Increased synthesis of α‐tocopherol,paramylon and tyrosine by Euglena gracilis under conditions of high biomass production

Aims: To analyse the production of different metabolites by dark‐grown Euglena gracilis under conditions found to render high cell growth. Methods and Results: The combination of glutamate (5 g l^?1), malate (2 g l^?1) and ethanol (10 ml l^?1) (GM + EtOH); glutamate (7·15 g l^?1) and ethanol (10 ml l^?1); or malate (8·16 g l^?1), glucose (10·6 g l^?1) and NH₄Cl (1·8 g l^?1) as carbon and nitrogen sources, promoted an increase of 5·6, 3·7 and 2·6‐fold, respectively, in biomass concentration in comparison with glutamate and malate (GM). In turn, the production of α‐tocopherol after 120 h identified by LC‐MS was 3·7 ± 0·2, 2·4 ± 0·1 and 2 ± 0·1 mg [g dry weight (DW)]^?1, respectively, while in the control medium (GM) it was 0·72 ± 0·1 mg (g DW)^?1. For paramylon synthesis, the addition of EtOH or glucose induced a higher production. Amino acids were assayed by RP‐HPLC; Tyr a tocopherol precursor and Ala an amino acid with antioxidant activity were the amino acids synthesized at higher concentration. Conclusions: Dark‐grown E. gracilis Z is a suitable source for the generation of the biotechnologically relevant metabolites tyrosine, α‐tocopherol and paramylon. Significance and Impact of the Study: By combining different carbon and nitrogen sources and inducing a tolerable stress to the cell by adding ethanol, it was possible to increase the production of biomass, paramylon, α‐tocopherol and some amino acids. The concentrations of α‐tocopherol achieved in this study are higher than others reported previously for Euglena, plant and algal systems. This work helps to understand the effect of different carbon sources on the synthesis of bio‐molecules by E. gracilis and can be used as a basis for future works to improve the production of different metabolites of biotechnological importance by this organism.     

Comparison of supplements* to enhance recovery of heat‐injured Salmonella from egg albumen

Aims: The purpose of this study was to determine the proficiency of supplements to enhance the recovery of Salmonella from heat‐treated liquid egg albumen on solid agar media. Methods and Results: Salmonella‐inoculated albumen, heated at 53·3°C for 4 min, was plated on 39 combinations of solid media with or without the addition of 12 supplements. Greater numbers of Salmonella (P < 0·05) recovered with the addition of 1·0 g l^?1 ferrous sulfate (FeSO₄) than with any other supplements, except for 0·5 or 1·0 g l^?1 3′3′‐thiodipropionic acid (TDP), which recovered equivalent populations. Addition of 1·0 g l^?1 sodium pyruvate or 6·0 g l^?1 yeast extract plus 1·0 g l^?1 sodium pyruvate supported greater resuscitation than unsupplemented tryptic soy agar (TSA) or supplementing with 0·01 or 0·1 g l^?1 N‐propyl gallate, 10 g l^?1 activated charcoal, 0·1 g l^?1 KMnO₄ or 50 mg l^?1 ethoxyquin. The remaining supplements supported recovery of equivalent numbers of Salmonella, which were fewer cells than recovered with 1·0 g l^?1 FeSO₄, yet greater populations than recovered with 50 mg l^?1 ethoxyquin. Conclusion: Supplementation of plating media with FeSO₄, TDP or sodium pyruvate enhanced recovery of sublethally injured Salmonella from albumen. Significance and Impact of the Study: Pasteurizing albumen impedes recovery of pathogens. These results suggest that the addition of supplements to plating media may assist resuscitation and colony development of heat‐injured salmonellae.     

