Buoyant density, growth rate, and the cell cycle in Streptococcus faecium.

The buoyant density in rapidly growing Streptococcus faecium 9790 cells varies over the cell cycle, in contrast to the density in Escherichia coli. Buoyant density in S. faecium was measured by using Percoll (Pharmacia Fine Chemicals, Piscataway, N.J.) density gradients. We found that the mean and coefficient of variation of the population density increased with growth rate; and within a population, the mean cell volume, which was measured electronically, increased with density. These results were compared with electron microscopic measurements of the size distributions of cell wall growth sites within each fraction of the density gradient. As the density increased within a population, the frequency of large cells increased and the frequency of newly initiated cell wall growth sites increased. These effects were more marked as the growth rate increased. Next, these data were regrouped by cell size by using the size of the central growth site as an index of cell cycle stage. Each frequency value was weighted by the proportion of the population represented by that density fraction. Then, the average buoyant density was calculated for each value of cell size. In all cell populations, the density decreased and then increased as the central site enlarged. Peripheral growth sites were initiated as density reached a maximum. At faster growth rates, density increased more steeply, and new peripheral growth sites opened up at a higher frequency. We suggest that the rate at which density increases during the cell cycle correlates with the initiation of new cell wall growth sites.     

Exine ontogeny in Borago officinalis pollen

The primexine matrix is finely granulo-fibrillar up to callose digestion; it becomes distinctly fibrillar at the free microspore stage. The columellae and the tectum are initiated at the middle tetrad stage, the foot layer and the endexine are initiated when the callose wall digestion begins. The columellae are initiated by the deposition of spiral elements around a clear central zone. This hollow aspect of columella disappears when thickening. The foot layer and the endexine are built by the expansion of plasmalemma derived components. The foot layer appears first at the poles, then at the interapertural levels and at last at the apertures while the endexine appears first at the mesoapertures, then it spreads laterally towards the interapertural levels and, at last, at the poles. The gemmae are formed at the free microspore stage over all the tectum. The thickening of the exine takes place essentially during the free microspore stage and continues during the vacuolate microspore one. Apertures are entirely formed before the complete digestion of the callose wall. The ectoapertures are determined by the lacking of the columellae; the sites of the pericolpal cavities and the mesoapertures result from the plasmalemma retraction even before the setting up of the foot layer and the endexine by which they will be delimited respectively afterwards. The endoapertures are determined by the lacking of compact endexine at their level, and merge into a continuous equatorial belt.     

Relationship of shape to initiation of new sites of envelope growth in Streptococcus faecium cells treated with beta-lactam antibiotics.

Exponential-phase cells of Streptococcus faecium were treated with concentrations of ampicillin and cephalothin which, over 60 min, had little effect on increase in culture mass but resulted in about a 65% inhibition of increase in cell numbers. The resulting drug-treated cells underwent about a doubling in cell mass and volume above that of the untreated cells. The newly divided cells produced in the presence of drugs were shown to be due to the division of central or primary sites of envelope growth present at the time of treatment. Sites that were newly initiated (secondary sites) at the time of treatment or sites initiated after treatment did not divide but enlarged in length and girth to give abnormally large cells. Although the increase in average total volume was the same after each interval of treatment with ampicillin and cephalothin, the primary growth sites of the cephalothin-treated cells grew somewhat more slowly, and their secondary sites grew somewhat more quickly, than did those of the ampicillin-treated cells. Cephalothin-treated cells initiated secondary sites at a rate similar to that of the untreated cells, whereas the ampicillin-treated cells exhibited reduced rates of secondary site initiation. Two models are presented that account for these results.     

