'O-Acyl isopeptide method' for peptide synthesis: Solvent effects in the synthesis of Abeta1-42 isopeptide using 'O-acyl isodipeptide unit'.

'O-Acyl isopeptide method' is an efficient synthetic method for peptides. We designed 'O-acyl isodipeptide units', Boc-Ser/Thr(Fmoc-Xaa)-OH, as important building blocks to enable routine use of the O-acyl isopeptide method. In the synthesis of an Abeta1-42 isopeptide using O-acyl isodipeptide unit Boc-Ser(Fmoc-Gly)-OH, a side reaction, resulting in the deletion of Ser(26) in the O-acyl isopeptide structure, was noticed during coupling of the unit. We observed that the side reaction occurred during the activation step and was solvent-dependent. In DMF or NMP, an intramolecular side reaction, originating from the activated species of the unit, occurred during the activation step. In non-polar solvents such as CHCl(3) or CH(2)Cl(2), the side reaction was less likely to occur. Using CH(2)Cl(2) as solvent in coupling the unit, the target Abeta1-42 isopeptide was synthesized with almost no major side reaction.     

The 'O-acyl isopeptide method' for the synthesis of difficult sequence-containing peptides: application to the synthesis of Alzheimer's disease-related amyloid beta peptide (Abeta) 1-42.

An efficient 'O-acyl isopeptide method' for the synthesis of difficult sequence-containing peptides was applied successfully to the synthesis of amyloid beta peptide (Abeta) 1-42 via a water-soluble O-acyl isopeptide of Abeta1-42, i.e. '26-O-acyl isoAbeta1-42' (6). This paper describes the detailed synthesis of Abeta1-42 focusing on the importance of resin selection and the analysis of side reactions in the O-acyl isopeptide method. Protected '26-O-acyl isoAbeta1-42' peptide resin was synthesized using 2-chlorotrityl chloride resin with minimum side reactions in comparison with other resins and deprotected crude 26-O-acyl isoAbeta1-42 was easily purified by HPLC due to its relatively good purity and narrow elution with reasonable water solubility. This suggests that only one insertion of the isopeptide structure into the sequence of the 42-residue peptide can suppress the unfavourable nature of its difficult sequence. The migration of O-acyl isopeptide to intact Abeta1-42 under physiological conditions (pH 7.4) via O--N intramolecular acyl migration reaction was very rapid and no other by-product formation was observed while 6 was stable under storage conditions. These results concluded that our strategy not only overcomes the solubility problem in the synthesis of Abeta1-42 and can provide intact Abeta1-42 efficiently, but is also applicable in the synthesis of large difficult sequence-containing peptides at least up to 50 amino acids. This synthesis method would provide a biological evaluation system in Alzheimer's disease research, in which 26-O-acyl isoAbeta1-42 can be stored in a solubilized form before use and then rapidly produces intact Abeta1-42 in situ during biological experiments.     

Expeditious chemical synthesis of ubiquitinated peptides employing orthogonal protection and native chemical ligation

Ubiquitination-the attachment of ubiquitin to a protein target-is involved in a wide range of cellular processes in eukaryotes. This dynamic posttranslational modification utilizes three enzymes to link, through an isopeptide bond, the C-terminal Gly of ubiquitin to the lysine side chain from a protein target. Progress in the field aiming at deciphering the role of ubiquitination in biological processes has been very dependent on the discovery of the enzymatic machinery, which is known to be very specific to each protein target. Chemical approaches offer a complementary route to the biochemical methods to construct these conjugates in vitro in order to assist in unraveling the role of ubiquitination on protein function. Herein is presented a novel method for the rapid synthesis of ubiquitinated peptides employing solid-phase peptide to generate the critical isopeptide linkage. Using these tools, several ubiquitinated peptides derived from known ubiquitinated proteins were prepared. Among them is the ubiquitinated C-terminal fragment of H2B, which can be used in the synthesis of monoubiquitinated H2B. For the first time, we systematically assessed the effect of the length of the ubiquitinated peptides on the UCH-L3 activity and found that peptides of up to ～20 residues are preferred substrates.     

