Simultaneous protease and transglutaminase treatment for shrink resistance of wool

A bioprocess for machine washable wool, combining the advantages of both protease and transglutaminase in a simultaneous enzymatic treatment has been developed. This process reduced the felting tendency of woven wool fabrics by 9% at the expense of only 2% weight and tensile strength loss. In contrast to previously described protease-based processes for shrink resistant wool, the anti-felting properties achieved in the simultaneous enzymatic treatment produced insignificant fibre damage, confirmed also by scanning electron images of the fabrics.     

Microbial trans‐glutaminase enhances the physical and mechanical properties of depigmented wool

This study investigates the effects of enzymatic treatment with microbial trans‐glutaminase (m‐TGase) on the physical and mechanical properties of the depigmented wool yarns. Coarse pigmented wool yarns were treated with iron (II) followed by depigmentation with both oxidative and oxidative‐reductive chemicals. The depigmented wool yarns were then treated with m‐TGase to reduce the negative effects of the harsh chemicals. Diverse features of the wool yarns, including: tensile strength, elongation, color, diameter, moisture content, alkali solubility, and weight reduction, were measured before and after bleaching and enzymatic treatments. The treatment with the oxidative and reductive agents led to reduced tensile strength and elongation, and increased lightness, alkali solubility, and moisture content of the yarns. In contrast, the enzymatic treatment by m‐TGases cross‐linked the proteins of wool fibers via reaction between glutamine and lysine isodipeptide remediated the wool yarns. This improved the tensile strength and elongation and decreased the alkali solubility and moisture content. Fourier transform infrared spectroscopy (FTIR) was used to follow the chemical changes in wool fibres during depigmentation and enzymatic treatments.     

Dyeing and antimicrobial characteristics of chitosan treated wool fabrics with henna dye

Chitosan, a naturally available biopolymer which is now increasingly being used as a functional finish on textile substrates to impart antimicrobial characteristics and increase dye uptake of fabrics was applied on wool fabrics. Henna a natural dye with proven bactericidal properties was applied on wool fabrics along with chitosan to impart antimicrobial characteristics. The effect of chitosan application on the dyeing properties of wool fabrics was studied by measuring the K/S values of the treated substrates at various concentrations of chitosan and the dye. The antimicrobial properties of chitosan and natural dyes both when applied independently and collectively on fabrics were assessed. The results proved that the chitosan treated wool fabrics showed increase dye uptake of fabrics. The treated fabrics were found to be antimicrobial and the chitosan treatment enhances the antimicrobial characteristics of the dyes. Fastness properties of the applied finish to washing, rubbing and perspiration have also been discussed.     

Effects of cutinase on the enzymatic shrink-resist finishing of wool fabrics

A novel microbial cutinase from Thermobifida fusca WSH04 was applied in the pretreatment of wool fabrics followed by protease treatment, aiming at improving the wettability of the samples by hydrolyzing the outmost bound lipids in the wool surface. Cutinase pretreatment could increase the efficacy of the subsequent protease treatment by improving the wettability, dyeability, and shrink-resistance of the wool fabrics. The data obtained by the XPS method showed the changes of elemental concentration in the wool surface after cutinase pretreatment. Compared with the fabrics treated with hydrogen peroxide and protease, the combination of cutinase and protease treatments produced better results in terms of wettability and shrink-resistance with less strength loss. The anti-felting property of the fabrics treated with the enzymatic resist-shrink technique is very promising to meet the commercial standard.     

Combined use of mild oxidation and cutinase/lipase pretreatments for enzymatic processing of wool fabrics

A cutinase from Thermobifida fusca WSH04 and two lipases, L3126 and Lipex 100L, were applied to the enzymatic pretreatment of wool fabrics followed by protease treatment, aiming at hydrolyzing the outmost bound lipids on the wool surface. A mild oxidation with 2 g/L hydrogen peroxide (30%) was selectively carried out before the enzymatic treatments. The cooperative actions of mild oxidation, cutinase and lipase pretreatments during wool processing were investigated. The results showed that lipase pretreatment alone had less impact on the wettability and anti‐felting ability of wool fabrics than cutinase treatment. Combined use of cutinase and lipase pretreatments did not evidently improve the properties of the wool fabric compared with the individual cutinase pretreatment. By contrast, mild oxidation slightly enhanced the activity of cutinase toward the wool surface and promoted the subsequent proteolytic reactions. The wetting time and contact angle of the protease‐treated fabric deceased to 1.2 min and 55°, respectively; the area shrinkage decreased to 3.1%, with an acceptable strength loss from 489 to 418 N. The changes in the cuticle scales of the wool fibers, confirmed by scanning electron microscopy, further proved the cooperative actions of mild oxidation and cutinase pretreatment during enzymatic wool processing.     

