Distinct tubulin genes are differentially expressed during barley grain development

Tubulins, as major components involved in the organization of microtubules, play an important role in plant development. We describe here the expression profiles of all known α-tubulin (TUA), β-tubulin (TUB) and γ-tubulin (TUG) genes of barley ( Hordeum vulgare ), involving eight newly identified TUB sequences, five established TUA genes and one TUG gene. Macroarray and Northern blot-based expression patterns in the pericarp, endosperm and embryo were obtained over the course of the development of the grain between anthesis and maturation. These revealed that the various tubulin genes differed in their levels of expression, and to some extent were tissue specific. Two expression peaks were detected in the developing endosperm. The first and more prominent peak, at 2 days after flowering, included expression of almost all the tubulin genes. These tubulins are thought to be involved in mitoses during the formation of the syncytial endosperm. The second, less pronounced but more extended, peak included only some of the tubulin genes ( HvTUA3 , HvTUB1 and HvTUG ) and might be associated with the cell wall organization in aleurone and starchy endosperm. The HvTUA5 gene is expressed only in embryo of the developing grain and may be associated with shoot establishment. The expression profiles of the tubulin folding cofactors HvTFC A and HvTFC B as well as small G-protein HvArl2 genes were almost perfectly correlated with the global levels of tubulin mRNA, implying that they have a role in the control of the polymerization of α/β-tubulin heterodimers.     

Cloning and characterization of cellulose synthase-like gene, PtrCSLD2 from developing xylem of aspen trees

Genetic improvement of cell wall polymer synthesis in forest trees is one of the major goals of forest biotechnology that could possibly impact their end product utilization. Identification of genes involved in cell wall polymer biogenesis is essential for achieving this goal. Among various candidate cell wall-related genes, cellulose synthase-like D (CSLD) genes are intriguing due to their hitherto unknown functions in cell wall polymer synthesis but strong structural similarity with cellulose synthases (CesAs) involved in cellulose deposition. Little is known about CSLD genes from trees. In the present article PtrCSLD2, a first CSLD gene from an economically important tree, aspen (Populus tremuloides) is reported. PtrCSLD2 cDNA was isolated from an aspen xylem cDNA library and encodes a protein that shares 90% similarity with Arabidopsis AtCSLD3 protein involved in root hair tip growth. It is possible that xylem fibers that also grow by intrusive tip growth may need expression of PtrCSLD2 for controlling the length of xylem fibers, a wood quality trait of great economical importance. PtrCSLD2 protein has a N-terminal cysteine-rich putative zinc-binding domain; eight transmembrane domains; alternating conserved and hypervariable domains; and a processive glycosyltransferases signature, D, D, D, QXXRW; all similar to aspen CesA proteins. However, PtrCSLD2 shares only 43-48% overall identity with the known aspen CesAs suggesting its distinct functional role in cell wall polymer synthesis perhaps other than cellulose biosynthesis. Based on Southern analysis, the aspen CSLD gene family consists of at least three genes and this gene copy estimate is supported by phylogenetic analysis of available CSLDs from plants. Moreover, gene expression studies using RT-PCR and in situ mRNA hybridization showed that PtrCSLD2 is expressed at a low level in all aspen tissues examined with a slightly higher expression level in secondary cell wall-enriched aspen xylem as compared to primary cell wall enriched tissues. Together, these observations suggest that PtrCSLD2 gene may be involved in the synthesis of matrix polysaccharides that are dominant in secondary cell walls of poplar xylem. Future molecular genetic analyses will clarify the functional significance of CSLD genes in the development of woody trees.     

Maturation stress generation in poplar tension wood studied by synchrotron radiation microdiffraction

Tension wood is widespread in the organs of woody plants. During its formation, it generates a large tensile mechanical stress called maturation stress. Maturation stress performs essential biomechanical functions such as optimizing the mechanical resistance of the stem, performing adaptive movements, and ensuring the long-term stability of growing plants. Although various hypotheses have recently been proposed, the mechanism generating maturation stress is not yet fully understood. In order to discriminate between these hypotheses, we investigated structural changes in cellulose microfibrils along sequences of xylem cell differentiation in tension and normal wood of poplar (Populus deltoides × Populus trichocarpa 'I45-51'). Synchrotron radiation microdiffraction was used to measure the evolution of the angle and lattice spacing of crystalline cellulose associated with the deposition of successive cell wall layers. Profiles of normal and tension wood were very similar in early development stages corresponding to the formation of the S1 layer and the outer part of the S2 layer. Subsequent layers were found with a lower microfibril angle (MFA), corresponding to the inner part of the S2 layer of normal wood (MFA approximately 10°) and the G layer of tension wood (MFA approximately 0°). In tension wood only, this steep decrease in MFA occurred together with an increase in cellulose lattice spacing. The relative increase in lattice spacing was found close to the usual value of maturation strains. Analysis showed that this increase in lattice spacing is at least partly due to mechanical stress induced in cellulose microfibrils soon after their deposition, suggesting that the G layer directly generates and supports the tensile maturation stress in poplar tension wood.     