Endospore dipicolinic acid detection during Bacillus thuringiensis culture

Aims: The aim of this work was to detect Bacillus thuringiensis endospore production during fermentation under conditions hindering endospore detection, i.e. in a complex undefined industrial medium with a high content of solids in suspension. Methods and Results: Bacterial endospore production was measured using the photoluminescence of dipicolinate (DPA) with Tb³⁺. The high temperature and pressure of a conventional autoclave was used to release DPA from the endospores. The endospore was obtained from B. thuringiensis var. kurstaki HD‐73 fermentations in industrial‐type media with 25·1 and 54·1 g l^?1 glucose, 4·4 and 35·3 g l^?1 soybean meal, 5·8 g l^?1 yeast extract, 9·2 g l^?1 corn steep solids and mineral salts. Conclusions: In this study, we successfully determined the DPA concentrations during the culture of B. thuringiensis in high‐concentration soybean meal media. A good correlation was found between microscope endospore counting and DPA measurements in the cultures. Significance and Impact of the Study: Because of synergy between Cry protein and endospore in B. thuringiensis bioinsecticides formulation, it is important to be able to determine endospore development during B. thuringiensis industrial‐type fermentation, in order to ascertain the beginning of sporulation.     

Efficient aerobic succinate production from glucose in minimal medium with Corynebacterium glutamicum

Corynebacterium glutamicum, an established industrial amino acid producer, has been genetically modified for efficient succinate production from the renewable carbon source glucose under fully aerobic conditions in minimal medium. The initial deletion of the succinate dehydrogenase genes (sdhCAB) led to an accumulation of 4.7 g l^?1 (40 mM) succinate as well as high amounts of acetate (125 mM) as by‐product. By deleting genes for all known acetate‐producing pathways (pta‐ackA, pqo and cat) acetate production could be strongly reduced by 83% and succinate production increased up to 7.8 g l^?1 (66 mM). Whereas overexpression of the glyoxylate shunt genes (aceA and aceB) or overproduction of the anaplerotic enzyme pyruvate carboxylase (PCx) had only minor effects on succinate production, simultaneous overproduction of pyruvate carboxylase and PEP carboxylase resulted in a strain that produced 9.7 g l^?1 (82 mM) succinate with a specific productivity of 1.60 mmol g (cdw)^?1 h^?1. This value represents the highest productivity among currently described aerobic bacterial succinate producers. Optimization of the production conditions by decoupling succinate production from cell growth using the most advanced producer strain (C. glutamicumΔpqoΔpta‐ackAΔsdhCABΔcat/pAN6‐pyc^P458Sppc) led to an additional increase of the product yield to 0.45 mol succinate mol^?1 glucose and a titre of 10.6 g l^?1 (90 mM) succinate.     

A genetically engineered strain of Saccharopolyspora erythraea that produces 6,12-dideoxyerythromycin A as the major fermentation product

The erythromycin producer, Saccharopolyspora erythraea ER720, was genetically engineered to produce 6,12-dideoxyerythromycin A, a novel erythromycin derivative, as the major macrolide in the fermentation broth. Inspection of the biosynthetic pathway for erythromycin would suggest that production of this compound could be achieved simply through the disruption of two genes, that encoding the erythromycin C-6 hydroxylase (eryF ) and that encoding the erythromycin C-12 hydroxylase (eryK ). The double mutant, however, was found to produce a mixture of 6,12-dideoxyerythromycin A and the precursor, 6-deoxyerythromycin D. Complete conversion to the desired product (to the limit of detection by TLC) was achieved by inserting an additional copy of the eryG gene, encoding the erythromycin 3′′-O-methyltransferase and driven by the ermE* promoter, into the S. erythraea chromosome. Received: 6 October 1997 / Received revision: 27 January 1998 / Accepted: 24 February 1998     

Use chemometric techniques in the optimization of a specific bioassay for betalactams in milk

