Hydrolytic properties of a thermostable α‐l‐arabinofuranosidase from Caldicellulosiruptor saccharolyticus

Aims: To characterize of a thermostable recombinant α‐l ‐arabinofuranosidase from Caldicellulosiruptor saccharolyticus for the hydrolysis of arabino‐oligosaccharides to l ‐arabinose. Methods and Results: A recombinant α‐l ‐arabinofuranosidase from C. saccharolyticus was purified by heat treatment and Hi‐Trap anion exchange chromatography with a specific activity of 28·2 U mg^?1. The native enzyme was a 58‐kDa octamer with a molecular mass of 460 kDa, as measured by gel filtration. The catalytic residues and consensus sequences of the glycoside hydrolase 51 family of α‐l ‐arabinofuranosidases were completely conserved in α‐l ‐arabinofuranosidase from C. saccharolyticus. The maximum enzyme activity was observed at pH 5·5 and 80°C with a half‐life of 49 h at 75°C. Among aryl‐glycoside substrates, the enzyme displayed activity only for p‐nitrophenyl‐α‐l ‐arabinofuranoside [maximum k_cat/K_m of 220 m(mol l^?1)^?1 s^?1] and p‐nitrophenyl‐α‐l ‐arabinopyranoside. This substrate specificity differs from those of other α‐l ‐arabinofuranosidases. In a 1 mmol l^?1 solution of each sugar, arabino‐oligosaccharides with 2–5 monomer units were completely hydrolysed to l ‐arabinose within 13 h in the presence of 30 U ml^?1 of enzyme at 75°C. Conclusions: The novel substrate specificity and hydrolytic properties for arabino‐oligosaccharides of α‐l ‐arabinofuranosidase from C. saccharolyticus demonstrate the potential in the commercial production of l ‐arabinose in concert with endoarabinanase and/or xylanase. Significance and Impact of the Study: The findings of this work contribute to the knowledge of hydrolytic properties for arabino‐oligosaccharides performed by thermostable α‐l ‐arabinofuranosidase.     

Pre and post cloning characterization of a β-1,4-endoglucanase from <Emphasis Type="Italic">Bacillus</Emphasis> sp.

Consistent with its precloning characterization from the cellulolytic Bacillus sp., β-1,4-endoglucanase purified from the recombinant E. coli exhibited maximum activity at 60°C and pH 7.0. It was highly specific for CMC hydrolysis, with stability up to 70°C and over a pH range of 6.0–8.0. The K _m and V _max values for CMCase activity of the enzyme were 4.1 mg/ml and 25 μmole/ml min⁻¹, respectively. The purified enzyme was a monomer of 65 kDa, as determined by SDS-PAGE. The presence of sucrose and IPTG in fermentation media increased the endoglucanase activity of the recombinant enzyme to 5.2-folds as compared with that of the actual one.     

Secretory expression of a β‐xylosidase gene from Thermomyces lanuginosus in Escherichia coli and characterization of its recombinant enzyme

Aims: To characterize a β‐xylosidase from the thermophilic fungus Thermomyces lanuginosus and to investigate its potential in saccharification of hemicellulosic xylans. Methods and Results: A gene (designated TlXyl43) encoding β‐xylosidase was cloned from T. lanuginosus CAU44 and expressed in Escherichia coli. The gene consists of a 1017‐bp open reading frame without introns. It encodes a mature protein of 338 residues with no predicted signal peptide, belonging to glycoside hydrolase (GH) family 43. Over 60% of the recombinant β‐xylosidase (TlXyl43) was secreted into the culture medium. TlXyl43 was purified 2·6‐fold to homogeneity with an estimated mass of 51·6 kDa by SDS‐PAGE. The purified enzyme exhibited optimal activity at pH 6·5 and 55°C and was stable at 50°C. It was competitively inhibited by xylose with a K_i value of 63 mmol l^?1. Conclusions: In this study, a GH family 43 β‐xylosidase gene (TlXyl43) from T. lanuginosus CAU44 was cloned and functionally expressed in E. coli, and over 60% of recombinant protein was secreted into the culture. Significance and Impact of the Study: This is the first report of the cloning and functional expression of a β‐xylosidase gene from Thermomyces species. TlXyl43 holds great potential for variety of industries.     

