IHF is the limiting host factor in transposition of Pseudomonas putida transposon Tn4652 in stationary phase

Transpositional activity of mobile elements is not constant. Conditional regulation of host factors involved in transposition may severely change the activity of mobile elements. We have demonstrated previously that transposition of Tn4652 in Pseudomonas putida is a stationary phase-specific event, which requires functional sigma S (Ilves et al., 2001, J Bacteriol 183: 5445-5448). We hypothesized that integration host factor (IHF), the concentration of which is increased in starving P. putida, might contribute to the transposition of Tn4652 as well. Here, we demonstrate that transposition of Tn4652 in stationary phase P. putida is essentially limited by the amount of IHF. No transposition of Tn4652 occurs in a P. putida ihfA-defective strain. Moreover, overexpression of IHF results in significant enhancement of transposition compared with the wild-type strain. This indicates that the amount of IHF is a bottleneck in Tn4652 transposition. Gel mobility shift and DNase I footprinting studies revealed that IHF is necessary for the binding of transposase to both transposon ends. In vitro, transposase can bind to inverted repeats of transposon only after the binding of IHF. The results obtained in this study indicate that, besides sigma S, IHF is another host factor that is implicated in the elevation of transposition in stationary phase.     

The ColR-ColS two-component signal transduction system is involved in regulation of Tn4652 transposition in Pseudomonas putida under starvation conditions

Bacteria use two-component signal transduction pathways to sense both extracellular and intracellular environment and to coordinate cellular events according to changing conditions. Adaptation can be either physiological or genetical. Here, we present evidence that a genome reorganization process such as transposition can be controlled by certain environmental cues sensed by a two-component signal transduction system. We demonstrate that transposition-dependent accumulation of phenol-utilizing mutants is severely decreased in Pseudomonas putida defective in a two-component system colRS. Translocation of Tn4652 is decreased both in colR- and colS-defective strains, indicating that signal transduction from a histidine kinase ColS to a response regulator ColR is necessary for the activation of Tn4652 in bacteria starving on phenol. However, overexpression of ColR in a colS-defective strain restores Tn4652 transposition, suggesting that absence of the signal from ColS can be compensated by an elevated amount of ColR. In vitro analysis of purified ColR and ColS proteins evidenced that they constitute a functional phosphorelay. Site-directed mutagenesis revealed that a conserved H221 can be the phosphoryl-accepting residue in ColS and that aspartate residues D8 and D51 of ColR are necessary for the phosphotransfer from ColS to ColR. To our knowledge, Tn4652 is the first bacterial transposon regulated by a two-component system. This finding indicates that transpositional activity can respond to signals sensed and processed by the host.     

Insertion site specificity of the transposon Tn3.

The Tn3-deletion method [Davies and Hutchison, Nucleic Acids Res. 19, 5731-5738, (1991)] was used to sequence a 9.4 kb DNA fragment. Transpositional 'warm' spots were not a limiting factor but a 935 bp 'cold' spot was completed using a synthetic oligonucleotide primer. Two hundred and twenty three miniTn3 insertion sites from three sequencing projects were aligned and a 19 bp asymmetric consensus site was identified. There is no absolute sequence requirement at any position in this consensus, so insertion occurs promiscuously (approximately 37% of sites are potential targets). In our sequencing projects, multiply targeted sites always closely matched the consensus, although not all close matches were targeted frequently. The 935 bp cold spot showed no unusual features when analysed with the consensus sequence. The consensus can be used to accurately predict likely insertion sites in a new sequence. Synthetic oligonucleotides based on the consensus and a known hot spot for Tn3 were mutagenised. These sequences were not hot spots in our vectors, suggesting that the primary sequence alone is not sufficient to create an insertional hot spot. We conclude that some other factor, such as DNA secondary structure, also plays an important role in target site selection for the transposon Tn3.     

Characterization of Pseudomonas mercury-resistance transposon Tn502, which has a preferred insertion site in RP1

Tn502mer differs in size and restriction map from the well-characterized Tn501mer. It also differs in its preferential and high-frequency insertion into the 6 kb PstI-C region of RP1. The affinity for this region is perpetuated in pVS76, a clone of RP1 PstI-C in pBR322. Restriction mapping of independent pVS76::Tn502 derivatives revealed that Tn502 inserted at the same site (or small region) in PstI-C corresponding to the 35 kb coordinate in RP1. Insertion occurred in both orientations, but one was preferred. When PstI-C was deleted from RP1, acquisition of Tn502 was reduced and the sites of insertion randomized.     