Use of protease produced byBacillus sp. SJ-121 for improvement of dyeing quality in wool and silk

In this study, a microorganism-produced protease was used to improve the quality of fabrics. First, the protease-producing bacteria were isolated from soils, and one of them was selected and identified asBacillus sp. SJ-121. The optimal medium composition for its growth and protease production was determined to be as follows: glucose 1 g/L, soybean meal 0.5 g/L, soy peptone 0.5, K₂HPO₄ 0.2, MgSO₄·7H₂O 0.002, Nacl 0.002, and Na₂CO₃ g/L. Also, the optimal temperature for the production of the protease byBacillus sp. SJ-121 was about 40°C at pH 7. The wool and silk were treated with the protease fromBacillus sp. SJ-121. Follwoing the protease treatment, changes in the surface of a single yarm of the fabrics were observed by both an optical microscope and a scanning electron microscope (SEM). Changes in the K/S value of the wool and silk were measured by spectrophotometric analysis, in order to determine the amount of dye uptake in the fabrics. We also performed a tensile strength examination in order to determine the degree and nature of mechanical changes in single yarns of the wool and silk fabrics. By increasing the protease treatment time to 48h, the dyeing characteritics of the fabrics were enhanced, and the surfaces of the single yarns of the fabrics became smoother, due to the removal of soil and scale in them. However, no mechanical changes were detected in the fabrics. Therefore, we suggest that proper treatment of the protease produced byBacillus sp. can improve the quality of silk and wool.     

Utilization of acrylates emulsion terpolymer with chitosan as a finishing agent for cotton fabrics

Cotton fabrics were treated with finishing bath formulation containing emulsion lattices based on acrylate monomers, chitosan and polyethylene glycol (PEG) to provide cotton fabrics with antibacterial, UV-protection as well as improvement of dyeing properties with direct, acid and reactive dyes. The terpolymer emulsion, chitosan and PEG concentrations as well as fabric pretreatment with alkali significantly affected the performance properties, antimicrobial activity, UV-protection and dyeing behavior of treated cotton fabric. The finished fabrics were characterized in terms of FTIR, X-ray diffraction, scanning electron microscope (SEM) as well as mechanical properties such as tensile strength, elongation at break (%), abrasion resistance and air permeability. The obtained data showed that the tested fabrics have appropriate antibacterial activity with highly UV-protection properties with increasing chitosan concentration up to 3%. The mechanical properties expressed as tensile strength and abrasion resistance increased after finishing treatment. Moreover, the performance of the finished fabrics and dyeing properties with different dyes classes were greatly influenced by the action of alkali pretreatment of cotton fabrics, adding the polyethylene glycol to the finishing bath formulation as well as emulsion and chitosan concentrations.     

Durability of lignocellulosic fibers treated with vegetable oil–phenolic resin

Jute and sisal fibers were treated with an aqueous emulsion of neem oil and phenolic resin at elevated temperature for enhancing their tensile strength, hydrophobicity and resistance against biological and chemical degradations. The process was found to lead to the transesterification of cellulose chain hydroxyl groups and increased crystallinity. Treatment efficacy was evaluated by characterizing fibers by exposing them to biological and chemical degradations. The results indicate that the short-term tensile strength increased by 61–75% following treatment. After biodegradation, treated fibers were found to retain 63–70% of their initial tensile strength, while untreated fibers retained 28–32%. Treated fibers retained 52–60% of tensile strength after 90-day exposure to 3% salinity and 48–55% of tensile strength after similar exposure to pH between 3 and 10. For untreated fibers the corresponding figures were 9–13% and 10–12% respectively.     

