The role of the S-S bridge in retroviral protease function and virion maturation

Retroviral proteases are translated as a part of Gag-related polyproteins, and are released and activated during particle release. Mason-Pfizer monkey virus (M-PMV) Gag polyproteins assemble into immature capsids within the cytoplasm of the host cells; however, their processing occurs only after transport to the plasma membrane and subsequent release. Thus, the activity of M-PMV protease is expected to be highly regulated during the replication cycle. It has been proposed that reversible oxidation of protease cysteine residues might be responsible for such regulation. We show that cysteine residues in M-PMV protease can form an intramolecular S-S bridge. The disulfide bridge shifts the monomer/dimer equilibrium in favor of the dimer, and increases the proteolytic activity significantly. To investigate the role of this disulfide bridge in virus maturation and replication, we engineered an M-PMV clone in which both protease cysteine residues were replaced by alanine (M-PMV(PRC7A/C106A)). Surprisingly, the cysteine residues were dispensable for Gag polyprotein processing within the virus, indicating that even low levels of protease activity are sufficient for polyprotein processing during maturation. However, the long-term infectivity of M-PMV(PRC7A/C106A) was noticeably compromised. These results show clearly that the proposed redox mechanism does not rely solely on the formation of the stabilizing S-S bridge in the protease. Thus, in addition to the protease disulfide bridge, reversible oxidation of cysteine and/or methionine residues in other domains of the Gag polyprotein or in related cellular proteins must be involved in the regulation of maturation.     

Systematic mutational analysis of the active-site threonine of HIV-1 proteinase: rethinking the "fireman's grip" hypothesis

Aspartic proteinases share a conserved network of hydrogen bonds (termed "fireman's grip"), which involves the hydroxyl groups of two threonine residues in the active site Asp-Thr-Gly triplets (Thr26 in the case of human immunodeficiency virus type 1 (HIV-1) PR). In the case of retroviral proteinases (PRs), which are active as symmetrical homodimers, these interactions occur at the dimer interface. For a systematic analysis of the "fireman's grip," Thr26 of HIV-1 PR was changed to either Ser, Cys, or Ala. The variant enzymes were tested for cleavage of HIV-1 derived peptide and polyprotein substrates. PR(T26S) and PR(T26C) showed similar or slightly reduced activity compared to wild-type HIV-1 PR, indicating that the sulfhydryl group of cysteine can substitute for the hydroxyl of the conserved threonine in this position. PR(T26A), which lacks the "fireman's grip" interaction, was virtually inactive and was monomeric in solution at conditions where wild-type PR exhibited a monomer-dimer equilibrium. All three mutations had little effect when introduced into only one chain of a linked dimer of HIV-1 PR. In this case, even changing both Thr residues to Ala yielded residual activity suggesting that the "fireman's grip" is not essential for activity but contributes significantly to dimer formation. Taken together, these results indicate that the "fireman's grip" is crucial for stabilization of the retroviral PR dimer and for overall stability of the enzyme.     

Luminometric method for screening retroviral protease inhibitors

We have developed a sensitive luminometric assay for determining the activity of retroviral proteases that uses proteolytic cleavage of polypeptide substrate immobilized on Ni-NTA HisSorb Strips microplates. The protease substrate derived from the Gag precursor protein of Mason-Pfizer monkey virus (M-PMV) was conjugated with horseradish peroxidase (HRP), which catalyzes oxidation of luminol in the assay. The cleavage of the substrate was monitored as a decrease in luminescent signal caused by the release of the cleavage product conjugated to HRP. Testing of a set of M-PMV protease inhibitors confirmed that this method is sufficiently sensitive and specific for high-throughput screening of retroviral protease inhibitors.     

Cleavage of vimentin by different retroviral proteases

Proteases (PRs) of retroviruses cleave viral polyproteins into their mature structural proteins and replication enzymes. Besides this essential role in the replication cycle of retroviruses, PRs also cleave a variety of host cell proteins. We have analyzed the in vitro cleavage of mouse vimentin by proteases of human immunodeficiency virus type 1 (HIV-1) and type 2 (HIV-2), bovine leukemia virus (BLV), Mason-Pfizer monkey virus (M-PMV), myeloblastosis-associated virus (MAV), and two active-site mutants of MAV PR. Retroviral proteases display significant differences in specificity requirements. Here, we show a comparison of substrate specificities of several retroviral proteases on vimentin as a substrate. Vimentin was cleaved by all the proteases at different sites and with different rates. The results show that the physiologically important cellular protein vimentin can be degraded by different retroviral proteases.     