Wood cell walls: biosynthesis, developmental dynamics and their implications for wood properties

Progress has been made toward understanding the biosynthesis and modifications of the cellulose and the hemicellulose/pectin matrix of woody cell walls (and hence wood properties) by identifying 1600 carbohydrate active enzymes (CAZYmes) in Populus, and pinpointing key candidates involved in various developmental stages of wood formation. Transgenic modifications of primary wall modifying enzymes have demonstrated on the possibility of shaping the dimension of wood cells. Candidates for the biosynthesis of secondary wall matrix have been identified, and the cellulose microfibril angle of wood fibers has been modified. In addition, molecular analysis of the plastic development of wood cell walls has provided further information regarding the mechanisms regulating their structure.     

A kinesin-like protein is essential for oriented deposition of cellulose microfibrils and cell wall strength

Cortical microtubules have long been hypothesized to regulate the oriented deposition of cellulose microfibrils. However, the molecular mechanisms of how microtubules direct the orientation of cellulose microfibril deposition are not known. We have used fibers in the inflorescence stems of Arabidopsis to study secondary wall deposition and cell wall strength and found a fragile fiber (fra1) mutant with a dramatic reduction in the mechanical strength of fibers. The fra1 mutation did not cause any defects in cell wall composition, secondary wall thickening, or cortical microtubule organization in fiber cells. An apparent alteration was found in the orientation of cellulose microfibrils in fra1 fiber walls, indicating that the reduced mechanical strength of fra1 fibers probably was attributable to altered cellulose microfibril deposition. The FRA1 gene was cloned and found to encode a kinesin-like protein with an N-terminal microtubule binding motor domain. The FRA1 protein was shown to be concentrated around the periphery of the cytoplasm but absent in the nucleus. Based on these findings, we propose that the FRA1 kinesin-like protein is involved in the microtubule control of cellulose microfibril order.     

Golgi Enrichment and Proteomic Analysis of Developing Pinus radiata Xylem by Free-Flow Electrophoresis

Our understanding of the contribution of Golgi proteins to cell wall and wood formation in any woody plant species is limited. Currently, little Golgi proteomics data exists for wood-forming tissues. In this study, we attempted to address this issue by generating and analyzing Golgi-enriched membrane preparations from developing xylem of compression wood from the conifer Pinus radiata. Developing xylem samples from 3-year-old pine trees were harvested for this purpose at a time of active growth and subjected to a combination of density centrifugation followed by free flow electrophoresis, a surface charge separation technique used in the enrichment of Golgi membranes. This combination of techniques was successful in achieving an approximately 200-fold increase in the activity of the Golgi marker galactan synthase and represents a significant improvement for proteomic analyses of the Golgi from conifers. A total of thirty known Golgi proteins were identified by mass spectrometry including glycosyltransferases from gene families involved in glucomannan and glucuronoxylan biosynthesis. The free flow electrophoresis fractions of enriched Golgi were highly abundant in structural proteins (actin and tubulin) indicating a role for the cytoskeleton during compression wood formation. The mass spectrometry proteomics data associated with this study have been deposited to the ProteomeXchange with identifier PXD000557.     

Localization of cell wall polysaccharides in normal and compression wood of radiata pine: relationships with lignification and microfibril orientation

The distribution of noncellulosic polysaccharides in cell walls of tracheids and xylem parenchyma cells in normal and compression wood of Pinus radiata, was examined to determine the relationships with lignification and cellulose microfibril orientation. Using fluorescence microscopy combined with immunocytochemistry, monoclonal antibodies were used to detect xyloglucan (LM15), β(1,4)-galactan (LM5), heteroxylan (LM10 and LM11), and galactoglucomannan (LM21 and LM22). Lignin and crystalline cellulose were localized on the same sections used for immunocytochemistry by autofluorescence and polarized light microscopy, respectively. Changes in the distribution of noncellulosic polysaccharides between normal and compression wood were associated with changes in lignin distribution. Increased lignification of compression wood secondary walls was associated with novel deposition of β(1,4)-galactan and with reduced amounts of xylan and mannan in the outer S2 (S2L) region of tracheids. Xylan and mannan were detected in all lignified xylem cell types (tracheids, ray tracheids, and thick-walled ray parenchyma) but were not detected in unlignified cell types (thin-walled ray parenchyma and resin canal parenchyma). Mannan was absent from the highly lignified compound middle lamella, but xylan occurred throughout the cell walls of tracheids. Using colocalization measurements, we confirmed that polysaccharides containing galactose, mannose, and xylose have consistent correlations with lignification. Low or unsubstituted xylans were localized in cell wall layers characterized by transverse cellulose microfibril orientation in both normal and compression wood tracheids. Our results support the theory that the assembly of wood cell walls, including lignification and microfibril orientation, may be mediated by changes in the amount and distribution of noncellulosic polysaccharides.     