Factors Affecting the Persistence of Staphylococcus aureus on Fabrics

The persistence of Staphylococcus aureus (Smith) on wool blanket, wool gabardine, cotton sheeting, cotton knit jersey, cotton terry cloth, and cotton wash-and-wear fabrics was studied. The fabrics were exposed to bacterial populations by three methods: direct contact, aerosol, and a lyophilized mixture of bacteria and dust having a high content of textile fibers. The contaminated fabrics were held in 35 or 78% relative humidities at 25 C. In general, the persistence time of S. aureus populations on fabrics held in 35% relative humidity was substantially longer when the fabrics were contaminated by exposure to aerosolized cultures or to dust containing bacteria than when contaminated by direct contact. In a 78% relative humidity, bacterial populations on the fabrics persisted for substantially shorter periods of time regardless of the mode of contamination or fabric type. Cotton wash-and-wear fabric (treated with a modified triazone resin) was the material on which populations of S. aureus persisted for the shortest time. This organism retained its virulence for Swiss mice after being recovered from wool gabardine swatches held 4 weeks in 35% relative humidity and 6 weeks in 78% relative humidity.     

Enzyme processing of textiles in reverse micellar solution

Scouring of cotton using pectinase enzyme, bioscouring, in reverse micellar system was studied. The effectiveness of bioscouring was evaluated by measuring weight loss of cotton, analyzing pectin and cotton wax remaining and by wetness testing. Pectinase enzyme showed excellent activity even in organic media, and the effectiveness of scouring was equivalent or better than that achieved by conventional alkaline process or bioscouring in aqueous media. Enzymatic modification of wool using protease enzyme in the same system was also studied. It has found that felting property and tensile strength of wool fabrics treated by protease in reverse micellar system were superior to those in aqueous media. Possibilities of utilization of the same system for the subsequent textile dyeing process were also investigated. It was found that cotton and polyester fabrics were dyed satisfactorily by reverse micellar system compared to conventional aqueous system.     

Effect of microbial transglutaminase on dyeing properties of natural dyes on wool fabric

The dyeing properties of three natural dyes – curcumin, gardenia yellow and lac dye – on wool fabric after treatment with microbial transglutaminase (MTGase) have been investigated. After 120 min of MTGase treatment, compared with the fabric only pretreated with chemical and protease, the colour strength of curcumin, gardenia yellow and lac dye increased from 8±0.13, 7.5±0.10 and 22±0.12 to about 12.8±0.20, 11.7±0.20 and 27.0±0.41, respectively. The values of wash fastness for dyed wool fabrics increased from 2 to 4 after MTGase treatment, but the light fastness was not obviously improved. By comparing with mordant dyeing, although the colour strength was poorer, MTGase after-treatment did not cause colour shade changes during dyeing and the wash fastness of dyed wool fabric was similar to that of the pre-mordanted samples.     

Enzyme-mediated coupling of a bi-functional phenolic compound onto wool to enhance its physical,mechanical and functional properties

Wool fibres have been modified with nordihydroguaiaretic acid (NDGA) to improve their performance at use. This water insoluble bi-functional phenolic compound has been grafted on wool through a laccase enzyme catalyzed reaction in an aqueous–ethanol mixture. The capacity of laccase to oxidise NDGA in this aqueous–organic medium has been studied electrochemically. The increase of CH₂, CH₃ and aromatic groups signal in the DRIFT spectra, together with SEM images of the enzymatically modified fabrics confirmed the covalent grafting of NDGA on wool. This one step enzymatic process for grafting of NDGA improved the physical and mechanical properties of wool fabrics such as shrink resistance, crease recovery and tensile strength. Furthermore, the NDGA imparted to the textile material strong antioxidant activity and UV protection.     

