Synthesis and evaluation of a selective molecularly imprinted polymer for the contraceptive drug levonorgestrel

A molecularly imprinted polymer (MIP) has been prepared using levonorgestrel (LEV) as template. The polymer was synthesised in a non-covalent approach using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linking monomer via a free radical polymerization. An equivalent blank polymer was also synthesised in the absence of the template compound. Batch adsorption experiments were used to evaluate the binding affinity of the imprinted polymer. After packing MIP into a stainless steel column (150 mm x 4.6 mm i.d.), retention and elution of the template and related compounds were evaluated by high-performance liquid chromatography (HPLC). This LEV imprinted polymer was further applied for selective solid phase extraction (SPE) of LEV from human serum. It was confirmed that the binding ability of the prepared MIP for LEV was essentially sufficient in the presence of other compounds coexisting in serum sample. Therefore, as a selective and efficient solid phase material, LEV imprinted polymer has a high potential application in analysis of this steroidal hormone in clinical purposes.     

Monitoring of cAMP-imprinted polymer by fluorescence spectroscopy

Conventional functional monomers together with fluorescent monomer, trans-4-[p-(N,N-dimethylamino)styryl]-N-vinylbenzylpyridinium chloride (vb-DMASP), were copolymerised in the presence of a target molecule, nucleotide-cAMP that acted as a molecular template. The polymer was copolymerised in thin-layer films. After removal of the template the functionalised cavities that exist in the fluorescent material are able to specifically bind the template. Subsequent adsorption of the template-cAMP causes quenching of fluorescence of the polymer. The specific photochemical processes accompanying the template adsorption are discussed further. The imprinted polymers monitored by both steady-state and time-resolved fluorescence techniques show specificity and selectivity of binding of the template on the imprinted functionalised cavities.     

Face-to-face porphyrin moieties assembled with spacing for pyrazine recognition in molecularly imprinted polymers

A strategy for arranging two porphyrin moieties in a face-to-face fashion in polymeric material was demonstrated by molecular imprinting, whereby porphyrin Zn(II) complex monomers were cross-linked with ethylene glycol dimethacrylate in the presence of pyrazine or 1,5-naphthyridine as a template molecule. In chromatographic studies using the resultant imprinted polymers as stationary phase, both the polymers showed selectivity for the original template molecule, suggesting that two zinc porphyrin moieties were immobilized in the face-to-face fashion, and were center-aligned for pyrazine recognition and offset-arranged for 1,5-naphthyridine recognition. The imprinted polymer with porphyrin moieties also showed a decrease in its fluorescence intensity in response to the concentration of the target molecule, suggesting the potential utility as sensing material.     

An innovative approach to molecularly imprinted capillaries for polar templates by grafting polymerization

Molecularly imprinted polymers have been successfully used as selective stationary phases in capillary electrophoresis. Notwithstanding, this technique suffers from several drawbacks as the loss of molecular recognition properties in aqueous media and the lack of feasibility for imprinted systems directed towards highly polar templates soluble in aqueous environments only. Thus, the preparation of imprinted polymers for highly polar, water-soluble analytes, represents a challenge. In this work, we present an innovative approach to overcome these drawbacks. It is based on a surface molecular imprinting technique that uses preformed macromonomers as both functional recognition elements and cross-linking agents. A poly-2-hydroxyethyl-co-methacrylic acid linear polymer was grafted from the surface of silica capillaries. The grafted polymer was exhaustively esterified with methacrylic anhydride to obtain polyethylendimethacrylate-co-methacrylic acid linear chains. Then, as a proof of concept, an adequate amount of a very polar template like penicillin V was added in a hydro-organic mixture, and a thin layer of imprinted polymer was obtained by cross-linking the polymer linear chains. The binding behaviour of the imprinted and non-imprinted capillaries was evaluated in different separation conditions in order to assess the presence of template selectivity and molecular recognition effects. The experimental results clearly show that this innovative kind of imprinted material can be easily obtained in very polar polymerization environments and that it is characterized by enhanced molecular recognition properties in aqueous buffers and good selectivity towards the template and strictly related molecules.     

