Transfer of recA protein from one polynucleotide to another. Kinetic evidence for a ternary intermediate during the transfer reaction

We have analyzed the transfer kinetics of recA protein from one polynucleotide to another by monitoring the change in fluorescence of a modified single-stranded M13 DNA, referred to as etheno M13 DNA, that accompanies recA protein dissociation. The observed rate of transfer is dependent on the concentration of competitor polynucleotide, polythymidylic acid (poly(dT]; increasing the poly(dT) concentration increases the rate of transfer. These data are inconsistent with the rate-limiting step in the transfer mechanism occurring by a simple dissociation process. Under certain conditions, the apparent rate constant displays plateau behavior at high poly(dT) concentrations. This result is indicative of transfer occurring through a ternary intermediate including etheno M13 DNA and poly(dT). The transfer reaction was found to occur through two kinetically distinct species of transferring recA protein X DNA complexes. The relative amounts of these two species was affected by both the MgCl2 and protein concentration, suggesting that the two kinetic components reflect different aggregation states of the recA protein X DNA complex. Because etheno M13 DNA and poly(dT) contain no complementary sequences, we have concluded that recA protein has the intrinsic ability to form a kinetic ternary intermediate with two separate single-stranded DNA molecules in the absence of homology.     

Active nucleoprotein filaments of single-stranded binding protein and recA protein on single-stranded DNA have a regular repeating structure.

When E. coli single-stranded DNA binding protein (SSB) coats single-stranded DNA (ssDNA) in the presence of 1 mM MgCl2 it inhibits the subsequent binding of recA protein, whereas SSB binding to ssDNA in 12 mM MgCl2 promotes the binding of recA protein. These two conditions correspond respectively to those which produce 'smooth' and 'beaded' forms of ssDNA-SSB filaments. By gel filtration and immunoprecipitation we observed active nucleoprotein filaments of recA protein and SSB on ssDNA that contained on average 1 monomer of recA protein per 4 nucleotides and 1 monomer of SSB per 20-22 nucleotides. Filaments in such a mixture, when digested with micrococcal nuclease produced a regular repeating pattern, approximately every 70-80 nucleotides, that differed from the pattern observed when only recA protein was bound to the ssDNA. We conclude that the beaded ssDNA-SSB nucleoprotein filament readily binds recA protein and forms an intermediate that is active in the formation of joint molecules and can retain substantially all of the SSB that was originally bound.     

recA protein filaments bind two molecules of single-stranded DNA with off rates regulated by nucleotide cofactor

To probe the role of nucleotide cofactor in the binding of single-stranded DNA to recA protein, we have developed a sedimentation assay using 5'-labeled 32P-poly(dT).recA.poly(dT) complexes sediment quantitatively when centrifuged at 100,000 x g for 45 min, whereas free poly(dT) remains in the supernatant. In the presence of ATP, between 6 and 7 bases cosediment per recA monomer; but when ADP is present or in the absence of added nucleotide cofactor, only 3-3.5 bases/recA monomer cosediment. In competition experiments in which recA.32P-poly(dT) complexes are incubated with unlabeled poly(dT), we again find 3-3.5 bases of labeled poly(dT) cosedimenting per recA monomer when no nucleotide cofactor is present. However, when the same experiment is performed with ATP, only half of the expected 6-7 bases of labeled poly(dT) remain bound to the DNA, demonstrating that half of the poly(dT) in the complex exchanges rapidly with free poly(dT), whereas the other half equilibrates slowly, like poly(dT) in the absence of nucleotide. The rate of exchange of the second more tightly bound poly(dT) is accelerated when ADP is present. Our observations are rationalized by a model in which each recA protein helical filament binds two strands of poly(dT) with a stoichiometry of 3-3.5 bases/recA monomer/strand.     

