The role of initial spore adhesion in pellet and biofilm formation in Aspergillus niger

Fungi grow on a great variety of organic and inorganic materials. Colony establishment and growth on solid surfaces require adhesion of spores and hyphae to the substrate, while cell-to-cell interactions among spores and/or hyphae are a prerequisite for the development of three-dimensional mycelial structures such as pellets or biofilms. Surface adherence has been described as a two-step process, comprised of the initial attachment of ungerminated conidia followed by further adhesion of the forming germ tubes and growing hyphae. In the present study, we analyzed the contribution of adhesion of ungerminated spores to pellet and biofilm formation in Aspergillus niger. Mutants deficient in melanin biosynthesis were constructed by the deletion of the alb1 gene, encoding a polyketide synthase essential for pigment biosynthesis. Δalb1 conidia have an altered surface structure and changed physicochemical surface properties. Spore aggregation in liquid culture as well as spore surface attachment differ between the wild type and the mutant in a pH-dependent manner. In liquid culture further pellet formation is unaffected by altered spore-spore interactions, indicating that germ tube and hyphal adherence can compensate for deficiencies in the initial step of spore attachment. In contrast, under conditions promoting adhesion of Δalb1 conidia to polymer surfaces the mutant forms more stable biofilms than the wild type, suggesting that initial spore adhesion supports sessile growth.     

The physico-chemical characterization of casein-modified surfaces and their influence on the adhesion of spores from a Geobacillus species

To gain a better understanding of the factors influencing spore adhesion in dairy manufacturing plants, casein-modified glass surfaces were prepared and characterized and their effect on the adhesion kinetics of spores from a Geobacillus sp., isolated from a dairy manufacturing plant (DMP) was assessed using a flow chamber. Surfaces were produced by initially silanizing glass using (3-glycidyloxypropyl) trimethoxysilane (GPS) or (3-aminopropyl) triethoxysilane to form epoxy-functionalized (G-GPS) or amino-functionalized glass (G-NH(2)) substrata. Casein was grafted to the G-GPS directly by its primary amino groups (G-GPS-casein) or to G-NH(2) by employing glutaraldehyde as a linking agent (G-NH(2)-glutar-casein). The surfaces were characterised using streaming potential measurements, contact angle goniometry, infrared spectroscopy and scanning electron microscopy. The attachment rate of spores suspended in 0.1?M KCl at pH 6.8, was highest on the positively charged (+14 mV) G-NH(2) surface (333 spores cm(-2) s(-1)) compared to the negatively charged glass (-22 mV), G-GPS (-20 mV) or G-GPS-casein (-21 mV) surfaces (162, 17 or 6 spores cm(-2) s(-1) respectively). Whilst there was a clear decrease in attachment rate to negatively charged casein-modified surfaces compared to the positively charged amine surface, there was no clear relationship between surface hydrophobicity and spore attachment rate.     

The physico-chemical characterization of casein-modified surfaces and their influence on the adhesion of spores from a Geobacillus species

To gain a better understanding of the factors influencing spore adhesion in dairy manufacturing plants, casein-modified glass surfaces were prepared and characterized and their effect on the adhesion kinetics of spores from a Geobacillus sp., isolated from a dairy manufacturing plant (DMP) was assessed using a flow chamber. Surfaces were produced by initially silanizing glass using (3-glycidyloxypropyl) trimethoxysilane (GPS) or (3-aminopropyl) triethoxysilane to form epoxy-functionalized (G-GPS) or amino-functionalized glass (G-NH₂) substrata. Casein was grafted to the G-GPS directly by its primary amino groups (G-GPS-casein) or to G-NH₂ by employing glutaraldehyde as a linking agent (G-NH₂-glutar-casein). The surfaces were characterised using streaming potential measurements, contact angle goniometry, infrared spectroscopy and scanning electron microscopy. The attachment rate of spores suspended in 0.1 M KCl at pH 6.8, was highest on the positively charged (+14 mV) G-NH₂ surface (333 spores cm^?2 s^?1) compared to the negatively charged glass (?22 mV), G-GPS (?20 mV) or G-GPS-casein (?21 mV) surfaces (162, 17 or 6 spores cm^?2 s^?1 respectively). Whilst there was a clear decrease in attachment rate to negatively charged casein-modified surfaces compared to the positively charged amine surface, there was no clear relationship between surface hydrophobicity and spore attachment rate.     

Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions

The adhesion of Bacillus cereus spores (NCTC 2599) to hydrophobic and hydrophilic glass surfaces was studied when environmental conditions were varied. The spores were exposed in media of different polarities as well as different pH and ionic concentrations. With increasing ethanol concentrations, the polarity of the medium was decreased and the predominant force of attraction was found to be hydrophobic. The spore surface was uncharged at a pH around 3, at which value the spore was most adhesive to both hydrophobic and hydrophilic glass. This could be attributable to the absence of electrostatic repulsion. An increased ionic concentration of the bulk increased the degree of adhesion especially to the hydrophilic surfaces. This indicates the suppression of a solvation barrier at high ionic concentrations, when the polymers of the spore surface become dehydrated.     

Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions

H usmark , U. & R önner , U. 1990. Forces involved in adhesion of Bacillus cereus spores to solid surfaces under different environmental conditions. Journal of Applied Bacteriology 69 , 557–562.
The adhesion of Bacillus cereus spores (NCTC 2599) to hydrophobic and hydro-philic glass surfaces was studied when environmental conditions were varied. The spores were exposed in media of different polarities as well as different pH and ionic concentrations. With increasing ethanol concentrations, the polarity of the medium was decreased and the predominant force of attraction was found to be hydrophobic. The spore surface was uncharged at a pH around 3, at which value the spore was most adhesive to both hydrophobic and hydrophilic glass. This could be attributable to the absence of electrostatic repulsion. An increased ionic concentration of the bulk increased the degree of adhesion especially to the hydrophilic surfaces. This indicates the suppression of a solvation barrier at high ionic concentrations, when the polymers of the spore surface become dehydrated.     

The measurement of Bacillus mycoides spore adhesion using atomic force microscopy,simple counting methods,and a spinning disk technique

An atomic force microscope has been used to study the adhesion of Bacillus mycoides spores to a hydrophilic glass surface and a hydrophobic-coated glass surface. AFM images of spores attached to the hydrophobic-coated mica surface allowed the measurement of spore dimensions in an aqueous environment without desiccation. The spore exosporium was observed to be flexible and to promote the adhesion of the spore by increasing the area of spore contact with the surface. Results from counting procedures using light microscopy matched the density of spores observed on the hydrophobic-coated glass surface with AFM. However, no spores were observed on the hydrophilic glass surface with AFM, a consequence of the weaker adhesion of the spores at this surface. AFM was also used to quantify directly the interactions of B. mycoides spores at the two surfaces in an aqueous environment. The measurements used "spore probes" constructed by immobilizing a single spore at the apex of a tipless AFM cantilever. The data showed that stretching and sequential bond breaking occurred as the spores were retracted from the hydrophilic glass surface. The greatest spore adhesion was measured at the hydrophobic-coated glass surface. An attractive force on the spores was measured as the spores approached the hydrophobic-coated surface. At the hydrophilic glass surface, only repulsive forces were measured during the approach of the spores. The AFM force measurements were in qualitative agreement with the results of a hydrodynamic shear adhesion assay that used a spinning disk technique. Quantitatively, AFM measurements of adhesive force were up to 4 x 10(3) times larger than the estimates made using the spinning disk data. This is a consequence of the different types of forces applied to the spore in the different adhesion assays. AFM has provided some unique insights into the interactions of spores with surfaces. No other instrument can make such direct measurements for single microbiological cells.     

Direct Probing of the Surface Ultrastructure and Molecular Interactions of Dormant and Germinating Spores of Phanerochaete chrysosporium

Atomic force microscopy (AFM) has been used to probe, under physiological conditions, the surface ultrastructure and molecular interactions of spores of the filamentous fungus Phanerochaete chrysosporium. High-resolution images revealed that the surface of dormant spores was uniformly covered with rodlets having a periodicity of 10 +/- 1 nm, which is in agreement with earlier freeze-etching measurements. In contrast, germinating spores had a very smooth surface partially covered with rough granular structures. Force-distance curve measurements demonstrated that the changes in spore surface ultrastructure during germination are correlated with profound modifications of molecular interactions: while dormant spores showed no adhesion with the AFM probe, germinating spores exhibited strong adhesion forces, of 9 +/- 2 nN magnitude. These forces are attributed to polysaccharide binding and suggested to be responsible for spore aggregation. This study represents the first direct characterization of the surface ultrastructure and molecular interactions of living fungal spores at the nanometer scale and offers new prospects for mapping microbial cell surface properties under native conditions.     