Bio‐antifelting of wool based on mild methanolic potassium hydroxide pretreatment

Covalently bound lipids cover the wool surface and make enzymatic degradation of wool scales very difficult. In this paper, methanolic potassium hydroxide (MPH) pretreatment was used prior to enzymatic treatment of wool with protease, aiming at hydrolyzing the outmost lipids on the wool surface and promoting the subsequent proteolytic reaction. The efficacy of lipid removal from the fiber surface and the properties of the protease‐treated wool were evaluated. The results indicated that mild MPH pretreatment with 0.10 mol/L MPH for 10 min improved the wettability of the wool without adverse impacts on its mechanical properties. The wetting time and area shrinkage of the wool fabric reached 0.5 s and 5.6%, respectively, and the strength loss was within the acceptable range. Pretreatment with high concentrations of MPH for longer times led to significant damage to the wool fibers and caused heavy strength loss, without improving the antifelting properties after protease treatment. Thus, the combination of mild MPH and protease treatments endowed the wool with desirable properties in contrast to the treatment with protease alone.     

Finishing of cotton fabrics with poly (N-vinyl-2-pyrrolidone) to improve their performance and antibacterial properties

Cotton fabric was thermally crosslinked with poly (N-vinyl-2-pyrrolidone) (PVP) at different conditions including temperature, time, PVP concentrations and molecular weights. Results indicated that treating the cotton fabrics with 4% aqueous solution of PVP of molecular weight 10,000 Dalton followed by drying at 85 °C for 5 min then curing at 160 °C for 3 min results in crosslinking as will as an improvement in some performance properties of that fabrics such as resiliency, tensile strength, and acid dyeability. Post-treating PVP crosslinked fabric with 5% iodine in ethanol solution for 5 h at 50 °C imparts antibacterial activity against Staphylococcus aureus and Escherichia coli. Moreover, incorporation of PVP in the easy-care finishing of cotton fabrics, as polymer additive, with N,N-dimethylol 4,5-dihydroxyethylene urea as a crosslinker enhances some of the performance properties of finished fabrics such as the nitrogen content, tensile strength and acid dyeability along with decreasing resiliency as well as whiteness index, whereas the ester crosslinking with citric acid, in presence of PVP, enhances resilience, tensile strength and whiteness indices accompanied with a reduction in the %N of the treated fabrics. Infra red spectrum of PVP crosslinked fabric as well as EDX analysis of loaded iodine on PVP crosslinked cotton fabric were investigated.     

An enzymatic strategy for site-specific immobilization of functional proteins using microbial transglutaminase

A novel strategy for site-specific immobilization of recombinant proteins was investigated using microbial transglutaminase (MTG). Alkaline phosphatase (AP) was selected as a model protein and tagged with a short peptide (MKHKGS) at the N-terminus to provide a reactive Lys residue for MTG. On the other hand, casein, a well-known substrate for MTG, was chemically attached onto a polyacrylic resin to provide reactive Gln residues for the enzymatic immobilization of the recombinant AP. As a result, we succeeded in MTG-mediated functional immobilization of the recombinant AP onto casein-coated polyacrylic resin. It was found that the immobilized AP prepared using MTG exhibited much higher specific activity than that prepared by chemical modification. Moreover, enzymatic immobilization gave an immobilized formulation with higher stability upon repeated use than that obtained by physical adsorption. Use of this ability of MTG in posttranslational protein modification will provide us with a benign, site-specific immobilization method for functional proteins.     

麻栎壳斗染料在羊毛染色中的应用

本文研究了提取自麻栎壳斗的植物染料(麻栎染料)的耐酸、碱稳定性,染浴pH值及铝、铁离子等环保型媒染剂对其染毛织物效果的影响,并且探究了其染色动力学.研究表明,麻栎染料在强酸性染浴(pH=3)中对羊毛织物直接性好,染色后毛织物得棕色,也可采用铝离子、铁离子对直接染色后的毛织物进行后媒染,以得到不同色相的毛织物,尤其是铁后...     

Chitosan contribution on wool treatments with enzyme

In a previous research work, it was observed that the application of biopolymer chitosan (CHT) on wool fabrics before the enzymatic treatment promotes an increase of the weight loss. In order to deep on the role played by CHT, several experimental conditions have been selected according to a hybrid experimental design and different parameters, such as weight loss and shrink-resist properties, have been controlled. To enhance the CHT sorption on the wool fibre surface, wool was submitted previously to a water-vapour low-temperature plasma treatment. The weight loss results reveal that the enzyme effect increases by increasing the CHT concentration applied to untreated wool. However, CHT concentration does not have any influence when wool has been previously treated with plasma. It is deduced that the surface free energy of wool fibres plays an important role on the enzyme activity. Therefore, the results obtained reveal that the main contribution of CHT on hydrophobic surface of untreated wool fibres is to confer hydrophilicity to wool. Furthermore, CHT tends to coat the wool fibres by film formation reducing apparently the fibre damage promoted by enzyme treatment and also reducing the wool shrinkage.     