The changing distribution of actin and nuclear behavior during the cell cycle of the mite-pathogenic fungus Neozygites sp

We have analyzed the behavior of nuclei and actin during the cell cycle of Neozygites sp. with mithramycin and rhodamine-labeled phalloidin. This fungus is an entomophagous zygomycete which grows as a rod-shaped fission yeast containing 2 to 12, mostly 3 to 4, nuclei per cell. The cell cycle is regulated such that there is not a constant nucleus-to-cytoplasmic volume ratio, and mitosis is initiated slightly asynchronously from one end of the cell. During interphase, detected actin occurs exclusively as peripheral plaques, which are most abundant at growing cell tips, and as perinuclear shells. Because the shells disperse and reform concomitantly with the formation and breakdown of a new septum-associated actin array, we infer that they are a novel form of actin storage. Intranuclear mitosis occurs in the absence of detectable spindle actin which suggests that actin is not a universal feature of mitotic systems and may be a cytoplasmic contaminant in open spindles of plant cells. Actin is involved in septum synthesis in previously unreported ways. Prior to morphologically detectable septum initiation, a peripheral equatorial band of longitudinal actin filaments assembles and then shortens to a transverse belt at the future site of septum synthesis. We suggest that this actin array recruits and organizes cell wall synthetic complexes for subsequent septum growth. During detectable septum synthesis, the invaginating plasmalemma bears plaques at a similar concentration to those at growing cellular tips.     

Electron tomographic analysis of somatic cell plate formation in meristematic cells of Arabidopsis preserved by high-pressure freezing

We have investigated the process of somatic-type cytokinesis in Arabidopsis (Arabidopsis thaliana) meristem cells with a three-dimensional resolution of approximately 7 nm by electron tomography of high-pressure frozen/freeze-substituted samples. Our data demonstrate that this process can be divided into four phases: phragmoplast initials, solid phragmoplast, transitional phragmoplast, and ring-shaped phragmoplast. Phragmoplast initials arise from clusters of polar microtubules (MTs) during late anaphase. At their equatorial planes, cell plate assembly sites are formed, consisting of a filamentous ribosome-excluding cell plate assembly matrix (CPAM) and Golgi-derived vesicles. The CPAM, which is found only around growing cell plate regions, is suggested to be responsible for regulating cell plate growth. Virtually all phragmoplast MTs terminate inside the CPAM. This association directs vesicles to the CPAM and thereby to the growing cell plate. Cell plate formation within the CPAM appears to be initiated by the tethering of vesicles by exocyst-like complexes. After vesicle fusion, hourglass-shaped vesicle intermediates are stretched to dumbbells by a mechanism that appears to involve the expansion of dynamin-like springs. This stretching process reduces vesicle volume by approximately 50%. At the same time, the lateral expansion of the phragmoplast initials and their CPAMs gives rise to the solid phragmoplast. Later arriving vesicles begin to fuse to the bulbous ends of the dumbbells, giving rise to the tubulo-vesicular membrane network (TVN). During the transitional phragmoplast stage, the CPAM and MTs disassemble and then reform in a peripheral ring phragmoplast configuration. This creates the centrifugally expanding peripheral cell plate growth zone, which leads to cell plate fusion with the cell wall. Simultaneously, the central TVN begins to mature into a tubular network, and ultimately into a planar fenestrated sheet (PFS), through the removal of membrane via clathrin-coated vesicles and by callose synthesis. Small secondary CPAMs with attached MTs arise de novo over remaining large fenestrae to focus local growth to these regions. When all of the fenestrae are closed, the new cell wall is complete. Few endoplasmic reticulum (ER) membranes are seen associated with the phragmoplast initials and with the TVN cell plate that is formed within the solid phragmoplast. ER progressively accumulates thereafter, reaching a maximum during the late PFS stage, when most cell plate growth is completed.     

