Particle Erosion Resistance of Bionic Samples Inspired from Skin Structure of Desert Lizard, Laudakin stoliczkana

In order to improve the particle erosion resistance of engineering surfaces,this paper proposed a bionic sample which is inspired from the skin structure of desert lizard,Laudakin stoliczkana.The bionic sample consists of a hard shell (aluminum) and a soft core (silicone rubber) which form a two-layer composite structure.The sand blast tests indicated that the bionic sample has better particle erosion resistance.In steady erosion period,the weight loss per unit time of the bionic sample is about 10％ smaller than the contrast sample.The anti-erosion mechanism of the bionic sample was studied by single particle impact test.The results show that,after the impact,the kinetic energy of the particle is reduced by 56.5％ on the bionic sample which is higher than that on the contrast sample (31.2％).That means the bionic sample can partly convert the kinetic energy of the particle into the deformation energy of the silicone rubber layer,thus the erosion is reduced.     

Design and Mechanics Simulation of Bionic Lubrication System of Artificial Joints

We propose a new structure for artificial joints with a joint capsule which is designed to overcome the drawback of current prostheses that omit many functions of the lubricant and the joint capsule. The new structure is composed of three components： lubricant, artificial joint and artificial joint capsule. The lubricant sealed in the capsule can not only reduce the wear of the artificial joint but also prevents the wear particles leaking into the body. So unexpected reactions between the wear particles and body can be avoided completely. A three-dimensional （3-D） finite element analysis （FEA） model was created for a bionic knee joint with capsule. The stresses and their distribution in the artificial capsule were simulated with different thickness, loadings, and flexion angles. The results show that the maximum stress occurs in the area between the artificial joint and the capsule. The effects of capsule thickness and the angles of flexion on stress are discussed in detail.     

Study of a Bionic Paddy Impeller Inspired by Buffalo Hoof

Based on the particular geometric characteristics of buffalo hoof, which is capable to walk on the soft soil of paddy-field with low resistance, a bionic blade for paddy field impeller was designed. The test results in soil bin show that the traction ability of the bionic blade for paddy wheel is improved. Compared with the conventional plate blade, the maximum pull force of the bionic blade is increased by 37.8% and the maximum impeller efficiency is 38.3% higher. Computational simulation analysis shows that bionic shape can improve the driving force of the impeller by resisting and reducing the impacts resulted from the sharp velocity change of the discontinuous surface water flow, and the driving torque of the bionic blade may increase as well.     

Mechanical Properties and Microstructure of Bionic Non-Smooth Stainless Steel Surface by Laser Multiple Processing

Laser multiple processing, i.e. laser surface texturing and then Laser Shock Processing (LSP), is a new surface processingtechnology for the preparation of bionic non-smooth surfaces. Based on engineering bionics, samples of bionic non-smoothsurfaces of stainless steel 0Crl 8Ni9 were manufactured in the form of reseau structure by laser multiple processing. The mechanicalproperties (including microhardness, residual stress, surface roughness) and microstructure of the samples treated bylaser multiple processing were compared with those of the samples without LSP The results show that the mechanical propertiesof these samples by laser multiple processing were clearly improved in comparison with those of the samples without LSP Themechanisms underlying the improved surface microhardness and surface residual stress were analyzed, and the relations betweenhardness, comnressive residual stress and roughness were also presented.     

Bionic Research on Fish Scales for Drag Reduction

To reduce friction drag with bionic method in a more feasible way,the surface microstructure of fish scales was analyzed attempting to reveal the biologic features responding to skin friction drag reduction.Then comparable bionic surface mimicking fish scales was fabricated through coating technology for drag reduction.The paint mixture was coated on a substrate through a self-developed spray-painting apparatus.The bionic surface with micron-scale caves formed spontaneously due to the interfacial convection and deformation driven by interfacial tension gradient in the presence of solvent evaporation.Comparative experiments between bionic surface and smooth surface were performed in a water tunnel to evaluate the effect of bionic surface on drag reduction,and visible drag reduction efficiency was obtained.Numerical simulation results show that gas phase develops in solid-liquid interface of bionic surface with the effect of surface topography and partially replaces the solid-liquid shear force with gas-liquid shear force,hence reducing the skin friction drag effectively.Therefore,with remarkable drag reduction performance and simple fabrication technology,the proposed drag reduction technique shows the promise for practical applications.     