Binding of RecA protein to single-stranded nucleic acids: spectroscopic studies using fluorescent polynucleotides

Binding of the recA gene product from Escherichia coli to single-stranded polynucleotides has been investigated using poly(dA) that have been modified by chloroacetaldehyde to yield fluorescent 1,N6-ethenoadenine (epsilon A) bases. A strong enhancement of the fluorescent quantum yield of poly(d epsilon A) is induced upon RecA protein binding. A 4-fold increase is observed in the absence of ATP or ATP gamma S and a 7-fold increase in the presence of either nucleoside triphosphate. RecA protein can bind to poly(d epsilon A) in the absence of both Mg2+ ions and ATP (or ATP gamma S) but Mg2+ ions are required to observe RecA protein binding in the presence of ATP (or ATP gamma S) at pH 7.5. ATP binding to the RecA-poly(d epsilon A) complex induces a dissociation of RecA from the polynucleotide followed by re-binding of [RecA-ATP-Mg2+] ternary complex. Whereas ATP-induced dissociation of RecA-poly(d epsilon A) complexes is a fast process, the subsequent binding reaction of [RecA-ATP-Mg2+] is slow. A model is proposed whereby [RecA-ATP-Mg2+] binding to poly(d epsilon A) involves slow nucleation and elongation processes along the polynucleotide backbone. The nucleation reaction is shown to involve at least a trimer or a tetramer. Polymerization of the [RecA-ATP-Mg2+] ternary complex stops when the polynucleotide is entirely covered with 6 +/- 1 nucleotides per RecA monomer. ATP hydrolysis then induces a release of RecA-ADP complexes from the polynucleotide template.     

Interaction of the recA protein of Escherichia coli with single-stranded DNA

The interaction of recA protein with single-stranded (ss) phi X174 DNA has been examined by means of a nuclease protection assay. The stoichiometry of protection was found to be 1 recA monomer/approximately 4 nucleotides of ssDNA both in the absence of a nucleotide cofactor and in the presence of ATP. In contrast, in the presence of adenosine 5'-O-(thiotriphosphate) (ATP gamma S) the stoichiometry was 1 recA monomer/approximately 8 nucleotides. No protection was seen with ADP. In the absence of a nucleotide cofactor, the binding of recA protein to ssDNA was quite stable as judged by equilibration with a challenge DNA (t1/2 approximately 30 min). Addition of ATP stimulated this transfer (t1/2 approximately 3 min) as did ADP (t1/2 approximately 0.2 min). ATP gamma S greatly reduced the rate of equilibration (t1/2 greater than 12 h). Direct visualization of recA X ssDNA complexes at subsaturating recA protein concentrations using electron microscopy revealed individual ssDNA molecules partially covered with recA protein which were converted to highly condensed networks upon addition of ATP gamma S. These results have led to a general model for the interaction of recA protein with ssDNA.     

Cooperative, excluded-site binding and its dynamics for the interaction of gene 5 protein with polynucleotides

The binding of gene 5 protein to various single-stranded polynucleotides is investigated by fluorescence titrations and stopped-flow measurements. The association state of gene 5 protein itself is analyzed by equilibrium sedimentation: the monomer-dimer equilibrium found in the micromolar concentration range is described by a stability constant of 8 X 10(5) M-1. The fluorescence quenching upon binding to polynucleotides, studied over a broad concentration range and analyzed in terms of a cooperative excluded-site binding model, provides binding constants for "isolated" and for "cooperative" sites. The cooperativity for various ribo- and deoxyribopolymers is between 400 and 800 and is virtually independent of the ionic strength. The binding to isolated sites is strongly dependent upon the ionic strength; analysis in terms of polyelectrolyte theory indicates the compensation of 4 +/- 0.5 charges upon complex formation. The number of nucleotide residues covered by one protein molecule is also found to be 4 +/- 0.5 units. The affinity of gene 5 protein for polynucleotides increases in the series poly(C) less than poly(dA) less than poly(A) less than poly(U) much less than poly(dT); the binding constant for poly(dT) is roughly a factor of 1000 higher than that for the other polymers. Model studies with Lys-Tyr-Lys and Lys-Trp-Lys suggest that the preferential interaction with poly(dT) is not simply due to enhanced stacking interactions between the aromatic amino acids and the thymine residues. Stopped-flow reaction curves obtained by mixing of gene 5 protein with poly(dT) in the micromolar concentration range show three relaxation processes with time constants between 1 ms and 1 s.(ABSTRACT TRUNCATED AT 250 WORDS)     