Engineered antifouling microtopographies: mapping preferential and inhibitory microenvironments for zoospore attachment

An algorithm was developed and implemented to map the locations of attached spores of Ulva linza on patterned surfaces. Using this mapping algorithm, spore preference among regions within a pattern can be detected and quantified. Settlement maps of spores on patterned topographies from several assays showed clear preferences in spore settlement. Over 94% of the spores attached within the depressed regions on the surfaces, including a surface containing pits instead of protruding features. The spores attached primarily at the intersections of several features, with over half and up to 96% of spores settling in these regions. The highest spore densities occurred at intersections where the features were most dissimilar. In contrast, the location of attached beads on the surfaces was nearly uniform across the surface. Identification of preferential attachment locations allows for the study of localized properties that influence cell behavior and aids in the development of new surfaces to control cell–surface interactions.     

Macroalgal spore dysfunction: ocean acidification delays and weakens adhesion

Early life stages of marine organisms are predicted to be vulnerable to ocean acidification. For macroalgae, reproduction and population persistence rely on spores to settle, adhere and continue the algal life cycle, yet the effect of ocean acidification on this critical life stage has been largely overlooked. We explicitly tested the biomechanical impact of reduced pH on early spore adhesion. We developed a shear flume to examine the effect of reduced pH on spore attachment time and strength in two intertidal rhodophyte macroalgae, one calcified (Corallina vancouveriensis) and one noncalcified (Polyostea robusta). Reduced pH delayed spore attachment of both species by 40%–52% and weakened attachment strength in C. vancouveriensis, causing spores to dislodge at lower flow‐induced shear forces, but had no effect on the attachment strength of P. robusta. Results are consistent with our prediction that reduced pH disrupts proper curing and gel formation of spore adhesives (anionic polysaccharides and glycoproteins) via protonation and cation displacement, although experimental verification is needed. Our results demonstrate that ocean acidification negatively, and differentially, impacts spore adhesion in two macroalgae. If results hold in field conditions, reduced ocean pH has the potential to impact macroalgal communities via spore dysfunction, regardless of the physiological tolerance of mature thalli.     

Diversity and partial characterization of putative virulence determinants in Pasteuria penetrans, the hyperparasitic bacterium of root-knot nematodes (Meloidogyne spp.)

Antigens recognized by monoclonal antibodies (Mabs) raised to the surface of the obligate nematode hyperparasite Pasteuria penetrans were characterized. Using the attachment of spores of the bacterium to host nematodes to determine the biological variability present on the spore surface greatly underestimated the amount of surface heterogeneity present compared with estimates from immunological techniques. This heterogeneity differed not only between different individual spores from the same population but also between different spore populations. None of the Mabs completely inhibited any spore population from attaching to the nematode cuticle, suggesting that the mechanism of attachment may be more complex than previously supposed. Chemical degradation of one particular epitope recognized by monoclonal antibody PP1/117, and designated ep117, occurred after treatment with NaOH, periodate or Proteinase K, suggesting that an O-linked glycoprotein may be involved. Fibronectin, which had been found to bind to Pasteuria spores through hydrophobic interactions, also prohibited the Mab from recognizing ep117. However, SDS-PAGE of spore extracts followed by immunoblotting showed that none of the Mabs could detect this epitope and so ep117 may be conformational in nature. Thus, the conformation of any particular epitope recognized by a Mab may be important in determining to which nematode a particular spore will attach. The distribution of a particular epitope within a population of spores will in turn therefore determine its virulence on a particular nematode.     

Fungal spore attachment to substrata

A critical factor in the success of fungal growth is spore adhesion to host surfaces. Generating spores capable of rapid and firm bonding to their hosts is not only important for keeping spores from prematurely detaching from the host surface but can also serve as a trigger for spore germination and the development of infection structures. In this paper fungal spore adhesion mechanisms are reviewed as well as factors influencing spore adhesion, germination, and differentiation. This review ends with a brief discussion on the future of fungal adhesion research.     

Adhesion of bacillus spores in relation to hydrophobicity

The adhesion of spores of five different Bacillus species to solid surfaces of different hydrophobicity was evaluated. The spore surface hydrophobicity was measured using hydrophobic interaction chromatography (HIC). A large variation in hydrophobicity was found among the spores of the different species tested. The degree of adhesion of spores to the solid surfaces was consistent with the results obtained using the HIC method. The most hydrophobic spores, according to the HIC method, adhered in a much larger extent to the hydrophobic surfaces. Furthermore, spores generally adhered to a greater extent to hydrophobic and hydrophilic surfaces than did the vegetative cells.     

Hydrophobicity of Bacillus and Clostridium spores.

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.     