Study of Pole Assembly in Bacillus subtilis by Computer Reconstruction of Septal Growth Zones Seen in Central, Longitudinal Thin Sections of Cells

The septal growth of Bacillus subtilis 168/s has been studied by making a number of observations from thin sections of cells from exponentially growing cultures. The process was initiated by the formation of a new cross wall under a preexisting layer of cylindrical wall. An annular notch appeared to cut through the overlying wall and presumably allowed the cross wall to split into two layers of peripheral wall. During this initial notching process, two raised bands of wall material were produced which resembled those previously observed in morphological studies of Streptococcus faecalis. Through an improved fixation technique, it was possible to preserve the bands seen in B. subtilis to the extent that they were used as markers to study the subsequent stages of septal growth. These stages included (i) the continued displacement of the two bands from the cross wall (as the two nascent polar surfaces enlarged and as the diameter of the cross wall decreased), (ii) the closure of the cross wall, and (iii) the final severance of the common cross wall connection between two completed poles. To study this process in a more quantitative manner, three-dimensional reconstructions of the envelope observed between pairs of the raised bands were made from axial thin sections of cells. The process of reconstruction was based on a technique by which x, y coordinates were taken from thin sections and were rotated around the cell's central axis. These reconstructions were used to estimate the surface area or volume of the reconstructed zones or their parts. A round of septal growth was then simulated by arranging 118 reconstructions in order of increasing surface area or volume. The topology of the process was studied by noting how various measurements of septal thickness, length, surface area, and volume varied as a function of increasing septal zone size. This analysis was based on several assumptions, of which three of the most important are: (i) the bands produced by the initial notching process are markers which separate septal from cylindrical wall growth; (ii) a septal zone observed between pairs of bands is made up of two nascent poles and a single cross wall; and (iii) as septal zones develop in terms of relative age they increase in size (volume or surface area) or amount of wall. The data suggested that the S. faecalis model of surface growth (in which polar growth occurs through a regulated constrictive separation and expansion of a cross wall) also seems applicable to the pattern of septal growth observed here for B. subtilis. This was indicated from measurements which showed that increases in the size of nascent polar surfaces were correlated with decreases in cross wall diameter. An explanation of these observations may be that decreases in cross wall diameter were due to a progressive splitting of the cross wall that removed surface from the outer circumference of the cross wall and converted it into new polar surface. Calculations further suggested that if the poles of B. subtilis were made by this model a sizeable and variable increase in surface area of the cross wall would also be required to convert these separating cross wall layers into two curved polar structures. Measurements of wall thickness taken from various locations within septal zones indicated that while the thickness of the polar wall of B. subtilis was constant over its surface, the width of the cross wall varied considerably during a round of synthesis. Again, one of the simplest explanations compatible with these observations and those previously made in S. faecalis is that the B. subtilis cross wall is brought to a constant thickness (possibly by remodeling or precursor addition) before or during separation. Although most observations made from the reconstruction of the septal zones of B. subtilis may fit the S. faecalis model of surface growth, differences in the pattern of septal growth were seen when the two organisms were compared. These have been discussed in terms of differences in the regulation of their respective septal growth sites and basic mechanisms of wall assembly and modification.     

Mechanism of polarization of Listeria monocytogenes surface protein ActA

The polar distribution of the ActA protein on the surface of the Gram-positive intracellular bacterial pathogen, Listeria monocytogenes, is required for bacterial actin-based motility and successful infection. ActA spans both the bacterial membrane and the peptidoglycan cell wall. We have directly examined the de novo ActA polarization process in vitro by using an ActA-RFP (red fluorescent protein) fusion. After induction of expression, ActA initially appeared at distinct sites along the sides of bacteria and was then redistributed over the entire cylindrical cell body through helical cell wall growth. The accumulation of ActA at the bacterial poles displayed slower kinetics, occurring over several bacterial generations. ActA accumulated more efficiently at younger, less inert poles, and proper polarization required an optimal balance between protein secretion and bacterial growth rates. Within infected host cells, younger generations of L. monocytogenes initiated motility more quickly than older ones, consistent with our in vitro observations of de novo ActA polarization. We propose a model in which the polarization of ActA, and possibly other Gram-positive cell wall-associated proteins, may be a direct consequence of the differential cell wall growth rates along the bacterium and dependent on the relative rates of protein secretion, protein degradation and bacterial growth.     

