Crystal structure of Thermoactinomyces vulgaris R-47 alpha-amylase II (TVAII) hydrolyzing cyclodextrins and pullulan at 2.6 A resolution

The crystal structure of Thermoactinomyces vulgaris R-47 alpha-Amylase II (TVAII) has been determined by multiple isomorphous replacement at 2.6 A resolution. TVAII was crystallized in an orthorhombic system with the space group P212121 and the cell dimensions a=118.5 A, b=119.5 A, c=114.5 A. There are two molecules in an asymmetric unit, related by the non-crystallographic 2-fold symmetry. Diffraction data were collected at 113 K and the cell dimensions reduced to a=114.6 A, b=117.9 A, c=114.2 A, and the model was refined against 7.0-2.6 A resolution data giving an R-factor of 0.204 (Rfree=0.272). The final model consists of 1170 amino acid residues (two molecules) and 478 water molecules with good chemical geometry. TVAII has three domains, A, B, and C, like other alpha-amylases. Domain A with a (beta/alpha)8 barrel structure and domain C with a beta-sandwich structure are very similar to those found in other alpha-amylases. Additionally, TVAII has an extra domain N composed of 121 amino acid residues at the N-terminal site, which has a beta-barrel-like structure consisting of seven antiparallel beta-strands. Domain N is one of the driving forces in the formation of the dimer structure of TVAII, but its role in the enzyme activity is still not clear. TVAII does not have the Ca2+ binding site that connects domains A and B in other alpha-amylases, rather the NZ atom of Lys299 of TVAII serves as the connector between these domains. TVAII can hydrolyze cyclodextrins and pullulan as well as starch. Based on a structural comparison with the complex between a mutant cyclodextrin glucanotransferase and a beta-cyclodextrin derivative, Phe286 located at domain B is considered the residue most likely to recognize the hydrophobic cavity of cyclodextrins. The active-site cleft of TVAII is wider and shallower than that of other alpha-amylases, and seems to be suitable for the binding of pullulan which is expected not to adopt the helical structure of amylose.     

Role of Phe286 in the recognition mechanism of cyclomaltooligosaccharides (cyclodextrins) by Thermoactinomyces vulgaris R-47 alpha-amylase 2 (TVAII). X-ray structures of the mutant TVAIIs, F286A and F286Y, and kinetic analyses of the Phe286-replaced mutant TVAIIs

Phe286 located in the center of the active site of alpha-amylase 2 from Thermoactinomyces vulgaris R-47 (TVAII) plays an important role in the substrate recognition for cyclomaltooligosaccharides (cyclodextrins). The X-ray structures of mutant TVAIIs with the replacement of Phe286 by Ala (F286A) and Tyr (F286Y) were determined at 3.2 A resolution. Their structures have no significant differences from that of the wild-type enzyme. The kinetic analyses of Phe286-replaced variants showed that the variants with non-aromatic residues, Ala (F286A) and Leu (F286L), have lower enzymatic activities than those with aromatic residues, Tyr (F286Y) and Trp (F286W), and the replacement of Phe286 affects enzymatic activities for CDs more than those for starch.     

Structure of a complex of Thermoactinomyces vulgaris R-47 alpha-amylase 2 with maltohexaose demonstrates the important role of aromatic residues at the reducing end of the substrate binding cleft

Thermoactinomyces vulgaris R-47 alpha-amylase 2 (TVAII) can efficiently hydrolyze both starch and cyclomaltooligosaccharides (cyclodextrins). The crystal structure of an inactive mutant TVAII in a complex with maltohexaose was determined at a resolution of 2.1A. TVAII adopts a dimeric structure to form two catalytic sites, where substrates are found to bind. At the catalytic site, there are many hydrogen bonds between the enzyme and substrate at the non-reducing end from the hydrolyzing site, but few hydrogen bonds at the reducing end, where two aromatic residues, Trp356 and Tyr45, make effective interactions with a substrate. Trp356 drastically changes its side-chain conformation to achieve a strong stacking interaction with the substrate, and Tyr45 from another molecule forms a water-mediated hydrogen bond with the substrate. Kinetic analysis of the wild-type and mutant enzymes in which Trp356 and/or Tyr45 were replaced with Ala suggested that Trp356 and Tyr45 are essential to the catalytic reaction of the enzyme, and that the formation of a dimeric structure is indispensable for TVAII to hydrolyze both starch and cyclodextrins.     

