Antibody fragment separations by capillary zone electrophoresis

This study investigated methods of improving the separation and identification of an IgA antibody, McPC603, and its pepsin fragments. The problem presented by purification of antibody fragments (Fabs) and the antibody light chain required accurate and informative analysis of highly hydrophobic proteins, which can polymerize and fold to form secondary structures. Capillary zone electrophoresis (CZE) permits the separation of peptides and small proteins by a method which is orthogonal to the traditional method of reversed-phase HPLC. To facilitate planned studies of the antibody's biological activity, our buffer composition was kept as simple as possible. During CZE analysis, if the buffer pH is below the isoelectric point of the protein, or the protein is large (with a heterogeneous distribution of surface charges), it can irreversibly bind to the capillary wall unless the capillary is coated. We found that C₁-coatings in RP-capillaries at pH 9.5 adequately prevented the antibody fragments from binding to the wall. However, the coating did not remain stable at such high pH, so different conditions were sought. We achieved adequate separations in several buffers at nearly physiological pH, in a bare silica capillary which had been coated once with a soluble cationic polymer coating (Micro-Coat applied during column conditioning). Antibody electropherograms changed depending on the type of inorganic buffer salt used in a separation. Phosphate binds to the antigen-binding site of the IgA with low affinity, and interesting effects were observed in separations using phosphate buffer. These effects will be discussed.     

Determination of meningococcal polysaccharides by capillary zone electrophoresis

Meningococcal polysaccharides are medically important molecules and are the active components of vaccines against Neisseria meningiditis serogroups A, C, W135, and Y. This study demonstrates that free solution capillary zone electrophoresis (CZE) using simple phosphate/borate separation buffers is capable of separating intact, native polysaccharides from these four serogroups. Separation appeared to be robust with respect to variations in test conditions and behaved in expected ways with respect to changes in temperature, ionic strength, and addition of an organic modifier. Serogroups W135 and Y are composed of sialic acid residues alternating with either galactose or glucose, respectively. Separation of these serogroups could be achieved using phosphate buffer and was therefore not dependent on differential complexation with borate. Addition of sodium dodecyl sulfate to the separation buffer (i.e., MEKC) resulted in peak splitting for all four serogroups. Changes in polysaccharide size did not affect migration time for the size range examined, but serogroup C polysaccharide (a sialic acid homopolymer) was separable from sialic acid monosaccharide. CZE quantification of multiple lots of each of the four serogroups was compared to wet chemical determination by phosphorus or sialic acid measurement. Results from CZE determination showed good agreement with the wet chemical methods.     

Capillary zone electrophoresis of insulin and growth hormone

The separation power of capillary zone electrophoresis was examined using highly purified and well-characterized biosynthetic human insulin, growth hormone, their derivatives, and related proteins. Mixtures of proteins were chosen to illustrate practical applications of this technique. Proteins differing slightly in structure, but equivalent in net charge, were not completely separated. Degradation of insulin by dilute acid treatment was followed by capillary zone electrophoresis, native polyacrylamide gel electrophoresis, and reversed-phase liquid chromatography. Excellent correlation was observed between these techniques. Simple equipment requirements and analysis times on the order of 10 min make capillary zone electrophoresis attractive for analytical protein separations.     

Synergism of capillary isotachophoresis and capillary zone electrophoresis

The combination of capillary isotachophoresis and capillary zone electrophoresis may enhance greatly the performance of analytical capillary electrophoresis with respect to both separation power and the concentration sensitivity. The concentrating effects and the separation power of isotachophoresis allow the analysis of diluted samples and the elimination of interferences due to bulk components. The separation process of zone electrophoresis enables one to resolve the stack of trace analytes and detect the resulting individual zones with high sensitivity. The transition of isotachophoresis into zone electrophoresis plays the key role in the overall performance of this hyphenated technique. This article describes the dynamics of the conversion of isotachophoresis into zone electrophoretic mode and shows that the key role is played by the segments of the leading and terminating zones from the isotachophoretic stage. The magnitude of these segments directly effects the detection time as well as the separation width of the peaks of analytes. It is shown that these effects are also important in the analyses by capillary zone electrophoresis where isotachophoresis is induced by the sample itself. Finally, the paper presents a list of recommended, user-friendly, electrolyte systems which enable one to simply predict the performance of the combination isotachophoresis-zone electrophoresis.     

Application of capillary zone electrophoresis in cephalosporin analysis

Cephalosporins have structures and antibiotic activity similar to those of penicillins which represent a class of compounds with closely related structures. Most of the cephalosporins contain aromatic groups and show distinctive UV spectra. Separating the different types of cephalosporins is a challenging task for HPLC, but the resolving power of capillary zone electrophoresis (CZE) makes this separation fast and simple. The present study reports the application of CZE for cephalosporin analysis and the separation of cephalosporins from plasma. Both field strength and temperature were shown to influence the plate number. The influence of injection time on the peak height was studied. Furthermore, the influence of pH value on the separation of cephalosporins by CZE was investigated. The low sample amount required and the relatively short analysis time are the main advantages of this method.     