Two new heterothallicNeosartorya from African soil

Neosartorya nishimurae andN. otanii, two new heterothallic species isolated from African forest soil, are described and illustrated.Neosartorya nishimurae is characterized by its rapid growth on Czapek and malt extract agras, white cleistothecia, lenticular ascospores with two broad equatorial crests and echinulate convex surfaces, and large ellipsoidal conidia with a lobate-reticulate wall.Neosartorya otanii is characterized by its rapid growth on Czapek and malt extract agars, lenticular ascospores with two widely separated equatorial crests and tuberculate or lobate-reticulate convex surfaces, and globose to broadly ellipsoidal conidia with a micro-tuberculate wall.     

Electron microscope study of the rod-to-coccus shape change in a temperature-sensitive rod- mutant of Bacillus subtilis.

The changes in cell morphology of Bacillus subtilis rodB during a temperature shift from 20 to 42 degrees C, in the absence of added anions, are described. At 20 degrees C the organisms grow as rods but gradually become spherical in shape when placed at 42 degrees C. The shape change is initiated by an increase in diameter at the cell equator, resulting in a bulged morphology, which is further modified to the morphology of a coccus. This change may involve a modification of the pattern of normal cylindrical extension such that incorporation of newly synthesized wall leads only to increase in diameter, perhaps from a growth zone of limited extent. The pattern of surface growth was followed by reconstructing the sequence of cross wall formation and pole construction in rods grown at 20 degrees C and in organisms incubated at 42 degrees C for 75 and 150 min. In thin section, wall forming the septum and nascent poles can be distinguished from the surface distal to the division site by the presence of raised tears, perhaps analogous to the wall bands of streptococci. By using an analog rotation technique involving the three-dimensional reconstruction of cells by mathematical rotation of axial thin sections about their longitudinal axis, it is shown that the proportion of septal wall increases during the shape change. In the coccal forms, all surface growth may arise from septal growth sites.     

Pollen development in orchids 1. Cytoskeleton and the control of division plane in irregular patterns of cytokinesis

Summary The cytokinetic apparatus in microsporogenesis lacks a preprophase band of microtubules and the selection of cytokinetic planes is dependent upon disposition of nuclei which define cytoplasmic domains via post-meiotic radial systems of microtubules. Meiotic cytokinesis was investigated in hybrid moth orchids (Phalaenopsis) exhibiting irregular patterns of cytokinesis. In these polliniate orchids, spindle orientation is imprecise, and the tetrad nuclei (therefore the microspores) may be in rhomboidal, tetrahedral or linear arrangement. The hybrid Sabine Queen (section Phalaenopsis) regularly undergoes simultaneous cytokinesis, as is common in orchids. The hybrid Vista Rainbow (section Amboinenses) produces either a complete dyad wall, a partial wall, or no wall after first nuclear division. In all cases, a first division phragmoplast is initiated in the interzonal region and expands centrifugally into the peripheral cytoplasm. Fluorescence microscopy shows that the phragmoplast consists of fusiform bundles of microtubules and Factin bisected by a non-fluorescent zone. If a cell plate fails to form, a band of organelles polarized in the equatorial region effectively divides the cell into two domains. The organelles disperse when a dyad wall is complete, but tend to remain polarized around an incomplete wall. In four-nucleate coenocytes, the usual interzonal microtubules between sister nuclei (primary) form slightly in advance of secondary arrays between non-sister nuclei. Phragmoplasts are initiated in sites defined by the post-meiotic microtubule arrays.Abbreviations CLSM confocal laser scanning microscope/microscopy - DMSO dimethylsulfoxide - FITC fluorescein isothiocyanate - PPB preprophase band of microtubules - TEM transmission electron microscope/microscopy     

