Interaction of the fusogenic peptide B18 in its amyloid-state with lipid membranes studied by solid state NMR

The interaction of the fusogenic polypeptide segment "B18" from the fertilization protein binding with lipid membranes was investigated by solid state 2H and 31P NMR, and by differential scanning calorimetry. B18 is known to adopt different conformations depending on peptide concentration, ionic conditions, pH and lipid environment. Here, the peptide was studied in its beta-stranded amyloid conformation. According to 31P NMR, the lamellar morphology of the DMPC bilayer remains intact in the presence of B18. In going from low (1:90) to high (1:10) peptide/lipid ratios, an increasing effect on several different 2H-labeled lipid segments was observed, reflecting changes in phase behavior and local dynamics. The strongest influence of B18 was detected at the acyl-chains, while no significant effect on the lipid headgroup conformation was observed. This suggests an insertion of B18 in its fibrillar state into the membrane driven by hydrophobic interactions, rather than a peripheral binding mediated by electrostatics.     

Solution structure determination and mutational analysis of the papillomavirus E6 interacting peptide of E6AP

E6AP is a cellular protein that binds cancer-related papillomaviral E6 proteins. The E6 binding domain, called E6ap, is located on an 18-amino acid segment of E6AP. The corresponding peptide was synthesized and its structure determined by nuclear magnetic resonance spectroscopy. The overall structure of the peptide is helical. A consensus E6-binding sequence among different E6 interacting proteins contains three conserved hydrophobic residues. In the structure of the E6AP peptide, the three conserved leucines (Leu 9, Leu 12, and Leu 13) form a hydrophobic patch on one face of the alpha-helix. Substitution of any of these leucines with alanine abolished binding to E6 protein, indicating that the entire hydrophobic patch is necessary. Mutation of a glutamate to proline, but not alanine, also disrupted the interaction between E6 and E6AP protein, suggesting that the E6-binding motif of the E6AP protein must be helical when bound to E6. Comparison of the E6ap structure and mutational results with those of another E6-binding protein (E6BP/ERC-55) indicates the existence of a general E6-binding motif.     

A novel S100 target conformation is revealed by the solution structure of the Ca2+-S100B-TRTK-12 complex

The Alzheimer-linked neural protein S100B is a signaling molecule shown to control the assembly of intermediate filament proteins in a calcium-sensitive manner. Upon binding calcium, a conformational change occurs in S100B exposing a hydrophobic surface for target protein interactions. The synthetic peptide TRTK-12 (TRTKIDWNKILS), derived from random bacteriophage library screening, bears sequence similarity to several intermediate filament proteins and has the highest calcium-dependent affinity of any target molecule for S100B to date (K(d) <1 microm). In this work, the three-dimensional structure of the Ca(2+)-S100B-TRTK-12 complex has been determined by NMR spectroscopy. The structure reveals an extended, contiguous hydrophobic surface is formed on Ca(2+)-S100B for target interaction. The TRTK-12 peptide adopts a coiled structure that fits into a portion of this surface, anchored at Trp(7), and interacts with multiple hydrophobic contacts in helices III and IV of Ca(2+)-S100B. This interaction is strikingly different from the alpha-helical structures found for other S100 target peptides. By using the TRTK-12 interaction as a guide, in combination with other available S100 target structures, a recognition site on helix I is identified that may act in concert with the TRTK-12-binding site from helices III and IV. This would provide a larger, more complex site to interact with full-length target proteins and would account for the promiscuity observed for S100B target protein interactions.     

Identification of an antimicrobial peptide from human methionine sulfoxide reductase B3

Human methionine sulfoxide reductase B3A (hMsrB3A) is an endoplasmic reticulum (ER) reductase that catalyzes the stereospecific reduction of methionine-R-sulfoxide to methionine in proteins. In this work, we identified an antimicrobial peptide from hMsrB3A protein. The N-terminal ER-targeting signal peptide (amino acids 1-31) conferred an antimicrobial effect in Escherichia coli cells. Sequence and structural analyses showed that the overall positively charged ER signal peptide had an Argand Pro-rich region and a potential hydrophobic α-helical segment that contains 4 cysteine residues. The potential α-helical region was essential for the antimicrobial activity within E. coli cells. A synthetic peptide, comprised of 2-26 amino acids of the signal peptide, was effective at killing Gram-negative E. coli, Klebsiella pneumoniae, and Salmonella paratyphi, but had no bactericidal activity against Gram-positive Staphylococcus aureus.     

