a column type packed bed reactor was longer than 30 days.     

Production of cyclodextrin glucanotransferase from an alkalophilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. by pH-stat fed-batch fermentation

Batch and fed-batch fermentation processes were employed to culture an alkalophilic Bacillus sp. for the production of cyclodextrin glucanotransferase (CGTase). CGTase production was repressed by glucose and induced by soluble starch. By fed-batch fermentation, a CGTase activity up to 56 unit ml⁻¹ with 65 g dry cells l⁻¹ were achieved. The CGTase activity and cell density were increased 360 and 510%, respectively, from those values achieved with batch fermentation.     

Production of cyclodextrin glycosyltransferase by alkaliphilic <Emphasis Type="Italic">Bacillus circulans</Emphasis> in submerged and solid-state cultivation

Cyclodextrin glycosyltransferase (CGTase; E.C. 2.4.1.19) is an industrially important enzyme, which is used to produce cyclodextrins (CDs). In this research, we report the use of experimental factorial design to find the best conditions of pH and temperature for CGTase production by Bacillus circulans var. alkalophilus. The optimized calculated values for the tested variables were, respectively, pH 9.7 and temperature 36^oC, with a CGTase activity of 615 U mL⁻¹. The CGTase production was further studied with the optimized process parameters on submerged cultivations (SC) and solid-state cultivations (SSC) using soybean industrial fibrous residue (SIFR). The maximum CGTase activity obtained on SC was 1,155 U mL⁻¹ under aerobic conditions. Cell growth and CGTase synthesis in SSC using SIFR as substrate was excellent, with CGTase activity of 32,776 U g_(SIFR) ⁻¹. These results strongly support the use of SIFR for CGTase production since it is a non-expensive residue.     

Cloning,extracellular expression and characterization of a predominant β-CGTase from <Emphasis Type="Italic">Bacillus</Emphasis> sp. G1 in <Emphasis Type="Italic">E. coli</Emphasis>

The cyclodextrin glucanotransferase (CGTase, EC 2.4.1.19) gene from Bacillus sp. G1 was successfully isolated and cloned into Escherichia coli. Analysis of the nucleotide sequence revealed the presence of an open reading frame of 2,109 bp and encoded a 674 amino acid protein. Purified CGTase exhibited a molecular weight of 75 kDa and had optimum activity at pH 6 and 60°C. Heterologous recombinant protein expression in E. coli is commonly problematic causing intracellular localization and formation of inactive inclusion bodies. This paper shows that the majority of CGTase was secreted into the medium due to the signal peptide of Bacillus sp. G1 that also works well in E. coli, leading to easier purification steps. When reacted with starch, CGTase G1 produced 90% β-cyclodextrin (CD) and 10% γ-CD. This enzyme also preferred the economical tapioca starch as a substrate, based on kinetics studies. Therefore, CGTase G1 could potentially serve as an industrial enzyme for the production of β-CD.     

Europium-linked Immunoassay of IgM Production by Human–Human Hybridomas Cultured with or without Chicken Egg-yolk Lipoprotein

The reaction conditions for γ-CD production by a purified CGTase from Brevibacterium sp. No. 9605 were investigated. The optimum pH and temperature for γ-CD formation were 7.0 and 50°C, respectively. The addition of calcium ion increased heat stability of the CGTase and the CDs formation was affected by the concentration of calcium ion. In the presence of ethanol, the yield of γ-CD from soluble starch was increased.     

Purification and properties of a novel raw starch degrading-cyclodextrin glycosyltransferase from Klebsiella pneumoniae AS- 22

A novel raw starch degrading α-cyclodextrin glycosyltransferase (CGTase; E.C. 2.4.1.19), produced by Klebsiella pneumoniae AS-22, was purified to homogeneity by ultrafiltration, affinity and gel filtration chromatography. The specific cyclization activity of the pure enzyme preparation was 523 U/mg of protein. No hydrolysis activity was detected when soluble starch was used as the substrate. The molecular weight of the pure protein was estimated to be 75 kDa with SDS-PAGE and gel filtration. The isoelectric point of the pure enzyme was 7.3. The enzyme was most active in the pH range 5.5–9.0 whereas it was most stable in the pH range 6–9. The CGTase was most active in the temperature range 35–50°C. This CGTase is inherently temperature labile and rapidly loses activity above 30°C. However, presence of soluble starch and calcium chloride improved the temperature stability of the enzyme up to 40°C. In presence of 30% (v/v) glycerol, this enzyme was almost 100% stable at 30°C for a month. The K_m and k_cat values for the pure enzyme were 1.35 mg ml⁻¹ and 249 μM mg⁻¹ min⁻¹, respectively, with soluble starch as the substrate. The enzyme predominantly produced α-cyclodextrin without addition of any complexing agents. The conditions employed for maximum α-cyclodextrin production were 100 g l⁻¹ gelatinized soluble starch or 125 g l⁻¹ raw wheat starch at an enzyme concentration of 10 U g⁻¹ of starch. The α:β:γ-cyclodextrins were produced in the ratios of 81:12:7 and 89:9:2 from gelatinized soluble starch and raw wheat starch, respectively.     

