Development of F1 hybrid population and the high-density linkage map for European aspen (<Emphasis Type="Italic">Populus tremula</Emphasis> L.) using RADseq technology

Background

Restriction-site associated DNA sequencing (RADseq) technology was recently employed to identify a large number of single nucleotide polymorphisms (SNP) for linkage mapping of a North American and Eastern Asian Populus species. However, there is also the need for high-density genetic linkage maps for the European aspen (P. tremula) as a tool for further mapping of quantitative trait loci (QTLs) and marker-assisted selection of the Populus species native to Europe.

Results

We established a hybrid F1 population from the cross of two aspen parental genotypes diverged in their phenological and morphological traits. We performed RADseq of 122 F1 progenies and two parents yielding 15,732 high-quality SNPs that were successfully identified using the reference genome of P. trichocarpa. 2055 SNPs were employed for the construction of maternal and paternal linkage maps. The maternal linkage map was assembled with 1000 SNPs, containing 19 linkage groups and spanning 3054.9 cM of the genome, with an average distance of 3.05 cM between adjacent markers. The paternal map consisted of 1055 SNPs and the same number of linkage groups with a total length of 3090.56 cM and average interval distance of 2.93 cM. The linkage maps were employed for QTL mapping of one-year-old seedlings height variation. The most significant QTL (LOD = 5.73) was localized to LG5 (96.94 cM) of the male linkage map, explaining 18% of the phenotypic variation.

Conclusions

The set of 15,732 SNPs polymorphic in aspen and high-density genetic linkage maps constructed for the P. tremula intra-specific cross will provide a valuable source for QTL mapping and identification of candidate genes facilitating marker-assisted selection in European aspen.

     

Linkage mapping in prairie cordgrass (<Emphasis Type="Italic">Spartina pectinata</Emphasis> Link) using genotyping-by-sequencing

Prairie cordgrass (Spartina pectinata Link) is a polyploid Chloridoid grass with tetraploid (2n = 40), hexaploid (2n = 60), and octoploid (2n = 80) cytotypes and is a potential dedicated energy crop with promising yields in marginal environments. Efforts to breed prairie cordgrass are currently hampered by the lack of a linkage map, the lack of a Chloridoid reference genome, and the lack of information on inheritance patterns (disomic versus polysomic). Genotyping-by-sequencing (GBS) was applied to a population of 85 progenies from a reciprocal cross of heterozygous tetraploid parents. A total of 26,418 SNPs were discovered, with a distribution of allele frequencies suggesting disomic inheritance. A filtered set of 3034 single-dose, high-coverage SNPs was used for pseudo-testcross mapping with 63 progenies, resulting in two parental maps of 20 linkage groups containing 1522 and 1016 SNPs and a nearly 1:1 ratio of coupling to repulsion phase linkages, again suggesting disomic inheritance. Genomic contigs from tef, another Chloridoid grass, were used as a bridge to associate genetic markers in prairie cordgrass with unique positions in the sorghum genome, providing a glimpse into synteny between Chloridoids and other grasses. GBS enabled rapid generation of a linkage map that will aid in future breeding and genomics efforts in prairie cordgrass.     

Construction of a high-density SNP genetic map in flue-cured tobacco based on SLAF-seq

