Functional defect and restoration of temperature-sensitive mutants of FlhA, a subunit of the flagellar protein export apparatus

The flagellar axial component proteins are exported to the distal end of the growing flagellum for self-assembly by the flagellar type III export apparatus. FlhA is a key membrane protein of the export apparatus, and its C-terminal cytoplasmic domain (FlhA_C) is a part of an assembly platform for the three soluble export components, FliH, FliI, and FliJ, as well as export substrates and chaperone–substrate complexes. FlhA_C is composed of a flexible linker region and four compact domains (A_CD1–A_CD4). At 42 °C, a temperature-sensitive (TS) G368C mutation in FlhA_C blocks the export process after the FliH–FliI–FliJ–substrate complex binds to the assembly platform, but it remains unknown how it does so. In this study, we analyzed a TS mutant variant, FlhA_C(G368C), and its pseudorevertant variants FlhA_C(G368C/L359F), FlhA_C(G368C/G364R), FlhA_C(G368C/R370S), and FlhA_C(G368C/P550S) using far-ultraviolet circular dichroism. Whereas the denaturation of the wild-type FlhA_C occurs in a single step, FlhA_C(G368C) and its pseudorevertant variants showed thermal transitions, at least, in two steps. The first transition of FlhA_C(G368C) can further be divided into reversible and following irreversible transitions, which correspond to the denaturation of A_CD2 and A_CD1, respectively. We show the relation between the reversible transition and the TS defect in the exporting function of FlhA_C(G368C) and that the loss of function is caused by denaturation of A_CD2. We suggest that A_CD2 is directly involved in the translocation of export substrates.     

Interactions of bacterial flagellar chaperone–substrate complexes with FlhA contribute to co‐ordinating assembly of the flagellar filament

Assembly of the bacterial flagellar filament is strictly sequential; the junction proteins, FlgK and FlgL, are assembled at the distal end of the hook prior to the FliD cap, which supports assembly of as many as 30 000 FliC molecules into the filament. Export of these proteins requires assistance of flagellar chaperones: FlgN for FlgK and FlgL, FliT for FliD and FliS for FliC. The C‐terminal cytoplasmic domain of FlhA (FlhA_C), a membrane component of the export apparatus, provides a binding‐site for these chaperone–substrate complexes but it remains unknown how it co‐ordinates flagellar protein export. Here, we report that the highly conserved hydrophobic dimple of FlhA_C is involved in the export of FlgK, FlgL, FliD and FliC but not in proteins responsible for the structure and assembly of the hook, and that the binding affinity of FlhA_C for the FlgN/FlgK complex is slightly higher than that for the FliT/FliD complex and about 14‐fold higher than that for the FliS/FliC complex, leading to the proposal that the different binding affinities of FlhA_C for these chaperone/substrate complexes may confer an advantage for the efficient formation of the junction and cap structures at the tip of the hook prior to filament formation.     

Role of the C-Terminal Cytoplasmic Domain of FlhA in Bacterial Flagellar Type III Protein Export