Complex structures of Thermoactinomyces vulgaris R-47 alpha-amylase 2 with acarbose and cyclodextrins demonstrate the multiple substrate recognition mechanism

Thermoactinomyces vulgaris R-47 alpha-amylase 2 (TVAII) has the unique ability to hydrolyze cyclodextrins (CDs), with various sized cavities, as well as starch. To understand the relationship between structure and substrate specificity, x-ray structures of a TVAII-acarbose complex and inactive mutant TVAII (D325N/D421N)/alpha-, beta- and gamma-CDs complexes were determined at resolutions of 2.9, 2.9, 2.8, and 3.1 A, respectively. In all complexes, the interactions between ligands and enzymes at subsites -1, -2, and -3 were almost the same, but striking differences in the catalytic site structure were found at subsites +1 and +2, where Trp(356) and Tyr(374) changed the conformation of the side chain depending on the structure and size of the ligands. Trp(356) and Tyr(374) are thought to be responsible for the multiple substrate-recognition mechanism of TVAII, providing the unique substrate specificity. In the beta-CD complex, the beta-CD maintains a regular conical structure, making it difficult for Glu(354) to protonate the O-4 atom at the hydrolyzing site as a previously proposed hydrolyzing mechanism of alpha-amylase. From the x-ray structures, it is suggested that the protonation of the O-4 atom is possibly carried out via a hydrogen atom of the inter-glucose hydrogen bond at the hydrolyzing site.     

Crystal structures and structural comparison of Thermoactinomyces vulgaris R-47 alpha-amylase 1 (TVAI) at 1.6 A resolution and alpha-amylase 2 (TVAII) at 2.3 A resolution

The X-ray crystal structures of Thermoactinomyces vulgaris R-47 alpha-amylase 1 (TVAI) and alpha-amylase 2 (TVAII) have been determined at 1.6 A and 2.3 A resolution, respectively. The structures of TVAI and TVAII have been refined, R-factor of 0.182 (R(free)=0.206) and 0.179 (0.224), respectively, with good chemical geometries. Both TVAI and TVAII have four domains, N, A, B and C, and all very similar in structure. However, there are some differences in the structures between them. Domain N of TVAI interacts strongly with domains A and B, giving a spherical shape structure to the enzyme, while domain N of TVAII is isolated from the other domains, which leads to the formation of a dimer. TVAI has three bound Ca ions, whereas TVAII has only one. TVAI has eight extra loops compared to TVAII, while TVAII has two extra loops compared to TVAI. TVAI can hydrolyze substrates more efficiently than TVAII with a high molecular mass such as starch, while TVAII is much more active against cyclodextrins than TVAI and other alpha-amylases. A structural comparison of the active sites has clearly revealed this difference in substrate specificity.     

Mutual conversion of substrate specificities of Thermoactinomyces vulgaris R-47 alpha-amylases TVAI and TVAII by site-directed mutagenesis

Thermoactinomyces vulgaris R-47 produces two alpha-amylases, TVAI and TVAII, differing in substrate specificity from each other. TVAI favors high-molecular-weight substrates like starch, and scarcely hydrolyzes cyclomaltooligosaccharides (cyclodextrins) with a small cavity. TVAII favors low-molecular-weight substrates like oligosaccharides, and can efficiently hydrolyze cyclodextrins with various sized cavities. To understand the relationship between the structure and substrate specificity of these enzymes, we precisely examined the roles of key residues for substrate recognition by X-ray structural and kinetic parameter analyses of mutant enzymes and successfully obtained mutants in which the substrate specificity of each enzyme is partially converted into that of another.     

Two-site binding of beta-cyclodextrin to the Alzheimer Abeta(1-40) peptide measured with combined PFG-NMR diffusion and induced chemical shifts