Behavior and target site selection of conjugative transposon Tn916 in two different strains of toxigenic Clostridium difficile

The insertion sites of the conjugative transposon Tn916 in the anaerobic pathogen Clostridium difficile were determined using Illumina Solexa high-throughput DNA sequencing of Tn916 insertion libraries in two different clinical isolates: 630ΔE, an erythromycin-sensitive derivative of 630 (ribotype 012), and the ribotype 027 isolate R20291, which was responsible for a severe outbreak of C. difficile disease. A consensus 15-bp Tn916 insertion sequence was identified which was similar in both strains, although an extended consensus sequence was observed in R20291. A search of the C. difficile 630 genome showed that the Tn916 insertion motif was present 100,987 times, with approximately 63,000 of these motifs located in genes and 35,000 in intergenic regions. To test the usefulness of Tn916 as a mutagen, a functional screen allowed the isolation of a mutant. This mutant contained Tn916 inserted into a gene involved in flagellar biosynthesis.     

Tn2001, a transposon encoding chloramphenicol resistance in Pseudomonas aeruginosa.

We isolated a new transposon, Tn2001, from the group P-2 plasmid Rms159-1 in Pseudomonas aeruginosa. Tn2001-encoded chloramphenicol resistance did not result from the formation of chloramphenicol acetyltransferase. Tn2001 was transposable between temperate phages and conjugative and nonconjugative plasmids belonging to various incompatibility groups, including P-1, P-3, P-4, P-5, P-7, and P-8 in P. aeruginosa. Transposition occurred independently of the general recombination ability of the Pseudomonas host, and its frequency varied between 10(-1) and 10(-8), depending upon the donor and recipient replicons. Tn2001 transposition also occurred in a recombination-deficient strain of Escherichia coli. Agarose gel electrophoresis and electron microscopic observations revealed that Tn2001 could transpose to different sites in the RP4 replicon and that the transposed deoxyribonucleic acid fragment was 2.1 kilobases long.     

Target DNA bending is an important specificity determinant in target site selection in Tn10 transposition

The bacterial transposon Tn10 inserts preferentially into specific DNA sequences. DNA footprinting and interference studies have revealed that the Tn10-encoded transposase protein contacts a large stretch of target DNA ( approximately 24 bp) and that the target DNA structure is deformed upon incorporation into the transpososome. Target DNA deformation might contribute significantly to target site selection and thus it is of interest to further define the nature of this deformation. Circular permutation analysis was used to demonstrate that the target DNA is bent upon its incorporation into the transpososome. Two lines of evidence are presented that target DNA bending is an important event in target site selection. First, we demonstrate a correlation between increased target site usage and an increased level of target DNA bending. Second, transposase mutants with relaxed target specificity are shown to cause increased target DNA bending relative to wild-type transposase. This latter observation provides new insight into how relaxed specificity may be achieved. We also show that Ca(2+) facilitates target capture by stabilizing transposase interactions with sequences immediately flanking the insertion site. Ca(2+) could, in theory, exert this effect by stabilizing bends in the target DNA.     

Nucleotide sequence of a gene from the Pseudomonas transposon Tn501 encoding mercuric reductase

We have determined the nucleotide sequence of the merA gene from the mercury-resistance transposon Tn501 and have predicted the structure of the gene product, mercuric reductase. The DNA sequence predicts a polypeptide of Mr 58 660, the primary structure of which shows strong homologies to glutathione reductase and lipoamide dehydrogenase, but mercuric reductase contains as additional N-terminal region that may form a separate domain. The implications of these comparisons for the tertiary structure and mechanism of mercuric reductase are discussed. The DNA sequence presented here has an overall G+C content of 65.1 mol%, typical of the bulk DNA of Pseudomonas aeruginosa from which Tn501 was originally isolated. Analysis of the codon usage in the merA gene shows that codons with C or G at the third position are preferentially utilized.     

Expression of the lactose transposon Tn951 in Escherichia coli, Proteus and Pseudomonas

The control of beta-galactosidase specified by the lactose transposon Tn951 (inserted into RP1 to give pGC9114) has been studied in Escherichia coli K12, Proteus mirabilis, Pseudomonas aeruginosa and Pseudomonas putida; in the first two species comparison could be made with Flac. In E. coli K12, the Tn951 and chromosomally encoded enzymes showed marked qualitative differences in regulatio, the former giving a substantially lower maximum induced level and induction ratio. Several parameters were slightly affected by strain background. In P. mirabilis, beta-galactosidase control determined by both Flac (in accord with earlier work) and pGC9114 was markedly different from E. coli in that maximal induced levels were about an order of magnitude lower and the induction ratio was reduced to 3 to 5. In Ps. aeruginosa and Ps. putida, Tn951-specified lac expression was qualitatively similar to that in P. mirabilis. Possible reasons for anomalous expression in Proteus and Pseudomonas are discussed.     