Substrate specificity of a recombinant d‐lyxose isomerase from Serratia proteamaculans that produces d‐lyxose and d‐mannose

Aims: Characterization of substrate specificity of a d ‐lyxose isomerase from Serratia proteamaculans and application of the enzyme in the production of d ‐lyxose and d ‐mannose. Methods and Results: The concentrations of monosaccharides were determined using a Bio‐LC system. The activity of the recombinant protein from Ser. proteamaculans was the highest for d ‐lyxose among aldoses, indicating that it is a d‐ lyxose isomerase. The native recombinant enzyme existed as a 54‐kDa dimer, and the maximal activity for d‐ lyxose isomerization was observed at pH 7·5 and 40°C in the presence of 1 mmol l^?1 Mn²⁺. The K_m values for d ‐lyxose, d ‐mannose, d ‐xylulose, and d ‐fructose were 13·3, 32·2, 3·83, and 19·4 mmol l^?1, respectively. In 2 ml of reaction volume at pH 7·5 and 35°C, d ‐lyxose was produced at 35% (w/v) from 50% (w/v) d ‐xylulose by the d‐ lyxose isomerase in 3 h, while d ‐mannose were produced at 10% (w/v) from 50% (w/v) d ‐fructose in 5 h. Conclusions: We identified the putative sugar isomerase from Ser. proteamaculans as a d ‐lyxose isomerase. The enzyme exhibited isomerization activity for aldose substrates with the C2 and C3 hydroxyl groups in the left‐hand configuration. High production rates of d‐ lyxose and d ‐mannose by the enzyme were obtained. Significance and Impact of the Study: A new d‐ lyxose isomerase was found, and this enzyme had higher activity for d ‐lyxose and d ‐mannose than previously reported enzymes. Thus, the enzyme can be applied in industrial production of d ‐lyxose and d ‐mannose.     

Comparison of the Heterologous Expression of Trichoderma reesei Endoglucanase II and Cellobiohydrolase II in the Yeasts Pichia pastoris and Yarrowia lipolytica

The sequences encoding the genes for endoglucanase II and cellobiohydrolase II from the fungus Trichoderma reesei QM9414 were successfully cloned and expressed in Yarrowia lipolytica under the control of the POX2 or TEF promoters, and using either the native or preproLip2 secretion signals. The expression level of both recombinant enzymes was compared with that obtained using Pichia pastoris, under the control of the AOX1 promoter to evaluate the utility of Y. lipolytica as a host strain for recombinant EGII and CBHII production. Extracellular endoglucanase activity was similar between TEF-preoproLip2-eglII expressed in Y. lipolytica and P. pastoris induced by 0.5 % (v/v) methanol, but when recombinant protein expression in P. pastoris was induced with 3 % (v/v) methanol, the activity was increased by about sevenfold. In contrast, the expression level of cellobiohydrolase from the TEF-preproLip2-cbhII cassette was higher in Y. lipolytica than in P. pastoris. Transformed Y. lipolytica produced up to 15 mg/l endoglucanase and 50 mg/l cellobiohydrolase, with the specific activity of both proteins being greater than their homologs produced by P. pastoris. Partial characterization of recombinant endoglucanase II and cellobiohydrolase II expressed in both yeasts revealed their optimum pH and temperature, and their pH and temperature stabilities were identical and hyperglycosylation had little effect on their enzymatic activity and properties.     

