Identification of riboflavin transport by MDCK cells using quantitative fluorescence video microscopy

Summary MDCK cells, when examined by low-light level video microscopy displayed an endogenous fluorescence with two differing patterns. A low intensity emission which was punctate and associated with cell organelles was observed with emission and excitation conditions generally used to observe either fluorescein (450–500 nm excitation/>510 nm emission) or rhodamine (514 nm excitation/>530 emission) type dyes. A second 5- to 10-fold brighter emission for 450–500 nm excitation was observed, which was unusual in that each cell appeared to be outlined. Evidence obtained from spectroscopy and from using culture media of altered composition supported the conclusion that the water-soluble vitamin riboflavin accumulated in the basolateral spaces and fluid-filled domes and was the source of this fluorescent emission. Quantitative measurements showed that exposure to cultures to 10 m riboflavin resulted in accumulation in domes of 565±80 m. The transport rate was calculated to be 189±30 pmol/min-cm². Onemm probenecid, a known inhibitor of riboflavin transport in vivo, reduced transport to 54% of control, while 10mm nearly abolished the uptake. The results demonstrate that removal of riboflavin reduces MDCK cell fluorescence to levels compatable with low-light level imaging. Furthermore, these cells actively transport riboflavin and provide a new in vitro model for this process.     

Multispectral imaging fluorescence microscopy for living cells

Multispectral imaging technologies have been widely used in fields of astronomy and remote sensing. Interdisciplinary approaches developed in, for example, the National Aeronautics and Space Administration (NASA, USA), the Jet Propulsion Laboratory (JPL, USA), or the Communications Research Laboratory (CRL, Japan) have extended the application areas of these technologies from planetary systems to cellular systems. Here we overview multispectral imaging systems that have been devised for microscope applications. We introduce these systems with particular interest in live cell imaging. Finally we demonstrate examples of spectral imaging of living cells using commercially available systems with no need for user engineering.     

Computed tomography-based spectral imaging for fluorescence microscopy

The computed tomography imaging spectrometer (CTIS) is a non-scanning instrument capable of simultaneously acquiring full spectral information (450-750 nm) from every position element within its field of view (75 microm x 75 microm). The current spatial and spectral sampling intervals of the spectrometer are 1.0 microm and 10 nm, respectively. This level of resolution is adequate to resolve signal responses from multiple fluorescence probes located within individual cells or different locations within the same cell. Spectral imaging results are presented from the CTIS combined with a commercial inverted fluorescence microscope. Results demonstrate the capability of the CTIS to monitor the spatiotemporal evolution of pH in rat insulinoma cells loaded with SNARF-1. The ability to analyze full spectral information for two-dimensional (x, y) images allows precise evaluation of heterogeneous physiological responses within cell populations. Due to low signal levels, integration times up to 2 s were required. However, reasonable modifications to the instrument design will provide higher system transmission efficiency with increased temporal and spatial resolution. Specifically, a custom optical design including the use of a larger format detector array is under development for a second-generation system.     

Correlative microscopy: bridging the gap between fluorescence light microscopy and cryo-electron tomography

Cryo-electron tomography of frozen-hydrated biological samples offers a means of studying large and complex cellular structures in three-dimensions and with nanometer-scale resolution. The low contrast of unstained biological material embedded in amorphous ice and the need to minimise the exposure of these radiation-sensitive samples to the electron beam result in a poor signal-to-noise ratio. This poses problems not only in the visualisation and interpretation of such tomograms, it is also a problem in surveying the sample and in finding regions which contain the features of interest and which are suitable for recording tomograms. To address this problem, we have developed a correlative fluorescence light microscopy-electron microscopy approach, which guides the search for the structures of interest and allows electron microscopy to zoom in on them. With our approach, the total dose spent on locating regions of interest is negligible. A newly designed cryo-holder allows imaging of fluorescently labelled samples after vitrification. The absolute coordinates of structures identified and located by cryo-light microscopy are transferred to the electron microscope via a Matlab-based user interface. We have successfully tested the experimental setup and the whole procedure with two types of adherent fluorescently labelled cells, a neuronal cell line and keratinocytes, both grown directly on EM grids.     