The interactions of Alzheimer's amyloid beta-peptide with cyclodextrins were studied by (1)H NMR: the translational diffusion coefficient of the peptide and chemical shift changes were studied by the presence of variable concentrations of cyclodextrins. For the full-length peptide, Abeta(1-40), the combined results of translational diffusion and chemical shift changes are consistent with a model where aromatic side chains interact with beta-cyclodextrin with dissociation constants in the millimolar range. The diffusion data were consistent with two beta-cyclodextrin molecules bound per peptide. The binding occurs at two sites, at F(19) and/or F(20) and at Y(10), with dissociation constants K(d)(F) = 4.7 mM and K(d)(Y) = 6.6 mM, respectively, in 10 mM sodium phosphate, pH 7.4 and 298 K. Shorter Alzheimer peptide fragments were studied to measure specific affinities for different binding sites. The N-terminal fragment Abeta(1-9) with a putative binding site at F(4) does not show measurable affinity for beta-cyclodextrin. The fragment Abeta(12-28) has similar apparent affinity (K(d) = 3.8 mM) to beta-cyclodextrin as the full-length peptide Abeta(1-40). Here, the diffusion data suggests a one-to-one stoichiometry, and the binding site is F(19) and/or F(20). Both diffusion results and chemical shift changes give the same affinity. A variant Abeta(12-28)G(19)G(20) without phenylalanines does not bind to beta-cyclodextrin. Other potential ligands, alpha-cyclodextrin, gamma-cyclodextrin, nicotine, and nornicotine do not bind to the Abeta(12-28) fragment. This study shows that combined (1)H NMR diffusion and chemical shift changes may be used to quantitatively determine affinities and stoichiometries of weak interactions, using unlabeled ligands and hosts of comparable sizes.     

Mechanism of the T286A-mutant alphaCaMKII interactions with Ca2+/calmodulin and ATP

The role of adenosine 5'-triphosphate (ATP) in the activation mechanism of alpha-Ca(2+)/calmodulin-dependent protein kinase II (alphaCaMKII) was investigated using the T286A non-autophosphorylatable mutant of alphaCaMKII. Characterization of the T286A-alphaCaMKII mutant revealed k(cat) = 0.06 +/- 0.02 s(-1) for the T286A mutant, a 6 (+/- 2)-fold lower value compared to wild-type alphaCaMKII with 100 microM smooth muscle myosin light chain (MLC) as substrate. MLC phosphorylation by the T286A mutant and wild-type alphaCaMKII was cooperative, with Hill coefficients 2.3 +/- 0.1 and 2.4 +/- 0.3, respectively. K(m) values for MLC were 96 +/- 28 microM with T286A-alphaCaMKII and 49 +/- 29 microM for wild-type alphaCaMKII. Thus, while the activity of alphaCaMKII was sensitive to mutation of the Thr(286) residue to Ala, the mechanisms of the wild-type and T286A mutant enzyme appeared similar. K(d) for Ca(2+)/calmodulin was 2-fold reduced to 40 nM compared to that of wild-type alphaCaMKII (75 nM). ATP induced a 9-fold stabilization of Ca(2+)/calmodulin binding to the T286A mutant enzyme. Fluorescence stopped-flow kinetic experiments revealed that two Ca(2+)/calmodulin-enzyme complexes were formed, the first, unaffected by ATP, with association and dissociation rate constants of 2 x 10(7) M(-1) s(-1) and 5 s(-1), respectively, containing calmodulin in extended conformation. The second complex, in which calmodulin adopted a compact conformation, was formed with association rate constant 3 x 10(6) M(-1) s(-1) and dissociation at 0.15 s(-1) in the absence and 0.015 s(-1) in the presence of ATP. These data show that ATP is involved in the activation mechanism by forming two classes of Ca(2+)/calmodulin.alphaCaMKII.ATP complex. It is likely that only one of the complexes is on the activation pathway.     

Synthesis of mono-glucose-branched cyclodextrins with a high inclusion ability for doxorubicin and their efficient glycosylation using Mucor hiemalis endo-beta-N-acetylglucosaminidase

The mono-glucose-branched cyclodextrins having an appropriate spacer between the beta-cyclodextrin and a glucose moiety were synthesized from beta-cyclodextrin and arbutin. They had the significantly high association constants for doxorubicin, the anticancer agent, in the range of 10(5)-10(6)M(-1), and worked as highly reactive glycosyl acceptors for the transglycosylation reaction by endo-beta-N-acetylglucosaminidase of Mucor hiemalis to produce sialo-complex type oligosaccharide-branched cyclodextrins in the high yields of 65-67%.     

