Studies on the irreversible step of pepsinogen activation

The bond cleavage step of pepsinogen activation has been investigated in a kinetic study in which the denatured products of short-term acidifications were separated on SDS-polyacrylamide gels and the peptide products were quantitated by densitometry. Although several peptide products were observed, under the conditions of the experiments (pH values between 2.0 and 2.8, 22 degrees C), the only one that was a product of an initial bond cleavage was the 44-residue peptide, which upon removal from pepsinogen yields pepsin. The rate constant for this bond cleavage is 0.015 s-1 at pH 2.4, which is the same as that at which the alkali-stable potential activity of pepsinogen had been found to convert to the alkali-labile activity of pepsin. When the conversion of zymogen to enzyme was followed by the change in fluorescence of adsorbed 6-(p-toluidinyl)naphthalene-2-sulfonate (TNS), the rate of change in TNS fluorescence was the same as the conversion to alkali lability. However, pepstatin blocked the bond cleavage of pepsinogen to pepsin, but it permitted the fluorescence change to proceed. In fact, it accelerated the apparent rate of change of TNS fluorescence by shifting the pKa of an essential conjugate acid from 1.7 to 2.6. The conversion to alkali lability, therefore, may be considered to be a composite of a relatively slow conformational change (at the measured rate), followed immediately by a relatively fast bond cleavage.     

Conformational change that accompanies pepsinogen activation observed in real time by fluorescence energy transfer

Pig pepsinogen has been reacted with N-carboxymethylisatoic anhydride to form N-carboxymethyl-anthraniloyl-(CMA-) pepsinogen, derivatized at Lysp18, Lysp23, Lysp27, Lysp30, and Lys320. Conformational change associated with activation was detected by following energy transfer from tryptophan residues of the pepsin moiety, excited at 295 nm, to CMA groups, monitored by emission above 415 nm. Efficiency of this energy transfer is a measure of conformational change. For this zymogen derivative the change in efficiency occurs with a first order rate constant of 0.041 s-1 at pH 2.4, 22 degrees, which equals the rate at which, following acidification, alkali-stable potential activity becomes alkali-labile. For the native zymogen the rate of this conversion had been shown to be identical to the rate of cleavage of the scissile bond of pepsinogen. Therefore, the correspondence in this derivative of the rates of conversion to alkali lability and change in energy transfer demonstrates that a conformational change accompanies the peptide bond cleavage of activation.     

Mechanism of intramolecular activation of pepsinogen. Evidence for an intermediate delta and the involvement of the active site of pepsin in the intramolecular activation of pepsinogen.

Intramolecular pepsinogen activation is inhibited either by pepstatin, a potent pepsin inhibitor, or by purified globin from hemoglobin, a good pepsin substrate. Also, pepsinogen at pH 2 can be bound to a pepstatin-Sepharose column and recovered as native zymogen upon elution in pH 8 buffer. Kinetic studies of the globin inhibition of pepsinogen activation show that globin binds to a pepsinogen intermediate. This interaction gives rise to competitive inhibition of intramolecular pepsinogen activation. The evidence presented in this paper suggests that pepsinogen is converted rapidly upon acidification to the pepsinogen intermediate delta. In the absence of an inhibitor, the intermediate undergoes conformational change to bind the activation peptide portion of this same pepsinogen molecule in the active center to form an intramolecular enzyme-substrate complex (intermediate theta). This is followed by the intramolecular hydrolysis of the peptide bond between residues 44 and 45 of the pepsinogen molecule and the dissociation of the activation peptide from the pepsin. Intermediate delta apparently does not activate another pepsinogen molecule via an intermolecular process. Neither does intermediate delta hydrolyze globin substrate.     

Rearranging the domains of pepsinogen.