Development of O-acyl isopeptide method

During over a decade of study on aspartic protease inhibitors and water-soluble prodrugs, in 2003, we discovered that the presence of an O-acyl instead of N-acyl residue within the peptide backbone significantly changed the secondary structure of the native peptide. In addition, the target peptide was subsequently generated by an O-N intramolecular acyl migration reaction. These findings led to the development of a novel method, called "O-acyl isopeptide method," for the synthesis of peptides containing difficult sequence. Further application of the method to Alzheimer's Abeta1-42 revealed that the O-acyl isopeptide of Abeta1-42 could be effectively synthesized and stored without spontaneous self-assembly. Intact monomer Abeta1-42 could then be obtained from the isopeptide under physiological experimental conditions. We named the O-acyl isopeptide as "Click Peptide," because of its "quick and easy one-way conversion" to the parent Abeta1- 42. Application of the click peptide has provided a new basis for the investigation of the biological functions of Abeta1-42 by inducible activation of its self-assembly. The O-acyl isopeptide method has further evolved as a general method for peptides synthesis with our recent developments of "O-acyl isodipeptide units" and "racemization-free segment condensation methodology." Isodipeptide units have enabled routine use of the O-acyl isopeptide method by avoiding the often difficult esterification reaction on resin. "Racemizationfree segment condensation methodology" has been achieved by employing N-segments possessing a C-terminal urethaneprotected O-acyl Ser/Thr residues. The synthesis of long peptides/proteins by racemization-free segment condensation has thus become possible at Ser/Thr residues instead of Cterminal Gly/Pro residues. As the O-acyl isopeptide method becomes more widely utilized, we have composed this review to facilitate its application for the production of peptides and proteins.     

Isopeptide method: development of S‐acyl isopeptide method for the synthesis of difficult sequence‐containing peptides

A novel strategy for a more efficient synthesis of difficult sequence‐containing peptides, the S‐acyl isopeptide method, was developed and successfully applied. A model pentapeptide Ac–Val–Val–Cys–Val–Val–NH₂ was synthesized via its water‐soluble S‐acyl isopeptide using an S‐acyl isodipeptide unit, Boc–Cys(Fmoc–Val)–OH. An S‐acyl isopeptide possessing excellent water solubility could be readily and quantitatively converted to the native peptide via an S N intramolecular acyl migration reaction at pH 7.4. Thus, the S‐acyl isopeptide method provides a useful tool in peptide chemistry. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of oligopeptides through O-acyl isopeptide method

The O-acyl isopeptide method has recently gained attention as an efficient protocol for the synthesis of 'difficult sequence' peptides. Herein, synthesis of three oligopeptides of different length, a pentapeptide Gly-Leu-Leu-Ser-Val, a heptapeptide fragment 285-291 of transmembrane (M7-24-T40) Ala-Val-Leu-Ser-Leu-Pro-Leu and a decapeptide, Gly-Leu-Leu-Ser-Val-Leu-Gly-Ser-Val-Ala were demonstrated in solution phase by employing O-acyl isopeptide method. The peptides were established through an efficient pH triggered intramolecular O→N acyl migration under physiological conditions. The reactions were clean and complete in appreciable length of time.     

Epimerization‐free synthesis of cyclic peptide by use of the O‐acyl isopeptide method

A head‐to‐tail cyclization of a protected linear hexapeptide with a C‐terminal O‐acyl isopeptide proceeded to give a cyclic O‐acyl isopeptide without epimerization. The cyclic O‐acyl isopeptide possessed different secondary structures compared with the native cyclic peptide. The isopeptide was then efficiently converted to the desired cyclic peptide via an O‐to‐N acyl migration reaction using a silica gel‐anchored base. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Multiple peptide synthesis

The synthesis of large numbers of peptides can be very labor intensive and, if a conventional peptide synthesizer is used, only small numbers of peptides can be produced within a reasonable time. The techniques described below can make large numbers of different peptides simultaneously with varying degrees of mechanization, ranging from the wholly manual methods, to those involving complete mechanization of the whole synthesis process. Most of the multiple synthesis methods are primarily intended for small scale production ranging from microgram amounts up to a few tens of milligrams. All of the systems are economical in use of solvents and reagents, enabling cost-effective synthesis. The techniques described can also be used to prepare peptide libraries, containing several millions of peptide sequences, to enable the rapid screening of all possible permutations of amino acids within short peptides. However, it is considered that multiple synthesis methods are not particularly suited where extreme high purity or very long peptides are required.     