Global analysis of fluorescence lifetime imaging microscopy data

Global analysis techniques are described for frequency domain fluorescence lifetime imaging microscopy (FLIM) data. These algorithms exploit the prior knowledge that only a limited number of fluorescent molecule species whose lifetimes do not vary spatially are present in the sample. Two approaches to implementing the lifetime invariance constraint are described. In the lifetime invariant fit method, each image in the lifetime image sequence is spatially averaged to obtain an improved signal-to-noise ratio. The lifetime estimations from these averaged data are used to recover the fractional contribution to the steady-state fluorescence on a pixel-by-pixel basis for each species. The second, superior, approach uses a global analysis technique that simultaneously fits the fractional contributions in all pixels and the spatially invariant lifetimes. In frequency domain FLIM the maximum number of lifetimes that can be fit with the global analysis method is twice the number of lifetimes that can be fit with conventional approaches. As a result, it is possible to discern two lifetimes with a single-frequency FLIM setup. The algorithms were tested on simulated data and then applied to separate the cellular distributions of coexpressed green fluorescent proteins in living cells.     

Analyzing proteome topology and function by automated multidimensional fluorescence microscopy

Temporal and spatial regulation of proteins contributes to function. We describe a multidimensional microscopic robot technology for high-throughput protein colocalization studies that runs cycles of fluorescence tagging, imaging and bleaching in situ. This technology combines three advances: a fluorescence technique capable of mapping hundreds of different proteins in one tissue section or cell sample; a method selecting the most prominent combinatorial molecular patterns by representing the data as binary vectors; and a system for imaging the distribution of these protein clusters in a so-called toponome map. By analyzing many cell and tissue types, we show that this approach reveals rules of hierarchical protein network organization, in which the frequency distribution of different protein clusters obeys Zipf's law, and state-specific lead proteins appear to control protein network topology and function. The technology may facilitate the development of diagnostics and targeted therapies.     

Classification accuracy in multiple color fluorescence imaging microscopy

BACKGROUND: The discriminatory power and imaging efficiency of different multicolor FISH (M-FISH) analysis systems are key factors in obtaining accurate and reproducible classification results. In a recent paper, Garini et al. put forth an analytical technique to quantify the discriminatory power ("S/N ratio") and imaging efficiency ('excitation efficiency') of multicolor fluorescent karyotyping systems. METHODS: A parametric model of multicolor fluorescence microscopy, based on the Beer-Lambert law, is analyzed and reduced to a simple expression for S/N ratio. Parameters for individual system configurations are then plugged into the model for comparison purposes. RESULTS: We found that several invalid assumptions, which are used to reduce the complex mathematics of the Beer-Lambert law to a simple S/N ratio, result in some completely misleading conclusions about classification accuracy. The authors omit the most significant noise source, and consider only one highly abstract and unrepresentative situation. Unwisely chosen parameters used in the examples lead to predictions that are not consistent with actual results. CONCLUSIONS: The earlier paper presents an inaccurate view of the M-FISH situation. In this short communication, we point out several inaccurate assumptions in the mathematical development of Garini et al. and the poor choices of parameters in their examples. We show results obtained with different imaging systems that indicate that reliable and comparable results are obtained if the metaphase samples are well-hybridized. We also conclude that so-called biochemical noise, not photon noise, is the primary factor that limits pixel classification accuracy, given reasonable exposure times. Copyright Wiley-Liss, Inc.     

Ultra-high resolution imaging by fluorescence photoactivation localization microscopy