Amino acid preferences for a critical substrate binding subsite of retroviral proteases in type 1 cleavage sites

The specificities of the proteases of 11 retroviruses representing each of the seven genera of the family Retroviridae were studied using a series of oligopeptides with amino acid substitutions in the P2 position of a naturally occurring type 1 cleavage site (Val-Ser-Gln-Asn-Tyr Pro-Ile-Val-Gln; the arrow indicates the site of cleavage) in human immunodeficiency virus type 1 (HIV-1). This position was previously found to be one of the most critical in determining the substrate specificity differences of retroviral proteases. Specificities at this position were compared for HIV-1, HIV-2, equine infectious anemia virus, avian myeloblastosis virus, Mason-Pfizer monkey virus, mouse mammary tumor virus, Moloney murine leukemia virus, human T-cell leukemia virus type 1, bovine leukemia virus, human foamy virus, and walleye dermal sarcoma virus proteases. Three types of P2 preferences were observed: a subgroup of proteases preferred small hydrophobic side chains (Ala and Cys), and another subgroup preferred large hydrophobic residues (Ile and Leu), while the protease of HIV-1 preferred an Asn residue. The specificity distinctions among the proteases correlated well with the phylogenetic tree of retroviruses prepared solely based on the protease sequences. Molecular models for all of the proteases studied were built, and they were used to interpret the results. While size complementarities appear to be the main specificity-determining features of the S2 subsite of retroviral proteases, electrostatic contributions may play a role only in the case of HIV proteases. In most cases the P2 residues of naturally occurring type 1 cleavage site sequences of the studied proteases agreed well with the observed P2 preferences.     

Reversible oxidative modification as a mechanism for regulating retroviral protease dimerization and activation

Human immunodeficiency virus protease activity can be regulated by reversible oxidation of a sulfur-containing amino acid at the dimer interface. We show here that oxidation of this amino acid in human immunodeficiency virus type 1 protease prevents dimer formation. Moreover, we show that human T-cell leukemia virus type 1 protease can be similarly regulated through reversible glutathionylation of its two conserved cysteine residues. Based on the known three-dimensional structures and multiple sequence alignments of retroviral proteases, it is predicted that the majority of retroviral proteases have sulfur-containing amino acids at the dimer interface. The regulation of protease activity by the modification of a sulfur-containing amino acid at the dimer interface may be a conserved mechanism among the majority of retroviruses.     

Synthetic "interface" peptides alter dimeric assembly of the HIV 1 and 2 proteases.

Retroviral proteases are obligate homodimers and play an essential role in the viral life cycle. Dissociation of dimers or prevention of their assembly may inactivate these enzymes and prevent viral maturation. A salient structural feature of these enzymes is an extended interface composed of interdigitating N- and C-terminal residues of both monomers, which form a four-stranded beta-sheet. Peptides mimicking one beta-strand (residues 95-99), or two beta-strands (residues 1-5 plus 95-99 or 95-99 plus 95-99) from the human immunodeficiency virus 1 (HIV1) interface were shown to inhibit the HIV1 and 2 proteases (PRs) with IC50's in the low micromolar range. These interface peptides show cognate enzyme preference and do not inhibit pepsin, renin, or the Rous sarcoma virus PR, indicating a degree of specificity for the HIV PRs. A tethered HIV1 PR dimer was not inhibited to the same extent as the wild-type enzymes by any of the interface peptides, suggesting that these peptides can only interact effectively with the interface of the two-subunit HIV PR. Measurements of relative dissociation constants by limit dilution of the enzyme show that the one-strand peptide causes a shift in the observed Kd for the HIV1 PR. Both one- and two-strand peptides alter the monomer/dimer equilibrium of both HIV1 and HIV2 PRs. This was shown by the reduced cross-linking of the HIV2 PR by disuccinimidyl suberate in the presence of the interface peptides. Refolding of the HIV1 and HIV2 PRs with the interface peptides shows that only the two-strand peptides prevent the assembly of active PR dimers. Although both one- and two-strand peptides seem to affect dimer dissociation, only the two-strand peptides appear to block assembly. The latter may prove to be more effective backbones for the design of inhibitors directed toward retroviral PR dimerization in vivo.     