Tobacco (Nicotiana tabacum L., 2n = 48) is an important agronomic crop and model plant. Flue-cured tobacco is the most important type and accounts for approximately 80 % of tobacco production worldwide. The low genetic diversity of flue-cured tobacco impedes the construction of a high-density genetic linkage map using simple sequence repeat (SSR) markers and warrants the exploitation of single nucleotide polymorphic (SNP) markers from genomic regions. In this article, initially using specific locus-amplified fragment sequencing, we discovered 10,891 SNPs that were subsequently used as molecular markers for genetic map construction. Combined with SSR markers, a final high-density genetic map was generated containing 4215 SNPs and 194 SSRs distributed on 24 linkage groups (LGs). The genetic map was 2662.43 cM in length, with an average distance of 0.60 cM between adjacent markers. Furthermore, by mapping the SNP markers to the ancestral genomes of Nicotiana tomentosiformis and Nicotiana sylvestris, a large number of genome rearrangements were identified as occurring after the polyploidization event. Finally, using this novel integrated map and mapping population, two major quantitative trait loci (QTLs) were identified for flue-curing and mapped to the LG6 of tobacco. This is the first report of SNP markers and a SNP-based linkage map being developed in tobacco. The high-density genetic map and QTLs related to tobacco curing will support gene/QTL fine mapping, genome sequence assembly and molecular breeding in tobacco.     

Construction of an ultra-high density consensus genetic map,and enhancement of the physical map from genome sequencing in <Emphasis Type="Italic">Lupinus angustifolius</Emphasis>

Key message

An ultra-high density genetic map containing 34,574 sequence-defined markers was developed in Lupinus angustifolius. Markers closely linked to nine genes of agronomic traits were identified. A physical map was improved to cover 560.5 Mb genome sequence.

Abstract

Lupin (Lupinus angustifolius L.) is a recently domesticated legume grain crop. In this study, we applied the restriction-site associated DNA sequencing (RADseq) method to genotype an F₉ recombinant inbred line population derived from a wild type × domesticated cultivar (W × D) cross. A high density linkage map was developed based on the W × D population. By integrating sequence-defined DNA markers reported in previous mapping studies, we established an ultra-high density consensus genetic map, which contains 34,574 markers consisting of 3508 loci covering 2399 cM on 20 linkage groups. The largest gap in the entire consensus map was 4.73 cM. The high density W × D map and the consensus map were used to develop an improved physical map, which covered 560.5 Mb of genome sequence data. The ultra-high density consensus linkage map, the improved physical map and the markers linked to genes of breeding interest reported in this study provide a common tool for genome sequence assembly, structural genomics, comparative genomics, functional genomics, QTL mapping, and molecular plant breeding in lupin.

     

Construction of a genome-anchored,high-density genetic map for melon (<Emphasis Type="Italic">Cucumis melo</Emphasis> L.) and identification of <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> f. sp. <Emphasis Type="Italic">melonis</Emphasis> race 1 resistance QTL

Key message

Four QTLs and an epistatic interaction were associated with disease severity in response to inoculation with Fusarium oxysporum f. sp. melonis race 1 in a recombinant inbred line population of melon.

Abstract

The USDA Cucumis melo inbred line, MR-1, harbors a wealth of alleles associated with resistance to several major diseases of melon, including powdery mildew, downy mildew, Alternaria leaf blight, and Fusarium wilt. MR-1 was crossed to an Israeli cultivar, Ananas Yok’neam, which is susceptible to all of these diseases, to generate a recombinant inbred line (RIL) population of 172 lines. In this study, the RIL population was genotyped to construct an ultra-dense genetic linkage map with 5663 binned SNPs anchored to the C. melo genome and exhibits the overall high quality of the assembly. The utility of the densely genotyped population was demonstrated through QTL mapping of a well-studied trait, resistance to Fusarium wilt caused by Fusarium oxysporum f. sp. melonis (Fom) race 1. A major QTL co-located with the previously validated resistance gene Fom-2. In addition, three minor QTLs and an epistatic interaction contributing to Fom race 1 resistance were identified. The MR-1 × AY RIL population provides a valuable resource for future QTL mapping studies and marker-assisted selection of disease resistance in melon.