Most eukaryotic aspartic protease zymogens are synthesized as a single polypeptide chain that contains two distinct homologous lobes and a pro peptide, which is removed upon activation. In pepsinogen, the pro peptide precedes the N-terminal lobe (designated pep) and the C-terminal lobe (designated sin). Based on the three-dimensional structure of pepsinogen, we have designed a pepsinogen polypeptide with the internal rearrangement of domains from pro-pep-sin (native pepsinogen) to sin-pro-pep. The domain-rearranged zymogen also contains a 10-residue linker designed to connect sin and pro domains. Recombinant sin-pro-pep was synthesized in Escherichia coli, refolded from 8 M urea, and purified. Upon acidification, sin-pro-pep autoactivates to a two-chain enzyme. However, the emergence of activity is much slower than the conversion of the single-chain zymogen to a two-chain intermediate. In the activation of native pepsinogen and sin-pro-pep, the pro region is cleaved at two sites between residues 16P and 17P and 44P and 1 successively, and complete activation of sin-pro-pep requires an additional cleavage at a third site between residues 1P and 2P. In pepsinogen activation, the cleavage of the first site is rate limiting because the second site is cleaved more rapidly to generate activity. In the activation of sin-pro-pep, however, the second site is cleaved slower than the first, and cleavage of the third site is the rate limiting step.(ABSTRACT TRUNCATED AT 250 WORDS)     

The first step in the activation of chicken pepsinogen is similar to that of prochymosin.

Chicken pepsinogen was incubated at pH2.5 with pepstatin. The zymogen activated itself by a sequential mechanism and an intact peptide derived from residues 1-26 in the protein was released in the first step. This peptide was found to inhibit the milk-clotting activities of pig and chicken pepsins and calf chymosin but to different extents.     

Activation mechanism of monkey and porcine pepsinogens A. One-step and stepwise activation pathways and their relation to intramolecular and intermolecular reactions

The activation of Sepharose-bound monkey pepsinogen A under acidic conditions proceeded by cleavage of the Leu47-Ile48 bond, indicating the occurrence of the intramolecular one-step activation, although the rate of cleavage was very slow. On the other hand the activation of monkey pepsinogen A in solution was highly dependent on pepsinogen concentration and the addition of exogenous pepsin A accelerated the rate of activation, indicating the predominance of intermolecular reaction. The cleavage site, however, was also restricted to the Leu47-Ile48 bond. Thus, apparently exclusive one-step activation occurred in monkey pepsinogen. The activation of porcine pepsinogen A in solution was also dependent on pepsinogen concentration and the addition of exogenous pepsin A accelerated the rate of activation. The major cleavage site by the exogenously added pepsin was the Leu44-Ile45 bond. Therefore the site most susceptible to the intermolecular attacks was the bond connecting the activation segment and the pepsin moiety in both monkey and porcine pepsinogens. In porcine pepsinogen, however, a part of the zymogen was activated through the intermediate form, and an intramolecular reaction was suggested to be involved in the generation of this form. These results showed that in both pepsinogens A the intramolecular reaction occurred, first yielding pepsin A or the intermediate form, which then acted intermolecularly on the remaining pepsinogen or the intermediate form to complete the activation in a short time. A molecular mechanism for the activation reaction was proposed to explain consistently the experimental results.     

The high-resolution crystal structure of porcine pepsinogen.

The structure of porcine pepsinogen at pH 6.1 has been refined to an R-factor of 0.173 for data extending to 1.65 A. The final model contains 180 solvent molecules and lacks density for residues 157-161. The structure of this aspartic proteinase zymogen possesses many of the characteristics of pepsin, the mature enzyme. The secondary structure of the zymogen consists predominantly of beta-sheet, with an approximate 2-fold axis of symmetry. The activation peptide packs into the active site cleft, and the N-terminus (1P-9P) occupies the position of the mature N-terminus (1-9). Thus changes upon activation include excision of the activation peptide and proper relocation of the mature N-terminus. The activation peptide or residues of the displaced mature N-terminus make specific interactions with the substrate binding subsites. The active site of pepsinogen is intact; thus the lack of activity of pepsinogen is not due to a deformation of the active site. Nine ion pairs in pepsinogen may be important in the advent of activation and involve the activation peptide or regions of the mature N-terminus which are relocated in the mature enzyme. The activation peptide-pepsin junction, 44P-1, is characterized by high thermal parameters and weak density, indicating a flexible structure which would be accessible to cleavage. Pepsinogen is an appropriate model for the structures of other zymogens in the aspartic proteinase family.     