For construction of the bacterial flagellum, many of the flagellar proteins are exported into the central channel of the flagellar structure by the flagellar type III protein export apparatus. FlhA and FlhB, which are integral membrane proteins of the export apparatus, form a docking platform for the soluble components of the export apparatus, FliH, FliI, and FliJ. The C-terminal cytoplasmic domain of FlhA (FlhA_C) is required for protein export, but it is not clear how it works. Here, we analyzed a temperature-sensitive Salmonella enterica mutant, the flhA(G368C) mutant, which has a mutation in the sequence encoding FlhA_C. The G368C mutation did not eliminate the interactions with FliH, FliI, FliJ, and the C-terminal cytoplasmic domain of FlhB, suggesting that the mutation blocks the export process after the FliH-FliI-FliJ-export substrate complex binds to the FlhA-FlhB platform. Limited proteolysis showed that FlhA_C consists of at least three subdomains, a flexible linker, FlhA_CN, and FlhA_CC, and that FlhA_CN becomes sensitive to proteolysis by the G368C mutation. Intragenic suppressor mutations were identified in these subdomains and restored flagellar protein export to a considerable degree. However, none of these suppressor mutations suppressed the protease sensitivity. We suggest that FlhA_C not only forms part of the docking platform for the FliH-FliI-FliJ-export substrate complex but also is directly involved in the translocation of the export substrate into the central channel of the growing flagellar structure.The bacterial flagellum, which is responsible for motility, is a supramolecular complex of about 30 different proteins, and it consists of at least three substructures: the basal body, the hook, and the filament. Flagellar assembly begins with the basal body, followed by the hook and finally the filament. Many of the flagellar component proteins are translocated into the central channel of the growing flagellar structure and then to the distal end of the structure for self-assembly by the flagellar type III protein export apparatus (11, 16, 22). This export apparatus consists of six integral membrane proteins, FlhA, FlhB, FliO, FliP, FliQ, and FliR, and three soluble proteins, FliH, FliI, and FliJ (18, 21). These protein components show significant sequence and functional similarities to those of the type III secretion systems of pathogenic bacteria, which directly inject virulence factors into their host cells (11, 16).FliI is an ATPase (4) and forms an FliH₂-FliI complex with its regulator, FliH, in the cytoplasm (20). FliI self-assembles into a homo-hexamer and hence exhibits full ATPase activity (1, 8, 17). FliH and FliI, together with FliJ and the export substrate, bind to the export core complex, which is composed of the six integral membrane proteins, to recruit export substrates from the cytoplasm to the core complex (14) and facilitate the initial entry of export substrates into the export gate (23). FliJ not only prevents premature aggregation of export substrates in the cytoplasm (13) but also plays an important role in the escort mechanism for cycling export chaperones during flagellar assembly (3). The export core complex is believed to be located in the central pore of the basal body MS ring (11, 16, 22). In fact, it has been found that FlhA, FliP, and FliR are associated with the MS ring (5, 9). The FliR-FlhB fusion protein is partially functional, suggesting that FliR and FlhB interact with each other within the MS ring (29). The export core complex utilizes a proton motive force across the cytoplasmic membrane as the energy source to drive the successive unfolding of export substrates and their translocation into the central channel of the growing flagellum (23, 27). Here we refer to the export core complex as the “export gate,” as we have previously (8, 16, 23, 24).FlhA is a 692-amino-acid protein consisting of two regions: a hydrophobic N-terminal transmembrane region with eight predicted α-helical transmembrane spans (FlhA_TM) and a hydrophilic C-terminal cytoplasmic region (FlhA_C) (12, 15). FlhA_TM is responsible for the association with the MS ring (9). FlhA_C interacts with FliH, FliI, FliJ, and the C-terminal cytoplasmic domain of FlhB (6, 12, 21, 24) and plays a role in the initial export process with these proteins (28). It has been shown that the V404M mutation in FlhA_C increases not only the probability of FliI binding to the export gate in the absence of FliH (14) but also the efficiency of substrate translocation through the export gate in the absence of FliH and FliI (23). Recently, it has been shown that FlhA_C is also required for substrate recognition (7). These observations suggest that an interaction between FlhA_C and FliI is coupled with substrate entry, although it is not clear how.In order to understand the mechanism of substrate entry into the export gate, we characterized a temperature-sensitive Salmonella enterica mutant, the flhA(G368C) mutant, whose mutation blocks the flagellar protein export process at 42°C (28). We show here that this mutation severely inhibits translocation of flagellar proteins through the export gate after the FliH-FliI-FliJ complex binds to the FlhA-FlhB platform of the gate and that the impaired ability of the flhA(G368C) mutant to export flagellar proteins is restored almost to wild-type levels by intragenic second-site mutations that may alter the interactions between subdomains of FlhA_C for possible rearrangement for the export function.     