     

High-density linkage maps for <Emphasis Type="Italic">Citrus sunki</Emphasis> and <Emphasis Type="Italic">Poncirus trifoliata</Emphasis> using DArTseq markers

The construction of a high-resolution genetic map of citrus would be of great value to breeders and to associate genomic regions with characteristics of agronomic interest. Here, we describe a novel high-resolution map of citrus using a population derived from a controlled cross between Citrus sunki (female parent) and Poncirus trifoliata (male parent). The genetic linkage maps were constructed using DArTseq markers and a pseudo-testcross strategy; only markers showing the expected segregation ratio were considered. To investigate synteny, all markers from both linkage maps were aligned with the genome of Citrus sinensis. The C. sunki map has a total of 2778 molecular markers and a size of 2446.6 cM, distributed across ten linkage groups. The map of P. trifoliata was built with 3084 markers distributed in a total of nine linkage groups, with a total size of 2411.6 cM. These maps are the most saturated linkage maps available for C. sunki and P. trifoliata and have high genomic coverage. We also demonstrated that the maps reported here are closely related to the reference genome of C. sinensis.     

A genome-wide association study on growth traits in orange-spotted grouper (<Emphasis Type="Italic">Epinephelus coioides</Emphasis>) with RAD-seq genotyping

The orange-spotted grouper, Epinephelus coioides, is one of the most popular fish in China and Southeast Asian countries because of its important economic value. However, molecular mechanism underlying the growth of orange-spotted grouper has never been fully understood. Herein, we performed a genome-wide association study (GWAS) on a natural population of 198 individuals aiming to screen the whole genome of orange-spotted grouper for identification of growth-related loci by restrictionsite associated DNA sequencing. In this research, 261,366 single nucleotide polymorphisms (SNPs) were developed, in which 110 SNPs were identified to be correlated with growth and 20 SNPs were further confirmed to be associated with both body weight and total length. From these identified SNPs, we annotated a total of 34 genes, including adgrb2, csnkza1, cers5, col22a1, creb5, dnd1, dzank1, dnai1, npy2r, fat3, lrrk2, lrp5, map3k9, and so on. Among these candidate genes, npy2r (neuropeptide Y receptor Y2) was reported to play a critical role in growth of the orange-spotted grouper. In addition, population structure, principal component analysis, kinship matrix and linkage disequilibrium were examined to verify the accuracy and reliability of our GWAS results. Our data will also provide a valuable genetic resource for further marker-assisted selection program to improve growth quality in groupers.     

A high-density linkage map with 2560 markers and its application for the localization of the male-sterile genes <Emphasis Type="Italic">ms3</Emphasis> and <Emphasis Type="Italic">ms4</Emphasis> in <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> D. Don

Cryptomeria japonica pollinosis is one of the most serious allergic diseases in Japan; this is a social problem because C. japonica is the most important Japanese forestry species. In order to reduce the amount of pollen dispersed, breeding programs using trees with male-sterile genes have been implemented. High-density linkage maps with stable ordering of markers facilitate the localization of male-sterile genes and the construction of partial linkage maps around them in order to develop markers for use in marker-assisted selection. In this study, a high-density linkage map for C. japonica with 2560 markers was constructed. The observed map length was 1266.2 cM and the mean distance between adjacent markers was 0.49 cM. Using information from this high-density map, we newly located two male-sterile genes (ms3 and ms4) on the first and fourth linkage groups, respectively, and constructed partial linkage maps around these loci. We also constructed new partial linkage maps around the ms1 and ms2 loci using additional SNP markers. The closest markers to the ms1, ms2, ms3, and ms4 male-sterile loci were estSNP04188 (1.8 cM), estSNP00695 (7.0 cM), gSNP05415 (3.1 cM), and estSNP01408 (7.0 cM) respectively. These results allowed us to develop SNP markers tightly linked to the male sterile genes for use in MAS; this will accelerate the future isolation of these genes by map-based cloning approaches.     