Aims: A microbiological bioassay using Geoacillus stearothermophilus was optimized to detect betalactams at concentrations near to the Maximum Residue Limits (MRLs), with low cross‐specificity for tetracycline. Methods and Results: A factorial design (3 × 4) was used to evaluate the effects of concentration of spores (2·0 × 10⁶, 4·0 × 10⁶ and 8·0 × 10⁶ spores ml^?1) and incubation time (3·0, 3·5, 4·0 and 4·5 h) on the response of the bioassay. Then, desirability function to raise the detection capabilities (CC_β) of tetracyclines and increase sensitivity to betalactams was implemented. Significant effects of Log[S] and incubation time [It] on the CC_β of betalactams and tetracyclines were observed. Finally, high value of global desirability (D = 0·853), adequate betalactams CC_β (3·8 μg l^?1 of penicillin ‘G’, 27 μg l^?1 of oxacillin, 8·1 μg l^?1 of ampicillin, 48 μg l^?1 of cloxacillin) and high tetracyclines CC_β (5260 μg l^?1 chlortetracycline, 1550 μg l^?1 of oxytetracycline, 1070 μg l^?1 of tetracycline) were calculated. Conclusions: The application of chemometric tools allows the optimization of a bioassay that detects betalactam residues in milk. The more robust conditions have been achieved in Log[S] = 6·30 and [It] = 4·20 h. Significance and Impact of the Study: The logistic regression model and the desirability function are adequate chemometric techniques to improve the properties of the methods, because it is possible to increase sensitivity and decrease cross‐specificity simultaneously.     

Statistical optimization of simple culture conditions to produce biomass of an ochratoxigenic mould biocontrol yeast strain

Aim: To maximize biomass production of an ochratoxigenic mould–controlling strain of Lachancea thermotolerans employing response surface methodology (RSM). Methods and Results: Using Plackett–Burman screening designs (PBSD) and central composite designs (CCD), an optimized culture medium containing (g l^?1): fermentable sugars (FS), 139·2, provided by sugar cane molasses (CMz), (NH₄)₂HPO₄ (DAP), 9·0, and yeast extract (YE), 2·5, was formulated. Maximal cell concentration obtained after 24 h at 28°C was 24·2 g l^?1cell dry weight (CDW). The mathematical model obtained was validated in experiments performed in shaken‐flask cultures and also in aerated bioreactors. Maximum yield and productivity values achieved were, respectively, of 0·23 g CDW/g FS in a medium containing (g l^?1): FS, 87·0; DAP, 7·0; YE, 1·0; and of 0·96 g CDW l^?1 h^?1 in a medium containing (g l^?1): FS, 150·8 plus DAP, 6·9. Conclusions: Optimized culture conditions for maximizing yeast biomass production determined in flask cultures were applicable at a larger scale. The highest yield values were attained in media containing relatively low‐CMz concentrations supplemented with DAP and YE. Yeast extract would not be necessary if higher productivity is the aim. Significance and Impact of the Study: Cells of L. thermotolerans produced aerobically could be sustainably produced in a medium just containing cheap carbon, nitrogen and phosphorus sources. Response surface methodology allowed the fine‐tuning of cultural conditions.     

Arthrospira platensis biomass with high protein content cultivated in continuous process using urea as nitrogen source

Aims: Arthrospira platensis has been studied for single‐cell protein production because of its biomass composition and its ability of growing in alternative media. This work evaluated the effects of different dilution rates (D) and urea concentrations (N₀) on A. platensis continuous culture, in terms of growth, kinetic parameters, biomass composition and nitrogen removal. Methods and results: Arthrospira platensis was continuously cultivated in a glass‐made vertical column photobioreactor agitated with Rushton turbines. There were used different dilution rates (0·04–0·44 day^?1) and urea concentrations (0·5 and 5 mmol l^?1). With N₀ = 5 mmol l^?1, the maximum steady‐state biomass concentration was1415 mg l^?1, achieved with D = 0·04 day^?1, but the highest protein content (71·9%) was obtained by applying D = 0·12 day^?1, attaining a protein productivity of 106·41 mg l^?1 day^?1. Nitrogen removal reached 99% on steady‐state conditions. Conclusions: The best results were achieved by applying N₀ = 5 mmol l^?1; however, urea led to inhibitory conditions at D ≥ 0·16 day^?1, inducing the system wash‐out. The agitation afforded satisfactory mixture and did not harm the trichomes structure. Significance and Impact of the Study: These results can enhance the basis for the continuous removal of nitrogenous wastewater pollutants using cyanobacteria, with an easily assembled photobioreactor.     

