Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.     

Comb polymers prepared by ATRP from hydroxypropyl cellulose

Hydroxypropyl cellulose (HPC) was used as a core molecule for controlled grafting of monomers by ATRP, the aim being to produce densely grafted comb polymers. HPC was either allowed to react with an ATRP initiator or the first generation initiator-functionalized 2,2-bis(methylol)propionic acid dendron to create macroinitiators having high degrees of functionality. The macroinitiators were then "grafted from" using ATRP of methyl methacrylate (MMA) or hexadecyl methacrylate. Block copolymers were obtained by chain extending PMMA-grafted HPCs via the ATRP of tert-butyl acrylate. Subsequent selective acidolysis of the tert-butyl ester moieties was performed to form a block of poly(acrylic acid) resulting in amphiphilic block copolymer grafts. The graft copolymers were characterized by 1H NMR and FT-IR spectroscopies, DSC, TGA, rheological measurements, DLS, and tapping mode AFM on samples spin coated upon mica. It was found that the comb (co)polymers were in the nanometer size range and that the dendronization had an interesting effect on the rheological properties.     

Antibacterial polypropylene via surface-initiated atom transfer radical polymerization

Polypropylene (PP) coated by a non-leachable biocide was prepared by chemically attaching poly(quaternary ammonium) (PQA) to the surface of PP. The well-defined poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA), a precursor of PQA, was grown from the surface of PP via atom transfer radical polymerization (ATRP). The tertiary ammine groups in PDMAEMA were consequently converted to QA in the presence of ethyl bromide. Successful surface modification was confirmed by ATR-FTIR, contact angle measurement, and an antibacterial activity test against Escherichia coli (E. coli). The biocidal activity of the resultant surfaces depends on the amount of the grafted polymers (the number of available quaternary ammonium units). With the same grafting density, the surface grafted with relatively high MW polymers (M(n) > 10,000 g/mol) showed almost 100% killing efficiency (killing all of the input E. coli (2.9 x 10(5)) in the shaking test), whereas a low biocidal activity (85%) was observed for the surface grafted with shorter PQA chains (M(n) = 1,500 g/mol).     

ATRP grafting from cellulose fibers to create block-copolymer grafts

Cellulose fibers, in the form of a conventional filter paper, have been modified by reacting the hydroxyl groups on the fiber surface with 2-bromoisobutyryl bromide, followed by grafting using ATRP conditions. The papers were first grafted with methyl acrylate (MA), rendering the paper very hydrophobic as reported in an earlier work. The papers were analyzed by gravimetry, FT-IR, ESCA, and AFM. To verify that the polymerization from the surface was "living", a second layer of another, hydrophilic, polymer, 2-hydroxyethyl methacrylate (HEMA), was grafted upon the PMA layer, creating a block-copolymer graft from the fibers. After the layer of PHEMA had been attached, contact angle measurements were no longer possible, because of the absorbing nature of PHEMA-grafted layer. This indicates that a copolymer had indeed been formed on the surface. FT-IR showed a large increase in carbonyl content after the PHEMA-grafting, which further proves that a layer of PHEMA was attached to the PMA layer. This goes to show that the hydrophilic/hydrophobic behavior of a cellulose surface can be tailored by the use of "living"/controlled radical polymerization methods such as ATRP.     

Polyelectrolyte brushes grafted from cellulose nanocrystals using Cu-mediated surface-initiated controlled radical polymerization

Herein we report the synthesis of cellulose nanocrystals (CNCs) grafted with poly(acrylic acid) (PAA) chains of different lengths using Cu-mediated surface initiated-controlled radical polymerization (SI-CRP). First, poly(tert-butylacrylate) (PtBA) brushes were synthesized; then, subsequent acid hydrolysis was used to furnish PAA brushes tethered onto the CNC surfaces. The CNCs were chemically modified to create initiator moieties on the CNC surfaces using chemical vapor deposition (CVD) and continued in solvent phase in DMF. A density of initiator groups of 4.6 bromine ester groups/nm(2) on the CNC surface was reached, suggesting a dense functionalization and a promising starting point for the controlled/living radical polymerization. The SI-CRP of tert-butylacrylate proceeded in a well-controlled manner with the aid of added sacrificial initiator, yielding polymer brushes with polydispersity values typically well below 1.12. We calculated the polymer brush grafting density to almost 0.3 chains/nm(2), corresponding to high grafting densities and dense polymer brush formation on the nanocrystals. Successful rapid acid hydrolysis to remove the tert-butyl groups yielded pH-responsive PAA-polyelectrolyte brushes bound to the CNC surface. Individually dispersed rod-like nanoparticles with brushes of PtBA or PAA were clearly visualized by AFM and TEM imaging.     