Composite of CdTe quantum dots and molecularly imprinted polymer as a sensing material for cytochrome c

A newly designed molecularly imprinted polymer (MIP) material was fabricated and successfully utilized as recognition element to develop a quantum dots (QDs) based MIP-coated composite for selective recognition of the template cytochrome c (Cyt). The composites were synthesized by sol-gel reaction (imprinting process). The imprinting process resulted in an increased affinity of the composites toward the corresponding template. The fluorescence of MIP-coated QDs was stronger quenched by the template versus that of non-imprinted polymer (NIP)-coated QDs, which indicated the composites could recognize the corresponding template. The results of specific experiments further exhibited the recognition ability of the composites. Under optimum conditions, the linear range for Cyt is from 0.97 μM to 24 μM, and the detection limit is 0.41 μM. The new composites integrated the high selectivity of molecular imprinting technology and fluorescence property of QDs and could convert the specific interactions between imprinted cavities and corresponding template to the obvious changes of fluorescence signal. Therefore, a simple and selective sensing system for protein recognition has been realized.     

The selectivity of protein‐imprinted gels and its relation to protein properties: A computer simulation study

Polymer‐based protein recognition systems have enormous potential within clinical and diagnostic fields due to their reusability, biocompatibility, ease of manufacturing, and potential specificity. Imprinted polymer matrices have been extensively studied and applied as a simple technique for creating artificial polymer‐based recognition gels for a target molecule. Although this technique has been proven effective when targeting small molecules (such as drugs), imprinting of proteins have so far resulted in materials with limited selectivity due to the large molecular size of the protein and aqueous environment. Using coarse‐grained molecular simulation, we investigate the relation between protein makeup, polymer properties, and the selectivity of imprinted gels. Nonspecific binding that results in poor selectivity is shown to be strongly dependent on surface chemistry of the template and competitor proteins as well as on polymer chemistry. Residence time distributions of proteins diffusing within the gels provide a transparent picture of the relation between polymer constitution, protein properties, and the nonspecific interactions with the imprinted gel. The pronounced effect of protein surface chemistry on imprinted gel specificity is demonstrated.     

Synthesis of imprinted beads by aqueous suspension polymerisation for chiral recognition of antihistamines

A novel non-stabilised aqueous suspension polymerisation methodology for the preparation of spherical molecularly imprinted polymers is described with chlorpheniramine (CP), d-chlorpheniramine (d-CP), brompheniramine (BP) and d-brompheniramine (d-BP) as the templates, respectively. Using this rapid and simple technique, controlled polymer beads in the low micron range with narrow size distributions were generated by photo-polymerisation. The use of agitation speed as a method of controlling bead size distribution was demonstrated. Enantioselective properties of the imprinted beads were examined and the polymers prepared using d-chlorpheniramine and d-brompheniramine were capable of discriminating between the enantiomers of the template. Cross-selectivity studies were performed by batch rebinding with the influence of template size and functional group orientation of analytes on the recognition properties of the imprinted polymers investigated. Physical characteristics of all polymers were studied by nitrogen sorption porosimetry, particle size analysis and scanning electron microscopy (SEM) in order to gain an insight into the role of such properties on retention behaviour.     

Fab fragments imprinted SPR biosensor for real-time human immunoglobulin G detection

F(ab) fragments imprinted surface plasmon resonance (SPR) chip was prepared for the real-time detection of human immunoglobulin G (IgG). In order to attach polymerization precursor on SPR chip, the SPR chip surface was modified with allyl mercaptan. F(ab) fragments of the IgG molecules were prepared by papain digestion procedure and collected by fast protein liquid chromatography (FPLC) system using Hi-Trap_r Protein A FF column. The collected F(ab) fragments were complexed with histidine containing specific monomer, N-methacryloyl-l-histidine methyl ester (MAH). Molecular imprinted polymeric nanofilm was prepared on SPR chip in the presence of ethylene glycol dimethacrylate and 2-hydroxyethylmethacrylate. The template molecules, F(ab) fragments, were removed from the polymeric nanofilm using 1M NaCl solution (pH: 7.4, phosphate buffer system). The molecular imprinted SPR chip was characterized by contact angle, atomic force microscopy and Fourier transform infrared spectroscopy. By the real-time IgG detection studies carried out using aqueous IgG solutions in different concentrations, the kinetics and isotherm parameters of the molecular imprinted SPR chip-IgG system were calculated. To show selectivity and specificity of the molecular imprinted SPR chip, competitive kinetic analyses were performed using bovine serum albumin (BSA), IgG, F(ab) and F(c) fragments in singular and competitive manner. As last step, IgG detection studies from human plasma were performed and the measured IgG concentrations were well matched with the results determined by enzyme-linked immunosorbent assay (ELISA). The results obtained with the molecular imprinted SPR chip were well fitted to Langmuir isotherm and the detection limit was found as 56 ng/mL. In the light of the results, we can conclude that the proposed molecular imprinted SPR chip can detect IgG molecules from both aqueous solutions and complex natural samples.     