Signal peptide hydrophobicity is critical for early stages in protein export by Bacillus subtilis

Signal peptides that direct protein export in Bacillus subtilis are overall more hydrophobic than signal peptides in Escherichia coli. To study the importance of signal peptide hydrophobicity for protein export in both organisms, the alpha-amylase AmyQ was provided with leucine-rich (high hydrophobicity) or alanine-rich (low hydrophobicity) signal peptides. AmyQ export was most efficiently directed by the authentic signal peptide, both in E. coli and B. subtilis. The leucine-rich signal peptide directed AmyQ export less efficiently in both organisms, as judged from pulse-chase labelling experiments. Remarkably, the alanine-rich signal peptide was functional in protein translocation only in E. coli. Cross-linking of in vitro synthesized ribosome nascent chain complexes (RNCs) to cytoplasmic proteins showed that signal peptide hydrophobicity is a critical determinant for signal peptide binding to the Ffh component of the signal recognition particle (SRP) or to trigger factor, not only in E. coli, but also in B. subtilis. The results show that B. subtilis SRP can discriminate between signal peptides with relatively high hydrophobicities. Interestingly, the B. subtilis protein export machinery seems to be poorly adapted to handle alanine-rich signal peptides with a low hydrophobicity. Thus, signal peptide hydrophobicity appears to be more critical for the efficiency of early stages in protein export in B. subtilis than in E. coli.     

Neutralizing monoclonal antibodies against human immunodeficiency virus type 2 gp120.

Monoclonal antibodies (MAbs) were obtained by immunizing mice with synthetic peptides corresponding to the third variable (V3) or the third conserved (C3) domain of the external envelope protein (gp120) of human immunodeficiency virus type 2 (HIV-2ROD). One MAb, designated B2C, which was raised against V3 peptide NKI26, bound to the surface of HIV-2-infected cells but not to their uninfected counterparts. B2C was capable of neutralizing cell-free and cell-associated virus infection in an isolate-specific fashion. The antibody-binding epitope was mapped to a 6-amino-acid peptide in the V3 variable domain which had the core sequence His-Tyr-Gln. Two MAbs, 2H1B and 2F19C, which were raised against the C3 peptide TND27 reacted with gp120 of HIV-2ROD in a Western immunoblot assay. The C3 epitopes recognized by these two MAbs appeared inaccessible because of their poor reactivity in a surface immunofluorescence assay. Although partial inhibition of syncytium formation was observed in the presence of the anti-C3 MAbs, their neutralizing activity appeared weak. Finally, the effects of these MAbs against CD4-gp120 binding were assessed. Partial inhibition of CD4-gp120 binding was observed in the presence of high concentrations of B2C. On the other hand, no inhibition of CD4-gp120 binding was observed in the presence of anti-C3 MAbs. Since complete neutralization could be achieved at a concentration corresponding to that of partial binding inhibition by B2C, some different mechanisms may be involved in the B2C-mediated neutralization. These results, taken together, indicated that analogous to the function of the V3 region of HIV-1, the V3 region of HIV-2ROD contained at least a type-specific fusion-inhibiting neutralizing epitope. In this respect, the V3 sequence of HIV-2 may be a useful target in an animal model for HIV vaccine development.     

Influence of transmembrane peptides on bilayers of phosphatidylcholines with different acyl chain lengths studied by solid-state NMR

The molecular orientation in a lipid membrane of the peptide fragment VEYAGIALFFVAAVLTLWSMLQYLSAAR (phosphatidylglycerophosphate synthase (Pgs) peptide E) of an integral membrane protein, Pgs, in Escherichia coli has been investigated by solid-state 15N nuclear magnetic resonance (NMR) on macroscopically aligned lipid bilayers. The secondary structure of the peptide in lipid vesicles was determined by circular dichroism spectroscopy. Furthermore, the phase behaviour of the Pgs peptide E/dierucoylphosphatidylcholine (DEruPC)/water system was determined by (2)H, (31)P and 15N solid-state NMR spectroscopy. The phase behaviour obtained was then compared to that of the Pgs peptide E solubilised in dioleoylphosphatidylcholine and water that was previously studied by Morein et al. [Biophys. J. 73 (1997) 3078-3088]. This was aimed to answer the question whether a difference in the length of the hydrophobic part of this peptide and the hydrophobic thickness of the lipid bilayer (hydrophobic mismatch) will affect the phase behaviour. The peptide mostly has a transmembrane orientation and is in an alpha-helical conformation. An isotropic phase is formed in DEruPC with high peptide content (peptide/lipid molar ratio (p/l) > or =1:15) and high water content (> or =50%, w/w) at 35 degrees C. At 55 and 65 degrees C an isotropic phase is induced at high water content (> or =50%, w/w) at all peptide contents studied (no isotropic phase forms in the lipid/water system under the conditions in this study). At high peptide contents (p/l> or =1:15) an isotropic phase forms at 20 and 40% (w/w) of water at 55 and 65 degrees C. A comparison of the phase behaviour of the two homologous lipid systems reveals striking similarities, although the thicknesses of the two lipid bilayers differ by 7 A. This suggests that the rationalisation of the phase behaviour in terms of the hydrophobic mismatch is not applicable to these systems. The C-terminus of Pgs peptide E is amphiphilic and a considerable part of the peptide is situated outside the hydrophobic part of the bilayer, a property of the peptide that to a large extent will affect the lipid/peptide phase behaviour.     