Effect of post- and pre-crosslinking of cotton fabrics on the efficiency of biofinishing with cellulase enzyme

Four different types of cotton-based fabrics, namely, loom-state cotton, cotton/polyester (50/50), cotton/polyester (35/65) and grey mercerized fabrics were bioscoured and bleached. The four substrates are given enzymatic treatment using cellulase enzyme to affect bio-polishing followed by crosslinking using N,N-dimethylol 4,5-dihydroxyethylene urea (DMDHEU) to affect easy care finishing. In another series of experiments the said bioscoured–bleached substrates were similarly crosslinked followed by bio-polishing. Technical properties of the treated fabric that were monitored include: nitrogen content, loss in fabric weight, tensile strength, elongation at break, tear strength, whiteness index, surface roughness and wrinkle recovery angle. Scanning electron micrograph was also examined. Conclusions arrived at from these studies indicated that: post-crosslinking and pre-crosslinking revealed marginal differences in N%, wrinkle recovery angle and whiteness index, a point which validates the argument that cellulase enzyme could not break down the DMDHEU crosslinks within the molecular structure of cotton-containing fabrics. Meanwhile the surface roughness obtained with pre-crosslinking is a bit higher than those of post-crosslinking. Moreover, post-crosslinking caused higher losses in strength properties than pre-crosslinking. Scanning electron micrograph shows that cotton sample pre-crosslinked is almost smooth than those post-crosslinked.     

Transglutaminase‐modified wool keratin film and its potential application in tissue engineering

Transglutaminase (TGase) catalyzes the cross‐linking of many proteins and has been widely used to improve the properties of certain protein‐based materials. Keratin is considered as a promising biomaterial candidate following traditional chemical modification. In this study, the effect of TGase on the properties of a wool keratin film was investigated. The TGase‐modified film was applied to drug release and cell proliferation. Treatment with TGase (30 U/g keratin) for 18 h at 40°C increased the tensile strength of the film from 5.18 ± 0.15 MPa to 6.22 ± 0.11 MPa and decreased the elongation at break from 83.47 ± 1.79% to 72.12 ± 3.02%. The stability of the film in PBS and in artificial gastric juice was also improved. A rougher surface and a more compact cross‐section were observed by scanning electron microscopy photographs of the TGase‐treated film. SDS‐PAGE analysis confirmed that higher molecular weight proteins were formed in the TGase‐modified keratin solution and film. The results of the drug release assay using diclofenac indicated that both films with and without TGase treatment led to a high initial release in PBS, which was more constant in artificial gastric juice. The enzyme treatment led to a lower drug release rate from the film. Cell culture experiments suggested that the TGase‐mediated cross‐linked keratin film shows a good biocompatibility and that it can be used for tissue engineering applications.     

角质酶/角蛋白酶一浴法处理对羊毛性能的影响

采用T.fusca产角质酶以及Bacillus subtilis产角蛋白酶一浴法的方式处理羊毛,通过毡缩率、断裂强力、碱溶解度、上染速率、K/S值和接触角等指标考察了该处理对羊毛的改性效果,并运用XPS、氨基酸分析和SEM考察了其对羊毛结构与性质的影响。实验结果表明：经一浴法处理后,羊毛织物的毡缩率下降明显,达到机可洗要求;断裂强力下降较少,碱溶解度增加较少,上染速率提高,K/S值增加;XPS分析表明,经处理后羊毛纤维表面的元素含量变化较大;氨基酸分析表明,经处理后羊毛纤维中的胱氨酸质量分数有所降低;SEM显示,羊毛鳞片层大部分被剥除,综上可以说明角质酶/角蛋白酶的一浴法处理对羊毛具有明显的改性作用。