Binding of IKe gene 5 protein to polynucleotides. Fluorescence binding experiments of IKe gene 5 protein and mutual cooperativity of IKe and M13 gene 5 proteins

Fluorescence studies of the binding of IKe gene 5 protein to various polynucleotides were performed to obtain insight into the question as to what extent the binding characteristics of the gene 5 proteins of the IKe and M13 phages resemble and/or differ from each other. The fluorescence of IKe gene 5 protein is quenched 60% upon binding to most polynucleotides. At moderate salt concentrations, i.e., below 1 M salt, the binding stoichiometry is 4.0 +/- 0.5 nucleotides per IKe gene 5 protein monomer. The affinity of the protein for homopolynucleotides depends strongly on sugar and base type; in order of increasing affinities we find poly(rC) less than poly(dA) less than poly(rA) less than poly(dI) less than poly(rU) less than poly(dU) less than poly(dT). For most polynucleotides studied, the affinity depends linearly on the salt concentration: [d log (Kint omega)]/(d log [M+]) = -3. The binding is highly cooperative. The cooperativity parameter omega, as deduced from protein titration curves, is 300 +/- 150 and appears independent of the type of polynucleotide studied. Estimation of this binding parameter from salt titrations of gene 5 protein-polynucleotide complexes results in systematically higher values. A comparison of the binding data of the IKe and M13 gene 5 proteins shows that the fluorescence quenching, stoichiometry, order of binding affinities, and cooperativity in the binding are similar for both proteins. From this it is concluded that at least the DNA binding grooves of both proteins must show a close resemblance.(ABSTRACT TRUNCATED AT 250 WORDS)     

Effects of Escherichia coli SSB protein on the single-stranded DNA-dependent ATPase activity of Escherichia coli RecA protein: Evidence that SSB protein facilitates the binding of RecA protein to regions of secondary structure within single-stranded DNA

The effect that Escherichia coli single-stranded DNA binding (SSB) protein has on the single-stranded DNA-dependent ATPase activity of RecA protein is shown to depend upon a number of variables such as order of addition, magnesium concentration, temperature and the type of single-stranded DNA substrate used. When SSB protein is added to the DNA solution prior to the addition of RecA protein, a significant inhibition of ATPase activity is observed. Also, when SSB protein is added after the formation of a RecA protein-single-stranded DNA complex using either etheno M13 DNA, poly(dA) or poly(dT), or using single-stranded phage M13 DNA at lower temperature (25 °C) and magnesium chloride concentrations of 1 mm or 4 mm, a time-dependent inhibition of activity is observed. These results are consistent with the conclusion that SSB protein displaces the RecA protein from these DNA substrates, as described in the accompanying paper. However, if SSB protein is added last to complexes of RecA protein and single-stranded M13 DNA at elevated temperature (37 °C) and magnesium chloride concentrations of 4 mm or 10 mm, or to poly(dA) and poly(dT) that was renatured in the presence of RecA protein, no inhibition of ATPase activity is observed; in fact, a marked stimulation is observed for single-stranded M13 DNA. A similar effect is observed if the bacteriophage T4-coded gene 32 protein is substituted for SSB protein. The apparent stoichiometry of DNA (nucleotides) to RecA protein at the optimal ATPase activity for etheno M13 DNA, poly(dA) and poly(dT) is 6(±1) nucleotides per RecA protein monomer at 4 mm-MgCl₂ and 37 °C. Under the same conditions, the apparent stoichiometry obtained using single-stranded M13 DNA is 12 nucleotides per RecA protein monomer; however, the stoichiometry changes to 4.5 nucleotides per RecA protein monomer when SSB protein is added last. In addition, a stoichiometry of four nucleotides per RecA protein can be obtained with single-stranded M13 DNA in the absence of SSB protein if the reactions are carried out in 1 mm-MgCl₂. These data are consistent with the interpretation that secondary structure within the natural DNA substrate limits the accessibility of RecA protein to these regions. The role of SSB protein is to eliminate this secondary structure and allow RecA protein to bind to these previously inaccessible regions of the DNA. In addition, our results have disclosed an additional property of the RecA protein-single-stranded DNA complex: namely, in the presence of complementary base-pairing and at elevated temperatures and magnesium concentrations, a unique RecA protein-DNA complex forms that is resistant to inhibition by SSB protein.     