Analysis of initiation of sites of cell wall growth in Streptococcus faecium during a nutritional shift

Three-dimensional reconstruction methods were applied to electron micrographs of Streptococcus faecium to study the initiation of cell wall growth sites during a nutritional shift experiment. Upon lowering the mass doubling time from 76 to 33 min by the addition of excess glutamate, the formation of new cell wall growth sites accelerated above the old steady-state rate at about the same time (10 to 15 min) as did mass, RNA, protein, cell numbers, and autolytic capacity but considerably before DNA (30 min) and peptidoglycan (20 min) synthesis did. During the shift, the average range of cell volumes over which new wall growth sites were introduced did not change significantly. However, upon the shift there was an increase in the frequency of cells having new sites, which was due to the faster-growing cells initiating more new sites in peripheral locations before division. After a transition period, the number of new sites per milliliter of culture increased at a rate that paralleled that of the culture mass. These findings support a model in which new sites are introduced when cells grow to a relatively constant, growth rate-independent size, while the rate at which sites form and grow increases with the growth rate. In this model, chromosome synthesis does not regulate the formation of new sites of cell wall growth, but existing sites cannot be completed until rounds of chromosome synthesis are completed.     

Autolytic Enzyme System of Streptococcus faecalis IV. Electron Microscopic Observations of Autolysin and Lysozyme Action

Cell walls (LOG walls) were isolated from cultures of Streptococcus faecalis ATCC 9790 in the exponential phase of growth. These walls were either allowed to undergo autolytic dissolution (in the presence or absence of trypsin) or wall autolysis was inactivated with sodium dodecylsulfate (SDS walls). Inactivated walls were treated either with lysozyme or with isolated, partially purified S. faecalis autolysin. During wall lysis, samples were removed, negatively stained with phosphotungstate, and examined in the electron microscope. Both lysozyme and isolated autolysin appeared to act over the entire surface of SDS walls. After partial dissolution, a fibrous network over the surface was revealed. Lysozyme digestion revealed the presence of prominent, highly-contrasted equatorial and subequatorial bands around the walls. After trichloroacetic acid extraction, the bands were seen less frequently and less distinctly in the partially lysozyme digested walls, suggesting that the bands contained nonpeptidoglycan polymers. In the absence of trypsin (which activates a latent form of the autolysin), autolysis of LOG walls appeared to start at the equatorial bands and to proceed back towards the apex of the coccus. Ribbons of wall material coming off the wide edge of the nearly hemispherical wall fragments were observed. Activation of latent autolysis resulted in lytic action over the entire wall surface. The results are consistent with the previously postulated location of active autolysin at the areas of new wall synthesis and the random location of latent autolysin in LOG walls.     

Roles of the CDC24 gene product in cellular morphogenesis during the Saccharomyces cerevisiae cell cycle

Temperature-sensitive yeast mutants defective in gene CDC24 continued to grow (i.e., increase in cell mass and cell volume) at restrictive temperature (36 degrees C) but were unable to form buds. Staining with the fluorescent dye Calcofluor showed that the mutants were also unable to form normal bud scars (the discrete chitin rings formed in the cell wall at budding sites) at 36 degrees C; instead, large amounts of chitin were deposited randomly over the surfaces of the growing unbudded cells. Labeling of cell-wall mannan with fluorescein isothiocyanate-conjugated concanavalin A suggested that mannan incorporation was also delocalized in mutant cells grown at 36 degrees C. Although the mutants have well-defined execution points just before bud emergence, inactivation of the CDC24 gene product in budded cells led both to selective growth of mother cells rather than of buds and to delocalized chitin deposition, indicating that the CDC24 gene product functions in the normal localization of growth in budded as well as in unbudded cells. Growth of the mutant strains at temperatures less than 36 degrees C revealed allele-specific differences in behavior. Two strains produced buds of abnormal shape during growth at 33 degrees C. Moreover, these same strains displayed abnormal localization of budding sites when growth at 24 degrees C (the normal permissive temperature for the mutants); in each case, the abnormal pattern of budding sites segregated with the temperature sensitivity in crosses. Thus, the CDC24 gene product seems to be involved in selection of the budding site, formation of the chitin ring at that site, the subsequent localization of new cell wall growth to the budding site and the growing bud, and the balance between tip growth and uniform growth of the bud that leads to the normal cell shape.     