Pharmaceutical-induced cell apoptosis characterized by capillary zone electrophoresis

Capillary zone electrophoresis (CZE) with a non-gel-sieving system was employed to characterize actinomycin D-induced cell apoptosis by measuring cellular DNA damage, termed DNA ladder, which proved to be thoroughly different from the DNA damage pattern of cell necrosis. The results by CZE analyses were identical to those obtained by conventional slab gel electrophoresis, demonstrating that CZE would be a reliable and more convenient technique for the identification of cell death with advantages of higher performance, high-speed, minute sample requirement, and advanced automation.     

Determination of protein charge by capillary zone electrophoresis

The feasibility of employing classical electrophoresis theory to determine the net charge (valence) of proteins by capillary zone electrophoresis is illustrated in this paper. An outline of a procedure to facilitate the interpretation of mobility measurements is demonstrated by its application to a published mobility measurement for Staphylococcal nuclease at pH 8.9 that had been obtained by capillary zone electrophoresis. The significantly higher valence of +7.5 (cf. 5.6 from the same series of measurements) that has been reported on the basis of a "charge ladder" approach for charge determination signifies the likelihood that the latter generic approach may be prone to error arising from nonconformity of the experimental system with an inherent assumption that chemical modification or mutation of amino acid residues has no effect on the overall three-dimensional size and shape of the protein.     

Monitoring of chemotherapy-induced proteinuria using capillary zone electrophoresis

Capillary zone electrophoresis (CZE) was investigated for its suitability to monitor proteinuria occurring during nephrotoxic drug therapy. Urine samples of tumor patients receiving chemotherapy consisting of carboplatin, etoposide, and ifosfamide were concentrated and desalted in microconcentrators and analyzed in two different alkaline CZE buffer systems. Reduction of electroosmotic flow (EOF) by the addition of putrescine increased the number of resolved protein peaks. Both CZE methods were linear between 2.5 and 50 μg/ml, exhibited satisfactory precision (relative standard deviation <10%) and were suitable for monitor the time course of proteinuria after chemotherapy administration. In contrast to sodium dodecyl sulfate–polyacrylamide gel electrophoresis (SDS–PAGE), CZE detected interindividual differences in protein patterns. Whereas these differences hampered a direct quantification of proteins in urine, they may contain information on the type or extent of kidney damage.     

An assay for angiotensin-converting enzyme using capillary zone electrophoresis

A sensitive and rapid method was developed for angiotensin-converting enzyme (ACE) activity determination by capillary zone electrophoresis. Hippuryl-l-histidyl-l-leucine, a synthetic tripeptide, was used as the ACE-specific substrate. Capillary zone electrophoresis was employed to separate the products of the enzymatic reaction and the ACE activity was determined by quantification of hippuric acid, a result of the enzymatic reaction on the tripeptide. The capillary electrophoresis was performed in a 27 cm x 75 micrometer i.d. fused-silica capillary using 200 mM boric acid-borate buffer (pH 9.0) as a run buffer with an applied voltage of 8.1 kV at a capillary temperature of 23 degrees C. The electrophoresis was monitored at 228 nm. Each electrophoretic run requires only a nanoliter of the enzymatic reactant solution, at only 6 min, rendering a powerful tool for the ACE assay.     

Micropreparative capillary zone electrophoresis of recombinant human interleukin-3

Micropreparative capillary zone electrophoresis of recombinant human interleukin-3 (rhIL-3) in untreated fused silica is presented. Results show that nanogram quantities of rhIL-3 can be collected off the capillary and then identified by amino acid sequencing and SDS-gel electrophoresis.     

Determination of grepafloxacin and clinafloxacin by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis determination method with UV detection of grepafloxacin and clinafloxacin has been developed. The separation was performed in 35 mM borate-35 mM phosphate buffer solution (pH 8.6), containing 6% (v/v) of acetonitrile. Analyses were realised using fused-silica capillaries (57 cm length x 75 microm I.D.) and the operating conditions were: 15 kV applied voltage, 30 degrees C and detection at 279 nm. Piromidic acid was used as an internal standard. The linear concentration range of application was 1.0-120.0 microg ml(-1) for both compounds, with a detection limit of 0.2 microg ml(-1) for grepafloxacin and 0.3 microg ml(-1) for clinafloxacin. The analysis yielded good reproducibility (RSD between 3.37 and 1.74%). It was applied to the determination of grepafloxacin and clinafloxacin in human and rat urine samples. The method was validated using HPLC as a reference method. Recovery levels were between 94.5 and 103%.