Lead removal by Spirulina platensis biomass

In this investigation, we report on the biosorption of Pb (II) from aqueous solutions by the nonliving biomass of the micro-alga (cyanobacterium) Spirulina platensis. Propagation of the micro-alga was carried out in outside oblong raceway ponds. The biomass was cleaned, dried and used for the investigation. The effects of pH, adsorbent dose, temperature, initial concentration of Pb (II), and contact time on the adsorption of lead by the dry biomass were studied. The experiments were carried out in 250 ml conical flasks containing 100 ml of test solutions using an orbital incubator at 150 rpm. Concentrations of the metal before and after the experiments were measured using Atomic Absorption Spectrophotometer. Very high levels of Pb (II) removal (>91%) were obtained. The optimum conditions for maximal adsorption by S. platensis were found to be pH 3; 2 g of adsorbent dose; incubation at 26°C; 100 mg/l of lead initial concentration and 60 minutes of contact time. The experimental data fitted well with Freundlich isotherm equation with R² values greater than 0.97. Based on our results, we recommend the utilization of S. platensis biomass for heavy metal removal from aqueous solutions.     

Spirulina platensis (Arthrospira): Physiology,Cell Biology and Biotechnologym,edited by Avigad Vonshak

Journal of Applied Phycology -     

Cadmium biosorption on Spirulina platensis biomass

Dry biomass of Spirulina platensis re-hydrated for 48 h was employed as a biosorbent in tests of cadmium(II) removal from water. Various concentrations of biomass (from 1 to 4 g l⁻¹) and metal (from 100 to 800 mg l⁻¹) were tested. Low biomass levels (X_o  2 g l⁻¹) ensured metal removal up to 98% only at Cd₀= 100 and 200 mg l⁻¹, while X_o  2.0 g l⁻¹ were needed at Cd₀ = 400 mg l⁻¹ to achieve satisfactory results. Whereas X_o = 4.0 g l⁻¹ was effective to remove up to Cd₀ = 500 mg l⁻¹, a further increase in metal concentration (Cd₀ = 600 and 800 mg l⁻¹) led to progressive worsening of the system performance. At a given biomass levels, the kinetics of the process was better at low Cd²⁺ concentrations, while, raising the adsorbent level from 1.0 to 2.0 g l⁻¹ and then to 4.0 g l⁻¹, the rate constant of biosorption increased by about one order of magnitude in both cases and the adsorption capacity of the system progressively decreased from 357 to 149 mg g⁻¹.