Cell cycle changes in the buoyant density of exponential-phase cells of Streptococcus faecium.

Cell buoyant densities were determined by centrifugation in Percoll gradients containing exponential-phase cells of Streptococcus faecium ATCC 9790 grown at a mass doubling time of about 33 min. This bacterium showed the highest average density values (1.13 g/ml) measured to date for any eucaryotic or procaryotic organism. Fractions having the highest densities were enriched with cells that were in the process of dividing or had just divided. These high-density fractions were also enriched with cells that had newly initiated sites of cell wall growth. It appears that S. faecium shows minimum cell densities in the midportion of its cycle.     

Acidic cell elongation drives cell differentiation in the Arabidopsis root

In multicellular systems, the control of cell size is fundamental in regulating the development and growth of the different organs and of the whole organism. In most systems, major changes in cell size can be observed during differentiation processes where cells change their volume to adapt their shape to their final function. How relevant changes in cell volume are in driving the differentiation program is a long‐standing fundamental question in developmental biology. In the Arabidopsis root meristem, characteristic changes in the size of the distal meristematic cells identify cells that initiated the differentiation program. Here, we show that changes in cell size are essential for the initial steps of cell differentiation and that these changes depend on the concomitant activation by the plant hormone cytokinin of the EXPAs proteins and the AHA1 and AHA2 proton pumps. These findings identify a growth module that builds on a synergy between cytokinin‐dependent pH modification and wall remodeling to drive differentiation through the mechanical control of cell walls.     

Growth and division of Streptococcus pneumoniae: localization of the high molecular weight penicillin-binding proteins during the cell cycle

The bacterial peptidoglycan, the main component of the cell wall, is synthesized by the penicillin-binding proteins (PBPs). We used immunofluorescence microscopy to determine the cellular localization of all the high molecular weight PBPs of the human pathogen Streptococcus pneumoniae, for a wild type and for several PBP-deficient strains. Progression through the cell cycle was investigated by the simultaneous labelling of DNA and the FtsZ protein. Our main findings are: (i) the temporal dissociation of cell wall synthesis, inferred by the localization of PBP2x and PBP1a, from the constriction of the FtsZ-ring; (ii) the localization of PBP2b and PBP2a at duplicated equatorial sites indicating the existence of peripheral peptidoglycan synthesis, which implies a similarity between the mechanism of cell division in bacilli and streptococci; (iii) the abnormal localization of some class A PBPs in PBP-defective mutants which may explain the apparent redundancy of these proteins in S. pneumoniae.     

Flower development inAntirrhinum majus L. (Scrophulariaceae) with a comment upon corolla tube formation

The inflorescence apex is stratified and has a single layered tunica, bracts as well as all the floral organs develop acropetally. Except for stamens which are initiated with the activity of deeper layers of apex, all other floral appendages are initiated with the activity of second layer. On the basis of ontogenetic studies the floral organs have been homologised with the leaves. The adjacent calyx lobes develop and remain closely appressed and do not show post-genital fusion. Corolla tube is formed due to zonal growth preceeded by joint growth of hump on the abaxial face of stamen primordia and interprimordial region between petal primordia. Thus no post-genital fusion was observed. The placentae develop concomitantly with carpellary wall.     

Mechanoreceptor afferent activity compared with receptor field dimensions and pressure changes in feline urinary bladder.