Bifunctional dendronized cellulose surfaces as biosensors

Well-defined dendronized cellulose substrates displaying multiple representations of dual-functionality were constructed by taking advantage of the efficiency of the click reaction combined with traditional anhydride chemistry. First, activated cellulose surfaces were decorated with several generations of dendrons, and their peripheral reactive groups were subsequently reacted with a trifunctional orthogonal monomer. The generated substrate tool box was successfully explored by accurately tuning the surface function using a versatile orthogonal dual postfunctionalization approach. In general, the reactions were monitored by using a click-dye reagent or a quartz crystal microbalance (QCM) technique, and the resulting surfaces were well-characterized using XPS, FT-IR, and contact angle measurements. Utilizing this approach two different surfaces have been obtained; that is, triethylenglycol oligomers and amoxicillin molecules were efficiently introduced to the dendritic surface. As a second example, mannose-decorated hydroxyl functional surfaces illustrated their potential as biosensors by multivalent detection of lectin protein at concentration as low as 5 nM.     

Cellular response to magnetic nanoparticles PEGylated via surface-initiated atom transfer radical polymerization

A new method to PEGylate magnetic nanoparticles with a dense layer of poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) by surface-initiated atom transfer radical polymerization (ATRP) is reported. In this approach, an initiator for ATRP was first immobilized onto the magnetic nanoparticle surface, and then P(PEGMA) was grafted onto the surface of magnetic nanoparticle via copper-mediated ATRP. The modified nanoparticles were subjected to detailed characterization using FTIR, XPS, and TGA. The P(PEGMA)-immobilized nanoparticles dispersed well in aqueous media. The saturation magnetization values of the P(PEGMA)-immobilized nanoparticles were 19 emu/g and 11 emu/g after 2 and 4 h polymerization respectively, compared to 52 emu/g for the pristine magnetic nanoparticles. The response of macrophage cells to pristine and P(PEGMA)-immobilized nanoparticles was compared. The results showed that the macrophage cells are very effective in cleaning up the pristine magnetic nanoparticles. With the P(PEGMA)-immobilized nanoparticles, the amount of nanoparticles internalized into the cells is greatly reduced to <2 pg/cell over a 5 day period. With this amount of nanoparticles uptake, no significant cytotoxicity effects were observed.     

Degradable-brushed pHEMA-pDMAEMA synthesized via ATRP and click chemistry for gene delivery

Brushed polymers composed of a backbone of poly(hydroxyethyl methacrylate) (pHEMA) onto which poly(2-(dimethylamino)ethyl methacrylate)s (pDMAEMAs) was grafted via a hydrolyzable linker were synthesized and evaluated as nonviral gene delivery vectors. Both pDMAEMA and pHEMA polymers with controlled molecular weights and narrow distributions were synthesized by controlled atom transfer radical polymerization (ATRP). The azide initiator was used to ensure complete and monoazide functionalization of the pDMAEMA polymer chains. Click reaction between pHEMA with alkyne side groups and the azide end group in the pDMAEMA resulted in a high-molecular-weight polymer composed of low-molecular-weight constituents via an easily degradable carbonate ester linker. The length of the pDMAEMA grafts as well as the number of grafts of the brushed pHEMA-pDMAEMA can be easily varied. At physiological conditions (pH 7.4 and 37 degrees C), the brushed polymer degraded by hydrolysis of the carbonate ester with a half-life of 96 h. The molecular weights of the formed degradation products was very close to that of the starting pDMAEMA, which is likely below the renal excretion limit (<30 kDa). It was shown that the degradable brushed pHEMA-pDMAEMAs were able to condense plasmid DNA into positively charged nanosized particles. The resulting polyplexes were able to transfect cells efficiently in the presence of the endosomal membrane disrupting INF-7 peptide, and all these degradable polymers showed lower cellular toxicity compared to a high-molecular-weight pDMAEMA reference. On the other hand, the low-molecular-weight pDMAEMA used for the grafting to pHEMA was neither able to condense the structure of DNA nor able to transfect cells. This study demonstrates that grafting a low-molecular-weight cationic polymer via a hydrolyzable linker to a neutral hydrophilic polymer is an effective approach to modulate the transfection activity and toxicity profile of gene delivery polymers.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Cellulose microfibrils grafted with PBA via surface-initiated atom transfer radical polymerization for biocomposite reinforcement

Immobilizing poly(butyl acrylate) (PBA) on cellulose microfibrils (CMFs) by atom transfer radical polymerization (ATRP) of butyl acrylate (BA) on the surface of 2-bromoisobutyryl-functionalized CMF generated highly hydrophobic microfibrils (CMF-PBA) with a hard core and a soft-shell structure. TGA and static water contact angle results suggested that the surfaces of the modified CMF samples were not completely covered by PBA chains until the molecular weight of grafts became sufficiently long. The GPC results indicated that the grafts with low molecular weight showed controlled/"living" characteristics of the surface-initiated ATRP; however, there existed more side reactions with the increase in molecular weights. Biocomposites consisting of polypropylene (PP) and CMF-PBA samples exhibited significantly improved compatibility, interface adhesion, and mechanical properties with the increase in PBA graft length. The findings confirmed that the longer grafts facilitated the better entanglement of PBA grafts with PP macromolecules and thus further improved the mechanical properties.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N'-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2?h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24?h exposure) and cyprid settlement (24 and 48?h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Friction between cellulose surfaces and effect of xyloglucan adsorption

The forces and friction between cellulose spheres have been measured in the absence and presence of xyloglucan using an atomic force microscope. The forces between cellulose are monotonically repulsive with negligible adhesion after contact is achieved. The friction coefficient is observed to be unusually high in comparison with other nanotribological systems. We have confirmed that xyloglucan adsorbs strongly to cellulose, which results in a much stronger adhesion, which is dependent on the time the surfaces are in contact. Xyloglucan also increases the repulsion on approach of the cellulose surfaces, and the friction is markedly reduced. The apparently incompatible observations of decreased friction in combination with increased adhesion fulfills many of the necessary criteria for a papermaking additive.     