Chemical synthesis of the ubiquitinated form of histone H3 and its effect on DNA methyltransferase 1

Posttranslational modifications of histone proteins, which form nucleosome cores, play an important role in gene regulation. Ubiquitination is one such modification. We previously reported on the synthesis of ubiquitinated histone H3 with an isopeptide mimetic structure. In this report, we describe the preparation of ubiquitinated histone H3 peptides with a native isopeptide structure, which showed a slightly weaker effect on the enzymatic activity of DNA methyltransferase 1 than the previous ubiquitinated H3 peptide analogs. These findings show that a native structure is important for determining the mechanism of the function, although ubiquitinated H3 peptide analogs can mimic the role of the original ubiquitinated H3. We also report on the successful preparation of the ubiquitinated full length histone H3.     

Microwave-assisted Boc-solid phase peptide synthesis of cyclic cysteine-rich peptides.

In this study we describe the first protocols for the synthesis of cystine-rich peptides in the presence of microwave radiation with Boc-solid phase peptide synthesis (SPPS). This method is exemplified for macrocyclic peptides known as cyclotides, which comprise approximately 30 amino acids and incorporate a cystine knot arrangement of their three disulfide bonds. However, the method is broadly applicable for a wide range of peptides using Boc-SPPS, especially for SPPS of large peptides via native chemical ligation. Microwave radiation produces peptides in high yield and with high purity, and we were able to reduce the time for the assembly of approximately 30 mer peptide chains to an overnight reaction in the automated microwave-assisted synthesis.     

Synthesis of peptide analogues using the multipin peptide synthesis method

Modification of the multipin peptide synthesis method which allows the simultaneous synthesis of large numbers of different peptide analogues is described. Peptides were assembled on polyethylene pins derivatized with a 4-(beta-alanyloxymethyl)benzoate (beta-Ala-HMB) handle. For comparative purposes, peptides were also assembled on the diketopiperazine-forming handle N epsilon-(beta-alanyl)lysylprolyloxylactate. In model studies it was demonstrated that beta-Ala-HMB-linked peptides were cleaved from polyethylene pins with dilute sodium hydroxide or 4% methylamine/water to yield analogues with beta-Ala-free acid (beta-Ala-CO2H) and beta-Ala-methylamide (beta-Ala-CONHCH3), respectively. To assess the suitability of this approach for T-cell determinant analysis, analogues of a known T-cell determinant were synthesized with the various C-terminal endings. Peptides were characterized by amino acid analysis and fast atom bombardment-mass spectrometry. HPLC of the crude cleaved peptides indicated that 22 of the 24 peptides were greater than 95% pure. These crude peptide solutions were nontoxic in sensitive cell culture assays without further purification. All three cleavage procedures gave comparable activities in T-cell proliferation assays. These results demonstrate the potential of the multipin peptide synthesis method for the production of large numbers of different peptide analogues.     

Screening for transglutaminase-catalyzed modifications by peptide mass finger printing using multipoint recalibration on recognized peaks for high mass accuracy.