Biological structures span many orders of magnitude in size, but far-field visible light microscopy suffers from limited resolution. A new method for fluorescence imaging has been developed that can obtain spatial distributions of large numbers of fluorescent molecules on length scales shorter than the classical diffraction limit. Fluorescence photoactivation localization microscopy (FPALM) analyzes thousands of single fluorophores per acquisition, localizing small numbers of them at a time, at low excitation intensity. To control the number of visible fluorophores in the field of view and ensure that optically active molecules are separated by much more than the width of the point spread function, photoactivatable fluorescent molecules are used, in this case the photoactivatable green fluorescent protein (PA-GFP). For these photoactivatable molecules, the activation rate is controlled by the activation illumination intensity; nonfluorescent inactive molecules are activated by a high-frequency (405-nm) laser and are then fluorescent when excited at a lower frequency. The fluorescence is imaged by a CCD camera, and then the molecules are either reversibly inactivated or irreversibly photobleached to remove them from the field of view. The rate of photobleaching is controlled by the intensity of the laser used to excite the fluorescence, in this case an Ar+ ion laser. Because only a small number of molecules are visible at a given time, their positions can be determined precisely; with only approximately 100 detected photons per molecule, the localization precision can be as much as 10-fold better than the resolution, depending on background levels. Heterogeneities on length scales of the order of tens of nanometers are observed by FPALM of PA-GFP on glass. FPALM images are compared with images of the same molecules by widefield fluorescence. FPALM images of PA-GFP on a terraced sapphire crystal surface were compared with atomic force microscopy and show that the full width at half-maximum of features approximately 86 +/- 4 nm is significantly better than the expected diffraction-limited optical resolution. The number of fluorescent molecules and their brightness distribution have also been determined using FPALM. This new method suggests a means to address a significant number of biological questions that had previously been limited by microscope resolution.     

Time resolved imaging microscopy. Phosphorescence and delayed fluorescence imaging.

An optical microscope capable of measuring time resolved luminescence (phosphorescence and delayed fluorescence) images has been developed. The technique employs two phase-locked mechanical choppers and a slow-scan scientific CCD camera attached to a normal fluorescence microscope. The sample is illuminated by a periodic train of light pulses and the image is recorded within a defined time interval after the end of each excitation period. The time resolution discriminates completely against light scattering, reflection, autofluorescence, and extraneous prompt fluorescence, which ordinarily decrease contrast in normal fluorescence microscopy measurements. Time resolved image microscopy produces a high contrast image and particular structures can be emphasized by displaying a new parameter, the ratio of the phosphorescence to fluorescence. Objects differing in luminescence decay rates are easily resolved. The lifetime of the long lived luminescence can be measured at each pixel of the microscope image by analyzing a series of images that differ by a variable time delay. The distribution of luminescence decay rates is displayed directly as an image. Several examples demonstrate the utility of the instrument and the complementarity it offers to conventional fluorescence microscopy.     

Multivariate chromosome analysis and complete karyotyping using dual labeling and fluorescence digital imaging microscopy

The combination of multiple dye-DNA interactions, a fluorescence digital imaging system with a scientific CCD camera, and multivariate image analysis allows the rapid karyotyping of fluorescent human metaphase chromosome spreads. Chromosomes are stained with the bisbenzimidazole dye Hoechst 33342 and chromomycin A3, a dye pair used frequently in bivariate flow analysis and sorting of metaphase chromosomes in suspension. The use of ratio functions involving the total and peak intensities of the two dyes provides increased resolution of the karyotype in the microscope, and it can be anticipated that the same approach could lead to improved performance with flow systems as well. High pass filtering with a Laplace operator yields characteristic banded images of the individual chromosomes, even with total fields that are less than 200 pixels on a side.     

Identification of a pore lining segment in gap junction hemichannels.

The ability of certain connexins to form open hemichannels has been exploited to study the pore structure of gap junction (hemi)channels. Cysteine scanning mutagenesis was applied to cx46 and to a chimeric connexin, cx32E(1)43, which both form patent hemichannels when expressed in Xenopus oocytes. The thiol reagent maleimido-butyryl-biocytin was used to probe 12 cysteine replacement mutants in the first transmembrane segment and two in the amino-terminal segment. Maleimido-butyryl-biocytin was found to inhibit channel activity with cysteines in two equivalent positions in both connexins: I33C and M34C in cx32E(1)43 and I34C and L35C in cx46. These two positions in the first transmembrane segment are thus accessible from the extracellular space and consequently appear to contribute to the pore lining. The data also suggest that the pore structure is complex and may involve more than one transmembrane segment.     