Crystallization and X-ray crystallographic studies of wild-type and mutant tryptophan synthase alpha-subunits from Escherichia coli

The alpha-subunit of Escherichia coli tryptophan synthase (aTS), a component of the tryptophan synthase alpha2beta2 complex, is a monomeric 268-residues protein (Mr = 28,600). alphaTS by itself catalyzes the cleavage of indole-3-glycerol phosphate to glyceraldehyde-3-phosphate and indole, which is converted to tryptophan in tryptophan biosynthesis. Wild-type and P28L/Y173F double mutant alpha-subunits were overexpressed in E. coli and crystallized at 298 K by the hanging-drop vapor-diffusion method. X-ray diffraction data were collected to 2.5 angstroms resolution from the wild-type crystals and to 1.8 angstroms from the crystals of the double mutant, since the latter produced better quality diffraction data. The wild-type crystals belonged to the monoclinic space group C2 (a = 155.64 angstroms, b = 44.54 angstroms, c = 71.53 angstroms and beta = 96.39 degrees) and the P28L/Y173F crystals to the monoclinic space group P21 (a = 71.09 angstroms, b = 52.70, c = 71.52 angstroms, and beta = 91.49 degrees). The asymmetric unit of both structures contained two molecules of aTS. Crystal volume per protein mass (V(m)) and solvent content were 2.15 angstroms3 Da(-1) and 42.95% for the wild-type and 2.34 angstroms3 Da(-1) and 47.52% for the double mutant.     

Interaction of cyclodextrins with fluorescent probes and its application to kinetic studies of amylase.

It was found that 6-p-toluidinylnaphthalene-2-sulfonate (TNS) showed pronounced fluorescence enhancement when it was added to alpha-, beta-, and gamma-cyclodextrin solutions. 2. The following results were obtained by quantitative study of the interactions of three kinds of cyclodextrins with TNS by following TNS fluorescence at pH5.3. and 25 degrees. i) alpha-Cyclodextrin forms a l : l complex with TNS. ii) beta- and gamma-Cyclodextrins form 1 : 1 and also 2 : 1 complexes; in the latter two cyclodextrin molecules bind to one TNS molecule. iii) The dissociation constants of cyclodextrin-TNS complexes were determined to be 54.9 mM for alpha-cyclodextrin, 0.65 mM for beta-cyclodextrin and 0.66 mM for gamma-cyclodextrin in the 1 : 1 complex, and the secondary dissociation constants in the 2 : 1 complex were 71.4 mM for beta-cyclodextrin in the 1 : 1 complex, and the secondary dissociation constants in the 2 : 1 complex were 71.4 mM for beta-cyclodextrin and 32.6 mM for gamma-cyclodextrin. iv)...     

Crystal structure of a deletion mutant of a tyrosyl-tRNA synthetase complexed with tyrosine

The crystal structure of a deletion mutant of tyrosyl-tRNA synthetase from Bacillus stearothermophilus has been determined at 2.5 A resolution using molecular replacement techniques. The genetically engineered molecule catalyses the activation of tyrosine with kinetic properties similar to those of the wild-type enzyme but no longer binds tRNATyr. It contains 319 residues corresponding to the region of the polypeptide chain for which interpretable electron density is present in crystals of the wild-type enzyme. The partly refined model of the wild-type enzyme was used as a starting point in determining the structure of the truncated mutant. The new crystals are of space group P2(1) and contain the molecular dimer within the asymmetric unit. The refined model has a crystallographic R-factor of 18.7% for all reflections between 8 and 2.5 A. Each subunit contains two structural domains: the alpha/beta domain (residues 1 to 220) containing a six-stranded beta-sheet and the alpha-helical domain (residues 248 to 319) containing five helices. The alpha/beta domains are related by a non-crystallographic dyad while the alpha-helical domains are in slightly different orientations in the two subunits. The tyrosine substrate binds in a slot at the bottom of a deep active site cleft in the middle of the alpha/beta domain. It is surrounded by polar side-chains and water molecules that are involved in an intricate hydrogen bonding network. Both the alpha-amino and hydroxyl groups of the substrate make good hydrogen bonds with the protein. The amino group forms hydrogen bonds with Tyr169-OH, Asp78-OD1 and Gln173-OE1. The phenolic hydroxyl group forms hydrogen bonds with Asp76-OD1 and Tyr34-OH. In contrast, the substrate carboxyl group makes no direct interactions with the enzyme. The results of both substrate inhibition studies and site-directed mutagenesis experiments have been examined in the light of the refined structure.     