Integration site selection by the Bacteroides conjugative transposon CTnBST

A newly discovered Bacteroides conjugative transposon (CTn), CTnBST, integrates more site specifically than two other well-studied CTns, the Bacteroides CTn CTnDOT and the enterococcal CTn Tn916. Moreover, the integrase of CTnBST, IntBST, had the C-terminal 6-amino-acid signature that is associated with the catalytic regions of members of the tyrosine recombinase family, most of which integrate site specifically. Also, in most of these integrases, all of the conserved amino acids are required for integration. In the case of IntBST, however, we found that changing three of the six conserved amino acids in the signature, one of which was the presumed catalytic tyrosine, resulted in a 1,000-fold decrease in integration frequency. Changes in the other amino acids had little or no effect. Thus, although the CTnBST integrase still seems to be a member of the tyrosine recombinase family, it clearly differs to some extent from other members of the family in its catalytic site. We also determined the sequence requirements for CTnBST integration in the 18-bp region where the crossover occurs preferentially during integration. We found that CTnBST integrates in this preferred site about one-half of the time but can also use other sites. A consensus sequence was tentatively derived by comparison of a few secondary sites: AATCTGNNAAAT. We report here that within the consensus region, no single base change affected the frequency of integration. However, 3 bp at one end of the consensus sequence (CTG) proved to be essential for integration into the preferred site. This sequence appeared to be at one end of a 7-bp crossover region, CTGNNAA. The other bases could vary without affecting either integration frequency or specificity. Thus, in contrast to well-studied site-specific recombinases which require homology throughout the crossover region, integration of CTnBST requires homology at one end of the crossover region but not at the other end.     

Protocols for yTREX/Tn5-based gene cluster expression in Pseudomonas putida

Bacterial gene clusters, which represent a genetic treasure trove for secondary metabolite pathways, often need to be activated in a heterologous host to access the valuable biosynthetic products. We provide here a detailed protocol for the application of the yTREX ‘gene cluster transplantation tool’: Via yeast recombinational cloning, a gene cluster of interest can be cloned in the yTREX vector, which enables the robust conjugational transfer of the gene cluster to bacteria like Pseudomonas putida, and their subsequent transposon Tn5-based insertion into the host chromosome. Depending on the gene cluster architecture and chromosomal insertion site, the respective pathway genes can be transcribed effectively from a chromosomal promoter, thereby enabling the biosynthesis of a natural product. We describe workflows for the design of a gene cluster expression cassette, cloning of the cassette in the yTREX vector by yeast recombineering, and subsequent transfer and expression in P. putida. As an example for yTREX-based transplantation of a natural product biosynthesis, we provide details on the cloning and activation of the phenazine-1-carboxylic acid biosynthetic genes from Pseudomonas aeruginosa in P. putidaKT2440 as well as the use of β-galactosidase-encoding lacZ as a reporter of production levels.     

Improved method of selection for mutants of Pseudomonas putida.

Optimum conditions for enrichment of mutants of Pseudomonas putida in liquid culture were established using a procedure which combines N-methyl-N'-nitro-N-nitrosoguanidine mutagenesis with an improved D-cycloserine selection.     

Genetic organization of transposon Tn10

Transposon Tn10 is 9300 bp in length, with 1400 bp inverted repeats at its ends. The inverted repeats are structurally intact IS-like sequences (Ross et al., 1979). Analysis of deletion mutants and structural variants of Tn10, reported below, shows that the two IS10 segments contain all of the Tn10-encoded genetic determinants, both sites and functions, that are required for transposition. Furthermore, the two repeats (IS10-Right and IS10-Left) are not functionally equivalent: IS10-Right is fully functional and is capable by itself of promoting normal levels of Tn10 transposition; IS10-Left functions only poorly by itself, promoting transposition at a very low level when IS10-Right is inactivated. Complementation analysis shows that IS10-Right encodes at least one function, required for Tn10 transposition, which can act in trans and which works at the ends of the element. Also, all of the sites specifically required for normal Tn10 transposition have been localized to the outermost 70 bp at each end of the element; there is no evidence that specific sites internal to the element play an essential role. Finally, Tn10 modulates its own transposition in such a way that transposition-defective point mutants, unlike deletion mutants, are not complemented by functions provided in trans; and wild-type Tn10, unlike deletion mutants, is not affected by functions provided in trans from a "high hopper" Tn10 element.     

The tetracycline-resistance transposon Tn10 inhibits translocation of Tn10

Summary Using a set of overlapping deletion mutants in the tetracycline-resistance transposon Tn10, it has been established that certain regions of the Tn10 genome exert a powerful inhibition on translocation of an intact Tn10 element into the bacterial genome. Such inhibition is strongly temperature dependent: at 37° C translocation is inhibited by at least a factor of 100; no inhibition of translocation is detected at 30° C.