Synthetic cinchonidine receptors obtained by cross-linking linear poly(methacrylic acid) derivatives as an alternative molecular imprinting technique

A molecular imprinting approach to construct synthetic receptors was examined, wherein a linear pre-polymer bearing functional groups for intermolecular interaction with a given molecule is cross-linked in the presence of the molecule as a template, and subsequent removal of the template from the resultant network-polymer is expected to leave a complementary binding site. Poly(methacrylic acid) (PMAA) derivatized with a vinylbenzyl group as a cross-linkable side chain was utilized as the pre-polymer for the molecular imprinting of a model template, (-)-cinchonidine. Selectivity of the imprinted polymer was evaluated by comparing the retentions of the original template, (-)-cinchonidine and its antipode (+)-cinchonine in chromatographic tests, exhibiting a selectivity factor up to 2.4. By assessment of the imprinted polymers in a batch mode, a dissociation constant at 20 degrees C for (-)-cinchonidine was estimated to be K (d) = 2.35 x 10(-6) M (the number of binding sites: 4.54 x 10(-6) mol/g-dry polymer). The displayed affinity and selectivity appeared comparable to those of an imprinted polymer prepared by a conventional monomer-based protocol, thus showing that the pre-polymer, which can be densely cross-linked, is an alternative imprinter for developing template-selective materials. (-)-Cinchonidine-imprinted polymers were prepared and assessed using the pre-polymers bearing different densities of the vinylbenzyl group and different amounts of the cross-linking agent to examine the appropriate density of the cross-linking side chain that was crucial for developing the high affinity and selectivity of the imprinted polymers.     

Molecularly imprinted copolymer membranes functionalized by phase inversion imprinting for uracil recognition and permselective binding

Uracil (URA) was selected as a template for preparing molecularly imprinted membranes of poly(acrylonitrile-co-methylacrylic acid) [P(AN-co-MAA)] using the phase inversion technique. This study used Fourier transform infra-red (FT-IR) and (1)H nuclear magnetic resonance (NMR) spectroscopic studies to characterize the polymer-template interaction and scanning electron microscopy (SEM) and atomic force microscopy (AFM) for morphology of the URA imprinted membrane. Resultant membranes had typical ultrafiltration structure with porous morphology and showed a permeation flux of 3.5 x 10 9-5)m(3)/(m(2)s) for 32 microM URA aqueous solution. Permselective binding to the target molecule was observed in permeation experiments with 7.9 micromol/g binding capacity of URA. Binding selectivity was discussed for URA and its analogs, dimethyluracil (DMURA) and caffeine (CAF), with 0.6 and 0.8 micromol/g binding capacity, respectively.     

Effect of the solvent on recognition properties of molecularly imprinted polymer specific for ochratoxin A

A molecularly imprinted polymer specific for the mycotoxin ochratoxin A has been synthesised using a non-covalent approach. The polymer has shown an excellent affinity and specificity for the target template in aqueous solutions. The binding experiments, NMR study and molecular modelling have proven that the template recognition by polymer originates from the shape complementarity of binding sites. The binding mechanism is critically depended on factors that affect the polymer conformation. Thus the variation in buffer concentration, pH and presence of organic solvent, which affect the polymer swelling or shrinking, had a profound effect on the polymer recognition properties.     