Genetic identification of SNP markers linked to a new grape phylloxera resistant locus in <Emphasis Type="Italic">Vitis cinerea</Emphasis> for marker-assisted selection

Background

Grape phylloxera (Daktulosphaira vitifoliae Fitch) is a major insect pest that negatively impacts commercial grapevine performance worldwide. Consequently, the use of phylloxera resistant rootstocks is an essential component of vineyard management. However, the majority of commercially available rootstocks used in viticulture production provide limited levels of grape phylloxera resistance, in part due to the adaptation of phylloxera biotypes to different Vitis species. Therefore, there is pressing need to develop new rootstocks better adapted to specific grape growing regions with complete resistance to grape phylloxera biotypes.

Results

Grapevine rootstock breeding material, including an accession of Vitis cinerea and V. aestivalis, DRX55 ([M. rotundifolia x V. vinifera] x open pollinated) and MS27-31 (M. rotundifolia specific hybrid), provided complete resistance to grape phylloxera in potted plant assays. To map the genetic factor(s) of grape phylloxera resistance, a F₁ V. cinerea x V. vinifera Riesling population was screened for resistance. Heritability analysis indicates that the V. cinerea accession contained a single allele referred as RESISTANCE TO DAKTULOSPHAIRA VITIFOLIAE 2 (RDV2) that confers grape phylloxera resistance. Using genetic maps constructed with pseudo-testcross markers for V. cinerea and Riesling, a single phylloxera resistance locus was identified in V. cinerea. After validating SNPs at the RDV2 locus, interval and linkage mapping showed that grape phylloxera resistance mapped to linkage group 14 at position 16.7 cM.

Conclusion

The mapping of RDV2 and the validation of markers linked to grape phylloxera resistance provides the basis to breed new rootstocks via marker-assisted selection that improve vineyard performance.

     

Single nucleotide polymorphism markers for rapid detection of the <Emphasis Type="Italic">Rsv4</Emphasis> locus for soybean mosaic virus resistance in diverse germplasm

Soybean mosaic virus (SMV) causes a substantial decrease in soybean yield and reduction of seed quality. The most effective management strategy to control the virus is the deployment of host resistance. Seven SMV strains and three independent multi-allelic loci for SMV resistance have been identified previously. The goal of this research was to detect single nucleotide polymorphisms (SNPs) associated with SMV resistance at the Rsv4 locus. Ten soybean accessions, with confirmed resistance genes, were used for sequencing the candidate gene Glyma.02g121400. Alignment of these sequences revealed three SNPs displaying 100% consistency for genotypes carrying the Rsv4 gene. These SNPs were applied for a rapid screen of diverse soybean germplasm using the Sequenom iPLEX Gold platform, phenotyped with SMV-G1 and G7 strains to determine phenotype and classified into several groups carrying the proposed R-gene. The population of V94-5152 (Rsv4) × Lee 68 (rsv) was screened using novel SNPs to create a genetic map with improved resolution to determine the location of the Rsv4. To observe the recombination frequencies within the population, three additional SNPs on both sides of the Glyma.02g121400 gene were added. A linkage map revealed a distance of 3.6 cM between the Rsv4 locus and the closest SNP, thus shifting the putative Rsv4 region downstream on chromosome 2. With this region, five candidate genes have been proposed. The genomic position of the discovered SNPs, linked to the Rsv4, could increase screening precision and accelerate breeding efforts to develop multi-strain-resistant crops.     

Construction of a sequence-based bin map and mapping of QTLs for downy mildew resistance at four developmental stages in Chinese cabbage (<Emphasis Type="Italic">Brassica rapa</Emphasis> L. ssp. <Emphasis Type="Italic">pekinensis</Emphasis>)