Cloning of exoinulinase gene from Penicillium janthinellum strain B01 and its high-level expression in Pichia pastoris

Aims: The aim of this study is to improve exoinulinase production by expression of a cloned exoinulinase gene inuA1 (GenBank accession no. JF961344 ) from Penicillium janthinellum strain B01 in Pichia pastoris. Methods and Results: A full‐length cDNA of exoinulinase gene (inuA1) was cloned from P. janthinellum strain B01 using RACE PCR. An open reading frame (ORF) of 2115 bp is interrupted by a single intron of 67 bp. The fragment encodes a signal peptide with 20 amino acids and a mature protein with 684 amino acids. The inuA1 was subcloned to the pPICZαC expression vector and succesfully over‐expressed in Pichia pastoris X‐33. The highest activity of exoinlinase reached 272·8 U ml^?1 in the fermentation liquid. It was c. 11‐fold of that produced by wild‐strain B01. A large amount of fructose was identified after the hydrolysis of inulin with the crude recombinant exoinulinase. The recombinant exoinulinase was purified and characterized. The molecular weight of the purified recombinant exoinulianse was 100 kDa. The mass spectrometry result indicated that the purified protein was indeed recombinant exoinulinase. The optimal pH and temperature of the purified recombinant exoinulianse were 4·5 and 50°C, respectively. Conclusions: An exoinulinase gene of P. janthinellum strain B01 was cloned, sequenced and over‐expressed successfully in P. pastoris. Significance and Impact of the Study: Only a few genes have been cloned from P. janthinellum because its molecular biology is poorly understood. In this study, we cloned and over‐expressed inuA1 gene of P. janthinellum in P. pastoris. This recombinant exoinulinase can be used to hydrolyse inulin to produce fructose and facilitate the biofuel production from inulin resources.     

Combined effects of spray‐drying conditions and postdrying storage time and temperature on Salmonella choleraesuis and Salmonella typhimurium survival when inoculated in liquid porcine plasma

The objective of this study was to determine the effectiveness of the spray‐drying process on the inactivation of Salmonella choleraesuis and Salmonella typhimurium spiked in liquid porcine plasma and to test the additive effect of immediate postdrying storage. Commercial spray‐dried porcine plasma was sterilized by irradiation and then reconstituted (1:9) with sterile water. Aliquots of reconstituted plasma were inoculated with either S. choleraesuis or S. typhimurium, subjected to spray‐drying at an inlet temperature of 200°C and an outlet temperature of either 71 or 80°C, and each spray‐drying temperature combinations were subjected to either 0, 30 or 60 s of residence time (RT) as a simulation of residence time typical of commercial dryers. Spray‐dried samples were stored at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days. Bacterial counts of each Salmonella spp., were completed for all samples. For both Salmonella spp., spray‐drying at both outlet temperatures reduced bacterial counts about 3 logs at RT 0 s, while there was about a 5·5 log reduction at RT 60 s. Storage of all dried samples at either 4·0 ± 3·0°C or 23·0 ± 0·3°C for 15 days eliminate all detectable bacterial counts of both Salmonella spp.

Significance and Impact of the Study

Safety of raw materials from animal origin like spray‐dried porcine plasma (SDPP) may be a concern for the swine industry. Spray‐drying process and postdrying storage are good inactivation steps to reduce the bacterial load of Salmonella choleraesuis and Salmonella typhimurium. For both Salmonella spp., spray‐drying at 71°C or 80°C outlet temperatures reduced bacterial counts about 3 log at residence time (RT) 0 s, while there was about a 5.5 log reduction at RT 60 s. Storage of all dried samples at either 4.0 ± 3.0°C or 23.0 ± 0.3°C for 15 days was effective for eliminating detectable bacterial counts of both Salmonella spp.     

The unique GH5 cellulase member in the extreme halotolerant fungus Aspergillus glaucus CCHA is an endoglucanase with multiple tolerance to salt,alkali and heat: prospects for straw degradation applications

In a halotolerant fungus Aspergillus glaucus CCHA, several functional proteins with stress-tolerant activity have been studied, but no secretory enzymes have been identified yet. The unique GH5 cellulase candidate from A. glaucus, an endoglucanase termed as AgCMCase, was cloned, expressed in the Pichia pastoris system and the purified enzyme was characterized. A large amount of recombinant enzyme secreted by the P. pastoris GS115 strain was purified to homogeneity. The molecular weight of the purified endoglucanase is about 55.0 kDa. The AgCMCase exhibited optimum catalytic activity at pH 5.0 and 55 °C. However, it remained relatively stable at temperatures ranging from 45 to 80 °C and pH ranging from 4.0 to 9.0. In addition, it showed higher activity at extreme NaCl concentrations from 1.0 to 4.0 M, suggesting it is an enzyme highly stable under heat, acid, alkaline and saline conditions. To evaluate the catalytic activity of AgCMCase, the hydrolysis products of rice and corn straws were successfully studied. In conclusion, the AgCMCase is a thermostable and salt-tolerant cellulase with potential for industrial application.