Conversion of pepsinogen to pepsin. Further evidence for intramolecular and pepsin-catalyzed activation.

Exposure of pepsinogen to acid for less than 2 min yields a product with proteolytic activity. This activity is due to intramolecular and intermolecular formation of pepsin from pepsinogen. We find no evidence for intermolecular proteolytic activity in the zymogen. These conclusions are based upon two sets of experiments. First, chemical cleavage of pepsinogen during short activation is demonstrated by quantitative analysis of the NH2-terminal 2 residues of the pepsin and pepsinogen in an activation mixture. In addition, quantitative NH2-terminal analyses after activation under different conditions confirm our previous inference that the product of unimolecular pepsinogen activation is homogeneous whereas bimolecular activation produces a pepsin product with a variety of NH2 termini. Second, spectral changes which occur upon acidification of a pepsinogen solution and are reversed by neutralization are shown to be consistent with the chemical cleavage of pepsinogen during acidification. The first order rate constant for pepsinogen activation, calculated from these spectral experiments, agrees well with the value we had determined previously.     

Molecular characteristics of pepsinogen and pepsin from duck glandular stomach

1. Two procedures were developed for the preparation of duck pepsinogen, an enzyme from the family of aspartic proteases (EC 3.4.23.1) and its zymogen. 2. The amino acid composition, sugar content and the partial N- and C-terminal sequences of both the enzyme and the zymogen were determined. These sequences are highly homologous with the terminal sequences of chicken pepsin(ogen). 3. Duck pepsinogen and pepsin are unlike other pepsin(ogen)s in being relatively stable in alkaline media: pepsinogen is inactivated at pH 12.1, pepsin at pH 9.6. 4. Duck pepsin is inhibited by diazoacetyl-D,L-norleucine methyl ester (DAN), 1,2-epoxy-3(p-nitrophe-noxy)propane (EPNP), pepstatin and a synthetic pepsin inhibitor Val-D-Leu-Pro-Phe-Phe-Val-D- Leu. The pH-optimum of duck pepsin determined in the presence of synthetic substrate is pH 4. 5. Duck pepsin has a marked milk-clotting activity whereas its proteolytic activity is lower than that of chicken pepsin. 6. The activation of duck pepsinogen is paralleled by two conformational changes. The activation half-life determined in the presence of a synthetic substrate at pH 2 and 14 degrees C is 20 sec.     

Conversion of pepsinogen into pepsin is not a one-step process.

By incubation of pepsinogen with pepstatin at pH2.5, the first 'active' protein generated on activation is trapped in an inactive complex. The first activation peptide liberated has been identified as residues 1-16 from the pepsinogen sequence. This suggests a sequential mechanism rather than a one-step formation of pepsin.     

Isolation of an activation intermediate and determination of the amino acid sequence of the activation segment of human pepsinogen A

Upon activation of human pepsinogen A at pH 2.0 in the presence of pepstatin, an intermediate form was generated together with pepsin A. This activation intermediate could be separated from pepsinogen A and pepsin A by DE-32 cellulose chromatography at pH 5.5. It had a molecular weight intermediate between those of pepsinogen A and pepsin A, and contained about half the number of basic amino acid residues in pepsinogen A. It had phenylalanine as the amino(N)-terminal amino acid, and was deduced to be generated by release of N-terminal 25 residue segment from pepsinogen A. Amino acid sequence determination of the N-terminal portions of pepsinogen A and the intermediate from enabled us to elucidate the entire acid sequence of the 47-residue activation peptide segment as follow: [Formula: see text]. On the other hand, upon activation of pepsinogen A at pH 2.0 in the absence of pepstatin, cleavage of the activation segment occurred at several additional bonds. In addition, upon activation both in the presence and in the absence of pepsitatin, an additional activation intermediate, designated pepsin A', was formed in minor quantities. This form was identical with pepsin A, except that it had an additional Pro-Thr-Leu sequence preceding the N-terminal valine of pepsin A.     