Identification of active-site amino acid residues in the Chiba virus 3C-like protease

The 3C-like protease of the Chiba virus, a Norwalk-like virus, is one of the chymotrypsin-like proteases. To identify active-site amino acid residues in this protease, 37 charged amino acid residues and a putative nucleophile, Cys139, within the GDCG sequence were individually replaced with Ala in the 3BC precursor, followed by expression in Escherichia coli, where the active 3C-like protease would cleave 3BC into 3B (VPg) and 3C (protease). Among 38 Ala mutants, 7 mutants (R8A, H30A, K88A, R89A, D138A, C139A, and H157A) completely or nearly completely lost the proteolytic activity. Cys139 was replaceable only with Ser, suggesting that an SH or OH group in the less bulky side chain was required for the side chain of the residue at position 139. His30, Arg89, and Asp138 could not be replaced with any other amino acids. Although Arg8 was also not replaceable for the 3B/3C cleavage and the 3C/3D cleavage, the N-terminal truncated mutant devoid of Arg8 significantly cleaved 3CD into 3C and 3D (polymerase), indicating that Arg8 itself was not directly involved in the proteolytic cleavage. As for position 88, a positively charged residue was required because the Arg mutant showed significant activity. As deduced by the X-ray structure of the hepatitis A virus 3C protease, Arg8, Lys88, and Arg89 are far away from the active site, and the side chain of Asp138 is directed away from the active site. Therefore, these are not catalytic residues. On the other hand, all of the mutants of His157 in the S1 specificity pocket tended to retain very slight activity, suggesting a decreased level of substrate recognition. These results, together with a sequence alignment with the picornavirus 3C proteases, indicate that His30 and Cys139 are active-site residues, forming a catalytic dyad without a carboxylate directly participating in the proteolysis.     

Importance of p12 protein in Mason-Pfizer monkey virus assembly and infectivity.

Mason-Pfizer monkey virus (M-PMV) represents the prototype type D retrovirus, characterized by the assembly of intracytoplasmic A-type particles within the infected-cell cytoplasm. These immature particles migrate to the plasma membrane, where they are released by budding. The gag gene of M-PMV encodes a novel protein, p12, just 5' of the major capsid protein (CA) p27 on the polyprotein precursor. The function of p12 is not known, but an equivalent protein is found in mouse mammary tumor virus and is absent from the type C retroviruses. In order to determine whether the p12 protein plays a role in the intracytoplasmic assembly of capsids, a series of in-frame deletion mutations were constructed in the p12 coding domain. The mutant gag genes were expressed by a recombinant vaccinia virus-T7 polymerase-based system in CV-1 cells or in the context of the viral genome in COS-1 cells. In both of these high-level expression systems, mutant Gag precursors were competent to assemble but were not infectious. In contrast, when stable transfectant HeLa cell lines were established, assembly of the mutant precursors into capsids was drastically reduced. Instead, the polyprotein precursors remained predominantly soluble in the cytoplasm. These results show that while p12 is not required for the intracytoplasmic assembly of M-PMV capsids, under the conditions of low-level protein biosynthesis seen in virus-infected cells, it may assist in the stable association of polyprotein precursors for capsid assembly. Moreover, the presence of the p12 coding domain is absolutely required for the infectivity of M-PMV virions.     

Preassembled capsids of type D retroviruses contain a signal sufficient for targeting specifically to the plasma membrane.