Evaluation of waste chicken feathers as peptone source for bacterial growth

Aims: Peptones are one of the most expensive constituents of microbial media. This study was undertaken to prepare the peptone from waste chicken feathers through a new process. Methods and Results: The chemical analysis of chicken feather peptone (CFP) was performed. The ability of CFP to support the growth of the three test bacteria in liquid and agar media was comparable to those of three commercial peptones [tryptone peptone (TP), fish peptone and protease peptone (PP)]. Conclusions: CFP was found to be rich in ash (42·1 g 100 g^?1), protein (55·8 g 100 g^?1) and mineral contents. The maximum biomass yield (3·13 g l^?1) and colony number (83 × 10⁸ CFU ml^?1) for bacterium Bacillus subtilis were attained with CFP. The maximum biomass yields and colony numbers for Lactobacillus delbrueckii ssp. bulgaricus and Escherichia coli were reached in TP medium. Second high biomass yield (2·64 g l^?1) and colony number (75 × 10⁸ CFU ml^?1) for E. coli were achieved using CFP. Third high biomass yield (1·29 g l^?1) and colony number (90 × 10⁷ CFU ml^?1) for Lact. delbrueckii ssp. bulgaricus were obtained in CFP medium. Significance and Impact of the Study: Usability of waste chicken feathers as substrate for bacteria was investigated for the first time in the present study. The peptone may be used in industrial fermentations for production of antibiotics, organic acids, enzymes and biopolymer. It may be also used in clinical microbiology. A new chemical process was developed for peptone preparation. This process may be also employed for peptone preparation from other organic materials, especially fibrose protein‐containing materials.     

Improved ethanol production of a newly isolated thermotolerant Saccharomyces cerevisiae strain after high-energy-pulse-electron beam

Aims: To isolate thermotolerant Saccharomyces cerevisiae with high‐energy‐pulse‐electron (HEPE) beam, to optimize the mutation strain fermentation conditions for ethanol production and to conduct a preliminary investigation into the thermotolerant mechanisms. Methods and Results: After HEPE beam radiation, the thermotolerant S. cerevisiae strain Y43 was obtained at 45°C. Moreover, the fermentation conditions of mutant Y43 were optimized by L3³ orthogonal experiment. The optimal glucose content and initial pH for fermentation were 20% g l^?1 and 4·5, respectively; peptone content was the most neglected important factor. Under this condition, ethanol production of Y43 was 83·1 g l^?1 after fermentation for 48 h at 43°C, and ethanol yield was 0·42 g g^?1, which was about 81·5% of the theoretical yield. The results also showed that the trehalose content and the expression of the genes MSN2, SSA3 and TPS1 in Y43 were higher than those in the original strain (YE0) under the same stress conditions. Conclusions: A genetically stable mutant strain with high ethanol yield under heat stress was obtained using HEPE. This mutant may be a suitable candidate for the industrial‐scale ethanol production. Significance and Impact of the Study: High‐energy‐pulse‐electron radiation is a new efficient technology in breeding micro‐organisms. The mutant obtained in this work has the advantages in industrial ethanol production under thermostress.     

Ethanol synthesis from glycerol by Escherichia coli redox mutants expressing adhE from Leuconostoc mesenteroides

Aims: Analysis of the physiology and metabolism of Escherichia coli arcA and creC mutants expressing a bifunctional alcohol‐acetaldehyde dehydrogenase from Leuconostoc mesenteroides growing on glycerol under oxygen‐restricted conditions. The effect of an ldhA mutation and different growth medium modifications was also assessed. Methods and Results: Expression of adhE in E. coli CT1061 [arcA creC(Con)] resulted in a 1·4‐fold enhancement in ethanol synthesis. Significant amounts of lactate were produced during micro‐oxic cultures and strain CT1061LE, in which fermentative lactate dehydrogenase was deleted, produced up to 6·5 ± 0·3 g l^?1 ethanol in 48 h. Escherichia coli CT1061LE derivatives resistant to >25 g l^?1 ethanol were obtained by metabolic evolution. Pyruvate and acetaldehyde addition significantly increased both biomass and ethanol concentrations, probably by overcoming acetyl‐coenzyme A (CoA) shortage. Yeast extract also promoted growth and ethanol synthesis, and this positive effect was mainly attributable to its vitamin content. Two‐stage bioreactor cultures were conducted in a minimal medium containing 100 μg l^?1 calcium d ‐pantothenate to evaluate oxic acetyl‐CoA synthesis followed by a switch into fermentative conditions. Ethanol reached 15·4 ± 0·9 g l^?1 with a volumetric productivity of 0·34 ± 0·02 g l^?1 h^?1. Conclusions: Escherichia coli responded to adhE over‐expression by funnelling carbon and reducing equivalents into a highly reduced metabolite, ethanol. Acetyl‐CoA played a key role in micro‐oxic ethanol synthesis and growth. Significance and Impact of the Study: Insight into the micro‐oxic metabolism of E. coli growing on glycerol is essential for the development of efficient industrial processes for reduced biochemicals production from this substrate, with special relevance to biofuels synthesis.     