Weak Interactions between Salmonella enterica FlhB and Other Flagellar Export Apparatus Proteins Govern Type III Secretion Dynamics

The bacterial flagellum contains its own type III secretion apparatus that coordinates protein export with assembly at the distal end. While many interactions among export apparatus proteins have been reported, few have been examined with respect to the differential affinities and dynamic relationships that must govern the mechanism of export. FlhB, an integral membrane protein, plays critical roles in both export and the substrate specificity switching that occurs upon hook completion. Reported herein is the quantitative characterization of interactions between the cytoplasmic domain of FlhB (FlhB_C) and other export apparatus proteins including FliK, FlhA_C and FliI. FliK and FlhA_C bound with micromolar affinity. K_D for FliI binding in the absence of ATP was 84 nM. ATP-induced oligomerization of FliI induced kinetic changes, stimulating fast-on, fast-off binding and lowering affinity. Full length FlhB purified under solubilizing, nondenaturing conditions formed a stable dimer via its transmembrane domain and stably bound FliH. Together, the present results support the previously hypothesized central role of FlhB and elucidate the dynamics of protein-protein interactions in type III secretion.     

The role of intrinsically disordered C‐terminal region of FliK in substrate specificity switching of the bacterial flagellar type III export apparatus

The bacterial flagellar export switching machinery consists of a ruler protein, FliK, and an export switch protein, FlhB and switches substrate specificity of the flagellar type III export apparatus upon completion of hook assembly. An interaction between the C‐terminal domain of FliK (FliK_C) and the C‐terminal cytoplasmic domain of FlhB (FlhB_C) is postulated to be responsible for this switch. FliK_C has a compactly folded domain termed FliK_T3S4 (residues 268–352) and an intrinsically disordered region composed of the last 53 residues, FliK_CT (residues 353–405). Residues 301–350 of FliK_T3S4 and the last five residues of FliK_CT are critical for the switching function of FliK. FliK_CT is postulated to regulate the interaction of FliK_T3S4 with FlhB_C, but it remains unknown how. Here we report the role of FliK_CT in the export switching mechanism. Systematic deletion analyses of FliK_CT revealed that residues of 351–370 are responsible for efficient switching of substrate specificity of the export apparatus. Suppressor mutant analyses showed that FliK_CT coordinates FliK_T3S4 action with the switching. Site‐directed photo‐cross‐linking experiments showed that Val‐302 and Ile‐304 in the hydrophobic core of FliK_T3S4 bind to FlhB_C. We propose that FliK_CT may induce conformational rearrangements of FliK_T3S4 to bind to FlhB_C.     

The role of a cytoplasmic loop of MotA in load‐dependent assembly and disassembly dynamics of the MotA/B stator complex in the bacterial flagellar motor

The proton‐driven flagellar motor of Salmonella enterica can accommodate a dozen MotA/B stators in a load‐dependent manner. The C‐terminal periplasmic domain of MotB acts as a structural switch to regulate the number of active stators in the motor in response to load change. The cytoplasmic loop termed MotA_C is responsible for the interaction with a rotor protein, FliG. Here, to test if MotA_C is responsible for stator assembly around the rotor in a load‐dependent manner, we analyzed the effect of MotA_C mutations, M76V, L78W, Y83C, Y83H, I126F, R131L, A145E and E155K, on motor performance over a wide range of external load. All these MotA_C mutations reduced the maximum speed of the motor near zero load, suggesting that they reduce the rate of conformational dynamics of MotA_C coupled with proton translocation through the MotA/B proton channel. Dissociation of the stators from the rotor by decrease in the load was facilitated by the M76V, Y83H and A145E mutations compared to the wild‐type motor. The E155K mutation reduced the number of active stators in the motor from 10 to 6 under extremely high load. We propose that MotA_C is responsible for load‐dependent assembly and disassembly dynamics of the MotA/B stator units.     