Direct force measurements between cellulose surfaces and colloidal silica particles

The interaction of cellulose layers with colloidal silica particles was investigated by direct force measurements with the atomic force microscope (AFM). Upon approach, repulsive forces were found between the negatively charged silica particles and the cellulose surface. The forces were interpreted quantitatively in terms of electrostatic interactions due to overlap of diffuse layers originating from negatively charged carboxylic groups on the cellulose surface. The diffuse layer charge density of cellulose was estimated to be 0.80 mC/m2 at pH 9.5 and 0.21 mC/m2 at pH 4. The forces upon retraction are characterized by molecular adhesion events, whereby individual cellulose chains desorb from the probe surface. The retraction profiles are dominated by well-defined force plateaus, which correspond to single-chain desorption forces of 35-42 pN. We surmise that adsorption of cellulose to probe surfaces is dominated by nonelectrostatic forces, probably originating from hydrogen bonding. Electrostatic contributions to desorption force could be detected only at high pH, where the silica surface is highly charged.     

Engineering cell surfaces via liposome fusion

In this study, we have rewired cell surfaces with ketone and oxyamine molecules based on liposome fusion for applications in cell-surface engineering. Lipid vesicles, functionalized with ketone and oxyamine molecules, display complementary chemistry and undergo recognition, docking, and subsequent fusion upon covalent oxime bond formation. Liposome fusion was characterized by several techniques including matrix-assisted laser-desorption/ionization mass spectrometry (MALDI-MS), light scattering, fluorescence resonance energy transfer (FRET), and transmission electron microscopy (TEM). When cultured with cells, ketone- and oxyamine-containing liposomes undergo spontaneous membrane fusion to present the respective molecules from cell surfaces. Ketone-functionalized cell surfaces serve as sites for chemoselective ligation with oxyamine-conjugated molecules. We tailored and fluorescently labeled cell surfaces with an oxyamine-conjugated rhodamine dye. As an application of this cell-surface engineering strategy, ketone- and oxyamine-functionalized cells were patterned on oxyamine- and ketone-presenting surfaces, respectively. Cells adhered, spread, and proliferated in the patterned regions via interfacial oxime linkage. The number of ketone molecules on the cell surface was also quantified by flow cytometry.     

Antibacterial cellulose fiber via RAFT surface graft polymerization

2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from cellulosic filter paper via reversible addition-fragmentation chain transfer (RAFT) polymerization. The tertiary amino groups of the grafted PDMAEMA chains were subsequently quaternized with alkyl bromides of different chain lengths (C8-C16) to provide a large concentration of quaternary ammonium groups on the cellulose surface. The antibacterial activity of the quaternized and nonquaternized PDMAEMA-grafted cellulosic fibers was tested against Escherichia coli. The antibacterial activity was found to depend on the alkyl chain length and on the degree of quaternization, i.e., the amount of quaternary amino groups present in the cellulose graft copolymers. The PDMAEMA-grafted cellulose fiber with the highest degree of quaternization and quaternized with the shortest alkyl chains was found to exhibit particularly high activity against E. coli.     

Preparation of ultrafine oxidized cellulose mats via electrospinning

Ultrafine oxidized cellulose (OC) mats were prepared by oxidation of ultrafine cellulose mats produced by electrospinning and subsequent deacetylation of cellulose acetate for potential applications in nonwoven adhesion barriers. When ultrafine cellulose mats were oxidized with a mixture of HNO3/H3PO4 - NaNO2 (2/1/1.4 v/v/wt %), their ultrafine mat structure remained unchanged. The yield and carboxyl content of OC mats were 86.7% and 16.8%, respectively. OC showed lower crystallinity than cellulose because the oxidation of cellulose proceeded via disruption of hydrogen bonds between cellulose chains. The swelling behaviors of ultrafine OC mats were dependent on the type of swelling solution. In a physiological salt solution, their degree of swelling was approximately 230%.     

Controlled/living surface-initiated ATRP of antifouling polymer brushes from gold in PBS and blood sera as a model study for polymer modifications in complex biological media

The use of PBS, 10% FBS or 10% CS as media for SI-ATRP is reported. Controlled/living SI-ATRP of MeOEGMA in PBS is achieved leading to better control than in water. The livingness is confirmed by chain extension with MeOEGMA or carboxybetaine acrylamide. This technique is successfully adopted for the polymerization of MeOEGMA in 10% FBS or CS as models for complex biological media with reasonable control of the brush growth. All prepared brushes show excellent antifouling properties.