Hydrophobicity of Bacillus and Clostridium spores

The hydrophobicities of spores and vegetative cells of several species of the genera Bacillus and Clostridium were measured by using the bacterial adherence to hexadecane assay and hydrophobic interaction chromatography. Although spore hydrophobicity varied among species and strains, the spores of each organism were more hydrophobic than the vegetative cells. The relative hydrophobicities determined by the two methods generally agreed. Sporulation media and conditions appeared to have little effect on spore hydrophobicity. However, exposure of spore suspensions to heat treatment caused a considerable increase in spore hydrophobicity. The hydrophobic nature of Bacillus and Clostridium spores suggests that hydrophobic interactions may play a role in the adhesion of these spores to surfaces.     

Engineered antifouling microtopographies: mapping preferential and inhibitory microenvironments for zoospore attachment

An algorithm was developed and implemented to map the locations of attached spores of Ulva linza on patterned surfaces. Using this mapping algorithm, spore preference among regions within a pattern can be detected and quantified. Settlement maps of spores on patterned topographies from several assays showed clear preferences in spore settlement. Over 94% of the spores attached within the depressed regions on the surfaces, including a surface containing pits instead of protruding features. The spores attached primarily at the intersections of several features, with over half and up to 96% of spores settling in these regions. The highest spore densities occurred at intersections where the features were most dissimilar. In contrast, the location of attached beads on the surfaces was nearly uniform across the surface. Identification of preferential attachment locations allows for the study of localized properties that influence cell behavior and aids in the development of new surfaces to control cell-surface interactions.     

Effect of NaOH (caustic wash) on the viability, surface characteristics and adhesion of spores of a Geobacillus sp. isolated from a milk powder production line

Aim: To investigate the viability, surface characteristics and ability of spores of a Geobacillus sp. isolated from a milk powder production line to adhere to stainless steel surfaces before and after a caustic (NaOH) wash used in clean‐in‐place regimes. Methods and Results: Exposing sessile spores to 1% NaOH at 65°C for 30 min decreased spore viability by two orders of magnitude. The zeta potential of the caustic treated spores decreased from ?20 to ?32 mV and they became more hydrophobic. Transmission electron microscopy revealed that caustic treated spores contained breaks in their spore coat. Under flow conditions, caustic treated spores suspended in 0·1 mol l^?1 KCl were shown to attach to stainless steel in significantly greater numbers (4·6 log₁₀ CFU cm^?2) than untreated spores (3·6 log₁₀ CFU cm^?2). Conclusions: This research suggests that spores surviving a caustic wash will have a greater propensity to attach to stainless steel surfaces. Significance of Study: The practice of recycling caustic wash solutions may increase the risk of contaminating dairy processing surfaces with spores.     

Individual and coupled effects of echinoderm extracts and surface hydrophobicity on spore settlement and germination in the brown alga Hincksia irregularis

Marine substrata possess cues that influence the behavior of fouling organisms. Initial adhesion of fouling algal zoospores to surfaces is also theorized to depend primarily upon interactions between substrata and spore cell bodies and flagellar membranes. In an effort to identify cues and surface characteristics that influence spore settlement and early development, the effects of bioactive echinoderm extracts, surface charge, and surface hydrophobicity were examined individually and in tandem on zoospore settlement and germination in Hincksia irregularis. Experiments utilizing 96-well plastic culture plates confirmed that spore settlement and germination were significantly affected by surface charge and hydrophobicity as well as by echinoderm metabolites, both individually and in tandem. Spore settlement rates in the dark over 30 min were > 400% higher on hydrophobic surfaces than on positively and negatively charged surfaces. Spore germling numbers were > 300% higher on hydrophobic surfaces than on positively and negatively charged surfaces when spores were allowed to settle in the light for 30 min and the settled spores allowed to subsequently germinate for 24 h. Spore germling numbers were consistently > 25% higher on hydrophobic surfaces than on positively and negatively charged surfaces when equal numbers of spores were allowed to completely settle in the light and subsequently germinate for 24 h. H. irregularis germ tube lengths were also significantly longer on positively charged plates than on negatively charged plates. All echinoderm extracts tested had significant effects on germination and settlement at levels below those of estimated ecological concentrations. Short-term (30 min) exposure and subsequent germination experiments indicated that higher concentrations of extracts had rapid toxic effects on algal spores. Synchronous effects of echinoderm extracts and plate charge upon spore settlement varied considerably and did not show a strong dose response relationship. Long-term (24 h) exposure of spores to echinoderm extracts had dosage dependent effects on germination and spore survival. The results of this study indicate that H. irregularis spores possess the capacity for complex responses to their environment, utilizing combined cues of surface charge, surface energy and biochemistry to determine where to settle and germinate. These responses may aid spores in the detection of suitable substrata and conditions for settlement in the marine environment.     