The capsids of Mason-Pfizer monkey virus (M-PMV), an immunosuppressive type D retrovirus, are preassembled in the infected cell cytoplasm and are then transported to the plasma membrane, where they are enveloped in a virus glycoprotein-containing lipid bilayer. The role of viral glycoprotein in intracellular transport of M-PMV capsids was investigated with a spontaneous mutant (5A) of M-PMV, which we show here to be defective in envelope glycoprotein biosynthesis. DNA sequence analysis of the env gene of mutant 5A reveals a single nucleotide deletion in the middle of the gene, which results in the synthesis of a truncated form of the envelope glycoprotein. Evidence is presented showing that the mutant glycoprotein is not expressed at the cell surface but is retained in the endoplasmic reticulum. Normal levels of gag-pro-pol precursor polyproteins are made and processed in mutant genome-transfected cells, and high levels of noninfectious particles lacking viral glycoprotein are released with normal kinetics into the culture medium. No intracisternal budding of capsids is observed. We conclude that viral glycoprotein is required neither for targeting preassembled capsids of M-PMV to the plasma membrane for final maturation nor for the budding process. Since the presence or absence of M-PMV glycoprotein at the site of budding does not affect the efficiency or kinetics of the targeting process, the preassembled capsid of M-PMV, in contrast to those of intracisternal type A particles, appears to have an intrinsic signal for intracellular transport to the plasma membrane.     

A Mason-Pfizer Monkey Virus Gag-GFP Fusion Vector Allows Visualization of Capsid Transport in Live Cells and Demonstrates a Role for Microtubules

Immature capsids of the Betaretrovirus, Mason-Pfizer Monkey virus (M-PMV), are assembled in the pericentriolar region of the cell, and are then transported to the plasma membrane for budding. Although several studies, utilizing mutagenesis, biochemistry, and immunofluorescence, have defined the role of some viral and host cells factors involved in these processes, they have the disadvantage of population analysis, rather than analyzing individual capsid movement in real time. In this study, we created an M-PMV vector in which the enhanced green fluorescent protein, eGFP, was fused to the carboxyl-terminus of the M-PMV Gag polyprotein, to create a Gag-GFP fusion that could be visualized in live cells. In order to express this fusion protein in the context of an M-PMV proviral backbone, it was necessary to codon-optimize gag, optimize the Kozak sequence preceding the initiating methionine, and mutate an internal methionine codon to one for alanine (M100A) to prevent internal initiation of translation. Co-expression of this pSARM-Gag-GFP-M100A vector with a WT M-PMV provirus resulted in efficient assembly and release of capsids. Results from fixed-cell immunofluorescence and pulse-chase analyses of wild type and mutant Gag-GFP constructs demonstrated comparable intracellular localization and release of capsids to untagged counterparts. Real-time, live-cell visualization and analysis of the GFP-tagged capsids provided strong evidence for a role for microtubules in the intracellular transport of M-PMV capsids. Thus, this M-PMV Gag-GFP vector is a useful tool for identifying novel virus-cell interactions involved in intracellular M-PMV capsid transport in a dynamic, real-time system.     

Analysis of Mason-Pfizer monkey virus Gag domains required for capsid assembly in bacteria: role of the N-terminal proline residue of CA in directing particle shape

Mason-Pfizer monkey virus (M-PMV) preassembles immature capsids in the cytoplasm prior to transporting them to the plasma membrane. Expression of the M-PMV Gag precursor in bacteria results in the assembly of capsids indistinguishable from those assembled in mammalian cells. We have used this system to investigate the structural requirements for the assembly of Gag precursors into procapsids. A series of C- and N-terminal deletion mutants progressively lacking each of the mature Gag domains (matrix protein [MA]-pp24/16-p12-capsid protein [CA]-nucleocapsid protein [NC]-p4) were constructed and expressed in bacteria. The results demonstrate that both the CA and the NC domains are necessary for the assembly of macromolecular arrays (sheets) but that amino acid residues at the N terminus of CA define the assembly of spherical capsids. The role of these N-terminal domains is not based on a specific amino acid sequence, since both MA-CA-NC and p12-CA-NC polyproteins efficiently assemble into capsids. Residues N terminal of CA appear to prevent a conformational change in which the N-terminal proline plays a key role, since the expression of a CA-NC protein lacking this proline results in the assembly of spherical capsids in place of the sheets assembled by the CA-NC protein.     