     

Cloning and characterization of a recombinant family 5 endoglucanase from Bacillus licheniformis strain B-41361

The gene encoding a family 5 endoglucanase, cel5A, was cloned from the moderate thermophile Bacillus licheniformis strain B-41361. The primary structure of the translated cel5A gene predicts a 49 amino acid putative secretion signal and a 485 residue endoglucanase consisting of an N-terminal family 5 catalytic domain and C-terminal family 3 cellulose binding domain. The endoglucanase portion of the gene was expressed in Escherichia coli, but soluble activity in cell lysates was due to a truncated enzyme with an apparent mass of 42 kDa, the equivalent of the predicted catalytic domain. Insoluble protein renatured from inclusion bodies was protected against truncation, yielding an active holoenzyme (rCel5A) with apparent mass of 62 kDa. The recombinant rCel5A was optimally active at 65 °C and pH 6.0, but retained only 10% activity after 1 h incubation at this temperature. At 55 °C, rCel5A had a broad pH range for activity and stability, with greater than 75% relative activity from pH 4.5–7.0, and retaining greater than 80% relativity activity across the range pH 4.5–8.0 following 1 h incubation at 55 °C. It readily hydrolyzed pNPC, carboxymethylcellulose, barley β-glucan, and lichenan, but despite binding to cellulose, had only weak activity against avicel. Hydrolysis products from soluble polysaccharides included glucose, cellobiose, cellotriose, and cellotetraose. The catalytic properties, broad pH range and thermostability of the recombinant B. licheniformis endoglucanase may prove suitable for industrial applications.     

Characterization of an ethanol‐tolerant 1,4‐β‐xylosidase produced by Pichia membranifaciens

Aims: The purification and biochemical properties of the 1,4‐β‐xylosidase of an oenological yeast were investigated. Methods and Results: An ethanol‐tolerant 1,4‐β‐xylosidase was purified from cultures of a strain of Pichia membranifaciens grown on xylan at 28°C. The enzyme was purified by sequential chromatography on DEAE cellulose and Sephadex G‐100. The relative molecular mass of the enzyme was determined to be 50 kDa by SDS‐PAGE. The activity of 1,4‐β‐xylosidase was optimum at pH 6·0 and at 35°C. The activity had a K_m of 0·48 ± 0·06 mmol l^?1 and a V_max of 7·4 ± 0·1 μmol min^?1 mg^?1 protein for p‐nitrophenyl‐β‐d ‐xylopyranoside. Conclusions: The enzyme characteristics (pH and thermal stability, low inhibition rate by glucose and ethanol tolerance) make this enzyme a good candidate to be used in enzymatic production of xylose and improvement of hemicellulose saccharification for production of bioethanol. Significance and Impact of the Study: This study may be useful for assessing the ability of the 1,4‐β‐xylosidase from P. membranifaciens to be used in the bioethanol production process.     

Identification and antibacterial characteristics of an endophytic fungus Fusarium oxysporum from Lilium lancifolium