Homology-dependent changes in adenosine 5'-triphosphate hydrolysis during recA protein promoted DNA strand exchange: evidence for long paranemic complexes

As a first step in DNA strand exchange, recA protein forms a filamentous complex on single-stranded DNA (ssDNA), which contains stoichiometric (one recA monomer per four nucleotides) amounts of recA protein. recA protein monomers within this complex hydrolyze ATP with a turnover number of 25 min-1. Upon introduction of linear homologous duplex DNA to initiate strand exchange, this rate of ATP hydrolysis drops by 33%. The decrease in rate is complete in less than 2 min, and the rate of ATP hydrolysis then remains constant during and subsequent to the strand exchange reaction. This drop is completely dependent upon homology in the duplex DNA. In addition, the magnitude of the drop is linearly dependent upon the length of the homologous region in the linear duplex DNA. Linear DNA substrates in which pairing is topologically restricted to a paranemic joint also follow this relationship. Taken together, these properties imply that all of the available homology in the incoming duplex DNA is detected very early in the DNA strand exchange reaction, with the linear duplex DNA paired paranemically with the homologous ssDNA in the complex throughout its length. The results indicate that paranemic joints can extend over thousands of base pairs. We note elsewhere [Pugh, B. F., & Cox, M. M. (1987b) J. Biol. Chem. 262, 1337-1343] that this duplex acquires resistance to digestion by DNase with a much slower time course (30 min), which parallels the progress of strand exchange. Together these results imply that the duplex DNA is paired with the ssDNA but remains outside the nucleoprotein filament. Finally, the results also support the notion that ATP hydrolysis occurs throughout the recA nucleoprotein filament.     

Purification and characterization of the coliphage N4-coded single-stranded DNA binding protein

We have purified and characterized a single-stranded DNA binding protein (N4 SSB) induced after coliphage N4 infection. It has a monomeric molecular weight of 31,000 and contains 10 tyrosine and 1-2 tryptophan amino acid residues. Its fluorescence spectrum is dominated by the tyrosine residues, and their fluorescence is quenched when the protein binds single-stranded DNA. Fluorescence quenching was used as an assay to quantitate binding of the protein to single-stranded nucleotides. The N4 single-stranded DNA binding protein binds cooperatively to single-stranded nucleic acids and binds single-stranded DNA more tightly than RNA. The binding involves displacement of cations from the DNA and anions from the protein. The apparent binding affinity is very salt-dependent, decreasing as much as 1,000-fold for a 10-fold increase in NaCl concentration. The degree of cooperativity (omega) is relatively independent of salt concentration. At 37 degrees C in 0.22 M NaCl, the protein has an intrinsic binding constant for M13 viral DNA of 3.8 x 10(4) M-1, a cooperativity factor omega of 300, and binding site size of 11 nucleotides per monomer. The protein lowers the melting point of poly(dA.dT).poly(dA-dT) by greater than 60 degrees C but cannot lower the melting transition or assist in the renaturation of natural DNA. N4 single-stranded DNA binding protein enhances the rate of DNA synthesis catalyzed by the N4 DNA polymerase by increasing the processivity of the N4 DNA polymerase and melting out hairpin structures that block polymerization.     