A molecular imprinted polymer with recognition properties towards the carcinogenic mycotoxin ochratoxin A

A molecularly imprinted polymer which recognises the mycotoxin ochratoxin A was prepared using the mimic N-(4-chloro-1-hydroxy-2-naphthoylamido)-(L) -phenylalanine as a template. The polymer was obtained by dissolving the template, methacrylic acid and ethylendimethacrylate in chloroform and polymerising the mixture by thermal treatment at 60°C. The monolith obtained was crushed, sieved to 30–90 m and extensively washed till the template could no longer be found in the washing solution. The binding properties towards the template, ochratoxin A and several related molecules were measured by eluting with acetonitrile and chloroform a HPLC column packed with the imprinted polymer. The experimental results show that the polymer recognises not only the template well, but also the ochratoxin A. The specific molecular recognition effect is due to hydrogen bond interactions but in order to assure the full recognition effect adjunctive steric factors are necessary. The magnitude of these interactions can be controlled by the use of limited amounts of acetic acid in the mobile phase.From the measurement of the relative selectivity it was found that only the simultaneous presence of the carboxyl, the phenolic hydroxyl and certain peculiar substructures such as the chlorine atom assures the whole recognition of the template.     

Influence of polymerization temperature on the molecular recognition of imprinted polymers

This paper aimed at investigating the influence of polymerization temperature on the molecular recognition of molecularly imprinted polymers (MIPs) based on multiple non-covalent interactions. 3-l-Phenylalanylaminopyridine (3-l-PheNHPy) imprinted polymers were prepared using azobisnitriles as either thermal initiators or photoinitiators at various temperatures of 10, 40 and 60 degrees C, respectively. These polymers were subsequently evaluated in the high-performance liquid chromatographic (HPLC) mode for enantioselectivity. An unexpected result shows that polymer prepared at 40 degrees C has the highest enantioselectivity, but not the polymer prepared at lower temperature of 10 degrees C. Further, the effect of elution temperature and sample load on the selectivity of polymers was investigated in detail. In order to get a better understanding of the "exception", the influence of polymerization temperature on the polymerization extent and polymer morphology was studied by FT-IR spectrum test, cross-polarization magic angle spinning (CP-MAS) (13)NMR spectra experiment and pore analysis. Based on these results we attribute this "exception" to that there is a tradeoff between the extent of polymerization and stabilization of the template-functional monomer complexes. And an optimal polymerization temperature can be found for each combination of template and monomer.     

Nanostructured conducting molecularly imprinted polymer for selective uptake/release of naproxen by the electrochemically controlled sorbent

A conducting molecularly imprinted polymer (CMIP) film, based on polypyrrole, was electrosynthesized for selective uptake/release and determination of naproxen. The film was prepared by incorporation of a template anion (naproxen) during the electropolymerization of pyrrole into a platinum electrode using the cyclic voltammetry method. Overoxidized polypyrrole films with cavities complementary to the template were used as a potential-induced selective recognition element in the solid-phase sorbent. Various important fabricating factors, which control the performance of the CMIP film, were investigated using fluorescence spectroscopy. The measured fluorescence intensities of released solutions were related to the concentrations of naproxen taken up into the films. Several key parameters such as applied potential and time for uptake and release were varied to achieve the optimal sorption procedure. The film template with naproxen exhibited excellent selectivity over some interference. The calibration graphs were linear in the ranges of 5×10(-8) to 3×10(-7)molml(-1) and 7×10(-6) to 8×10(-4)molml(-1), and the limit of detection was 1×10(-8)molml(-1). The CMIP films, as the electrochemically controlled solid-phase sorbent, were applied for the selective cleanup and quantification of trace amounts of naproxen from physiological samples. Scanning electron microscopy confirmed the nanostructure morphology of the films.     

Protein-responsive imprinted polymers with specific shrinking and rebinding

Stimuli-responsive protein imprinted polymers were obtained via a combination of molecular imprinting and reversible stimuli-responsive polymer using lysozyme or cytochrome c as template, N-isopropylacrylamide (NIPA) as major monomer, methacrylic acid (MAA) and acrylamide (AAm) as functional co-monomers, and N,N-methylenebisacrylamide (MBAAm) as crosslinker. The molecularly imprinted polymers (MIPs) can respond not only to external stimuli such as temperature and salt concentration, but also to the corresponding template protein with significant specific volume shrinking. This specific shrinking behavior was attributed to the synergistic effect of multiple-site weak interactions (electrostatic force, hydrogen bonding and hydrophobic interaction) and the cavity effect. The MIPs showed highly selective adsorption of template proteins with specific shrinking compared with the non-imprinted polymers. The results indicated that the MIPs seemed to change shape to accommodate the conformation of the template protein leading to the formation of a shape complementary cavity.     