The Lightweight Design of Low RCS Pylon Based on Structural Bionics

<正> A concept of Specific Structure Efficiency (SSE) was proposed that can be used in the lightweight effect evaluation ofstructures.The main procedures of bionic structure design were introduced systematically.The parameter relationship betweenhollow stem of plant and the minimum weight was deduced in detail.In order to improve SSE of pylons, the structural characteristicsof hollow stem were investigated and extracted.Bionic pylon was designed based on analogous biological structuralcharacteristics.Using finite element method based simulation, the displacements and stresses in the bionic pylon were comparedwith those of the conventional pylon.Results show that the SSE of bionic pylon is improved obviously.Static, dynamic andelectromagnetism tests were carried out on conventional and bionic pylons.The weight, stress, displacement and Radar CrossSection (RCS) of both pylons were measured.Experimental results illustrate that the SSE of bionic pylon is markedly improvedthat specific strength efficiency and specific stiffness efficiency of bionic pylon are increased by 52.9% and 43.6% respectively.The RCS of bionic pylon is reduced significantly.     

Single-particle tracking: models of directed transport.

Single-particle tracking techniques make it possible to measure motion of individual particles on the cell surface. In these experiments, individual trajectories are observed, so the data analysis must take into account the randomness of individual random walks. Methods of data analysis are discussed for models combining diffusion and directed motion. In the uniform flow model, a tracer simultaneously diffuses and undergoes directed motion. In the conveyor belt model, a tracer binds and unbinds to a uniform conveyor belt moving with constant velocity. If a tracer is bound, it moves at the velocity of the conveyor belt; if it is unbound, it diffuses freely. Trajectories are analyzed using parameters that measure the extent and asymmetry of the trajectory. A method of assessing the usefulness of such parameters is presented, and pitfalls in data analysis are discussed. Joint probability distributions of pairs of extent and asymmetry parameters are obtained for a pure random walk. These distributions can be used to show that a trajectory is not likely to have resulted from a pure random walk.     

Elastic BucMing of Bionic Cylindrical Shells Based on Bamboo

High load-bearing efficiency is one of the advantages of biological structures after the evolution of billions of years. Biomimicking from nature may offer the potential for lightweight design. In the viewpoint ofrnechanics properties, the culm of bamboo comprises of two types of cells and the number of the vascular bundles takes a gradient of distribution. A three-point bending test was carried out to measure the elastic modulus. Results show that the elastic modulus of bamboo decreases gradually from the periphery towards the centre. Based on the structural characteristics of bamboo, a bionic cylindrical structure was designed to mimic the gradient distribution of vascular bundles and parenchyma cells. The buckling resistance of the bionic structure was compared with that of a traditional shell of equal mass under axial pressure by finite element simulations. Results show that the load-bearing capacity of bionic shell is increased by 124.8%. The buckling mode of bionic structure is global buckling while that of the conventional shell is local buckling.     

Elastic Buckling of Bionic Cylindrical Shells Based on Bamboo

High load-bearing efficiency is one of the advantages of biological structures after the evolution of billions of years.Biomimicking from nature may offer the potential for lightweight design. In the viewpoint of mechanics properties, the culm of bamboo comprises of two types of cells and the number of the vascular bundles takes a gradient of distribution. A three-point bending test was carried out to measure the elastic modulus. Results show that the elastic modulus of bamboo decreases gradually from the periphery towards the centre. Based on the structural characteristics of bamboo, a bionic cylindrical structure was designed to mimic the gradient distribution of vascular bundles and parenchyma cells. The buckling resistance of the bionic structure was compared with that of a traditional shell of equal mass under axial pressure by finite element simulations. Results show that the load-bearing capacity of bionic shell is increased by 124.8%. The buckling mode of bionic structure is global buckling while that of the conventional shell is local buckling.     

Bionic Design and Finite Element Analysis of Elbow in Ice Transportation Cooling System

With the increase in mining depth, mine heat harm has appeared to be more prominent. The mine heat harm could be resolvedor reduced by ice refrigeration. Thus, ice transportation through pipeline becomes a critical problem; typically flowresistance occurs in the elbow. In the present study, according to the analysis of the surface morphology of fish scale, abiomimetic functional surface structure for the interior wall of elbow is designed. Based on the theory of liquid-solid two phaseflow, a CFD numerical simulation of ice-water mixture flowing through the elbow is carried out using finite element method.Conventional experiments of pressure drop and flow resistance for both bionic and common elbows are conducted to test theeffect of the bionic elbow on flow resistance reduction. It is found that with the increase in the ice mass fraction in the ice-watermixture, the effect of bionic elbow on resistance reduction becomes more obvious.     