Overexpression of a developing xylem cDNA library in transgenic poplar generates high mutation rate specific to wood formation

We investigated feasibility of the Full‐length complementary DNA OvereXpression (FOX) system as a mutagenesis approach in poplar, using developing xylem tissue. The main goal was to assess the overall mutation rate and if the system will increase instances of mutants affected in traits linked to the xylem tissue. Indeed, we found a high mutation rate of 17.7%, whereas 80% of all mutants were significantly affected in cellulose, lignin and/or hemicellulose. Cell wall biosynthesis is a major process occurring during xylem development. Enrichment of mutants affected in cell wall composition suggests that the tissue source for the FOX library influenced the occurrence of mutants affected in a trait linked to this tissue. Additionally, we found that FLcDNAs from mutants affected in cell wall composition were homologous to genes known to be involved in cell wall biosynthesis and most recovered FLcDNAs corresponded to genes whose native expression was highest in xylem. We characterized in detail a mutant line with increased diameter. The phenotype was caused by a poplar homolog of LONELY GUY 1 (LOG1), which encodes an enzyme in cytokinin biosynthesis and significantly increased xylem proliferation. The causative role of LOG1 in the observed phenotype was further reaffirmed by elevated cytokinin concentration in the mutant and recapitulation overexpression experiment wherein multiple independent lines phenocopied the original FOX mutant. Our experiments show that the FOX approach can be efficiently used for gene discovery and molecular interrogation of traits specific to woody perennial growth and development.     

实时荧光定量PCR分析中毛果杨内参基因的筛选和验证

实时荧光定量PCR(qRT-PCR)技术具有高灵敏性、高保真性和高特异性, 被广泛应用于基因表达的分析。在数据处理过程中, 选用稳定表达的基因作为内参基因对准确分析实验结果非常关键。以毛果杨(Populus trichocarpa)的不同组织以及锌胁迫下的组培苗为材料, 使用荧光定量PCR方法分析了TUA8、TUB6、ubiquitin、GAPDH、actin、18S rRNA和EF1α 7个看家基因的表达情况。通过geNorm、NormFinder和BestKeeper 3个程序的综合分析, 发现actin、ubiquitin、EF1α和18S rRNA的稳定性较好, 可用作毛果杨基因表达研究的内参基因; 而TUB6在不同组织中稳定性最差; GAPDH在锌胁迫下的组织中稳定性最差, 因此不适宜作为内参基因。毛果杨NAC基因的表达分析, 进一步验证了上述结果。该研究对采用qRT-PCR方法分析毛果杨基因表达过程中内参基因的选择具有指导作用, 同时对揭示NAC基因的功能也有一定的意义。     

Gene expression in Eucalyptus branch wood with marked variation in cellulose microfibril orientation and lacking G-layers

In response to gravitational stresses, angiosperm trees form tension wood in the upper sides of branches and leaning stems in which cellulose content is higher, microfibrils are typically aligned closely with the fibre axis and the fibres often have a thick inner gelatinous cell wall layer (G-layer). Gene expression was studied in Eucalyptus nitens branches oriented at 45 degrees using microarrays containing 4900 xylem cDNAs, and wood fibre characteristics revealed by X-ray diffraction, chemical and histochemical methods. Xylem fibres in tension wood (upper branch) had a low microfibril angle, contained few fibres with G-layers and had higher cellulose and decreased Klason lignin compared with lower branch wood. Expression of two closely related fasciclin-like arabinogalactan proteins and a beta-tubulin was inversely correlated with microfibril angle in upper and lower xylem from branches. Structural and chemical modifications throughout the secondary cell walls of fibres sufficient to resist tension forces in branches can occur in the absence of G-layer enriched fibres and some important genes involved in responses to gravitational stress in eucalypt xylem are identified.