Aims: The aim of this study is to isolate and identify an endophytic fungus with antibacterial activity from the Asian medicinal and culinary plant Lilium lancifolium and to study the characteristics of its major antibacterial fractions. Methods and Results: After strict sample sterilization, an endophytic fungus BH‐3 with great antibacterial activity against Leuconostoc mesenteroides was isolated from the bulbs of L. lancifolium and was identified as Fusarium oxysporum on the basis of internal transcribed spacer (ITS) rDNA sequence and morphological traits. After partial purification including superfiltration and gel filtration, the major antibacterial fractions were found to be the substances with the molecular mass ranging from 35 to 60 kDa, mainly 55 kDa. The partially purified antibacterial fractions were stable at thermal processes, with more than 80% of activity left at 60°C for 1 h, and even 70·75% left at 121°C for 15 min. 90·33–98·97% of activity was observed in the pH range of 4·0–7·0. But the fractions were sensitive to different proteases. Conclusions: Endophytic strain F. oxysporum BH‐3 isolated from the bulbs of L. lancifolium produced protein‐like antibacterial metabolites. The antibacterial assay against Leuc. mesenteroides indicated that the fractions were stable at thermal processes and wide pH conditions, but sensitive to proteolyses. Significance and Impact of the Study: This study provides an increasing understanding of endophytic F. oxysporum in L. lancifolium and its metabolites, which have a great potential in food industry as antibacterial agents.     

Biochemical characterization of a thermostable endomannanase/endoglucanase from Dictyoglomus turgidum

Dictyoglomus turgidum is a hyperthermophilic, anaerobic, gram-negative bacterium that shows an array of putative glycoside hydrolases (GHs) encoded by its genome, a feature that makes this microorganism very interesting for biotechnological applications. The aim of this work is the characterization of a hyperthermophilic GH5, Dtur_0671, of D. turgidum, annotated as endoglucanase and herein named DturCelB in agreement to DturCelA, which was previously characterized. The synthetic gene was expressed in Escherichia coli. The purified recombinant enzyme is active as a monomer (40 kDa) and CD structural studies showed a conserved α/β structure at different temperatures (25 and 70 °C) and high thermoresistance (Tm of 88 °C). Interestingly, the enzyme showed high endo-β-1,4-mannanase activity vs various mannans, but low endo-β-1,4 glucanase activity towards carboxymethylcellulose. The K _M and V _max of DturCelB were determined for both glucomannan and CMC: they were 4.70 mg/ml and 473.1 μmol/min mg and 1.83 mg/ml and 1.349 μmol/min mg, respectively. Its optimal activity towards temperature and pH resulted to be 70 °C and pH 5.4, respectively. Further characterization highlighted good thermal stability (~ 50% of enzymatic activity after 2 h at 70 °C) and pH stability over a broad range (> 90% of activity after 1 h in buffer, ranging pH 5–9); resistance to chemicals was also observed.

     

Gene cloning and expression of a new acidic family 7 endo-β-1,3-1,4-glucanase from the acidophilic fungus Bispora sp. MEY-1

Most reported microbial β-1,3-1,4-glucanases belong to the glycoside hydrolase family 16. Here, we report a new acidic family 7 endo-β-1,3-1,4-glucanase (Bgl7A) from the acidophilic fungus Bispora sp. MEY-1. The cDNA of Bgl7A was isolated and over-expressed in Pichia pastoris, with a yield of about 1,000 U ml^–1 in a 3.7-l fermentor. The purified recombinant Bgl7A had three activity peaks at pH 1.5, 3.5, and 5.0 (maximum), respectively, and a temperature optimum at 60°C. The enzyme was stable at pH 1.0–8.0 and highly resistant to both pepsin and trypsin. Belonging to the group of non-specific endoglucanase, Bgl7A can hydrolyze not only β-glucan and cellulose but also laminarin and oat spelt xylan. The specific activity of Bgl7A against barley β-glucan and lichenan (4,040 and 2,740 U mg^–1) was higher than toward carboxymethyl cellulose sodium (395 U mg^–1), which was different from other family 7 endo-β-glucanases.     