Inactivation of Listeria monocytogenes/Flavobacterium spp. biofilms using chlorine: impact of substrate,pH, time and concentration

AIMS: To determine the effect of chlorine on mixed bacterial biofilms on stainless steel (SS) and conveyor belt surfaces. METHODS AND RESULTS: Biofilms were exposed to pH-adjusted (6.5) and non-pH-adjusted solutions of chlorine (200, 400 and 600 ppm) for either 2, 10 or 20 min and survivors enumerated. There were significant differences in cell death relating to chlorine concentration and exposure time for the cells attached to the SS, with solutions adjusted to pH 6.5 being more effective at reducing numbers. In contrast, on conveyor belt surfaces cell numbers decreased by less than two logs after 20 min regardless of treatment. CONCLUSIONS: Chlorine effectiveness is dependent on its concentration, solution pH, exposure time, the nature of the surface and the microbial species present. SIGNIFICANCE AND IMPACT OF THE STUDY the interests of food safety it is important that sanitizer users are aware of the conditions that effect their performance.     

A Bionic Approach for Topology Optimization for Tension-only or Compression-only Design

##正## A new bionic approach is presented to find the optimal topologies of a structure with tension-only or compression-onlymaterial based on bone remodelling theory.By traditional methods,the computational cost of topology optimization of thestructure is high due to material nonlinearity.To improve the efficiency of optimization,the reference-interval with material-replacement method is presented.In the method,firstly,the optimization process of a structure is considered as bone remodellingprocess under the same loading conditions.A reference interval of Strain Energy Density (SED),corresponding to thedead zone or lazy zone in bone mechanics,is adopted to control the update of the design variables.Secondly,a material-replacement scheme is used to simplify the Finite Element Analysis (FEA) of structure in optimization.In the operation ofmaterial-replacement,the original tension-only or compression-only material in design domain is replaced with a new isotropicmaterial and the Effective Strain Energy Density (ESED) of each element can be obtained.Finally,the update of design variablesis determined by comparing the local ESED and the current reference interval of SED,e.g.,the increment of a relativedensity is nonzero if the local ESED is out of the current reference interval.Numerical results validate the method.     

Quantitative evaluation of threshold fiber strain that induces reorganization of cytoskeletal actin fiber structure in osteoblastic cells

The cytoskeletal stress fiber structure plays essential roles in various kinds of cellular functions such as shape maintenance, active motility and mechanosensing, and its structure is dynamically reorganized under each functional process. In known reorganization mechanisms of the stress fibers, a change in its mechanical condition has been suggested as one of the key mediators that affect the reorganization process. Some experimental studies have clarified that tension release in the stress fibers induces fiber depolymerization that is considered to be the initial phase of the reorganization process. However, quantitative mechanical values such as strain or stress that induce depolymerization have still not been evaluated. This study is aimed at the quantitative evaluation of the mechanical value that induces stress fiber depolymerization, to gain a basic understanding of the reorganization phenomenon from a mechanical viewpoint. Osteoblastic cells (MC3T3-E1) were cultured on prestretched silicone rubber substrate. Compressive deformation was applied to the cells by uniaxially releasing the prestretched substrate strain and change in the stress fiber structure was observed. The results indicated that the compressive strain magnitude, not in the whole cell body but in the stress fiber itself, is important to induce disassembly of the stress fiber structure. The existence of a threshold strain magnitude for initiating fiber disassembly was also suggested; the threshold strain magnitude was evaluated as approximately -0.20.     

Structural Bionic Design and Experimental Verification of a Machine Tool Column

Based on the configuration principles of biological skeletons and sandwich stems, a machine tool column with stiffening ribs inside was designed using structural bionic method. After the lightening effect was verified by finite element simulation, scale-down models of a conventional column and a bionic column were fabricated and tested. Results indicate that the bionic column can reduce the maximum static displacement by 45.9% with 6.13% mass reduction and its dynamic performances is also better with increases in the first two natural frequencies. The structural bionic design is effective in improving the static and dynamic structural performances of high speed machine tools.     

Load-dispersing design with twined-spring geometry of a distensible intracranial stent for cerebral aneurysms

Endovascular stents are increasingly being used to treat cerebral aneurysms. Mechanically, a cerebrovascular stent must have a low radial stiffness to prevent vessel dissection and rupture. To minimize these complications, we need to consider a stent design that has a low radial force and disperses the load within the stented artery. Therefore, highly distensible, load-dispersion stent designs are desirable for intracranial stenting. This study focused on closed-cell stent geometries and calculated the differences in stress within the artery because of the structure by using finite-element modeling. The results showed that the design with hexagonal cell geometry stretched in the circumferential direction had lower radial and circumferential stresses than did the other models. Comparing the maximum radial stress of our models, stress reduction of 35% was obtained with this design. Moreover, its radial stress was 47 kPa, which was similar to the critical stress of 42 kPa assumed in this study. This stent model was characterized by narrow strut spacing and a large surface area, which was dominated by the twined-spring geometry. It had low radial and circumferential stresses and a dispersed stress distribution compared with the other models. Therefore, this design is a desirable load-dispersing design for cerebrovascular treatment.     