Isolation and characterization of butachlor‐catabolizing bacterial strain Stenotrophomonas acidaminiphila JS‐1 from soil and assessment of its biodegradation potential

Aims: Isolation, characterization and assessment of butachlor‐degrading potential of bacterial strain JS‐1 in soil. Methods and Results: Butachlor‐degrading bacteria were isolated using enrichment culture technique. The morphological, biochemical and genetic characteristics based on 16S rDNA sequence homology and phylogenetic analysis confirmed the isolate as Stenotrophomonas acidaminiphila strain JS‐1. The strain JS‐1 exhibited substantial growth in M9 mineral salt medium supplemented with 3·2 mmol l^?1 butachlor, as a sole source of carbon and energy. The HPLC analysis revealed almost complete disappearance of butachlor within 20 days in soil at a rate constant of 0·17 day^?1 and half‐life (t_½) of 4·0 days, following the first‐order rate kinetics. The strain JS‐1 in stationary phase of culture also produced 21·0 μg ml^?1 of growth hormone indole acetic acid (IAA) in the presence of 500 μg ml^?1 of tryptophan. The IAA production was stimulated at lower concentrations of butachlor, whereas higher concentrations above 0·8 mmol l^?1 were found inhibitory. Conclusions: The isolate JS‐1 characterized as Stenotrophomonas acidaminiphila was capable of utilizing butachlor as sole source of carbon and energy. Besides being an efficient butachlor degrader, it substantially produces IAA. Significance and Impact of the Study: The bacterial strain JS‐1 has a potential for butachlor remediation with a distinctive auxiliary attribute of plant growth stimulation.     

Enhancement of docosahexaenoic acid production by Schizochytrium sp. using a two-stage oxygen supply control strategy based on oxygen transfer coefficient

Aims: To improve the yield and productivity of docosahexaenoic acid (DHA) by Schizochytrium sp. in terms of the analysis of microbial physiology. Methods and Results: A two‐stage oxygen supply control strategy, aimed at achieving high concentration and high productivity of DHA, was proposed. At the first 40 h, K_La was controlled at 150·1 h^?1 to obtain high μ for cell growth, subsequently K_La was controlled at 88·5 h^?1 to maintain high q_p for high DHA accumulation. Finally, the maximum lipid, DHA content and DHA productivity reached 46·6, 17·7 g l^?1 and 111 mg l^?1 h^?1, which were 43·83%, 63·88% and 32·14% over the best results controlled by constant K_La. Conclusions: This paper described a two‐stage oxygen supply control strategy based on the kinetic analysis for efficient DHA fermentation by Schizochytrium sp. Significance and Impact of the study: This study showed the advantage of two‐stage control strategy in terms of microbial physiology. As K_La is a scaling‐up parameter, the idea developed in this paper could be scaled‐up to industrial process and applied to other industrial biotechnological processes to achieve both high product concentration and high productivity.     