Specific-locus amplified fragment sequencing is a high-resolution method for genetic mapping, genotyping, and single nucleotide polymorphism (SNP) marker discovery. Previously, a major QTL for downy mildew resistance, BraDM, was mapped to linkage group A08 in a doubled-haploid population derived from Chinese cabbage lines 91–112 and T12–19. The aim of the present study was to improve the linkage map and identify the genetic factors involved in downy mildew resistance. We detected 53,692 high quality SLAFs, of which 7230 were polymorphic, and 3482 of the polymorphic markers were used in genetic map construction. The final map included 1064 bins on ten linkage groups and was 858.98 cM in length, with an average inter-locus distance of 0.81 cM. We identified six QTLs that are involved in downy mildew resistance. The four major QTLs, sBrDM8, yBrDM8, rBrDM8, and hBrDM8, for resistance at the seedling, young plant, rosette, and heading stages were mapped to A08, and are identical to BraDM. The two minor resistance QTLs, rBrDM6 (A06) and hBrDM4 (A04), were active at the rosette and heading stages. The major QTL sBrDM8 defined a physical interval of ~228 Kb on A08, and a serine/threonine kinase family gene, Bra016457, was identified as the possible candidate gene. We report here the first high-density bin map for Chinese cabbage, which will facilitate mapping QTLs for economically important traits and SNP marker development. Our results also expand knowledge of downy mildew resistance in Chinese cabbage and provide three SNP markers (A08-709, A08-028, and A08-018) that we showed to be effective when used in MAS to breed for downy mildew resistance in B. rapa.     

SNP-based pool genotyping and haplotype analysis accelerate fine-mapping of the wheat genomic region containing stripe rust resistance gene <Emphasis Type="Italic">Yr26</Emphasis>

Key message

NGS-assisted super pooling emerging as powerful tool to accelerate gene mapping and haplotype association analysis within target region uncovering specific linkage SNPs or alleles for marker-assisted gene pyramiding.

Abstract

Conventional gene mapping methods to identify genes associated with important agronomic traits require significant amounts of financial support and time. Here, a single nucleotide polymorphism (SNP)-based mapping approach, RNA-Seq and SNP array assisted super pooling analysis, was used for rapid mining of a candidate genomic region for stripe rust resistance gene Yr26 that has been widely used in wheat breeding programs in China. Large DNA and RNA super-pools were genotyped by Wheat SNP Array and sequenced by Illumina HiSeq, respectively. Hundreds of thousands of SNPs were identified and then filtered by multiple filtering criteria. Among selected SNPs, over 900 were found within an overlapping interval of less than 30 Mb as the Yr26 candidate genomic region in the centromeric region of chromosome arm 1BL. The 235 chromosome-specific SNPs were converted into KASP assays to validate the Yr26 interval in different genetic populations. Using a high-resolution mapping population (>?30,000 gametes), we confined Yr26 to a 0.003-cM interval. The Yr26 target region was anchored to the common wheat IWGSC RefSeq v1.0 and wild emmer WEWSeq v.1.0 sequences, from which 488 and 454 kb fragments were obtained. Several candidate genes were identified in the target genomic region, but there was no typical resistance gene in either genome region. Haplotype analysis identified specific SNPs linked to Yr26 and developed robust and breeder-friendly KASP markers. This integration strategy can be applied to accelerate generating many markers closely linked to target genes/QTL for a trait of interest in wheat and other polyploid species.

     

Mapping stripe rust resistance gene <Emphasis Type="Italic">YrZH22</Emphasis> in Chinese wheat cultivar Zhoumai 22 by bulked segregant RNA-Seq (BSR-Seq) and comparative genomics analyses

Key message

A stripe rust resistance gene YrZH22 was mapped by combined BSR-Seq and comparative genomics analyses to a 5.92 centimorgan (cM) genetic interval spanning a 4 Mb physical genomic region on wheat chromosome 4BL1.