Heterodimeric complex of RAR and RXR nuclear receptor ligand-binding domains: purification, crystallization, and preliminary X-ray diffraction analysis

Both the human retinoic acid receptor alpha (hRARalpha) and a constitutively active mutant (F318A) of the mouse retinoid X receptor alpha (mRXR alpha F318A) ligand-binding domains were separately overexpressed in Escherichia coli, copurified as a heterodimer in a two-step procedure, and cocrystallized with an RAR alpha-specific antagonist by using polyethylene glycol 10,000 as precipitant. The crystals grew in the hexagonal space group P6(1)22 displaying the unit cell parameters a = b = 116.6 A and c = 207.8 A. They diffracted X-ray to a limit of 2.2-A resolution. The asymmetric unit comprises one heterodimer and the crystal contains 60% solvent. The structure was determined by molecular replacement and is currently being refined.     

Refined structures of oxidized flavodoxin from Anacystis nidulans

Flavodoxin from Anacystis nidulans (Synechococcus PCC 7942) was the first member of the flavodoxin family to be characterized, and is the structural prototype for the "long-chain" flavodoxins that have molecular masses of approximately 20 kDa. Crystal structure analyses and refinements of three orthorhombic forms of oxidized A. nidulans flavodoxin are reported, and salient features of the fold and the FMN binding site are compared with other flavodoxins. The structure of form I (wild-type: P212121, a=57.08 A, b=69.24 A, c=45.55 A), determined initially by multiple isomorphous replacement, has been refined to R=0.183 and R(free)=0.211 for data from 10.0 to 1.7 A resolution. Structures of form II (wild-type: P212121, a=60.05 A, b=65.85 A, c=51.36 A) and form III (Asn58Gly: P212121, a=51.30 A, b=59.15 A, c=94.44 A) have been determined by molecular replacement and refined versus data to 2.0 A and 1.85 A, respectively; the R values for forms II and III are 0.147 and 0.150. Changes in the molecular contacts that produce the alternative packings in these crystalline forms are analyzed. Deletion of the Asn side-chain in the mutant Asn58Gly removes an intermolecular stacking interaction and allows the alternative packing found in form III crystals. The functionally important 50's loop of the FMN binding site is less restrained by intermolecular contacts in these crystals but maintains the same conformation as in oxidized wild type protein. The structures reported here provide the starting point for structure-function studies of the reduced states and of mutants, described in the accompanying paper.     

Probing the dynamics of a mobile loop above the active site of L1, a metallo-beta-lactamase from Stenotrophomonas maltophilia, via site-directed mutagenesis and stopped-flow fluorescence spectroscopy

A structural feature shared by the metallo-beta-lactamases is a flexible loop of amino acids that extends over their active sites and that has been proposed to move during the catalytic cycle of the enzymes, clamping down on substrate. To probe the movement of this loop (residues 152-164), a site-directed mutant of metallo-beta-lactamase L1 was engineered that contained a Trp residue on the loop to serve as a fluorescent probe. It was necessary first, however, to evaluate the contribution of each native Trp residue to the fluorescence changes observed during the catalytic cycle of wild-type L1. Five site-directed mutants of L1 (W39F, W53F, W204F, W206F, and W269F) were prepared and characterized using metal analyses, CD spectroscopy, steady-state kinetics, stopped-flow fluorescence, and fluorescence titrations. All mutants retained the wild-type tertiary structure and bound Zn(II) at levels comparable with wild type and exhibited only slight (<10-fold) decreases in k(cat) values as compared with wild-type L1 for all substrates tested. Fluorescence studies revealed a single mutant, W39F, to be void of the fluorescence changes observed with wild-type L1 during substrate binding and catalysis. Using W39F as a template, a Trp residue was added to the flexile loop over the active site of L1, to generate the double mutant, W39F/D160W. This double mutant retained all the structural and kinetic characteristics of wild-type L1. Stopped-flow fluorescence and rapid-scanning UV-visible studies revealed the motion of the loop (k(obs) = 27 +/- 2 s(-1)) to be similar to the formation rate of a reaction intermediate (k(obs) = 25 +/- 2 s(-1)).     

Structure of oxidized bacteriophage T4 glutaredoxin (thioredoxin). Refinement of native and mutant proteins.