The NMR structure of FliK, the trigger for the switch of substrate specificity in the flagellar type III secretion apparatus

The flagellar cytoplasmic protein FliK controls hook elongation by two successive events: by determining hook length and by stopping the supply of hook protein. These two distinct roles are assigned to different parts of FliK: the N-terminal half (FliK_N) determines length and the C-terminal half (FliK_C) switches secretion from the hook protein to the filament protein. The interaction of FliK_C with FlhB, the switchable secretion gate, triggers the switch. By NMR spectroscopy, we demonstrated that FliK is largely unstructured and determined the structure of a compact domain in FliK_C. The compact domain, denoted the FliK_C core domain, consists of two α-helices, a β-sheet with two parallel and two antiparallel strands, and several exposed loops. Based on the functional data obtained by a series of deletion mutants of the FliK_C core domain, we constructed a model of the complex between the FliK_C core domain and FlhB_C. The model suggested that one of the FliK_C loops has a high probability of interacting with the C-terminal domain of FlhB (FlhB_C) as the FliK molecule enters the secretion gate. We suggest that the autocleaved NPTH sequence in FlhB contacts loop 2 of FliK_C to trigger the switching event. This contact is sterically prevented when NPTH is not cleaved. Thus, the structure of FliK provides insight into the mechanism by which this bifunctional protein triggers a switch in the export of substrates.     

Function of the conserved FHIPEP domain of the flagellar type III export apparatus,protein FlhA

The Type III flagellar protein export apparatus of bacteria consists of five or six membrane proteins, notably FlhA, which controls the export of other proteins and is homologous to the large family of FHIPEP export proteins. FHIPEP proteins contain a highly‐conserved cytoplasmic domain. We mutagenized the cloned Salmonella flhA gene for the 692 amino acid FlhA, changing a single, conserved amino acid in the 68‐amino acid FHIPEP region. Fifty‐two mutations at 30 positions mostly led to loss of motility and total disappearance of microscopically visible flagella, also Western blot protein/protein hybridization showed no detectable export of hook protein and flagellin. There were two exceptions: a D199A mutant strain, which produced short‐stubby flagella; and a V151L mutant strain, which did not produce flagella and excreted mainly un‐polymerized hook protein. The V151L mutant strain also exported a reduced amount of hook‐cap protein FlgD, but when grown with exogenous FlgD it produced polyhooks and polyhook‐filaments. A suppressor mutant in the cytoplasmic domain of the export apparatus membrane protein FlhB rescued export of hook‐length control protein FliK and facilitated growth of full‐length flagella. These results suggested that the FHIPEP region is part of the gate regulating substrate entry into the export apparatus pore.     

Structural characterizations of the chloroplast translocon protein Tic110

Tic110 is a major component of the chloroplast protein import translocon. Two functions with mutually exclusive structures have been proposed for Tic110: a protein‐conducting channel with six transmembrane domains and a scaffold with two N‐terminal transmembrane domains followed by a large soluble domain for binding transit peptides and other stromal translocon components. To investigate the structure of Tic110, Tic110 from Cyanidioschyzon merolae (CmTic110) was characterized. We constructed three fragments, CmTic110_A, CmTic110_B and CmTic110_C, with increasing N‐terminal truncations, to perform small‐angle X‐ray scattering (SAXS) and X‐ray crystallography analyses and Dali structural comparison. Here we report the molecular envelope of CmTic110_B and CmTic110_C determined by SAXS, and the crystal structure of CmTic110_C at 4.2 Å. Our data indicate that the C‐terminal half of CmTic110 possesses a rod‐shaped helix‐repeat structure that is too flattened and elongated to be a channel. The structure is most similar to the HEAT‐repeat motif that functions as scaffolds for protein–protein interactions.     

Crystal structure of the C‐terminal domain of the Salmonella type III secretion system export apparatus protein InvA

InvA is a prominent inner‐membrane component of the Salmonella type III secretion system (T3SS) apparatus, which is responsible for regulating virulence protein export in pathogenic bacteria. InvA is made up of an N‐terminal integral membrane domain and a C‐terminal cytoplasmic domain that is proposed to form part of a docking platform for the soluble export apparatus proteins notably the T3SS ATPase InvC. Here, we report the novel crystal structure of the C‐terminal domain of Salmonella InvA which shows a compact structure composed of four subdomains. The overall structure is unique although the first and second subdomains exhibit structural similarity to the peripheral stalk of the A/V‐type ATPase and a ring building motif found in other T3SS proteins respectively.     