Abstract

Stripe rust, caused by Puccinia striiformis f. sp. tritici (PST), is one of the most destructive diseases of wheat and severely threatens wheat production worldwide. The widely grown Chinese wheat cultivar Zhoumai 22 is highly resistant to the current prevailing PST race CYR34 (V26). Genetic analysis of F_5:6 and F_6:7 recombinant inbred line (RIL) populations indicated that adult-plant stripe rust resistance in Zhoumai 22 is controlled by a single gene, temporarily designated YrZH22. By applying bulked segregant RNA-Seq (BSR-Seq), 7 SNP markers were developed and SNP mapping showed that YrZH22 is located between markers WGGB105 and WGGB112 on chromosome arm 4BL. The corresponding genomic regions of the Chinese Spring 4BL genome assembly and physical map of Aegilops tauschii 4DL were selected for comparative genomics analyses to develop nine new polymorphic markers that were used to construct a high-resolution genetic linkage map of YrZH22. YrZH22 was delimited in a 5.92 cM genetic interval between markers WGGB133 and WGGB146, corresponding to 4.1 Mb genomic interval in Chinese Spring 4BL and a 2.2 Mb orthologous genomic region in Ae. tauschii 4DL. The genetic linkage map of YrZH22 will be valuable for fine mapping and positional cloning of YrZH22, and can be used for marker-assisted selection in wheat breeding.

     

Fine mapping of the rosy apple aphid resistance locus <Emphasis Type="Italic">Dp-fl</Emphasis> on linkage group 8 of the apple cultivar ‘Florina’

Rosy apple aphid (Dysaphis plantaginea), is one of the major insect pests of apple, causing serious physical and economic damage to fruit production. A dominant resistance gene Dp-fl was previously mapped at the bottom of linkage group LG8 from the cultivar ‘Florina’, linked to the SSR CH01h10. The development of additional genetic markers mapping closer to Dp-fl was needed to position the gene accurately and to improve the effectiveness of marker-assisted breeding (MAB). The aims of this study were to identify single nucleotide polymorphisms (SNPs) in the region of Dp-fl and to position these SNPs relative to Dp-fl. To generate a fine map of the Dp-fl interval, a total of 191 plants segregating for resistance and derived from four different populations were tested with temperature-switch PCR (TSP) markers developed for SNPs located in the region of CH01h10. All the plants were phenotypically evaluated for aphid resistance and those data compared with the genetic data. These efforts resulted in positioning the Dp-fl resistance locus in a genetic interval corresponding to a physical distance of about 330 kb on the ‘Golden Delicious’ genome. The new markers were tested on several apple founder cultivars in order to test the specificity of the SNPs and, thus, the best markers for the MAB were identified. Finally, the 330-kb interval was analyzed for the identification of coding sequences and putative candidate genes for D. plantaginea resistance were identified.     

QTL mapping of mandarin (<Emphasis Type="Italic">Citrus reticulata</Emphasis>) fruit characters using high-throughput SNP markers

Seedlessness, flavor, and color are top priorities for mandarin (Citrus reticulata Blanco) cultivar improvement. Given long juvenility, large tree size, and high breeding cost, marker-assisted selection (MAS) may be an expeditious and economical approach to these challenges. The objectives of this study were to construct high-density mandarin genetic maps and to identify single nucleotide polymorphism (SNP) markers associated with fruit quality traits. Two parental genetic maps were constructed from an F₁ population derived from ‘Fortune’ × ‘Murcott’, two mandarin cultivars with distinct fruit characters, using a 1536-SNP Illumina GoldenGate assay. The map for ‘Fortune’ (FOR) consisted of 189 SNPs spanning 681.07 cM and for ‘Murcott’ (MUR) consisted of 106 SNPs spanning 395.25 cM. Alignment of the SNP sequences to the Clementine (Citrus clementina) genome showed highly conserved synteny between the genetic maps and the genome. A total of 48 fruit quality quantitative trait loci (QTLs) were identified, and ten of them stable over two or more samplings were considered as major QTLs. A cluster of QTLs for flavedo color space values L, a, b, and a/b and juice color space values a and a/b were detected in a single genomic region on linkage group 4. Two carotenoid biosynthetic pathway genes, pds1 and ccd4, were found within this QTL interval. Several SNPs were potentially useful in MAS for these fruit characteristics. QTLs were validated in 13 citrus selections, which may be useful in further validation and tentative MAS in mandarin fruit quality improvement.     