The binding affinity of Ff gene 5 protein depends on the nearest-neighbor composition of the ssDNA substrate

The Ff gene 5 protein (g5p) is considered to be a nonspecific single-stranded DNA binding protein, because it binds cooperatively to and saturates the Ff bacteriophage single-stranded DNA genome and other single-stranded polynucleotides. However, the binding affinity Komega (the intrinsic binding constant times a cooperativity factor) differs by over an order of magnitude for binding to single-stranded polynucleotides such as poly[d(A)] and poly[d(C)]. A polynucleotide that is more stacked, like poly[d(A)], binds more weakly than one that is less stacked, like poly[d(C)]. To test the hypothesis that DNA base stacking, a nearest-neighbor property, is involved in the binding affinity of the Ff g5p for different DNA sequences, Komega values were determined as a function of NaCl concentration for binding to six synthetic sequences 48 nucleotides in length: dA48, dC48, d(AAC)16, d(ACC)16, d(AACC)12, and d(AAACC)9A3. The binding affinities of the protein for these sequences were indeed found to be related to the nearest-neighbor compositions of the sequences, rather than to simple base compositions. That is, the g5p binding site, which is spanned by four nucleotides, discriminates among these sequences on the basis of the relative numbers of nearest neighbors (AA, CC, and AC plus CA) in the sequence. The results support the hypothesis that the extent of base stacking/unstacking of the free, nonbound ssDNA plays an important role in the binding affinity of the Ff gene 5 protein.     

recA protein promoted DNA strand exchange

recA protein and circular single-stranded DNA form a stable complex in the presence of single-stranded DNA binding protein (SSB), in which one recA protein monomer is bound per two nucleotides of DNA. These complexes are kinetically significant intermediates in the exchange of strands between the single-stranded DNA and an homologous linear duplex. After completion of strand exchange, the recA protein remains tightly associated with the circular duplex product of the reaction and the SSB is bound to the displaced linear single strand. Upon addition of ADP, the recA protein-duplex DNA complex dissociates. RecA protein also interacts with single-stranded DNA in the absence of SSB; however, the amount of recA protein bound is substantially reduced. These findings provide direct physical evidence for the participation of SSB in the formation of the recA protein-single-stranded DNA complexes inferred earlier from kinetic analysis. Moreover, they confirm the ability of recA protein to equilibrate between bound and free forms in the absence of SSB.     

Escherichia coli thioredoxin stabilizes complexes of bacteriophage T7 DNA polymerase and primed templates

The DNA polymerase activity induced after bacteriophage T7 infection of Escherichia coli is found in a complex of two proteins, the T7 gene 5 protein and a host protein, thioredoxin. Gene 5 protein is a DNA polymerase and a 3' to 5' exonuclease. Thioredoxin binds tightly to the gene 5 protein and increases the processivity of polymerization some 1000-fold. Gene 5 protein forms a short-lived complex with the primer-template, poly(dA).oligo(dT), in the absence of Mg2+ and nucleotides. Thioredoxin increases the half-life of the preformed primer-template-polymerase complex from less than a second to approximately 5 min. The dissociation is accelerated by excess single-stranded DNA in an apparent second order reaction, indicating direct transfer of polymerase between DNA fragments. Thioredoxin also reduces the equilibrium dissociation constant, Kd, of the gene 5 protein -poly(dA).oligo(dT) complex 20- to 80-fold. The salt dependence of Kd indicates that thioredoxin stabilizes the primer-template-polymerase complex mainly through additional charge-charge interactions, increasing the estimated number of interactions from 2 to 7. The affinity of gene 5 protein for single-stranded DNA is at least 1000-fold higher than for double-stranded DNA and is little affected by thioredoxin. Under conditions of steady state synthesis the effect of thioredoxin on the polymerization rate is determined by two competing factors, an increase in processivity and a decrease of the dissociation rate of polymerase and replicated template.     