Mutations in the YRB1 gene encoding yeast ran-binding-protein-1 that impair nucleocytoplasmic transport and suppress yeast mating defects

We identified two temperature-sensitive (ts) mutations in the essential gene, YRB1, which encodes the yeast homolog of Ran-binding-protein-1 (RanBP1), a known coregulator of the Ran GTPase cycle. Both mutations result in single amino acid substitutions of evolutionarily conserved residues (A91D and R127K, respectively) in the Ran-binding domain of Yrb1. The altered proteins have reduced affinity for Ran (Gsp1) in vivo. After shift to restrictive temperature, both mutants display impaired nuclear protein import and one also reduces poly(A)+ RNA export, suggesting a primary defect in nucleocytoplasmic trafficking. Consistent with this conclusion, both yrb1ts mutations display deleterious genetic interactions with mutations in many other genes involved in nucleocytoplasmic transport, including SRP1 (alpha-importin) and several beta-importin family members. These yrb1ts alleles were isolated by their ability to suppress two different types of mating-defective mutants (respectively, fus1Delta and ste5ts), indicating that reduction in nucleocytoplasmic transport enhances mating proficiency. Indeed, in both yrb1ts mutants, Ste5 (scaffold protein for the pheromone response MAPK cascade) is mislocalized to the cytosol, even in the absence of pheromone. Also, both yrb1ts mutations suppress the mating defect of a null mutation in MSN5, which encodes the receptor for pheromone-stimulated nuclear export of Ste5. Our results suggest that reimport of Ste5 into the nucleus is important in downregulating mating response.     

Recombinant expression,purification, and biophysical characterization of the transmembrane and membrane proximal domains of HIV‐1 gp41

The transmembrane subunit (gp41) of the envelope glycoprotein of HIV‐1 associates noncovalently with the surface subunit (gp120) and together they play essential roles in viral mucosal transmission and infection of target cells. The membrane proximal region (MPR) of gp41 is highly conserved and contains epitopes of broadly neutralizing antibodies. The transmembrane (TM) domain of gp41 not only anchors the envelope glycoprotein complex in the viral membrane but also dynamically affects the interactions of the MPR with the membrane. While high‐resolution X‐ray structures of some segments of the MPR were solved in the past, they represent the post‐fusion forms. Structural information on the TM domain of gp41 is scant and at low resolution. Here we describe the design, expression and purification of a protein construct that includes MPR and the transmembrane domain of gp41 (MPR‐TM_TEV‐6His), which reacts with the broadly neutralizing antibodies 2F5 and 4E10 and thereby may represent an immunologically relevant conformation mimicking a prehairpin intermediate of gp41. The expression level of MPR‐TM_TEV‐6His was improved by fusion to the C‐terminus of Mistic protein, yielding ～1 mg of pure protein per liter. The isolated MPR‐TM_TEV‐6His protein was biophysically characterized and is a monodisperse candidate for crystallization. This work will enable further investigation into the structure of MPR‐TM_TEV‐6His, which will be important for the structure‐based design of a mucosal vaccine against HIV‐1.     

Noncollagenous region of the streptococcal collagen‐like protein is a trimerization domain that supports refolding of adjacent homologous and heterologous collagenous domains

Proper folding of the (Gly‐Xaa‐Yaa)_n sequence of animal collagens requires adjacent N‐ or C‐terminal noncollagenous trimerization domains which often contain coiled‐coil or beta sheet structure. Collagen‐like proteins have been found recently in a number of bacteria, but little is known about their folding mechanism. The Scl2 collagen‐like protein from Streptococcus pyogenes has an N‐terminal globular domain, designated V_sp, adjacent to its triple‐helix domain. The V_sp domain is required for proper refolding of the Scl2 protein in vitro. Here, recombinant V_sp domain alone is shown to form trimers with a significant α‐helix content and to have a thermal stability of T_m = 45°C. Examination of a new construct shows that the V_sp domain facilitates efficient in vitro refolding only when it is located N‐terminal to the triple‐helix domain but not when C‐terminal to the triple‐helix domain. Fusion of the V_sp domain N‐terminal to a heterologous (Gly‐Xaa‐Yaa)_n sequence from Clostridium perfringens led to correct folding and refolding of this triple‐helix, which was unable to fold into a triple‐helical, soluble protein on its own. These results suggest that placement of a functional trimerization module adjacent to a heterologous Gly‐Xaa‐Yaa repeating sequence can lead to proper folding in some cases but also shows specificity in the relative location of the trimerization and triple‐helix domains. This information about their modular nature can be used in the production of novel types of bacterial collagen for biomaterial applications.     