The effects of polymorphisms in <Emphasis Type="Italic">growth hormone</Emphasis> and <Emphasis Type="Italic">growth hormone receptor</Emphasis> genes on production and reproduction traits in Aberdeen-Angus cattle (<Emphasis Type="Italic">Bos taurus</Emphasis> L., 1758)

The study was aimed to analyze the relation between individual genotypes and allelic variants of SNPs g.2141C>G of growth hormone gene, g.914T>A and g.257A>G of growth hormone receptor gene with growth and reproduction traits and to evaluate the populationgenetic structure in Aberdeen-Angus cattle (Bos taurus L., 1758) sample of Eastern Ukraine according SNPs studied. Allele C of SNP g.2141C>G has a positive correlation with birth weight, body stature, bigger rump, udder and total exterior evaluation score, shorter calving interval and better calve birth weight and negative correlation with calve average daily gain. Allele T of SNP g.914T>A has positive correlation with the muscle and udder size; live weight in each age, average daily gain, weight and average daily gain of calves born conform to the principle AA>TT≥TA. SNP g.257A>G showed a positive correlation for G allele with muscle size. The population is in equilibrium for SNPs g.2141C>G and g.257A>G, and in disequilibrium for SNP g.914T>A. The analysis showed no linkage disequilibrium between SNPs g.914T>A and g.257A>G. Inbreeding coefficient F_ST in Aberdeen-Angus group studied was 16.1%.     

Genetic mapping of <Emphasis Type="Italic">psl</Emphasis> locus and quantitative trait loci for angular leaf spot resistance in cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.)

One of the most important cucumber diseases is bacterial angular leaf spot (ALS), whose increased occurrence in open-field production has been observed over the last years. To map ALS resistance genes, a recombinant inbred line (RIL) mapping population was developed from a narrow cross of cucumber line Gy14 carrying psl resistance gene and susceptible B10 line. Parental lines and RILs were tested under growth chamber conditions as well as in the field for angular leaf spot symptoms. Based on simple sequence repeat and DArTseq, genotyping a genetic map was constructed, which contained 717 loci in seven linkage groups, spanning 599.7 cM with 0.84 cM on average between markers. Monogenic inheritance of the lack of chlorotic halo around the lesions, which is typical for ALS resistance and related with the presence of recessive psl resistance gene, was confirmed. The psl locus was mapped on cucumber chromosome 5. Two major quantitative trait loci (QTL) psl5.1 and psl5.2 related to disease severity were found and located next to each other on chromosome 5; moreover, psl5.1 was co-located with psl locus. Identified QTL were validated in the field experiment. Constructed genetic map and markers linked to ALS resistance loci are novel resources that can contribute to cucumber breeding programs.     

Identification of candidate genes of QTLs for seed weight in <Emphasis Type="Italic">Brassica napus</Emphasis> through comparative mapping among <Emphasis Type="Italic">Arabidopsis</Emphasis> and <Emphasis Type="Italic">Brassica</Emphasis>species

Background

Map-based cloning of quantitative trait loci (QTLs) in polyploidy crop species remains a challenge due to the complexity of their genome structures. QTLs for seed weight in B. napus have been identified, but information on candidate genes for identified QTLs of this important trait is still rare.

Results

In this study, a whole genome genetic linkage map for B. napus was constructed using simple sequence repeat (SSR) markers that covered a genetic distance of 2,126.4 cM with an average distance of 5.36 cM between markers. A procedure was developed to establish colinearity of SSR loci on B. napus with its two progenitor diploid species B. rapa and B. oleracea through extensive bioinformatics analysis. With the aid of B. rapa and B. oleracea genome sequences, the 421 homologous colinear loci deduced from the SSR loci of B. napus were shown to correspond to 398 homologous loci in Arabidopsis thaliana. Through comparative mapping of Arabidopsis and the three Brassica species, 227 homologous genes for seed size/weight were mapped on the B. napus genetic map, establishing the genetic bases for the important agronomic trait in this amphidiploid species. Furthermore, 12 candidate genes underlying 8 QTLs for seed weight were identified, and a gene-specific marker for BnAP2 was developed through molecular cloning using the seed weight/size gene distribution map in B. napus.