The physical and enzymatic properties of Escherichia coli recA protein display anion-specific inhibition.

The enzymatic activities of Escherichia coli recA protein are sensitive to ionic composition. Here we report that sodium glutamate (NaGlu) is much less inhibitory to the DNA strand exchange, DNA-dependent ATPase, and DNA binding activities of the recA protein than is NaCl. Both joint molecule formation and complete exchange of DNA strands occur (albeit at reduced rates) at NaGlu concentrations as high as 0.5 M whereas concentrations of NaCl greater than 0.2 M are sufficient for complete inhibition. The single-stranded DNA (ssDNA)-dependent ATPase activity is even less sensitive to inhibition by NaGlu; ATP hydrolysis stimulated by M13 ssDNA is unaffected by 0.5 M NaGlu and is further stimulated by E. coli ssDNA binding protein approximately 2-fold. Finally, NaGlu has essentially no effect on the stability of recA protein-epsilon M13 DNA complexes, with concentrations of NaGlu as high as 1.5 M failing to dissociate the complexes. Surprisingly, NaGlu also has little effect on the concentration of NaCl required to disrupt the recA protein-epsilon M13 DNA complex, demonstrating that destabilization is dependent on both the concentration and type of anionic rather than cationic species. Quantitative analysis of DNA binding isotherms establishes that the intrinsic binding affinity of recA protein is affected by the anionic species present and that the cooperativity parameter is relatively unaffected. Consequently, the sensitivity of recA protein-ssDNA complexes to disruption by NaCl does not result from the competitive effects associated with cation displacement from the ssDNA upon protein binding but rather results from anion displacement upon complex formation. The magnitude of this anion-specific effect on ssDNA binding is large relative to that of other nucleic acid binding proteins.     

ATP-independent renaturation of complementary DNA strands by the mutant recA1 protein from Escherichia coli

In an effort to clarify the requirement for ATP in the recA protein-promoted renaturation of complementary DNA strands, we have analyzed the mutant recA1 protein which lacks single-stranded DNA-dependent ATPase activity at pH 7.5. Like the wild type, the recA1 protein binds to single-stranded DNA with a stoichiometry of one monomer per approximately four nucleotides. However, unlike the wild type, the mutant protein is dissociated from single-stranded DNA in the presence of ATP or ADP. The ATP analogue adenosine 5'-O-3' (thiotriphosphate) appears to stabilize the binding of recA1 protein to single-stranded DNA but does not elicit the stoichiometry of 1 monomer/8 nucleotides or the formation of highly condensed protein-DNA networks that are characteristic of the wild type recA protein in the presence of this analogue. The recA1 protein does not catalyze DNA renaturation in the presence of ATP, consistent with the dissociation of recA1 protein from single-stranded DNA under these conditions. However, it does promote a pattern of Mg2+-dependent renaturation identical to that found for wild type recA protein.     

Antitemplate effect of polynucleotides and their hybrid complexes

In continuation of efforts to correlate the antitemplate activities of modified polynucleotides with their structure, and to understand the factors governing both their potency and stability, a group of single-stranded poly(ribo- and deoxyribo-) nucleotides, and the "hybrid" double-stranded complexes were prepared and investigated. The double-stranded hybrid poly(A,hs5U).poly(dT) section was found to be more stable to murine blood nucleases than was the single-stranded poly(A,hs5U). In a comparative study as inhibitors of the DNA polymerase alpha from rat hepatoma, the results showed that the modified polynucleotides were more potent than the unmodified ones, in general, the polydeoxyribonucleotides were better antitemplates than their ribo counterparts and the poly(A70,hs5U30).poly(dT) hybrid was more active than either of the single-stranded components. Thus it is possible to increase the nuclease resistance of the modified polyribonucleotides by forming hybrid complexes with complementary polydeoxyribonucleotides, and at the same time, to augment their antitemplate activities.     