Contamination levels of Clostridium estertheticum spores that result in gaseous spoilage of vacuum‐packaged chilled beef and lamb meat

Aims: To determine the contamination levels of Cl. estertheticum spores that result in gaseous spoilage of vacuum‐packaged chilled meats, beef and lamb, stored at two different temperatures, ?1·5 and 2°C. Methods and Results: The study consisted of two separate trials using the same processing parameters applied to beef and lamb at two different storage temperatures and six different inoculation concentrations of Cl. estertheticum. A threshold for pack blowing of c. 1 spore per vacuum pack was seen with both beef and lamb stored at ?1·5 and 2°C. These results highlight the detrimental effect that increasing Cl. estertheticum spore inoculum concentration has on the onset of blown pack spoilage for both meat species stored at ?1·5 and 2°C. Conclusions: This study demonstrates that storage temperature is an extremely important parameter influencing the onset of blown pack spoilage and that storing meat at ?1·5°C significantly delays the onset of blown pack spoilage in comparison with storage at 2°C. Significance and Impact of study: The results of this study indicate that 1 Cl. estertheticum spore may present a risk of spoilage, and thus hygienic carcass dressing is critical to keep contamination to a minimum and maximize storage life of the vacuum‐packed chilled product.     

Antilisterial activity of lactose monolaurate in milk,drinkable yogurt and cottage cheese

Lactose monolaurate (LML) was previously found to be an antimicrobial against Listeria monocytogenes in culture medium at concentrations between 3 and 5 mg ml^?1. In this study, the microbial inhibitory activity of LML in dairy products inoculated with a 5‐strain cocktail of clinical isolates of L. monocytogenes was investigated. Addition of LML at a concentration of 5 mg ml^?1 resulted in 4·4, 4·0 and 4·2 log reductions in 0·5% fat, 1% fat and 3·25% fat milks, respectively; 4·1, 4·4, and 3·5 log reductions in nonfat, 1% fat, and 1·5% fat yogurts, respectively; and 4·0 log reductions in both nonfat and 2% fat cottage cheese. The inhibitory effect of LML was only observed at 37°C and not 5°C. Experiments suggest that both the lauric acid and the esterified lactose moiety of LML play roles in the growth inhibition.

Significance and Impact of the Study

A novel sugar ester, lactose monolaurate, inhibited the growth of a five‐strain cocktail of Listeria monocytogenes in milk, yogurt and cottage cheese. This is the first report of the use of a sugar ester to inhibit the growth of Listeria in food systems.     

Rapid quantification of viable legionellae in water and biofilm using ethidium monoazide coupled with real‐time quantitative PCR

Aims: To optimize ethidium monoazide (EMA) coupled with real‐time quantitative PCR (qPCR) and to evaluate its environmental applicability on quantifying viable legionellae in water and biofilm of cooling towers and hot water systems. Methods and Results: EMA (0·9–45·5 μg ml^?1) and propidium monoazide (PMA, 0·9 and 2·3 μg ml^?1) combined with qPCR (i.e. EMA‐qPCR and PMA‐qPCR, respectively) were applied to unheated and heated (70°C for 30 min) Legionella pneumophila to quantify viable cells, which was also simultaneously determined by BacLight Bacterial Viability kit with epifluorogenic microscopic enumeration (BacLight‐EM). The effects of nontarget microflora and sample matrix on the performance of EMA‐qPCR were also evaluated. In comparison with BacLight‐EM results, qPCR with EMA at 2·3 μg ml^?1 was determined as the optimal EMA‐qPCR assay, which performed equally well as PMA‐qPCR for unheated Leg. pneumophila but better than PMA‐qPCR for heated Leg. pneumophila (P < 0·05). Moreover, qPCR with EMA at 2·3 μg ml^?1 accurately quantified viable Leg. pneumophila, Legionella anisa and Legionella‐like amoebal pathogens 6 (LLAP 6) without interferences by heated legionellae, unheated nonlegionellae cells and cooling tower water matrix (P > 0·05). As for water and biofilm samples collected from cooling towers and hot water systems, the viable legionellae counts determined by EMA‐qPCR were mostly greater than the culturable counts by culture assay but consistently lower than the total cell counts quantified by qPCR. Conclusions: The qPCR with EMA at 2·3 μg ml^?1 may accurately quantify viable legionellae (including fastidious LLAP 6) and Leg. pneumophila pretreated with superheating and is applicable for water and biofilm samples obtained from cooling towers and hot water systems. Significance and Impact of the Study: The EMA‐qPCR assay may be useful in environmental surveillance for viable legionellae and in evaluation of superheating efficacy against legionellae.     

