Bio‐analytical applications of microbial fuel cell–based biosensors for onsite water quality monitoring

Globally, sustainable provision of high‐quality safe water is a major challenge of the 21st century. Various chemical and biological monitoring analytics are presently utilized to guarantee the availability of high‐quality water. However, these techniques still face some challenges including high costs, complex design and onsite and online limitations. The recent technology of using microbial fuel cell (MFC)‐based biosensors holds outstanding potential for the rapid and real‐time monitoring of water source quality. MFCs have the advantages of simplicity in design and efficiency for onsite sensing. Even though some sensing applications of MFCs were previously studied, e.g. biochemical oxygen demand sensor, recently numerous research groups around the world have presented new practical applications of this technique, which combine multidisciplinary scientific knowledge in materials science, microbiology and electrochemistry fields. This review presents the most updated research on the utilization of MFCs as potential biosensors for monitoring water quality and considers the range of potentially toxic analytes that have so far been detected using this methodology. The advantages of MFCs over established technology are also considered as well as future work required to establish their routine use.     

Metabolically active microbial communities of yellow and grey colonizations on the walls of Altamira Cave, Spain

Aims: To determine the major components of total and metabolically active microbial communities of yellow and grey colonizations threatening the conservation of palaeolithic paintings in Altamira Cave (Spain). Methods and Results: Micro‐organisms present in yellow and grey colonizations were determined from DNA analysis with those showing metabolic activity determined from RNA analysis. Microbial community fingerprints were obtained by denaturing gradient gel electrophoresis (DGGE) and 16S rDNA libraries were constructed from PCR amplified products. Proteobacteria was the most frequent bacterial phylum. Other phyla detected from RNA‐based microbial surveys were Acidobacteria, Actinobacteria, Firmicutes, Nitrospirae and Gemmatimonadetes. The detected metabolically active micro‐organisms represented only a fraction of the total bacterial community present in the studied colonizations as compared from DGGE analysis. Conclusions: The major bacterial participants in the development of yellow and grey colonizations in Altamira Cave were determined using RNA‐based molecular techniques. Micro‐organisms showing undetectable activity represent a potential risk for the conservation of these paintings if environmental conditions experience variations. Significance and Impact of the Study: Caves with palaeolithic paintings are affected by microbial deterioration. Assessing the composition of the microbial communities colonizing these caves represents a first stage to understand and control these colonizations.     

Recent advances in molecular techniques for the detection of phylogenetic markers and functional genes in microbial communities

The detection and analysis of nucleic acids extracted from microbial communities are the ultimate ways to determine the diversity and functional capability of microbial communities in the environments. However, it remains a challenge to use molecular techniques for unequivocal determination and quantification of microbial species composition and functional activities. Considerable efforts have been made to enhance the capability of molecular techniques. Here an update of the recent developments in molecular techniques for environmental microbiology is provided.     

Application of multivariate statistical techniques in microbial ecology

Recent advances in high‐throughput methods of molecular analyses have led to an explosion of studies generating large‐scale ecological data sets. In particular, noticeable effect has been attained in the field of microbial ecology, where new experimental approaches provided in‐depth assessments of the composition, functions and dynamic changes of complex microbial communities. Because even a single high‐throughput experiment produces large amount of data, powerful statistical techniques of multivariate analysis are well suited to analyse and interpret these data sets. Many different multivariate techniques are available, and often it is not clear which method should be applied to a particular data set. In this review, we describe and compare the most widely used multivariate statistical techniques including exploratory, interpretive and discriminatory procedures. We consider several important limitations and assumptions of these methods, and we present examples of how these approaches have been utilized in recent studies to provide insight into the ecology of the microbial world. Finally, we offer suggestions for the selection of appropriate methods based on the research question and data set structure.     

分子生物学方法在微生物多样性研究中的应用

微生物多样性是生物多样性的重要组成部分。由于微生物和大生物（动、植物）相比,存在着多种显著差异,因此其多样性,保护及利用也有所不同,尤其是研究方法亟待完善,提高。近年来,分子生物学方法广泛用于微生物多样性的研究并取得了一系列研究成果。本文从四个方面加以介绍：１）微生物总ＤＮＡ制备及其遗传多样性检测方法;２）１６ＳｒＲＮＡ基因序列研究;３）核酸杂交分析技术;４）ＤＮＡ动力学的研究。今后的发展趋势是加     

Expanding the microbial monitoring toolkit: Evaluation of traditional and molecular monitoring methods