Detection of posttranslational modifications is expected to be one of the major future experimental challenges for proteomics. We describe herein a mass spectrometric procedure to screen for protein modifications by peptide mass fingerprinting that is based on post-data acquisition improvement of the mass accuracy by exporting the peptide mass values into analytical software for multipoint recalibration on recognized peaks. Subsequently, the calibrated peak mass data set is used in searching for modified peptides, i.e., peptides possessing specific mass deviations. In order to identify the location of Lys- and Gln-residues available for transglutaminase-catalyzed isopeptide bond formation, mammalian small heat shock proteins (sHsps) were screened for labeling with the two hexapeptide probes GQDPVR and GNDPVK in presence of transglutaminase. Peptide modification due to cross-linking of the GQDPVR hexa-peptide probe was detected for C-terminal Lys residues. Novel transglutaminase-susceptible Gln sites were identified in two sHsps (Q31/Q27 in Hsp20 and HspB2, respectively), by cross-linking of the GNDPVK hexapeptide probe. Deamidation of specific Gln residues was also detected, as well an isopeptide derived from intramolecular Gln-Lys isopeptide bond formation. We conclude that peptide mass fingerprinting can be an efficient way of screening for various posttranslational modifications. Basically any instrumentation for MALDI mass spectrometry can be used, provided that post-data acquisition recalibration is applied.     

Molecular characterization of covalent complexes between tissue transglutaminase and gliadin peptides

Tissue transglutaminase (TG2) modifies proteins and peptides by transamidation or deamidation of specific glutamine residues. TG2 also has a central role in the pathogenesis of celiac disease. The enzyme is both the target of disease-specific autoantibodies and generates deamidated gliadin peptides recognized by intestinal T cells from patients. Incubation of TG2 with gliadin peptides also results in the formation of covalent TG2-peptide complexes. Here we report the characterization of complexes between TG2 and two immunodominant gliadin peptides. Two types of covalent complexes were found; the peptides are either linked via a thioester bond to the active site cysteine of TG2 or via isopeptide bonds to particular lysine residues of the enzyme. We quantified the number of gliadin peptides bound to TG2 under different conditions. After 30 min of incubation of TG2 at 1 microm with an equimolar ratio of peptides to TG2, approximately equal amounts of peptides were bound by thioester and isopeptide linkage. At higher peptide to TG2 ratios, more than one peptide was linked to TG2, and isopeptide bond formation dominated. The lysine residues in TG2 that act as acyl acceptors were identified by matrix assisted laser desorption ionization and nanoelectrospray mass spectrometry and tandem mass spectrometry analysis of proteolytic digests of the TG2-peptide complexes. At a high molar excess of gliadin peptides to TG2 altogether six lysine residues of TG2 were found to participate in isopeptide bond formation. The results are relevant to the understanding of how antibodies to TG2 are formed in celiac disease.     

Individually addressable parallel peptide synthesis on microchips

Miniaturized, spatially addressable microchips of peptides and peptidomimetics are powerful tools for high-throughput biomedical and pharmaceutical research and the advancement of proteomics. Here we report an efficient and flexible method for the parallel synthesis of peptides on individually addressable microchips, using digital photolithography and photogenerated acid in the deprotection step. We demonstrate that we are able to synthesize thousands of peptides in a 1 cm(2) area on a microchip using 20 natural amino acids as well as synthetic amino acid analogs, with high stepwise yields and short reaction-cycle times. Epitope screening experiments using a p53 antibody (PAb240) produced clearly defined binding patterns. The peptidomimetic sequences on the microchip show specific antibody binding and provide insights into the molecular details responsible for specificity of epitope binding. Our approach requires just a conventional synthesizer and a computer-controllable optical module, thereby allowing potential development of peptide microchips for various pharmaceutical and proteomic applications in routine research laboratories.     

Developments in peptide and amide synthesis

The solid-phase methodology is key for an effective synthesis of peptides, from a milligram scale for research to a multi-kilo scale for drug production. Indeed, small peptides containing up to 20-30 amino acids are most readily synthesized by a solid-phase strategy. Larger peptides (up to 60 amino acids) should be synthesized by a convergent approach (i.e. synthesis of protected constituent peptides in solid-phase and combination of these units in solution). Larger peptides and proteins are prepared by chemical ligation, where unprotected segments have been prepared in solid-phase.     