Co-autodisplay of Z-domains and bovine caseins on the outer membrane of E. coli

In this work, two proteins, Z-domains and bovine casein, were autodisplayed on the outer membrane of the same Escherichia coli cells by co-transformation of two different autodisplay vectors. On the basis of SDS-PAGE densitometry, Z-domains and bovine casein were expressed at 3.12 × 10⁵ and 1.55 × 10⁵ proteins/E. coli cell, respectively. The co-autodisplayed Z-domains had antibody-binding activity and the bovine casein had adhesive properties. E. coli with co-autodisplayed proteins were analyzed by fluorescence assisted cell sorting (FACS). E. coli with co-autodisplayed Z-domains and bovine casein aggregated due to hydrophobic interaction. For application to immunoassays, the Z-domain activity was estimated after (1) immobilizing the E. coli and (2) forming an OM layer. E. coli with co-autodisplayed two proteins that were immobilized on a polystyrene microplate had the same antibody-binding activity as did E. coli with autodisplayed Z-domains only. The OM layer from the co-transformed E. coli had Z-domains and bovine casein expressed at a 1:2 ratio from antibody-binding activity measurements.     

Interaction between ion channel-inactivating peptides and anionic phospholipid vesicles as model targets.

Studies of rapid (N-type) inactivation induced by different synthetic inactivating peptides in several voltage-dependent cation channels have concluded that the channel inactivation "entrance" (or "receptor" site for the inactivating peptide) consists of a hydrophobic vestibule within the internal mouth of the channel, separated from the cytoplasm by a region with a negative surface potential. These protein domains are conformed from alternative sequences in the different channels and thus are relatively unrestricted in terms of primary structure. We are reporting here on the interaction between the inactivating peptide of the Shaker B K+ channel (ShB peptide) or the noninactivating ShB-L7E mutant with anionic phospholipid vesicles, a model target that, as the channel's inactivation "entrance," contains a hydrophobic domain (the vesicle bilayer) separated from the aqueous media by a negatively charged vesicle surface. When challenged by the anionic phospholipid vesicles, the inactivating ShB peptide 1) binds to the vesicle surface with a relatively high affinity, 2) readily adopts a strongly hydrogen-bonded beta-structure, likely an intramolecular beta "hairpin," and 3) becomes inserted into the hydrophobic bilayer by its folded N-terminal portion, leaving its positively charged C-terminal end exposed to the extravesicular aqueous medium. Similar experiments carried out with the noninactivating, L7E-ShB mutant peptide show that this peptide 1) binds also to the anionic vesicles, although with a lower affinity than does the ShB peptide, 2) adopts only occasionally the characteristic beta-structure, and 3) has completely lost the ability to traverse the anionic interphase at the vesicle surface and to insert into the hydrophobic vesicle bilayer. Because the negatively charged surface and the hydrophobic domains in the model target may partly imitate those conformed at the inactivation "entrance" of the channel proteins, we propose that channel inactivation likely includes molecular events similar to those observed in the interaction of the ShB peptide with the phospholipid vesicles, i.e., binding of the peptide to the region of negative surface potential, folding of the bound peptide as a beta-structure, and its insertion into the channel's hydrophobic vestibule. Likewise, we relate the lack of channel inactivation seen with the mutant ShB-L7E peptide to the lack of ability shown by this peptide to cross through the anionic interphase and insert into the hydrophobic domains of the model vesicle target.     