Evaluation of microbial populations in oilfield systems is critical to understand the risk of microbiologically influenced corrosion, reservoir and surface souring (hydrogen sulfide production), and biofouling. Although traditional culture based methods have dominated oilfield microbial monitoring for years, use of molecular tools is becoming more common for both field and laboratory evaluations. The implementation of these additional tools is in response to some of the disadvantages of culture-based methods such as long incubation times and underestimation of actual microbial populations. The current work provides a direct comparison of culture-based methods (serial dilution for sulfate reducing, acid producing, and general heterotrophic bacteria) with molecular methods including adenosine triphosphate (ATP) and adenosine monophosphate (AMP) quantification and quantitative polymerase chain reaction (qPCR). The results demonstrate that these technologies provide nearly identical results in untreated samples with known culturable organisms, but show some differences when used in the context of a planktonic kill study. The pros and cons of each technology were addressed with respect to their use in field monitoring, laboratory monitoring, and microbial kill studies. The authors found that none of the technologies described in this work provide an all-inclusive answer, but together they provide significant insight into the microbial population in an oilfield system. In short, the authors demonstrate that it is advantageous for oilfield stakeholders to expand their microbial monitoring toolkit with these new technologies to ensure sustainable, cost-effective operation.     

现代分子生物学技术在瘤胃微生态系统研究中的应用

瘤胃中栖息着大量的微生物,由于这些微生物组成复杂且有些细菌在体外无法培养,目前对这些微生物的了解仍然很少。现代分子生物学技术的发展为研究瘤胃微生物提供了有效的方法,利用核酸探针、基因序列分析、遗传指纹技术、全细胞杂交和实时定量PCR等技术可以对瘤胃微生物的分类及进化关系、区系结构图、重要酶的表达以及目的微生物的准确定量进行更为深入和透彻的研究。发展和利用这些技术不仅可以研究微生物之间的关系以及微生物与饲料颗粒之间时间与空间的关系,还能直接在细菌自然生长的环境中对其各种特征进行研究。     

Molecular Detection, Quantification, and Diversity Evaluation of Microalgae

This study reviews the available molecular methods and new high-throughput technologies for their practical use in the molecular detection, quantification, and diversity assessment of microalgae. Molecular methods applied to other groups of organisms can be adopted for microalgal studies because they generally detect universal biomolecules, such as nucleic acids or proteins. These methods are primarily related to species detection and discrimination among various microalgae. Among current molecular methods, some molecular tools are highly valuable for small-scale detection [e.g., single-cell polymerase chain reaction (PCR), quantitative real-time PCR (qPCR), and biosensors], whereas others are more useful for large-scale, high-throughput detection [e.g., terminal restriction length polymorphism, isothermal nucleic acid sequence-based amplification, loop-mediated isothermal amplification, microarray, and next generation sequencing (NGS) techniques]. Each molecular technique has its own strengths in detecting microalgae, but they may sometimes have limitations in terms of detection of other organisms. Among current technologies, qPCR may be considered the best method for molecular quantification of microalgae. Metagenomic microalgal diversity can easily be achieved by 454 pyrosequencing rather than by the clone library method. Current NGS, third and fourth generation technologies pave the way for the high-throughput detection and quantification of microalgal diversity, and have significant potential for future use in field monitoring.     

The growing contributions of molecular biology and immunology to protistan ecology: molecular signatures as ecological tools

Modern genetic and immunological techniques have become important tools for assessing protistan species diversity for both the identification and quantification of specific taxa in natural microbial communities. Although these methods are still gaining use among ecologists, the new approaches have already had a significant impact on our understanding of protistan diversity and biogeography. For example, genetic studies of environmental samples have uncovered many protistan phylotypes that do not match the DNA sequences of any cultured organisms, and whose morphological identities are unknown at the present time. Additionally, rapid and sensitive methods for detecting and enumerating taxa of special importance (e.g. bloom-forming algae, parasitic protists) have enabled much more detailed distributional and experimental studies than have been possible using traditional methods. Nevertheless, while the application of molecular approaches has advanced some aspects of aquatic protistan ecology, significant issues still thwart the widespread adoption of these approaches. These issues include the highly technical nature of some of the molecular methods, the reconciliation of morphology-based and sequence-based species identifications, and the species concept itself.     