Effects of pretreated beet molasses on benzaldehyde lyase production by recombinant Escherichia coli BL21(DE3)pLySs

Aims: To investigate the effects of pretreated‐beet molasses on Escherichia coli fermentation using benzaldehyde lyase (BAL) production by recombinant E. coli BL21(DE3)pLySs process as the model system. Methods and Results: The effect of the initial pretreated (hydrolysed) beet molasses concentration was investigated at 16, 24, 30 and 56 g l^?1 at a dissolved oxygen condition of 40% air saturation cascade to airflow, at N = 625 min^?1 and pH_C = 7·2 controlled‐pH operation conditions. The highest cell concentration and BAL activity were obtained as C_X = 5·3 g l^?1 and A = 1617 U cm^?3, respectively, in the medium containing 30 g l^?1 pretreated beet molasses consisting of 7·5 g l^?1 glucose and 7·5 g l^?1 fructose. Production with and without IPTG (isopropyl‐β‐d ‐thiogalactopyranoside) induction using the medium containing 30 g l^?1 of pretreated beet molasses yielded the same amount of BAL production, where the overall cell yield on the substrate was 0·37 g g^?1, and the highest oxygen transfer coefficient was K_La = 0·048 s^?1. Conclusions: Pretreated beet molasses was used in the fermentation with E. coli for the first time and it yielded higher cell and BAL production compared with the glucose‐based medium. Significance and Impact of the Study: Pretreated beet molasses was found to be a good carbon source for E. coli fermentation. Furthermore, IPTG addition was not required to induce recombinant protein production as galactose, one of the monomers of trisaccharide raffinose present in the beet molasses (1·2%), induced the lac promoter.     

Production of single cell protein using waste capsicum powder produced during capsanthin extraction

Aims: To produce single cell protein (SCP) by using waste capsicum powder produced during capsanthin extraction as a substrate. Methods and results: The extraction [CPM (capsicum powder medium)] from waste capsicum powder was used as culture medium to cultivate four yeast strains. The main composition of CPM was determined. The average concentration of total sugar, total nitrogen and phosphorous of CPM were 16·3, 3·7 g l^?1 and 785·4 mg l^?1, respectively. Four yeast strains were cultured in two CPMs, and the cell mass, protein content of cells and specific growth rate of cells were determined. Addition of corn steep liquor significantly increased the cell mass production. Presence of capsaicin in CPM did not show inhibition of cell growth of yeast tested. Conclusions: CPM contained sufficient nutrients and could be used as a good medium to produce SCP. Candida utilis 1769 was chosen as the biomass producer because of its highest SCP formation (6·8 g l^?1) and higher specific growth rate (0·12 h^?1). The amino acid composition of its protein was well balanced. Significance and Impact of the Study: Utilization of waste capsicum powder can reduce environmental pollution and increase protein supply for animal feed.     

Optimization of exopolysaccharide production from Armillaria mellea in submerged cultures

Aims: To study the optimization of submerged culture conditions for exopolysaccharide (EPS) production by Armillaria mellea in shake‐flask cultures and also to evaluate the performance of an optimized culture medium in a 5‐l stirred tank fermenter. Methods and Results: Shake flask cultures for EPS optimal nutritional production contained having the following composition (in g l^?1): glucose 40, yeast extract 3, KH₂PO₄ 4 and MgSO₄ 2 at an optimal temperature of 22°C and an initial of pH 4·0. The optimal culture medium was then cultivated in a 5‐l stirred tank fermenter at 1 vvm (volume of aeration per volume of bioreactor per min) aeration rate, 150 rev min^?1 agitation speed, controlled pH 4·0 and 22°C. In the optimal culture medium, the maximum EPS production in a 5‐l stirred tank fermenter was 588 mg l^?1, c. twice as great as that in the basal medium. The maximum productivity for EPS (Q_p) and product yield (Y_P/S) were 42·02 mg l^?1 d^?1 and 26·89 mg g^?1, respectively. Conclusions: The optimal culture conditions we proposed in this study enhanced the EPS production of A. mellea from submerged cultures. Significance and Impact of the Study: The optimal culturing conditions we have found will be a suitable starting point for a scale‐up of the fermentation process, helping to develop the production of related medicines and health foods from A. mellea.     