Protease-catalysed peptide synthesis in solvent-free system

Summary A new method of enzymatic peptide synthesis without any liquid added has been proposed. The method is based on the admixing of N-acylamino acid (peptide) esters and nucleophiles (amides or tert.-butylesters of amino acids or peptides, peptides) with various proteolytic enzymes such as α-chymotrypsin, trypsin, proteinase K, subtilisin, elastase and papain in the presence of Na₂CO₃. 10H₂O. In most instances, acylating components were completely converted within a few hours giving satisfactory yields of desired peptide products.     

Tryptathionine bridges in peptide synthesis

The tryptathionine linkage is a crosslink formed between tryptophan and cysteine. This feature is characteristic of the bicyclic peptides: the phallotoxins and the amatoxins. These peptides both bind to protein folds of their respective targets (F-actin and RNA pol II, respectively) with extremely high affinities. Studies on these peptides have shown that the tryptathionine crosslink is essential for this binding affinity. Tryptathionines have been investigated for many years and several syntheses exist for their formation. In this review, we report on the various methodologies employed in tryptathionine synthesis, and discuss some of the advantages and disadvantages associated with each of them.     

Matrix‐assisted peptide synthesis on nanoparticles

We report a new method for multistep peptide synthesis on polymeric nanoparticles of differing sizes. Polymeric nanoparticles were functionalized via their temporary embedment into a magnetic inorganic matrix that allows multistep peptide synthesis. The matrix is removed at the end of the process for obtaining nanoparticles functionalized with peptides. The matrix‐assisted synthesis on nanoparticles was proved by generating various biologically relevant peptides. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Synthetic peptide substrates for the erythrocyte protein carboxyl methyltransferase. Detection of a new site of methylation at isomerized L-aspartyl residues

Four hexapeptides of sequence L-Val-L-Tyr-L-Pro-(Asp)-Gly-L-Ala containing D- or L-aspartyl residues in normal or isopeptide linkages have been synthesized by the Merrifield solid-phase method as potential substrates of the erythrocyte protein carboxyl methyltransferase. This enzyme has been shown to catalyze the methylation of D-aspartyl residues in proteins in red blood cell membranes and cytosol. Using a new vapor-phase methanol diffusion assay, we have found that the normal hexapeptides containing either D- or L-aspartyl residues were not substrates for the human erythrocyte methyltransferase. On the other hand, the L-aspartyl isopeptide, in which the glycyl residue was linked in a peptide bond to the beta-carboxyl group of the aspartyl residue, was a substrate for the enzyme with a Km of 6.3 microM and was methylated with a maximal velocity equal to that observed when ovalbumin was used as a methyl acceptor. The enzyme catalyzed the transfer of up to 0.8 mol of methyl groups/mol of this peptide. Of the four synthetic peptides, only the L-isohexapeptide competitively inhibits the methylation of ovalbumin by the erythrocyte enzyme. This peptide also acts as a substrate for both of the purified protein carboxyl methyltransferases I and II which have been previously isolated from bovine brain (Aswad, D. W., and Deight, E. A. (1983) J. Neurochem. 40, 1718-1726). The L-isoaspartyl hexapeptide represents the first defined synthetic substrate for a eucaryotic protein carboxyl methyltransferase. These results demonstrate that these enzymes can not only catalyze the formation of methyl esters at the beta-carboxyl groups of D-aspartyl residues but can also form esters at the alpha-carboxyl groups of isomerized L-aspartyl residues. The implications of these findings for the metabolism of modified proteins are discussed.     

Multiple peptide synthesis using a single support (MPS3)

An automated multiple peptide synthesis method to synthesize, cleave, and purify several peptides simultaneously in a single batch has been developed. The technique is based on the synthesis of multiple peptides on a single solid phase support and is easily adapted to manual or to automated methods. The approach relies on coupling of amino acid mixtures to the resin and it has been found that DCC/HOBt gives the best coupling performance. Fast Atom Bombardment Mass Spectrometry (FAB-MS) was used to rapidly and efficiently identify the peptides in each synthetic mixture which significantly assisted the purification process by HPLC. The method has been successfully applied to the synthesis of magainin 2 and angiotensinogen peptides.