Capping protein binding to S100B: implications for the tentacle model for capping the actin filament barbed end

S100B binds tightly to a 12-amino acid peptide derived from heterodimeric capping protein. In native intact capping protein, this sequence is in the C terminus of the alpha-subunit, which is important for capping the actin filament. This C-terminal region is proposed to act as a flexible "tentacle," extending away from the body of capping protein in order to bind actin. To this hypothesis, we analyzed the interaction between S100B and capping protein in solution. The C-terminal 28 amino acids of the alpha-subunit, the proposed tentacle, bound to S100B as a free synthetic peptide or a glutathione S-transferase fusion (K(d) approximately 0.4-1 microm). In contrast, S100B did not bind to whole native capping protein or functionally affect its capping activity. S100B does not bind, with any significant affinity, to the proposed alpha-tentacle sequence of whole native capping protein in solution. In the NMR structure of S100B complexed with the alpha-subunit-derived 12-amino acid peptide, the hydrophobic side of a short alpha-helix in the peptide, containing an important tryptophan residue, contacts S100B. In the x-ray structure of native capping protein, the corresponding sequence of the alpha-subunit C terminus, including Trp(271), interacts closely with the body of the protein. Therefore, our results suggest the alpha-subunit C terminus is not mobile as predicted by the tentacle model. Addition of non-ionic detergent allowed whole capping protein to bind weakly to S100B, indicating that the alpha-subunit C terminus can be mobilized from the surface of the capping protein molecule, presumably by weakening the hydrophobic binding at the contact site.     

Intragenic suppressor mutations that restore export of maltose binding protein with a truncated signal peptide

A deletion mutation, malE delta 12-18, removes seven residues from the hydrophobic core of the maltose binding protein (MBP) signal peptide and thus prevents secretion of this protein to the periplasm of E. coli. Intragenic suppressor mutations of malE delta 12-18 have been obtained, some highly efficient in their ability to restore proper MBP export. Twelve independently isolated suppressors represent six unique mutational events. Five result in alterations within the MBP signal peptide; one changes the amino acid at residue 19 of the mature MBP. Analysis of these suppressors indicates that the length of the hydrophobic core is a major determinant of signal peptide function. The experiments further suggest that the hydrophobic core region serves primarily a structural role in mediating protein secretion, and that other sequences outside of this region may be responsible for providing the initial recognition of the MBP nascent chain as a secreted protein.     

Peptides binding to a Gb3 mimic selected from a phage library

Peptides binding to a Gb3 mimic were selected from 12-mer peptide library. The self-assembled monolayer (SAM) of a Gb3 mimic was formed on the gold surface, and biopanning was carried out with the phage display peptide library. After three rounds of biopanning, four individual sequences were obtained from 10 phage clones, and the selected peptides having the specific 7-mer sequence (FHENWPS) showed affinities to the Gb3 mimic as strong as to RCA120. Molecular dynamics calculations suggested that the peptides bound to the Gb3 mimic by hydrophobic interaction and hydrogen bonding formation, and the cooperative interactions played an important role in the recognition. The Stx-1 binding was inhibited by the peptides.     

Modular, self-assembling peptide linkers for stable and regenerable carbon nanotube biosensor interfaces

As part of an effort to develop nanoelectronic sensors for biological targets, we tested the potential to incorporate coiled coils as metallized, self-assembling, site-specific molecular linkers on carbon nanotubes (CNTs). Based on a previously conceived modular anchor-probe approach, a system was designed in which hydrophobic residues (valines and leucines) form the interface between the two helical peptide components. Charged residues (glutamates and arginines) on the borders of the hydrophobic interface increase peptide solubility, and provide stability and specificity for anchor-probe assembly. Two histidine residues oriented on the exposed hydrophilic exterior of each peptide were included as chelating sites for metal ions such as cobalt. Cysteines were incorporated at the peptide termini for oriented, thiol-mediated coupling to surface plasmon resonance (SPR) biosensor surfaces, gold nanoparticles or CNT substrates. The two peptides were produced by solid phase peptide synthesis using Fmoc chemistry: an acidic 42-residue peptide E42C, and its counterpart in the heterodimer, a basic 39-residue peptide R39C. The ability of E42C and R39C to bind cobalt was demonstrated by immobilized metal affinity chromatography and isothermal titration calorimetry. SPR biosensor kinetic analysis of dimer assembly revealed apparent sub-nanomolar affinities in buffers with and without 1 mM CoCl2 using two different reference surfaces. For device-oriented CNT immobilization, R39C was covalently anchored to CNT tips via a C-terminal cysteine residue. Scanning electron microscopy was used to visualize the assembly of probe peptide (E42C) N-terminally labeled with 15 nm gold nanoparticles, when added to the R39C-CNT surface. The results obtained open the way to develop CNT tip-directed recognition surfaces, using recombinant and chemically synthesized chimeras containing binding epitopes fused to the E42C sequence domain.     