Circular dichroism and fluorescence analysis of the interaction of Pf1 gene 5 protein with poly(dT)

Circular dichroism (c.d.) and fluorescence spectroscopy have been used to investigate the interaction of the gene 5 protein of the filamentous bacteriophage Pf1 with single-stranded DNA. The c.d. spectrum of the Pf1 gene 5 protein is consistent with the absence of any significant alpha-helical content. The negative c.d. peak in the region of 210 nm, which arises from the protein, is diminished in the complex with poly(dT). Likewise, the c.d. peak at 265 nm arising from the poly(dT) decreases when the Pf1 gene 5 protein is bound, c.d. titrations of poly(dT) with Pf1 gene 5 protein indicate strong binding with a stoichiometry (n) of four nucleotides per protein subunit. In contrast, when the titrations were done using fluorescence anisotropy or fluorescence spectral shifts to follow binding, apparent stoichiometries between n = 2 and n = 4 were observed, often in the same experiment, depending on precise conditions. The results are interpreted in terms of two distinct modes of binding, in which either one or two subunits of the protein dimer are bound to the polynucleotide lattice, but still retaining the same local interaction with the DNA, with each binding site covering four nucleotides. The apparent stoichiometry of 2 results from the interaction of only one subunit of the dimer with the nucleic acid lattice, when protein is in excess. The second, unfilled, subunit of the dimer is nevertheless incorporated into the complex, resulting in the maximum possible fluorescence change when only half the sites are filled, since the fluorescence properties of the complex arise from protein-protein contacts associated with co-operative binding to the lattice. Further experiments in which the order of addition of components is changed, and the concentration of MgCl2 is varied, show that both of these factors are important in determining the dominant binding mode. In the absence of salt, dissociation and redistribution of the polynucleotide can occur following the addition of excess protein. This transition is suppressed in the presence of greater than 3 mM-MgCl2.     

Transfer of recA protein from one polynucleotide to another. Effect of ATP and determination of the processivity of ATP hydrolysis during transfer

The transfer of recA protein from a fluorescently modified single-stranded DNA, containing 1,N6-ethenoadenosine and 3,N4-ethenocytosine, to polydeoxythymidylic acid (poly(dT)) was shown to occur by a complex mechanism in both the absence and presence of ADP (Menetski, J. P., and Kowalczykowski, S. C. (1987) J. Biol. Chem. 262, 2085-2092). A part of the mechanism involves the formation of a kinetic ternary intermediate. Since the binding and hydrolysis of ATP by recA protein is involved in many of the recA protein in vitro activities, we have analyzed the effect of ATP on the transfer reaction. In the presence of ATP, the transfer reaction is dependent on the concentration of the competitor single-stranded DNA, poly(dT). This result suggests that transfer does not occur by a simple dissociation mechanism. The reaction occurs via two kinetically distinct species of protein X DNA complexes with properties that are similar to those characterized for the transfer reaction in the absence of ATP. There is a complicated effect of nucleotide concentration on the rate of transfer. At low concentrations of ATP (less than 50 microM), increasing nucleotide concentration increases the rate of transfer; this is similar to the effect of ADP. However, at high concentrations of ATP (greater than 50 microM), increasing ATP concentration decreases the rate of transfer. Finally, the processivity of ATP hydrolysis during transfer was found to increase with increases in ATP concentration. Less than one ATP molecule was hydrolyzed per transfer event at low ATP concentrations (less than 20 microM) while greater than 50 molecules were hydrolyzed at high ATP concentration (greater than 250 microM). These data suggest that the rate of transfer is not directly coupled to the rate of hydrolysis.     