Closing of the flaps of HIV-1 protease induced by substrate binding: a model of a flap closing mechanism in retroviral aspartic proteases

The active site of aspartic proteases is covered by one or more flaps, which control access to the active site and play a significant role in the binding of the substrate. An extensive conformational change of the flaps takes place upon binding of substrate to the active site. A long molecular dynamics simulation was performed on the complex consisting of a peptide (CA-p2) from a natural substrate cleavage site of the gag/pol polyprotein placed in the active site of HIV-1 protease (PR) with an open flap conformation. During the simulation, the substrate induced the closing of the flaps into the closed conformation in an asymmetrical way through a hydrophobic intermediate state cluster. The nature of the residues of HIV-1 PR identified to be important in the flap closing mechanism is conserved across known structures of retroviral aspartic proteases family. The flap closing mechanism described in HIV-1 PR is proposed to be a general model for flap closing in retroviral aspartic proteases.     

Folded monomer of HIV-1 protease

The mature human immunodeficiency virus type 1 protease rapidly folds into an enzymatically active stable dimer, exhibiting an intricate interplay between structure formation and dimerization. We now show by NMR and sedimentation equilibrium studies that a mutant protease containing the R87K substitution (PR(R87K)) within the highly conserved Gly(86)-Arg(87)-Asn(88) sequence forms a monomer with a fold similar to a single subunit of the dimer. However, binding of the inhibitor DMP323 to PR(R87K) produces a stable dimer complex. Based on the crystal structure and our NMR results, we postulate that loss of specific interactions involving the side chain of Arg(87) destabilizes PR(R87K) by perturbing the inner C-terminal beta-sheet (residues 96-99 from each monomer), a region that is sandwiched between the two beta-strands formed by the N-terminal residues (residues 1-4) in the mature protease. We systematically examined the folding, dimerization, and catalytic activities of mutant proteases comprising deletions of either one of the terminal regions (residues 1-4 or 96-99) or both. Although both N- and C-terminal beta-strands were found to contribute to dimer stability, our results indicate that the inner C-terminal strands are absolutely essential for dimer formation. Knowledge of the monomer fold and regions critical for dimerization may aid in the rational design of novel inhibitors of the protease to overcome the problem of drug resistance.     

Mutational and structural studies aimed at characterizing the monomer of HIV-1 protease and its precursor

An experimental protocol for folding the mature human immunodeficiency virus-1 (HIV-1) protease is presented that facilitates NMR studies at a low protein concentration of approximately 20 micoM. Under these conditions, NMR spectra show that the mature protease lacking its terminal beta-sheet residues 1-4 and 96-99 (PR(5-95)) exhibits a stable monomer fold spanning the region 10-90 that is similar to that of the single subunit of the wild-type dimer and the dimer bearing a D25N mutation (PR(D25N)). Urea-induced unfolding monitored both by changes in (1)H-(15)N heteronuclear single quantum correlation spectra and by protein fluorescence indicates that although PR(5-95) monomer displays a transition profile similar to that of the PR(D25N) dimer (50% unfolded (U(50)) = approximately 1.9 M), extending the protease with 4 residues (SFNF) of its N-terminally flanking sequence in the Gag-Pol precursor ((SFNF)PR(D25N)) decreases the stability of the fold (U(50) = approximately 1.5 M). Assigned backbone chemical shifts were used to elucidate differences in the stability of the PR(T26A) (U(50) = 2.5 M) and (SFNF)PR(D25N) monomers and compared with PR(D25N/T26A) monomer. Discernible differences in the backbone chemical shifts were observed for N-terminal protease residues 3-6 of (SFNF)PR(D25N) that may relate to the increase in the equilibrium dissociation constant (K(d)) and the very low catalytic activity of the protease prior to its autoprocessing at its N terminus from the Gag-Pol precursor.     