The effect of specific proline residues on the kinetic stability of the triosephosphate isomerases of two trypanosomes

The effect of specific residues on the kinetic stability of two closely related triosephosphate isomerases (from Trypanosoma cruzi, TcTIM and Trypanosoma brucei, TbTIM) has been studied. Based on a comparison of their β‐turn occurrence, we engineered two chimerical enzymes where their super secondary β‐loop‐α motifs 2 ((βα)₂) were swapped. Differential scanning calorimetry (DSC) experiments showed that the (βα)₂ motif of TcTIM inserted into TbTIM (2Tc) increases the kinetic stability. On the other hand, the presence of the (βα)₂ motif of TbTIM inserted into TcTIM (2Tb) gave a chimerical protein difficult to purify in soluble form and with a significantly reduced kinetic stability. The comparison of the contact maps of the (βα)₂ of TbTIM and TcTIM showed differences in the contact pattern of residues 43 and 49. In TcTIM these residues are prolines, located at the N‐terminal of loop‐2 and the C‐terminal of α‐helix‐2. Twelve mutants were engineered involving residues 43 and 49 to study the effect over the unfolding activation energy barrier (E_A). A systematic analysis of DSC data showed a large decrease on the E_A of TcTIM (ΔE_A ranging from 468 to 678 kJ/mol) when the single and double proline mutations are present. The relevance of Pro43 to the kinetic stability is also revealed by mutation S43P, which increased the free energy of the transition state of TbTIM by 17.7 kJ/mol. Overall, the results indicate that protein kinetic stability can be severely affected by punctual mutations, disturbing the complex network of interactions that, in concerted action, determine protein stability. Proteins 2017; 85:571–579. © 2016 Wiley Periodicals, Inc.     

Nucleophosmin mutations in acute myeloid leukemia: A tale of protein unfolding and mislocalization

Nucleophosmin (NPM1) is an abundant, ubiquitously expressed protein mainly localized at nucleoli but continuously shuttling between nucleus and cytoplasm. NPM1 plays a role in several cellular functions, including ribosome biogenesis and export, centrosome duplication, chromatin remodeling, DNA repair, and response to stress stimuli. Much of the interest in this protein arises from its relevance in human malignancies. NPM1 is frequently overexpressed in solid tumors and is the target of several chromosomal translocations in hematologic neoplasms. Notably, NPM1 has been characterized as the most frequently mutated gene in acute myeloid leukemia (AML). Mutations alter the C‐terminal DNA‐binding domain of the protein and result in its aberrant nuclear export and stable cytosolic localization. In this review, we focus on the leukemia‐associated NPM1 C‐terminal domain and describe its structure, function, and the effect exerted by leukemic mutations. Finally, we discuss the possibility to target NPM1 for the treatment of cancer and, in particular, of AML patients with mutated NPM1 gene.     

The disulfide oxidoreductase SdbA is active in Streptococcus gordonii using a single C‐terminal cysteine of the CXXC motif

Recently, we identified a novel disulfide oxidoreductase, SdbA, in the oral bacterium Streptococcus gordonii. Disulfide oxidoreductases form disulfide bonds in nascent proteins using a CXXC catalytic motif. Typically, the N‐terminal cysteine interacts with substrates, whereas the C‐terminal cysteine is buried and only reacts with the first cysteine of the motif. In this study, we investigated the SdbA C⁸⁶P⁸⁷D⁸⁸C⁸⁹ catalytic motif. In vitro, SdbA single cysteine variants at the N or C‐terminal position (SdbA_C86P and SdbA_C89A) were active but displayed different susceptibility to oxidation, and N‐terminal cysteine was prone to sulfenylation. In S. gordonii, mutants with a single N‐terminal cysteine were inactive and formed unstable disulfide adducts with other proteins. Activity was partially restored by inactivation of pyruvate oxidase, a hydrogen peroxide generator. Presence of the C‐terminal cysteine alone (in the SdbA_C86P variant) could complement the ΔsdbA mutant and restore disulfide bond formation in recombinant and natural protein substrates. These results provide evidence that certain disulfide oxidoreductases can catalyze disulfide bond formation using a single cysteine of the CXXC motif, including the buried C‐terminal cysteine.     