γ-Cyclodextrin: a review on enzymatic production and applications

Cyclodextrins are cyclic α-1,4-glucans that are produced from starch or starch derivates using cyclodextrin glycosyltransferase (CGTase). The most common forms are α-, β-, and γ-cyclodextrins. This mini-review focuses on the enzymatic production, unique properties, and applications of γ-cyclodextrin as well as its difference with α- and β-cyclodextrins. As all known wild-type CGTases produce a mixture of α-, β-, and γ-cyclodextrins, the obtaining of a CGTase predominantly producing γ-cyclodextrin is discussed. Recently, more economic production processes for γ-cyclodextrin have been developed using improved γ-CGTases and appropriate complexing agents. Compared with α- and β-cyclodextrins, γ-cyclodextrin has a larger internal cavity, higher water solubility, and more bioavailability, so it has wider applications in many industries, especially in the food and pharmaceutical industries.     

Enhancement of enzymatic production of cyclodextrins by adding polyethylene glycol or polypropylene glycol

Enzymatic production of cyclodextrins (CDs) from soluble starch was studied using either Bacillus macerans or Bacillus ohbensis cyclomaltodextrin glucanotransferase (CGTase). The production yield of CDs was found to be increased up to 1.5–2 times by the addition of low molecular weight polyethylene glycol (PEG 400) or polypropylene glycol (PPG 425) to the reaction medium. Such results were interpreted as being due to a conformational change of the substrate as well as reduction of hydrolytic activity of the enzyme in the presence of these additives.     

Altered product specificity of a cyclodextrin glycosyltransferase by molecular imprinting with cyclomaltododecaose

Cyclodextrin glycosyltransferases (CGTases), members of glycoside hydrolase family 13, catalyze the conversion of amylose to cyclodextrins (CDs), circular α‐(1,4)‐linked glucopyranose oligosaccharides of different ring sizes. The CD containing 12 α‐D‐glucopyranose residues was preferentially synthesized by molecular imprinting of CGTase from Paenibacillus sp. A11 with cyclomaltododecaose (CD₁₂) as the template molecule. The imprinted CGTase was stabilized by cross‐linking of the derivatized protein. A high proportion of CD₁₂ and larger CDs was obtained with the imprinted enzyme in an aqueous medium. The molecular imprinted CGTase showed an increased catalytic efficiency of the CD₁₂‐forming cyclization reaction, while decreased k_cat/K_m values of the reverse ring‐opening reaction were observed. The maximum yield of CD₁₂ was obtained when the imprinted CGTase was reacted with amylose at 40°C for 30 min. Molecular imprinting proved to be an effective means toward increase in the yield of large‐ring CDs of a specific size in the biocatalytic production of these interesting novel host compounds for molecular encapsulations. Copyright © 2010 John Wiley & Sons, Ltd.     

β-cyclodextrin production by the cyclodextrin glucanotransferase from Paenibacillus illinoisensis ZY-08: cloning, purification, and properties

The gene encoding the cyclodextrin glucanotransferase (CGTase, EC2.4.1.19) of Paenibacillus illinoisensis was isolated, cloned, sequenced and expressed in Escherichia coli. Sequence analysis showed that the mature enzyme (684 amino acids) was preceded by a signal peptide of 34-residues. The deduced amino acid sequence of the CGTase from P. illinoisensis ZY-08 exhibited highest identity (99 %) to the CGTase sequence from Bacillus licheniformis (P14014). The four consensus regions of carbohydrate converting domain and Ca²⁺ binding domain could be identified in the sequence. The CGTase was purified by using cold expression vector, pCold I, and His-tag affinity chromatography. The molecular weight of the purified enzyme was about 74 kDa. The optimum temperature and pH of the enzyme were 40 °C and pH 7.4, respectively. The enzyme activity was increased by the addition of Ca²⁺ and inhibited by Ba²⁺, Cu²⁺, and Hg²⁺. The K _m and V _max values calculated were 0.48 mg/ml and 51.38 mg of β-cyclodextrin/ml/min. The ZY-08 and recombinant readily converted soluble starch to β-cyclodextrin but ZY-08 did not convert king oyster mushroom powder and enoki mushroom powder. However the recombinant CGTase converted king oyster mushroom powder and enoki mushroom powder to β-cyclodextrin.     

Substrate complexation and aggregation influence the cyclodextrin glycosyltransferase (CGTase) catalyzed synthesis of alkyl glycosides

Bacillus macerans cyclodextrin glycosyltransferase (CGTase) was used to convert dodecyl-β-maltoside (DDM) to dodecyl-β-maltooctaoside (DDMO) using α-cyclodextrin (α-CD) or starch as glycosyl donors. At 300 mM α-CD, varied DDM concentration and 60 °C, the reaction obeyed Michaelis-Menten kinetics with a K_m value of 18 mM and a V_max value of 100 U/mg enzyme. However, at 25 mM α-CD the reaction rate decreased with increasing DDM concentration (5-50 mM), and when the α-CD concentration was varied at fixed DDM concentration an S shaped curve was obtained. The deviations from Michaelis-Menten kinetics were interpreted as being caused by formation of inclusion complexes between α-CD and DDM and by micellation of DDM. To achieve a high reaction rate, a high concentration of free α-CD is necessary, since α-CD in the form of a complex has low reactivity. When starch is used as glycosyl donor in the CGTase catalyzed alkyl glycoside elongation reaction, it is thus important to choose reaction conditions under which the cyclization of starch to α-CD is efficient.