The relationship between vesical mechanoreceptor field dimensions and afferent nerve activity recorded in pelvic plexus nerve filaments was examined in chloralose-anesthetized cats. Orthogonal receptor field dimensions were monitored with piezoelectric ultrasonic crystals. Reflexly generated bladder contractile activity made measurements difficult, therefore data were collected from cats subjected to actual sacral rhizotomy. Afferent activity was episodic and was initiated at different pressure and receptor field dimension thresholds. Maximum afferent activity did not correlate with maximum volume or pressure. Furthermore, activity was not linearly related to intravesical pressure, receptor field dimensions, or calculated wall tension. Pressure-length hysteresis of the receptor fields occurred. The responses of identified afferent units and their associated receptor field dimensions to brief contractions elicited by the ganglion stimulant 1,1-dimethyl-4-phenylpiperazinium iodide (2.5-20 micrograms i.a.), studied under constant volume or constant pressure conditions, are compatible with bladder mechanoreceptors behaving as tension receptors. Because activity generated by bladder mechanoreceptors did not correlate in a simple fashion with intravesical pressure or receptor field dimensions, it is concluded that such receptors are influenced by the viscoelastic properties of the bladder wall. Furthermore, as a result of the heterogeneity of the bladder wall, receptor field tension appears to offer a more precise relationship with the activity of bladder wall mechanoreceptors than does intravesical pressure.     

Ultrastructure of infection-thread development during the infection of soybean by Rhizobium japonicum

The location and topography of infection sites in soybean (Glycine max (L.) Merr.) root hairs spot-inoculated with Rhizobium japonicum have been studied at the ultrastructural level. Infections commonly developed at sites created when the induced deformation of an emerging root hair caused a portion of the root-hair cell wall to press against an adjacent epidermal cell, entrapping rhizobia within the pocket between the two host cells. Infections were initiated by bacteria which became embedded in the mucigel in the enclosed groove. Infection-thread formation in soybean appears to involve degradation of mucigel material and localized disruption of the outer layer of the folded hair cell wall by one or more entrapped rhizobia. Rhizobia at the site of penetration are separated from the host cytoplasm by the host plasmalemma and by a layer of wall material that appears similar or identical to the normal inner layer of the hair cell wall. Proliferation of the bacteria results in an irregular, wall-bound sac near the site of penetration. Tubular infection threads, bounded by wall material of the same appearance as that surrounding the sac, emerge from the sac to carry rhizobia roughly single-file into the hair cell. Growing regions of the infection sac or thread are surrounded by host cytoplasm with high concentrations of organelles associated with synthesis and deposition of membrane and cell-wall material. The threads follow a highly irregular path toward the base of the hair cell. Threads commonly run along the base of the hair cell for some distance, and may branch and penetrate into subjacent cortical cells at several points in a manner analagous to the initial penetration of the root hair.     

Genetic analysis of cell morphogenesis in fission yeast--a role for casein kinase II in the establishment of polarized growth.

We have initiated a study to identify genes regulating cell morphogenesis in the fission yeast Schizosaccharomyces pombe. Five genes have been identified, orb1-orb5, whose mutation gives rise to spherical cells, indicative of an inability to polarize growth. Two further genes have been identified, tea1 and ban1, whose mutant alleles have disturbed patterns of tip growth, leading to T-shaped and curved cells. In fission yeast, sites of cell wall deposition are defined by actin localization, with actin distributions and therefore growth patterns undergoing cell cycle stage-specific reorganization. Studies of double mutants constructed between orb5-19 and various cdc mutants blocked before and after cell division show that orb5 is required for the re-establishment of polar growth following cytokinesis. This indicates that the mutant allele orb5-19 is defective in the reinitiation of polarized growth, even though actin reorganization to the cell tips occurs normally. orb5 encodes a fission yeast homologue of casein kinase II alpha. We propose that this kinase plays a role in the translation of cell polarity into polarized growth, but not in the establishment of polarity itself.