Chitosan production from hemicellulose hydrolysate of corn straw: impact of degradation products on Rhizopus oryzae growth and chitosan fermentation

Aims: To examine the potential use of hemicellulose hydrolysate (HH) for the production of chitosan by Rhizopus oryzae and investigate the influence of contents in HH on mycelia growth and chitosan synthesis. Methods and Results: Compared to xylose medium, HH enhanced mycelia growth, chitosan content and production of R. oryzae by 10·2, 64·5 and 82·1%, respectively. During sulfuric acid hydrolysis of corn straw, sugars (glucose, galactose, etc) and inhibitors (formic acid, acetic acid and furfural) were generated. Acetic acid (2·14 g l^?1) and formic acid (0·83 g l^?1) were stimulative, while furfural (0·55 g l^?1) was inhibitory. Inhibitors, at different concentrations, increased the mycelia growth and chitosan production by 24·5–37·8 and 60·1–207·1%. Conclusions: HH of corn straw is a good source for chitosan production. Inhibitors in HH, at proper concentrations, can enhance chitosan production greatly. Significance and Impact of the Study: This work for the first time reported chitosan production from HH. Chitosan production can be greatly enhanced by cheap chemicals such as inhibitors in HH.     

Improved production of erythromycin by Saccharopolyspora erythraea by various plant oils

Various plant oils (50 g l^–1) increased the production of erythromycin by Saccharopolyspora erythraea. Maximum titer of erythromycin in media containing black cherry kernel, walnut, rapeseed, olive and cottonseed oils and control medium were 3.5, 2.8, 2.6, 2.1, 1.9, 0.7 g l^–1, respectively. Erythromycin production media containing rapeseed or cottonseed oil was growth-dependent but not in other media used.     

Competitive exclusion as a mode of action of a novel Bacillus cereus aquaculture biological agent

Aims: To determine the contribution of potential modes of action of a Bacillus cereus aquaculture biological control agent in inhibition of the fish pathogen, Aeromonas hydrophila. Methods and Results: When B. cereus was tested in plate well inhibition studies, no production of antimicrobial compounds was detected. Bacillus cereus had a high growth rate (0·96 h^?1), whereas Aer. hydrophila concentration decreased by c. 70% in co‐culture experiments. In nutrient limitation studies, B. cereus had a significantly higher growth rate when cultured under glucose (P < 0·05) and iron (P < 0·01) limitation in comparison with Aer. hydrophila. Bacillus cereus glucose (0·30 g l^?1 h^?1) and iron (0·60 mg l^?1 h^?1) uptake rates were also significantly higher (P < 0·01) than the Aer. hydrophila glucose (0·14 g l^?1 h^?1) and iron (0·43 mg l^?1 h^?1) uptake rates. Iron uptake was facilitated by siderophore production shown in time profile studies where relative siderophore production was c. 60% through the late exponential and sporulation phases. Conclusions: Competitive exclusion by higher growth rate, competition for organic carbon and iron, facilitated by siderophore production, could be identified as mechanisms of pathogen growth inhibition by B. cereus. Significance and Impact of the Study: This study is the first elucidation of the mechanism of action of our novel B. cereus biological agent in growth attenuation of pathogenic Aer. hydrophila. This study enhances the application knowledge and attractiveness for adoption of B. cereus NRRL 100132 for exploitation in aquaculture.     

Modelling the growth and ethanol production of Brettanomyces bruxellensis at different glucose concentrations

Aim: To study the effect of glucose concentrations on the growth by Brettanomyces bruxellensis yeast strain in batch experiments and develop a mathematical model for kinetic behaviour analysis of yeast growing in batch culture. Methods and Results: A Matlab algorithm was developed for the estimation of model parameters. Glucose fermentation by B. bruxellensis was studied by varying its concentration (5, 9·3, 13·8, 16·5, 17·6 and 21·4%). The increase in substrate concentration up to a certain limit was accompanied by an increase in ethanol and biomass production; at a substrate concentration of 50–138 g l^?1, the ethanol and biomass production were 24, 59 and 6·3, 11·4 g l^?1, respectively. However, an increase in glucose concentration to 165 g l^?1 led to a drastic decrease in product formation and substrate utilization. Conclusions: The model successfully simulated the batch kinetic observed in all cases. The confidence intervals were also estimated at each phase at a 0·95 probability level in a t‐Student distribution for f degrees of freedom. The maximum ethanol and biomass yields were obtained with an initial glucose concentration of 138 g l^?1. Significance and Impact of the Study: These experiments illustrate the importance of using a mathematical model applied to kinetic behaviour on glucose concentration by B. bruxellensis.