Studies on the Mechanism of Activation of Pepsinogen

The mechanism of activation of pepsinogen was studied. It was found that no peptide bond cleavage occurred in the molecule of denatured pepsinogen at pH 2. It was inferred from this that a specific secondary and tertiary structure is formed in the molecule of pepsinogen in acid and that it might be necessary for the hydrolysis of the peptide bond. From the circular dichroism studies on pepsinogen and pepsin, it was found that there is a conformational change in the molecule of pepsinogen at pH 4.3~4.5 and that this change is followed by a gradual formation of pepsin.     

Difference of activation processes and structure of activation peptides in human pepsinogens A and progastricsin

The activation processes of two human pepsinogens A (pepsinogens 3 and 5) and progastricsin were compared with special attention to pepsinogens 3 and 5. Each zymogen was converted to pepsin in a stepwise manner through intermediate forms. In pepsinogens A, the major cleavage site was the Leu23-Lys24 bond and this cleavage was suggested to occur intramolecularly. When each of the pepsins A was added to the corresponding pepsinogen A exogenously, the latter was rapidly converted to pepsin, releasing the 47-residue intact activation segment. In this case, the Leu47-Val48 bond connecting the activation segment with the pepsin moiety was cleaved by an intermolecular reaction. On the other hand, when the pepsinogen A-pepstatin complex was attacked by each corresponding pepsin A added exogenously, significant cleavage by an intermolecular reaction occurred at the Asp25-Phe26 bond, generating the Phe26-intermediate form. These shifts of the cleavage sites in pepsinogens A depending on the activation conditions are likely to correlate with the conformation of the activation segment. These results can be explained consistently in terms of a proposed molecular model of activation.     

Unusual zymogen-processing properties of a mutated form of prochymosin

Site-specific mutagenesis of the gene encoding bovine prochymosin was used to produce a mutated zymogen in which seven contiguous amino acids of the N-terminal propeptide had been deleted and an eighth residue had been substituted. This altered region spans the normal site of autocatalytic proteolysis that occurs at the same time as (enzymatic) activation of prochymosin at acidic pH. Activation of the mutated zymogen at pH 4.5 was extremely slow, and cleavage occurred at an unusual Ser-Lys bond in the propeptide of the zymogen. The mutated prochymosin incubated at pH 2 generated the usual pseudochymosin by cleavage of the normal Phe-Leu bond, but at a rate severalfold slower than the authentic zymogen. These results indicate that even after deletion of seven of 42 amino acids of the propeptide the mutant protein could still assume a prochymosin (zymogen) structure, although these changes did result in striking differences in acid-catalyzed activation and processing reactions at one but not the other of the two processing sites of prochymosin.     

Nucleotide sequence and expression in Escherichia coli of cDNA of swine pepsinogen: involvement of the amino-terminal portion of the activation peptide segment in restoration of the functional protein

A clone, pSPcA2, which carries the full-length swine pepsinogen cDNA was isolated. The coding sequence comprised the signal peptide [15 amino acids (aa)], the activation peptide segment (44 aa) and mature pepsin (327 aa). The deduced amino acid sequence agrees with the published sequence with two exceptions. Asparagine instead of aspartate is present at aa positions 19 and 308. Two types of plasmids, pAS and pUCtacSPc series, were constructed for expressing swine pepsinogen cDNA. These plasmids directed the synthesis of polypeptides which were detected by employing an antibody to swine pepsinogen. However, all the polypeptides formed aggregates and showed no acid protease activity. Only the protein directed by pAS5 regained the acid protease activity after renaturation procedures. The activity was completely inhibited by pepstatin. Furthermore, the renatured pAS5 protein was spontaneously converted to pepsin under acidic conditions. The presence of Arg-8 in the activation peptide segment appears important for the stabilization of the pepsinogen molecule.     