Cell and nucleus refractive‐index mapping by interferometric phase microscopy and rapid confocal fluorescence microscopy

We present a multimodal technique for measuring the integral refractive index and the thickness of biological cells and their organelles by integrating interferometric phase microscopy (IPM) and rapid confocal fluorescence microscopy. First, the actual thickness maps of the cellular compartments are reconstructed using the confocal fluorescent sections, and then the optical path difference (OPD) map of the same cell is reconstructed using IPM. Based on the co‐registered data, the integral refractive index maps of the cell and its organelles are calculated. This technique enables rapidly measuring refractive index of live, dynamic cells, where IPM provides quantitative imaging capabilities and confocal fluorescence microscopy provides molecular specificity of the cell organelles. We acquire human colorectal adenocarcinoma cells and show that the integral refractive index values are similar for the whole cell, the cytoplasm and the nucleus on the population level, but significantly different on the single cell level.     

Probing the limits of molecular imprinting: strategies with a template of limited size and functionality

A series of polymers molecularly imprinted with the general anaesthetic propofol were synthesized using both semi- and non-covalent approaches. The polymers were evaluated with respect to template rebinding in both aqueous and organic media. In aqueous media, the observed propofol binding in these polymer systems was largely hydrophobic and non-specific in nature. In non-polar solvents such as hexane, electrostatic (hydrogen bonding) interactions dominate resulting in some selectivity. The implication of these results, in conjunction with those obtained using structures of similar size in other studies, is that propofol, a template possessing limited functionality and size, appears to define the lower limit for template size and degree of functionalization that can be used for the creation of ligand-selective recognition sites in molecularly imprinted polymers. Furthermore, studies with alternative ligands indicate that the steric crowding of a ligand's functionality to the polymer contributes to the extent of polymer-ligand recognition.     

Imaging of single fluorescent molecules using video-rate confocal microscopy

Single fluorescent molecules in aqueous solution were imaged for the first time at video-rate using Nipkow disk-type confocal microscopy. Performance of this method was evaluated by imaging single kinesin molecules labeled with fluorescent dyes of tetramethylrhodamine (TMR) or IC5. Photodecomposition lifetimes of the fluorophores were approximately 10 s for TMR and approximately 2 s for IC5 under the incident laser power of 0.5 W/mm(2). Both the fluorescence intensity and the photobleaching rate were proportional to the laser power from 0.65 to 3 W/mm(2). 2D sliding movement of single kinesin molecules along microtubules on glass surface and 3D Brownian motion of individual kinesin molecules in viscous solution could be observed using this microscopy. These results indicated that this method could be applicable to the study of single molecular events in living cells at real time.     

3D-SIM结构照明超分辨率显微镜实现蛋白质在植物亚细胞器内的定位

基因表达产物蛋白质的亚细胞定位是解析基因生物学功能的重要证据之一。近年来出现的超分辨率光学成像技术已成功应用于人类和动物细胞中,预示着显微成像技术继激光共聚焦技术后的又一重要进步。由于植物细胞的特殊性和成像技术的研发取向,超分辨率光学成像技术在植物细胞蛋白质亚细胞定位的应用尚未见报道。该研究利用Delta Vision OMX显微镜技术,克服了叶绿体基粒中叶绿素自发荧光与融合蛋白荧光不易区分的缺陷,解决了受分辨率局限无法将植物细胞中蛋白质在亚细胞器内可视化精确定位的技术难题,成功地将植物蔗糖合成酶Zm SUS-SH1定位在烟草表皮细胞叶绿体基粒周围。该研究同时建立了一套基于撕片制片法的简便OMX显微镜制片方法,并针对OMX显微成像技术在植物细胞中蛋白质亚细胞定位的应用进行了讨论。