Evaluation of algorithms for ratio imaging in fluorescence microscopy

Ratio imaging in fluorescence microscopy is used in measuring parameters such as pH, pCa, cytoplasmic porosity, and the relative concentration of fluorescent analogs within single cells. The fastest method for ratio imaging is to use lookup tables on special-purpose image processors. Since lookup tables store integers in integer addresses, using a lookup table will generate rounding errors. The magnitude of the error will depend on the transformation performed and on the number of levels used in the lookup table. We examined ratio imaging by lookup table and computed the errors generated by both inversion and log subtraction methods. Both uniformly fluorescing fields and fluorescing cell images were employed to provide data for use in confirming our calculations and illustrating both the magnitude and spatial incidence of errors. It is shown that, through proper design of lookup tables, a significant reduction can be made in the errors generated in comparison with common methods available in most image processors.     

Unitary permeability of gap junction channels to second messengers measured by FRET microscopy

Gap junction channels assembled from connexin protein subunits mediate intercellular transfer of ions and metabolites. Impaired channel function is implicated in several hereditary human diseases. In particular, defective permeation of cAMP or inositol-1,4,5-trisphosphate (InsP(3)) through connexin channels is associated with peripheral neuropathies and deafness, respectively. Here we present a method to estimate the permeability of single gap junction channels to second messengers. Using HeLa cells that overexpressed wild-type human connexin 26 (HCx26wt) as a model system, we combined measurements of junctional conductance and fluorescence resonance energy transfer (FRET) emission ratio of biosensors selective for cAMP and InsP(3). The unitary permeabilities to cAMP (47 x 10(-3) +/- 15 x 10(-3) microm(3)/s) and InsP(3) (60 x 10(-3) +/- 12 x 10(-3) microm(3)/s) were similar, but substantially larger than the unitary permeability to lucifer yellow (LY; 7 +/- 3 x 10(-3) microm(3)/s), an exogenous tracer. This method permits quantification of defects of metabolic coupling and can be used to investigate interdependence of intercellular diffusion and cross-talk between diverse signaling pathways.     

Characterization of yeast strains by fluorescence lifetime imaging microscopy

The results of fluorescence lifetime imaging microscopy of selected yeast strains were presented and the fact that the lifetime distributions can be successfully used for strain characterization and differentiation was demonstrated. Four strains of industrially relevant yeast Saccharomyces were excited at 405 nm and the autofluorescence observed within 440-540 nm. Using statistical tools such as empirical cumulative distribution functions with Kolmogorov-Smirnov testing, the four studied strains were categorized into three different groups for normal sample size of 70 cells slide(-1) at a significance level of 5%. The differentiation of all of the examined strains from one another was shown to be possible by increasing the sample size to 420 cells, which is achievable by taking the lifetime data at six different positions in the slide.     

Refractive index sensing of green fluorescent proteins in living cells using fluorescence lifetime imaging microscopy

We show that fluorescence lifetime imaging microscopy (FLIM) of green fluorescent protein (GFP) molecules in cells can be used to report on the local refractive index of intracellular GFP. We expressed GFP fusion constructs of Rac2 and gp91^phox, which are both subunits of the phagocyte NADPH oxidase enzyme, in human myeloid PLB-985 cells and showed by high-resolution confocal fluorescence microscopy that GFP-Rac2 and GFP-gp91^phox are targeted to the cytosol and to membranes, respectively. Frequency-domain FLIM experiments on these PLB-985 cells resulted in average fluorescence lifetimes of 2.70 ns for cytosolic GFP-Rac2 and 2.31 ns for membrane-bound GFP-gp91^phox. By comparing these lifetimes with a calibration curve obtained by measuring GFP lifetimes in PBS/glycerol mixtures of known refractive index, we found that the local refractive indices of cytosolic GFP-Rac2 and membrane-targeted GFP-gp91^phox are ∼1.38 and ∼1.46, respectively, which is in good correspondence with reported values for the cytosol and plasma membrane measured by other techniques. The ability to measure the local refractive index of proteins in living cells by FLIM may be important in revealing intracellular spatial heterogeneities within organelles such as the plasma and phagosomal membrane.