The activation of pro-urokinase by plasma kallikrein and its inactivation by thrombin

Plasma kallikrein was found to be a good activator of pro-urokinase, the inactive zymogen form of urokinase. The complete activation of pro-urokinase by plasma kallikrein was obtained in 2 h with an enzyme/substrate weight ratio of 1/30. The rate of activation of pro-urokinase by plasma kallikrein was comparable to that catalyzed by plasmin and trypsin. The rate of activation of pro-urokinase by factor XIIa was approximately one-seventh of that by plasma kallikrein. The activation of the zymogen was due to the cleavage of a single internal peptide bond, resulting in the conversion of a single chain pro-urokinase (Mr = 55,000) into two-chain urokinase (Mr = 33,000 and 22,000), and these two chains were linked by a disulfide bond(s). These results indicate an important role of plasma kallikrein for the activation of pro-urokinase in the factor XII-dependent intrinsic pathway of fibrinolysis. Thrombin also converted pro-urokinase to a two-chain form that was not activatable by plasmin, plasma kallikrein, and factor XIIa. Thrombin specifically cleaved the Arg 156-Phe 157 bond which is located 2 residues prior to the activation site of Lys 158-Ile 159.     

Activation of human pepsinogens

Human pepsinogen A3 and A5 have been purified to chromatographic and electrophoretic homogeneity. At pH 2 pepsinogen A3 activates at a much faster rate than pepsinogen A5. Leu-23-Lys-24 is the first bond cleaved during activation of pepsinogen A3. This bond is also cleaved in pepsinogen A5, but together with the cleavage of Asp-25-Phe-26. Amino acid sequencing shows that pepsinogen A3 has Glu at position 43, whereas pepsinogen A5 has Lys.     

Purification of Japanese monkey prostate acid protease zymogen and its identification as a pepsinogen C-like zymogen

A pepsinogen C-like acid protease zymogen was found in Japanese monkey prostate extract and seminal plasma by means of the double immunodiffusion method using rabbit anti-pepsinogen C antiserum, and was purified from the prostate by a combination of ammonium sulfate fractionation, DEAE-Sephacel chromatography, Sephadex G-100 gel filtration, and immunoadsorption to an anti-pepsinogen C column. The zymogen was purified 6,400-fold in a yield of 13.1%. The purified zymogen gave a single band on polyacrylamide gel electrophoresis both in the presence and absence of sodium dodecyl sulfate. The zymogen was converted to the active form by acid treatment at pH 2.8 for 4 h with concurrent reduction of the molecular weight from 41,000 to 36,000. By the double immunodiffusion method, prostate pepsinogen C-like acid protease zymogen, pepsinogen C, lung procathepsin D-II, and their active forms gave a single, fused precipitin line in agar plate with anti-pepsinogen C antiserum, which did not react with cathepsin D and pepsinogen A. Furthermore, the optimal pH of 2.5-3.0, the effect of pepstatin on the activity, and the amino acid compositions were also in good agreement among these three zymogens, showing that they are very similar protease zymogens.     

N-terminal sequence of swine pepsinogen and pepsin. The site of pepsinogen activation

The sequence of 119 amino acids of swine pepsinogen comprising the fragment released during the zymogen activation as well as the N-terminal part of pepsin is established. The activation of swine pepsinogen is shown to be accompanied by specific cleavage of Leu-Ile bond in the sequence:

$\text{Ala}\text{41}\text{Ala Ala Leu Ile}\text{Gly}\text{46}$

where Ile-45 represents the N-terminal residue of pepsin. This sequence is attacked in the course of pepsinogen activation by external enzymes — neutral proteinases and elastase.     

Monkey pepsinogens and pepsins. VI. One-step activation of Japanese monkey pepsinogen to pepsin

When Japanese monkey pepsinogen was activated at pH 2.0 in the absence of pepstatin, the activation segment of the amino(N)-terminal 47 residues was released as a single intact polypeptide. This clearly shows that the pepsinogen was activated to pepsin directly. This direct activation was called a 'one-step' process. On the other hand, when pepsinogen was activated at pH 2.0 in the presence of pepstatin, an appreciable amount of pepsinogen was converted to an intermediate form between pepsinogen and pepsin, although a part of pepsinogen was activated directly to pepsin. The intermediate form was generated by releasing the N-terminal 25 residues of pepsinogen. This activation through the intermediate form is thought to be a 'two-step' or 'stepwise-activating' process involving a bimolecular reaction between pepstatin-bound pepsinogen and free pepsin.