The structure of wild-type bacteriophage T4 glutaredoxin (earlier called thioredoxin) in its oxidized form has been refined in a monoclinic crystal form at 2.0 A resolution to a crystallographic R-factor of 0.209. A mutant T4 glutaredoxin gives orthorhombic crystals of better quality. The structure of this mutant has been solved by molecular replacement methods and refined at 1.45 A to an R-value of 0.175. In this mutant glutaredoxin, the active site residues Val15 and Tyr16 have been substituted by Gly and Pro, respectively, to mimic that of Escherichia coli thioredoxin. The main-chain conformation of the wild-type protein is similar in the two independently determined molecules in the asymmetric unit of the monoclinic crystals. On the other hand, side-chain conformations differ considerably between the two molecules due to heterologous packing interactions in the crystals. The structure of the mutant protein is very similar to the wild-type protein, except at mutated positions and at parts involved in crystal contacts. The active site disulfide bridge between Cys14 and Cys17 is located at the first turn of helix alpha 1. The torsion angles of these residues are similar to those of Escherichia coli thioredoxin. The torsion angle around the S-S bond is smaller than that normally observed for disulfides: 58 degrees, 67 degrees and 67 degrees for wild-type glutaredoxin molecule A and B and mutant glutaredoxin, respectively. Each sulfur atom of the disulfide cysteines in T4 glutaredoxin forms a hydrogen bond to one main-chain nitrogen atom. The active site is shielded from solvent on one side by the beta-carbon atoms of the cysteine residues plus side-chains of residues 7, 9, 21 and 33. From the opposite side, there is a cleft where the sulfur atom of Cys14 is accessible and can be attacked by a nucleophilic thiolate ion in the initial step of the reduction reaction.     

The 'pair of sugar tongs' site on the non-catalytic domain C of barley alpha-amylase participates in substrate binding and activity

Some starch-degrading enzymes accommodate carbohydrates at sites situated at a certain distance from the active site. In the crystal structure of barley alpha-amylase 1, oligosaccharide is thus bound to the 'sugar tongs' site. This site on the non-catalytic domain C in the C-terminal part of the molecule contains a key residue, Tyr380, which has numerous contacts with the oligosaccharide. The mutant enzymes Y380A and Y380M failed to bind to beta-cyclodextrin-Sepharose, a starch-mimic resin used for alpha-amylase affinity purification. The K(d) for beta-cyclodextrin binding to Y380A and Y380M was 1.4 mm compared to 0.20-0.25 mm for the wild-type, S378P and S378T enzymes. The substitution in the S378P enzyme mimics Pro376 in the barley alpha-amylase 2 isozyme, which in spite of its conserved Tyr378 did not bind oligosaccharide at the 'sugar tongs' in the structure. Crystal structures of both wild-type and S378P enzymes, but not the Y380A enzyme, showed binding of the pseudotetrasaccharide acarbose at the 'sugar tongs' site. The 'sugar tongs' site also contributed importantly to the adsorption to starch granules, as Kd = 0.47 mg.mL(-1) for the wild-type enzyme increased to 5.9 mg.mL(-1) for Y380A, which moreover catalyzed the release of soluble oligosaccharides from starch granules with only 10% of the wild-type activity. beta-cyclodextrin both inhibited binding to and suppressed activity on starch granules for wild-type and S378P enzymes, but did not affect these properties of Y380A, reflecting the functional role of Tyr380. In addition, the Y380A enzyme hydrolyzed amylose with reduced multiple attack, emphasizing that the 'sugar tongs' participates in multivalent binding of polysaccharide substrates.     

The crystal structure of isopropyl 1-thio-beta-D-galactopyranoside monohydrate at 123 K

The crystal structure of isopropyl 1-thio-beta-D-galactopyranoside monohydrate is orthorhombic, P2(1)2(1)2(1), Z = 4, with cell dimensions at 123 K [293 K] of a = 7.983(1) [8.037(1)], b = 24.574(5) [24.709(4)], c = 6.329(1) [6.3736(8)] A, V = 1241.84 [1265.71] A3. The calculated and measured density is Dx = 1.371 [1.345] g cm-3, Dm = [1.340] g cm-3. Diffraction data were obtained with CuK alpha radiation and a Nonius CAD-4 diffractometer. The structure was solved by using MULTAN, and refined to R(F2) = 0.051, RW(F2) = 0.078, R(F) = 0.029, S = 1.16 for 1502 reflections. The molecule has the 4C1(D) conformation. The orientation of the primary alcohol group is gauche/trans, and that about the glycosidic C-S bond is (-)synclinal relative to the ring C-O bond. Although this compound does not form thermotropic liquid crystals, it has two crystal-to-crystal phase-transitions, at 70 and 104 degrees, prior to melting at 126 degrees. The crystal structure has a characteristic, amphiphilic, head-to-head bilayer molecular packing, with intercalated alkyl groups. The water molecule is included in the hydrogen-bond structure that links the galactoside moieties.     