Comparison of the crystal structures and intersubunit interactions of human immunodeficiency and Rous sarcoma virus proteases

The crystal structures of the proteases (PRs) encoded by the Rous sarcoma virus (RSV) and the human immunodeficiency virus (HIV) have been compared. The crystallographic monomer of HIV PR superimposes on the two crystallographically independent subunits of the RSV PR dimer with root mean square deviations of 1.45 and 1.55 A for 86 and 88 common C alpha atoms, respectively. There is a conserved structural core consisting of seven beta-strands forming two perpendicular layers, a helix, and the amino- and carboxyl-terminal beta-strands. PRs from related retroviruses fold into similar structures with surface turns of variable length between the beta-strands. Both HIV and RSV PR dimers have significant subunit-subunit interactions in three regions: the "firemen's grip" at the active site; the salt bridges involving Arg8, Asp29, and Arg87 of HIV PR; and the termini of the two subunits, which form a four-stranded antiparallel beta-sheet. The specific interactions of the termini differ in the two PRs. The carboxyl termini, residues 96-99 of HIV PR and residues 119-124 of RSV PR, contribute approximately 50% of the intersubunit ionic and hydrogen bond interactions and approximately 45% of the buried surface area involved in dimer formation. This information may be useful in the design of site-directed mutations or inhibitors of dimer formation.     

Use of protein unfolding studies to determine the conformational and dimeric stabilities of HIV-1 and SIV proteases.

The free energies of dimer dissociation of the retroviral proteases (PRs) of human immunodeficiency virus type 1 (HIV-1) and simian immunodeficiency virus (SIV) were determined by measuring the effects of denaturants on the protein fluorescence upon the unfolding of the enzymes. HIV-1 PR was more stable to denaturation by chaotropes and extremes of pH and temperature than SIV PR, indicating that the former enzyme has greater conformational stability. The urea unfolding curves of both proteases were sigmoidal and single phase. The midpoints of the transition curves increased with increasing protein concentrations. These data were best described by and fitted to a two-state model in which folded dimers were in equilibrium with unfolded monomers. This denaturation model conforms to cases in which protein unfolding and dimer dissociation are concomitant processes in which folded monomers do not exist [Bowie, J. U., & Sauer, R. T. (1989) Biochemistry 28, 7140-7143]. Accordingly, the free energies of unfolding reflect the stabilities of the protease dimers, which for HIV-1 PR and SIV PR were, respectively, delta GuH2O = 14 +/- 1 kcal/mol (Ku = 39 pM) and 13 +/- 1 kcal/mol (Ku = 180 pM). The binding of a tight-binding, competitive inhibitor greatly stabilized HIV-1 PR toward urea-induced unfolding (delta GuH2O = 19.3 +/- 0.7 kcal/mol, Ku = 7.0 fM). There were also profound effects caused by adverse pH on the protein conformation for both HIV-1 PR and SIV PR, resulting in unfolding at pH values above and below the respective optimal ranges of 4.0-8.0 and 4.0-7.0     

Kinetics of the dimerization of retroviral proteases: the "fireman's grip" and dimerization

All retroviral proteases belong to the family of aspartic proteases. They are active as homodimers, each unit contributing one catalytic aspartate to the active site dyad. An important feature of all aspartic proteases is a conserved complex scaffold of hydrogen bonds supporting the active site, called the "fireman's grip," which involves the hydroxyl groups of two threonine (serine) residues in the active site Asp-Thr(Ser)-Gly triplets. It was shown previously that the fireman's grip is indispensable for the dimer stability of HIV protease. The retroviral proteases harboring Ser in their active site triplet are less active and, under natural conditions, are expressed in higher enzyme/substrate ratio than those having Asp-Thr-Gly triplet. To analyze whether this observation can be attributed to the different influence of Thr or Ser on dimerization, we prepared two pairs of the wild-type and mutant proteases from HIV and myeloblastosis-associated virus harboring either Ser or Thr in their Asp-Thr(Ser)-Gly triplet. The equilibrium dimerization constants differed by an order of magnitude within the relevant pairs. The proteases with Thr in their active site triplets were found to be approximately 10 times more thermodynamically stable. The dimer association contributes to this difference more than does the dissociation. We propose that the fireman's grip might be important in the initial phases of dimer formation to help properly orientate the two subunits of a retroviral protease. The methyl group of threonine might contribute significantly to fixing such an intermediate conformation.