Expression in Escherichia coli of the psbO gene encoding the 33 kd protein of the oxygen-evolving complex from spinach.

The cDNA for the 33 kd protein from the oxygen-evolving complex of spinach together with the coding region for the hydrophobic C-terminal part of the transit sequence was cloned into the expression plasmid pDS12/33Ex. The 33 kd protein precursor was expressed in Escherichia coli, secreted into the periplasm and correctly processed to the mature 33 kd protein. Thus the hydrophobic domain of the transit sequence, preceded by a methionine and two lysine residues, can function as a bacterial signal peptide. The periplasmic proteins were released from the cells by osmotic shock and the expressed protein was purified by anion exchange chromatography. The protein was identified by SDS-PAGE and Western blotting. N-terminal sequence analysis showed that the cleavage of the signal peptide occurred at the correct position. The expressed protein could be rebound to CaCl2-washed PSII particles and oxygen evolution was restored in equal amounts by the 33 kd protein from both E. coli and spinach.     

Multistep regulation of membrane insertion of the fusion peptide of Semliki Forest virus

A prevailing model for virus membrane fusion proteins has been that the hydrophobic fusion peptide is hidden in the prefusion conformation, becomes exposed once the fusion reaction is triggered, and then either inserts into target membranes or is rapidly inactivated. This model is in general agreement with the structure and mechanism of class I fusion proteins, such as the influenza virus hemagglutinin. We here describe studies of the class II fusion protein E1 from the alphavirus Semliki Forest virus (SFV). SFV fusion is triggered by low pH, which releases E1 from its heterodimeric interaction with the E2 protein and induces the formation of a stable E1 homotrimer. The exposure and target membrane interaction of the E1 fusion peptide (residues 83 to 100) were followed using a monoclonal antibody (MAb E1f) mapping to E1 residues 85 to 95. In agreement with the known structure of SFV and other alphaviruses, the fusion peptide was shielded in native SFV particles and exposed when E1-E2 dimer dissociation was triggered by acidic pH. In contrast, the fusion peptide on purified E1 ectodomains (E1(*)) was fully accessible at neutral pH. Functional assays showed that MAb E1f binding at neutral pH prevented subsequent low-pH-triggered E1(*) interaction with target membranes and trimerization. E1(*) was not inactivated by low pH when treated either in the absence of target membranes or in the presence of fusion-inactive cholesterol-deficient liposomes. Thus, the membrane insertion of the E1 fusion peptide is regulated by additional low-pH-dependent steps after exposure, perhaps involving an E1-cholesterol interaction.     

Chemical identification of cysteine as palmitoylation site in a transmembrane protein (Semliki Forest virus E1)

The palmitoylation site of the membrane glycoprotein E1 of Semliki Forest virus (SFV) has been identified by chemical analysis of an acylpeptide. 3H-Palmitoylated E1 isolated from SFV grown in baby hamster kidney cells was digested with chymotrypsin and the resulting peptides subjected to high performance liquid chromatography on a wide-pore column. The 3H-acylated peptide fraction peaked at above 60% 2-propanol in the eluent, indicating its hydrophobic character. Polyacrylamide gel electrophoresis analysis revealed a molecular weight of about Mr = 6000 for the radiolabeled peptide. Manual sequencing of this material by the 4-N,N'-dimethylaminoazobenzene-4'-isothiocyanate/phenylisothiocyanate procedure on solid phase revealed the amino-terminal sequence Ala-Ala-Ser-His-Ser-Asn-Val-Val-Phe-Pro. The same peptide also labels with [35S]cysteine. Comparison with the deduced amino acid sequence of E1 revealed that the palmitoylated peptide contains at least 43 amino acid residues, and thus includes the membrane spanning region down to the only cysteine residue five positions up from the carboxyl terminus of E1. Since [3H]palmitic acid was cleaved from E1 with thiol reagents, and since the peptide labels with [14C]iodoacetamide only after the release of fatty acids by hydroxylamine treatment, cysteine in position 433 represents the palmitoylation site in SFV E1.     