Anaerobic desulfurization of ground rubber with the thermophilic archaeon Pyrococcus furiosus – a new method for rubber recycling

The anaerobic sulfur-reducing archaeon Pyrococcus furiosus was investigated regarding its capacity to desulfurize rubber material. The microorganism's sensitivity towards common rubber elastomers and additives was tested and several were shown to be toxic to P. furiosus. The microorganism was shown to utilize sulfur in vulcanized natural rubber and an increase in cell density was obtained when cultivated in the presence of spent tire rubber. Ethanol-leached cryo-ground tire rubber treated with P. furiosus for 10 days was vulcanized together with virgin rubber material (15% w/w) and the mechanical properties of the resulting material were determined. The increase in the stress at break value and the decrease in swell ratio and stress relaxation rate obtained for material containing microbially treated rubber (compared to untreated material) show the positive effects of microbial desulfurization on rubber.     

Erosion-Resistant Surfaces Inspired by Tamarisk

Tamarisk, a plant that thrives in arid and semi-arid regions, has adapted to blustery conditions by evolving extremely ef- fective and robust anti-erosion surface patterns. However, the details of these unique properties and their structural basis are still unexplored. In this paper, we demonstrate that the tamarisk surface only suffers minor scratches under wind-sand mixture erosion. The results show that the anti-erosion property of bionic sample, inspired by tamarisk surface with different surface morphologies, can be attributed to the flow rotating in the grooves that reduces the particle impact speed. Furthermore, the simulation and experiment on the erosion wear behavior of the bionic samples and bionic centrifugal fan blades show that the bionic surface with V-type groove exhibits the best erosion resistance. The bionic surface on centrifugal fan blades with opti- mum parameters can effectively improve anti-erosion property by 28.97%. This paper show more opportunities for bionic application in improving the anti-erosion performance of moving parts that work under dirt and sand particle environment, such as helicopter rotor blades, airplane propellers, rocket motor nozzles, and pipes that regularly wear out from erosion.     

PspA can form large scaffolds in Escherichia coli

The phage shock protein A (PspA) of Escherichia coli stabilizes the cytoplasmic membrane under stress conditions. Here we demonstrate that PspA can form hollow spherical or prolate spheroidal particles of about 30-40nm diameter with a scaffold-like arrangement of protein subunits at the surface. The 'PspA-scaffold' is the basic structure that is common to all particles. The PspA-scaffold may be of fundamental importance, as it could allow PspA to stabilize the integrity of membranes through numerous contact points over a large surface area.     

Superhydrophobicity of Bionic Alumina Surfaces Fabricated by Hard Anodizing

Bionic alumina samples were fabricated on convex dome type aluminum alloy substrate using hard anodizing technique.The convex domes on the bionic sample were fabricated by compression molding under a compressive stress of 92.5 MPa.The water contact angles of the as-anodized bionic samples were measured using a contact angle meter (JC2000A) with the 3 μL water drop at room temperature.The measurement of the wetting property showed that the water contact angle of the unmodified as-anodized bionic alumina samples increases from 90° to 137° with the anodizing time.The increase in water contract angle with anodizing time arises from the gradual formation of hierarchical structure or composite structure.The structure is composed of the micro-scaled alumina columns and pores.The height of columns and the depth of pores depend on the anodizing time.The water contact angle increases significantly from 96° to 152° when the samples were modified with self-assembled monolayer of octadecanethiol (ODT),showing a change in the wettability from hydrophobicity to super-hydrophobicity.This improvement in the wetting property is attributed to the decrease in the surface energy caused by the chemical modification.     

Active stress during compression testing of various foods measured using a multiple-point sheet sensor

Using a multiple-point sheet sensor (MSS), load and contact area were directly measured for compression of four different foods. The MSS provided temporal and spatial changes in stress applied on the sample surface during the testing. The sum of load value detected by the MSS corresponded to the load measured by a universal testing machine during the compression. The contact area between a flat probe and food surface varied with the variety of foods even though under a small strain, and increased as compression strain increased. The active stress, that is, the load divided by the contact area, was different from conventional stress, that is, the load divided by the initial cross-sectional area. The value of active stress provided a better explanation of textural characteristics of food, because texture is often sensed under a large deformation and mixed assessment of mechanical and geometrical properties.