Structural model of ρ1 GABAC receptor based on evolutionary analysis: Testing of predicted protein–protein interactions involved in receptor assembly and function

The homopentameric ρ1 GABA_C receptor is a ligand‐gated ion channel with a binding pocket for γ‐aminobutyric acid (GABA) at the interfaces of N‐terminal extracellular domains. We combined evolutionary analysis, structural modeling, and experimental testing to study determinants of GABA_C receptor assembly and channel gating. We estimated the posterior probability of selection pressure at amino acid residue sites measured as ω‐values and built a comparative structural model, which identified several polar residues under strong selection pressure at the subunit interfaces that may form intersubunit hydrogen bonds or salt bridges. At three selected sites (R111, T151, and E55), mutations disrupting intersubunit interactions had strong effects on receptor folding, assembly, and function. We next examined the role of a predicted intersubunit salt bridge for residue pair R158–D204. The mutant R158D, where the positively charged residue is replaced by a negatively charged aspartate, yielded a partially degraded receptor and lacked membrane surface expression. The membrane surface expression was rescued by the double mutant R158D–D204R, where positive and negative charges are switched, although the mutant receptor was inactive. The single mutants R158A, D204R, and D204A exhibited diminished activities and altered kinetic profiles with fast recovery kinetics, suggesting that R158–D204 salt bridge perhaps stabilizes the open state of the GABA_C receptor. Our results emphasize the functional importance of highly conserved polar residues at the protein–protein interfaces in GABA_C ρ1 receptors and demonstrate how the integration of computational and experimental approaches can aid discovery of functionally important interactions.     

Unmasking the skiptic task of TDP‐43

The mechanism by which mutations in TAR DNA‐binding protein 43 (TDP‐43) cause neurodegeneration remains incompletely understood. In this issue of The EMBO Journal, Fratta et al ( 2018 ) describe how a point mutation in the C‐terminal low complexity domain of TDP‐43 leads to the skipping of otherwise constitutively conserved exons. In vivo, this mutation triggers late‐onset progressive neuromuscular disturbances, as seen in amyotrophic lateral sclerosis (ALS), suggesting that TDP‐43 splicing gain‐of‐function contributes to ALS pathogenesis.     

Molecular dynamic studies on the impact of mutations on the structure,stability, and N‐terminal orientation of annexin A1: Implications for membrane aggregation

Multiple MD simulations were performed for the full‐length wild‐type A1, the full length A1 mutations S27E and S27A, as well as the N‐terminal peptide (AMVSEFLKQAWFIDNEEQEYIKTVKG S ²⁷ KGGPGSAVSPYPTFN) of wild‐type A1 and mutations S27E and S27A. The MD simulation trajectories of about 350 ns were generated and analyzed to examine the changes of core domain calcium binding affinity, core domain and N‐terminal domain structures, and N‐terminal domain orientation. Our results indicated that S27A and S27E mutations caused little changes on the calcium‐binding affinity of the core domain of A1. However, the S27A mutation made the N‐terminal domain of A1 less helical, and made the N‐terminal domain migrate faster toward the core domain; these impacts on A1 are beneficial to the membrane aggregation process. On the contrary, the S27E mutation made the N‐terminal domain of A1 more stable, and hindered the migration to the core domain; these changes on A1 are antagonistic for the membrane aggregation process. Our results using MD simulations provide an atomistic explanation for experimental observations that the S27E mutant showed a higher calcium concentration requirement and lower maximal extent of aggregation, while the wild‐type and two mutants S27E and S27A required identical calcium concentrations for liposome binding. Proteins 2014; 82:3327–3334. © 2014 Wiley Periodicals, Inc.