Conclusions

Our study showed that it is feasible to identify candidate genes of QTLs using a SSR-based B. napus genetic map through comparative mapping among Arabidopsis and B. napus and its two progenitor species B. rapa and B. oleracea. Identification of candidate genes for seed weight in amphidiploid B. napus will accelerate the process of isolating the mapped QTLs for this important trait, and this approach may be useful for QTL identification of other traits of agronomic significance.

     

Characterization of aphid resistance loci in black raspberry (<Emphasis Type="Italic">Rubus occidentalis</Emphasis> L.)

Viruses vectored by the aphid Amphorophora agathonica cause decline in black raspberry plant health resulting in a shortened life and poor fruit quality of the infected plantings. New aphid resistant cultivars could increase the longevity of plantings providing growers and processors with consistent fruit production. Recent exploration of the native range of black raspberry identified three sources of aphid resistance: Ag₄ from Ontario (ON), Canada, Ag₅ from Maine (ME), and a third source from Michigan (MI) with no formal designation. The objectives of this study were to assess segregation of these three sources of aphid resistance in populations with single and combined sources and develop markers that can identify each source of resistance. A genetic linkage map constructed for ORUS 4305 placed the ON aphid resistance locus on Rubus linkage group (RLG) 6. Segregation ratios in populations with single and combined sources, and linkage mapping in two populations (ORUS 4304 and ORUS 4812) segregating for the Ag₅ and MI sources, respectively, indicated that these three sources of resistance are each conferred by single dominant genes/alleles that are linked on RLG6. Confirmation of marker association in 16 validation populations identified four markers that could be used to predict resistance; however, none could distinguish between the ON and MI sources. These four markers may be useful for screening populations to enrich the field-planted progeny for aphid resistance. Fine mapping of the resistance loci is needed to develop functional markers at each of the resistance loci to enable pyramiding and durable aphid resistance.     

An ultra-dense integrated linkage map for hexaploid chrysanthemum enables multi-allelic QTL analysis

Key message

We constructed the first integrated genetic linkage map in a polysomic hexaploid. This enabled us to estimate inheritance of parental haplotypes in the offspring and detect multi-allelic QTL.

Abstract

Construction and use of linkage maps are challenging in hexaploids with polysomic inheritance. Full map integration requires calculations of recombination frequency between markers with complex segregation types. In addition, detection of QTL in hexaploids requires information on all six alleles at one locus for each individual. We describe a method that we used to construct a fully integrated linkage map for chrysanthemum (Chrysanthemum × morifolium, 2n = 6x = 54). A bi-parental F1 population of 406 individuals was genotyped with an 183,000 SNP genotyping array. The resulting linkage map consisted of 30,312 segregating SNP markers of all possible marker dosage types, representing nine chromosomal linkage groups and 107 out of 108 expected homologues. Synteny with lettuce (Lactuca sativa) showed local colinearity. Overall, it was high enough to number the chrysanthemum chromosomal linkage groups according to those in lettuce. We used the integrated and phased linkage map to reconstruct inheritance of parental haplotypes in the F1 population. Estimated probabilities for the parental haplotypes were used for multi-allelic QTL analyses on four traits with different underlying genetic architectures. This resulted in the identification of major QTL that were affected by multiple alleles having a differential effect on the phenotype. The presented linkage map sets a standard for future genetic mapping analyses in chrysanthemum and closely related species. Moreover, the described methods are a major step forward for linkage mapping and QTL analysis in hexaploids.