In vitro determination of dengue virus type 2 NS2B-NS3 protease activity with fluorescent peptide substrates

The NS2B-NS3(pro) polyprotein segment from the dengue virus serotype 2 strain 16681 was purified from overexpressing E. coli by metal chelate affinity chromatography and gel filtration. Enzymatic activity of the refolded NS2B-NS3(pro) protease complex was determined in vitro with dansyl-labeled peptide substrates, based upon native dengue virus type 2 cleavage sites. The 12mer substrate peptides and the cleavage products could be separated by reversed-phase HPLC, and were identified by UV and fluorescence detection. All of the peptide substrates (representing the DEN polyprotein junction sequences at the NS2A/NS2B, NS2B/NS3, NS3/NS4A and NS4B/NS5 sites) were cleaved by the recombinant protease NS2B-NS3(pro). No cleavage was observed with an enzymatically inactive S135A mutant of the NS3 protein, or with a modified substrate peptide of the NS3/NS4A polyprotein site that contained a K2093A substitution. Enzymatic activity was dependent on the salt concentration. A 50% decrease of activity was observed in the presence of 0.1 M sodium chloride. Our results show that the NS3 protease activity of the refolded NS2BNS3(pro) protein can be assayed in vitro with high specificity by using cleavage-junction derived peptide substrates.     

Atypical fusion peptide of Nelson Bay virus fusion-associated small transmembrane protein

A 10-kDa nonstructural transmembrane protein (p10) encoded by a reovirus, Nelson Bay virus, has been shown to induce syncytium formation (34). Sequence analysis and structural studies identified p10 as a type I membrane protein with a central transmembrane domain, a cytoplasmic basic region, and an N-terminal hydrophobic domain (HD) that was hypothesized to function as a fusion peptide. We performed mutational analysis on this slightly hydrophobic motif to identify possible structural requirements for fusion activity. Bulky aliphatic residues were found to be essential for optimal fusion, and an aromatic or highly hydrophobic side chain was found to be required at position 12. The requirement for hydrophilic residues within the HD was also examined: substitution of 10-Ser or 14-Ser with hydrophobic residues was found to reduce cell surface expression of p10 and delayed the onset of syncytium formation. Nonconservative substitutions of charged residues in the HD did not have an effect on fusion activity. Taken together, our results suggest that the HD is involved in both syncytium formation and in determining p10 transport and surface expression.     

Identification of phage-displayed peptides which bind to the human HnRNPA1 protein-specific monoclonal antibody.

We have screened a peptide phage display library to examine if monoclonal antibody-binding phages could be isolated from the library and thereby predict the antigenic epitopes of the antibodies from the isolated phages. The library was screened for high-avidity binding to monoclonal antibodies by an affinity purification technique called biopanning. Among the monoclonal antibodies examined, the human hnRNPA1 protein-specific monoclonal antibody 9H10 showed selective binding of phages. After two rounds of the biopanning, twelve clones of high-avidity-binding phages were chosen and their inserts were sequenced. Nucleotide sequence comparison of the 12 clones showed that there were 5 different species, with two species containing four members, implying that they were predominantly selected by the biopanning. The amino acid sequences of the inserts of the 12 clones were compared with that of the human hnRNPA1 protein in order to find the putative epitope of the human hnRNPA1 protein for 9H10. The C-terminal region of the human hnRNPA1 protein shows significant homology with the peptide sequences of the selected phage clones. These results show that this peptide phage display library can be useful in defining the epitope of some monoclonal antibodies.     

Controlled antibody immobilization onto immunoanalytical platforms by synthetic peptide

Antibody immobilization on a solid surface is inevitable in the preparation of immunochips/sensors. Antibody-binding proteins such as proteins A and G have been extensively employed to capture antibodies on sensor surfaces with right orientations, maintaining their full functionality. Because of their synthetic versatility and stability, in general, small molecules have more advantages than proteins. Nevertheless, no small molecule has been used for oriented and specific antibody immobilization. Here is described a novel strategy to immobilize an antibody on various sensor surfaces by using a small antibody-binding peptide. The peptide binds specifically to the Fc domain of immunoglobulin G (IgG) and, therefore, affords a properly oriented antibody surface. Surface plasmon resonance analysis indicated that a peptide linked to a gold chip surface through a hydrophilic linker efficiently captured human and rabbit IgGs. Moreover, antibodies captured by the peptide exhibited higher antigen binding capacity compared with randomly immobilized antibodies. Peptide-mediated antibody immobilization was successfully applied on the surfaces of biosensor substrates such as magnetic particles and glass slides. The antibody-binding peptide conjugate introduced in this work is the first small molecule linker that offers a highly stable and specific surface platform for antibody immobilization in immunoassays.