His92Ala mutation in ribonuclease T1 induces segmental flexibility. An X-ray study.

In the genetically mutated ribonuclease T1 His92Ala (RNase T1 His92Ala), deletion of the active site His92 imidazole leads to an inactive enzyme. Attempts to crystallize RNase T1 His92Ala under conditions used for wild-type enzyme failed, and a modified protocol produced two crystal forms, one obtained with polyethylene glycol (PEG), and the other with phosphate as precipitants. Space groups are identical to wild-type RNase T1, P2(1)2(1)2(1), but unit cell dimensions differ significantly, associated with different molecular packings in the crystals; they are a = 31.04 A, b = 62.31 A, c = 43.70 A for PEG-derived crystals and a = 32.76 A, b = 55.13 A, c = 43.29 A for phosphate-derived crystals, compared to a = 48.73 A, b = 46.39 A, c = 41.10 A for uncomplexed wild-type RNase T1. The crystal structures were solved by molecular replacement and refined by stereochemically restrained least-squares methods based on Fo greater than or equal to sigma (Fo) of 3712 reflections in the resolution range 10 to 2.2 A (R = 15.8%) for the PEG-derived crystal and based on Fo greater than or equal to sigma (Fo) of 6258 reflections in the resolution range 10 to 1.8 A (R = 14.8%) for the phosphate-derived crystal. The His92Ala mutation deletes the hydrogen bond His92N epsilon H ... O Asn99 of wild-type RNase T1, thereby inducing structural flexibility and conformational changes in the loop 91 to 101 which is located at the periphery of the globular enzyme. This loop is stabilized in the wild-type protein by two beta-turns of which only one is retained in the crystals obtained with PEG. In the crystals grown with phosphate as precipitant, both beta-turns are deleted and the segment Gly94-Ala95-Ser96-Gly97 is so disordered that it is not seen at all. In addition, the geometry of the guanine binding site in both mutant studies is different from "empty" wild-type RNase T1 but similar to that found in complexes with guanosine derivatives: the Glu46 side-chain carboxylate hydrogen bonds to Tyr42 O eta; water molecules that are present in the guanine binding site of "empty" wild-type RNase T1 are displaced; the Asn43-Asn44 peptide is flipped such that phi/psi-angles of Asn44 are in alpha L-conformation (that is observed in wild-type enzyme when guanine is bound).(ABSTRACT TRUNCATED AT 400 WORDS)     

Evaluation of newly synthesized and commercially available charged cyclomaltooligosaccharides (cyclodextrins) for capillary electrokinetic chromatography

A highly new charged cyclodextrin (CD) derivatives, (6-O-carboxymethyl-2,3-di-O-methyl)cyclomaltoheptaoses (CDM-beta-CDs), was synthesized and characterized as anionic reagents for capillary electrophoresis (CE) in an electrokinetic chromatography mode of separation. Substitution with dimethyl groups at the secondary hydroxyl sites of the CD is aimed at influencing the magnitude and selectivity of analyte-CD interactions, while substitution by carboxymethyl groups at the primary hydroxyl sites provides for high charge and electrophoretic mobility. Full regioselective methylation at the secondary hydroxyl sites was achieved in this work, while substitution at the primary hydroxyl sites generated a mixture of multiply charged products. The separation performance of CDM-beta-CD was evaluated using a variety of analyte mixtures. The results obtained from commercially available negatively charged cyclodextrins, heptakis(2,3-di-O-methyl-6-O-sulfo)cyclomaltoheptaose (HDMS-beta-CD) and O-(carboxymethyl)cyclomaltoheptaose (CM-beta-CD) with an average degree of substitution one (DS 1), were compared to CDM-beta-CD using a sample composed of eight positional isomers of dihydroxynaphthalene. Four hydroxylated polychlorobiphenyl derivatives, a group of chiral and isomeric catchecins, and chiral binaphthyl compounds were also separated with CDM-beta-CD. The effect of adding neutral beta-cyclodextrin (beta-CD) into the running buffer containing charged cyclodextrins was investigated and provided evidence of significant inter-CD interactions. Under certain running buffer conditions, the charged cyclodextrins also appear to adsorb to the capillary walls to various degrees.