Saccharomyces cerevisiae replication protein A binds to single-stranded DNA in multiple salt-dependent modes

We have examined the single-stranded DNA (ssDNA) binding properties of the Saccharomyces cerevisiae replication protein A (scRPA) using fluorescence titrations, isothermal titration calorimetry, and sedimentation equilibrium to determine whether scRPA can bind to ssDNA in multiple binding modes. We measured the occluded site size for scRPA binding poly(dT), as well as the stoichiometry, equilibrium binding constants, and binding enthalpy of scRPA-(dT)L complexes as a function of the oligodeoxynucleotide length, L. Sedimentation equilibrium studies show that scRPA is a stable heterotrimer over the range of [NaCl] examined (0.02-1.5 M). However, the occluded site size, n, undergoes a salt-dependent transition between values of n = 18-20 nucleotides at low [NaCl] and values of n = 26-28 nucleotides at high [NaCl], with a transition midpoint near 0.36 M NaCl (25.0 degrees C, pH 8.1). Measurements of the stoichiometry of scRPA-(dT)L complexes also show a [NaCl]-dependent change in stoichiometry consistent with the observed change in the occluded site size. Measurements of the deltaH(obsd) for scRPA binding to (dT)L at 1.5 M NaCl yield a contact site size of 28 nucleotides, similar to the occluded site size determined at this [NaCl]. Altogether, these data support a model in which scRPA can bind to ssDNA in at least two binding modes, a low site size mode (n = 18 +/- 1 nucleotides), stabilized at low [NaCl], in which only three of its oligonucleotide/oligosaccharide binding folds (OB-folds) are used, and a higher site size mode (n = 27 +/- 1 nucleotides), stabilized at higher [NaCl], which uses four of its OB-folds. No evidence for highly cooperative binding of scRPA to ssDNA was found under any conditions examined. Thus, scRPA shows some behavior similar to that of the E. coli SSB homotetramer, which also shows binding mode transitions, but some significant differences also exist.     

Single-stranded DNA binding protein from calf thymus. Purification, properties, and stimulation of the homologous DNA-polymerase-alpha-primase complex.

A binding protein for single-stranded DNA (ssDNA) was purified from calf thymus to near homogeneity by chromatography on DEAE-cellulose, blue-Sepharose, ssDNA-cellulose and FPLC Mono Q. The most purified fraction consisted of four polypeptides with molecular masses of 70, 55, 30, and 11 kDa. The polypeptide with the molecular mass of 55 kDa is most likely a degraded form of the largest polypeptide. The complex migrated as a whole on both glycerol gradient ultracentrifugation (s = 5.1 S) and gel filtration (Stokes' radius approximately 5.1 nm). Combining these data indicates a native molecular mass of about 110 kDa, which is in accord with a 1:1:1 stoichiometry for the 70 + 55/30/11-kDa complex. The ssDNA binding protein (SSB) covered approximately 20-25 nucleotides on M13mp8 ssDNA, as revealed from both band shift experiments and DNase I digestion studies. The homologous DNA-polymerase-alpha-primase complex was stimulated by the ssDNA binding protein 1.2-fold on poly(dA).(dT)14 and 10-13-fold on singly primed M13mp8 DNA. Stimulation was mainly due to facilitated DNA synthesis through stable secondary structures, as demonstrated by the vanishing of many, but not all, pausing sites. Processivity of polymerase-primase was not affected on poly(dA).(dT)14; with poly(dT).(rA)10 an approximately twofold increase in product lengths was observed when SSB was present. The increase was attributed to a facilitated rebinding of polymerase alpha to an already finished DNA fragment rather than to an enhancement of the intrinsic processivity of the polymerase. Similarly, products 300-600 nucleotides long were formed on singly primed M13 DNA in the presence of SSB, in contrast to 20-120 nucleotides when SSB was absent. DNA-primase-initiated DNA replication on M13 DNA was inhibited by SSB in a concentration-dependent manner. However, with less sites available to begin with RNA priming, more homogeneous products were formed.