Characterization of a thermoactive endoglucanase isolated from a biogas plant metagenome

A metagenomic library from DNA isolated from a biogas plant was constructed and screened for thermoactive endoglucanases to gain insight into the enzymatic diversity involved in plant biomass breakdown at elevated temperatures. Two cellulase-encoding genes were identified and the corresponding proteins showed sequence similarities of 59% for Cel5A to a putative cellulase from Anaerolinea thermolimosa and 99% for Cel5B to a characterized endoglucanase isolated from a biogas plant reactor. The cellulase Cel5A consists of one catalytical domain showing sequence similarities to glycoside hydrolase family 5 and comprises 358 amino acids with a predicted molecular mass of 41.2 kDa. The gene coding for cel5A was successfully cloned and expressed in Escherichia coli C43(DE3). The recombinant protein was purified to homogeneity using affinity chromatography with a specific activity of 182 U/mg, and a yield of 74%. Enzymatic activity was detectable towards cellulose and mannan containing substrates and over a broad temperature range from 40 °C to 70 °C and a pH range from 4.0 to 7.0 with maximal activity at 55 °C and pH 5.0. Cel5A showed high thermostability at 60 °C without loss of activity after 24 h. Due to the enzymatic characteristics, Cel5A is an attractive candidate for the degradation of lignocellulosic material.

     

High-level heterologous expression of an alkaline lipase gene from <Emphasis Type="Italic">Penicillium cyclopium</Emphasis> PG37 in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

A 777-bp cDNA fragment encoding a mature alkaline lipase (LipI) from Penicillium cyclopium PG37 was amplified by RT–PCR, and inserted into the expression plasmid pPIC9 K. The recombinant plasmid, designated as pPIC9 K-lipI, was linearized with SalI and transformed into Pichia pastoris GS115 (his4, Mut⁺) by electroporation. MD plate and YPD plates containing G418 were used for screening of the multi-copy P. pastoris transformants (His⁺, Mut⁺). One transformant resistant to 4.0 mg/ml of G418, numbered as P. pastoris GSL4-7, expressing the highest recombinant LipI (rLipI) activity was chosen for optimizing expression conditions. The integration of the gene LipI into the P. pastoris GS115 genome was confirmed by PCR analysis using 5′- and 3′-AOX1 primers. SDS–PAGE and lipase activity assays demonstrated that the rLipI, a glycosylated protein with an apparent molecular weight of about 31.5 kDa, was extracellularly expressed in P. pastoris. When the P. pastoris GSL4-7 was cultured under the optimized conditions, the expressed rLipI activity was up to 407 U/ml, much higher than that (10.5 U/ml) expressed with standard protocol. The rLipI showed the highest activity at pH 10.5 and 25°C, and was stable at a broad pH range of 7.0–10.5 and at a temperature of 30°C or below.     

Cloning and expression of cellulase gene EG1 from Rhizopus stolonifer var. reflexus TP-02 in Escherichia coli

A novel gene, EG encoding enzymes involved in carboxymethyl cellulose (CMC) degradation was isolated, sequenced from the filamentous fungus Rhizopus stolonifer var. reflexus TP-02, and expressed in Escherichia coli BL21. The results showed that the gene amplified from the cDNA of the strain could be classified as the family of endoglucanase. During the fermentation process, the maximum endoglucanase activity (i.e. 0.715 IU/ml) of the recombinant bacteria was obtained at 36 h. The SDS–PAGE analysis on purified samples showed that a band with apparent molecular weight of about 40 kDa was detected after staining with Coomassie brilliant blue.     

High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications

Aims: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin‐processing sector. Methods and Results: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68·7–97·5% similarity with other Polyporale laccases. The three laccases (59·5–62·9 kDa with 7–10% carbohydrate content) had high redox potentials (0·72–0·75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75–78°C and at pH 5–7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase‐1‐hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. Conclusions: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo‐ and pH stability, catalytic efficiency towards 2,2′‐azino‐bis‐[3‐ethylthiazoline‐6‐sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. Significance and Impact of the Study: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale‐up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor‐made enzymes.