Surface Charge Properties of and Cu(II) Adsorption by Spores of the Marine Bacillus sp. Strain SG-1

Spores of marine Bacillus sp. strain SG-1 are capable of oxidizing Mn(II) and Co(II), which results in the precipitation of Mn(III, IV) and Co(III) oxides and hydroxides on the spore surface. The spores also bind other heavy metals; however, little is known about the mechanism and capacity of this metal binding. In this study the characteristics of the spore surface and Cu(II) adsorption to this surface were investigated. The specific surface area of wet SG-1 spores was 74.7 m² per g of dry weight as measured by the methylene blue adsorption method. This surface area is 11-fold greater than the surface area of dried spores, as determined with an N₂ adsorption surface area analyzer or as calculated from the spore dimensions, suggesting that the spore surface is porous. The surface exchange capacity as measured by the proton exchange method was found to be 30.6 μmol m⁻², which is equal to a surface site density of 18.3 sites nm⁻². The SG-1 spore surface charge characteristics were obtained from acid-base titration data. The surface charge density varied with pH, and the zero point of charge was pH 4.5. The titration curves suggest that the spore surface is dominated by negatively charged sites that are largely carboxylate groups but also phosphate groups. Copper adsorption by SG-1 spores was rapid and complete within minutes. The spores exhibited a high affinity for Cu(II). The amounts of copper adsorbed increased from negligible at pH 3 to maximum levels at pH >6. Their great surface area, site density, and affinity give SG-1 spores a high capability for binding metals on their surfaces, as demonstrated by our experiments with Cu(II).     

Adhesion and development of the root rot fungus (Heterobasidion annosum) on conifer tissues: effects of spore and host surface constituents

The objective of this study was to correlate the occurrence of particular root and woody stump surface components with the ability of spores of the root rot fungus (Heterobasidion annosum) to adhere, germinate and establish on conifer tissues. With the aid of high performance liquid chromatography, several sugars (pinitol, xylitol, dulcitol, mannitol, D-glucose, mannose, fructose) were detected on both stump and fine root surfaces of Scots pine and Norway spruce. Of all the sugars observed, xylose and arabinose were poorly utilized for initiation of germ tube growth whereas spore germination was enhanced in the presence of D-glucose, mannose or fructose. Oxidation of these sugars by pretreatment of wood discs or roots with periodic acid abolished the ability of the spores to germinate. Non-sugar components such as long chain fatty acids on spores and root surfaces as detected with nuclear magnetic resonance were found to have a significant influence on adhesion and initiation of germ tube development. Removal of these aliphatic compounds from the root surface increased spore germination by 2-fold, whereas similar treatment on spores led to a 5-fold decrease in adhesiveness to root material. In vitro studies revealed that the di-ethyl ether extract from the roots had no long term adverse effect on spore germination which suggests that the fungus may possess the capability to detoxify this substance. Similarly, adhesion of spores was affected by low and freezing temperatures. The role of significant levels of mannitol and trehalose accumulated in spores and hyphae of the fungi on viability, survival and tolerance to adverse conditions such as oxidative stress, freezing and desiccation are discussed.     

Removal kinetics of Bacillus cereus spores from a stainless steel surface exposed to constant shear stress 1 ‐ experimental system

The efficiency of cleaning in place procedures in dairy industries can be greatly affected by the presence of spore‐forming bacteria, which are able to adhere strongly to surfaces and to survive disinfection procedures. Microbial adhesion has been extensively studied, but very few studies have yet reported on the hydrodynamic removal of microorganisms, due to the lack of simple, routinely performable techniques. In this paper, a methodology using a coaxial cylinder double gap viscometer is described, to study the removal kinetics of Bacillus cereus spores from a stainless steel support under hydrodynamic conditions. This method was shown to be reproducible, sensitive and easy to perform, and allowed spore hydrodynamic removal kinetics to be studied as a function of both adhesion and detachment conditions. A high ionic strength attachment medium was shown to enhance adhesion forces, provided it did not contain macromolecules. An increase in shear stress was found to be favorable to spore detachment (4 to 5 times more spores were detached at 28 Pa than at 2 Pa), but removal kinetics were not found to be significantly different for 2 and 15 Pa. Thus, the effect of shear stress on spore removal kinetics may not be linear.