变性梯度凝胶电泳(DGGE)在微生物生态学中的应用

由于从环境样品中分离和培养细菌的困难,分子生物学方法已发展用来描述和鉴定微生物群落。近年来基于DNA方法的群落分析得到了迅速的发展,如PCR扩增技术,克隆文库法,荧光原位杂交法,限制性酶切片段长度多态性法,变性和温度梯度凝胶电泳法。DGGE已广泛用于分析自然环境中细菌、蓝细菌,古菌、微微型真核生物、真核生物和病毒群落的生物多样性。这一技术能够提供群落中优势种类信息和同时分析多个样品。具有可重复和容易操作等特点,适合于调查种群的时空变化,并且可通过对切下的带进行序列分析或与特异性探针杂交分析鉴定群落成员。DGGE分析微生物群落的一般步骤如下：一是核酸的提取,二是16S rRNA,18S rRNA或功能基因如可容性甲烷加单氧酶羟化酶基因(mmoX)和氨加单氧酶a一亚单位基因(amoA)片段的扩增,三是通过DGGE分析PCR产物。DGGE使用具有化学变性剂梯度的聚丙烯酰胺凝胶,该凝胶能够有区别的解链PCR扩增产物。由PCR产生的不同的DNA片段长度相同但核苷酸序列不同。因此不同的双链DNA片段由于沿着化学梯度的不同解链行为将在凝胶的不同位置上停止迁移。DNA解链行为的不同导致一个凝胶带图案,该图案是微生物群落中主要种类的一个轮廓。DGGE使用所有生物中保守的基因片段如细菌中的16S rRNA基因片段和真菌中的18S rRNA基因片段。然而同其他分子生物学方法一样,DGGE也有缺陷,其中之一是只能分离较小的片段,使用于系统发育分析比较和探针设计的序列信息量受到了限制。在某些情况下,由于所用基因的多拷贝导致一个种类多于一条带,因此不易鉴定群落结构到种的水平。此外,该技术具有内在的如单一细菌种类16S rDNA拷贝之间的异质性问题,可导致自然群落中微生物数量的过多估计。DGGE是分析微生物群落的一种有力的工具。不过为了减少DGGE和其它技术的缺陷,建议研究者结合DGGE和其它分子及微生物学方法以便更详细的观察微生物的群落结构和功能。     

Dealing with water stress and microbial preservation

The relevance of preserving microorganisms has been well accepted for several decades. Interest is now shifting towards investigating adequate preservation methods to improve microbial survival rates and to preserve new taxa of previously considered unculturable microorganisms. In addition, a growing interest in preserving fragile microbial consortia or communities with biotechnological interest motivates the improvement of preservation methods. In the present study, we reviewed the effect of water availability in microbial diversity shift. We describe the effect of drought on microorganisms at the molecular level and their molecular responses to this life-threatening challenge focusing on the production of xeroprotectants. We also review the interspecies interactions of those drought-tolerant microorganisms with other sensitive organisms including neighbouring prokaryotes and eukaryotes such as plants, and the potential role of these microorganisms at determining the ecological composition of stressed environments. We emphasize the importance of applying the knowledge derived from the molecular mechanisms used by desiccation-tolerant microorganisms for the improvement of the preservation techniques. An overview of the current and newer techniques for preserving microorganisms and microbial communities is provided. The biotechnological interest in preserving pure cultures, microbial consortia and communities is also discussed.     

Molecular community analysis of microbial diversity

New technologies that avoid the need for either gene amplification (e.g. microarrays) or nucleic acid extraction (e.g. in situ PCR) have recently been implemented in microbial ecology. Together with new approaches for culturing microorganisms and an increased understanding of the biases of molecular methods, these techniques form the most exciting advances in this field during the past year.     

Microbial acceleration of aerobic pyrite oxidation at circumneutral pH

Pyrite (FeS₂) is the most abundant sulfide mineral on Earth and represents a significant reservoir of reduced iron and sulfur both today and in the geologic past. In modern environments, oxidative transformations of pyrite and other metal sulfides play a key role in terrestrial element partitioning with broad impacts to contaminant mobility and the formation of acid mine drainage systems. Although the role of aerobic micro‐organisms in pyrite oxidation under acidic‐pH conditions is well known, to date there is very little known about the capacity for aerobic micro‐organisms to oxidize pyrite at circumneutral pH. Here, we describe two enrichment cultures, obtained from pyrite‐bearing subsurface sediments, that were capable of sustained cell growth linked to pyrite oxidation and sulfate generation at neutral pH. The cultures were dominated by two Rhizobiales species (Bradyrhizobium sp. and Mesorhizobium sp.) and a Ralstonia species. Shotgun metagenomic sequencing and genome reconstruction indicated the presence of Fe and S oxidation pathways in these organisms, and the presence of a complete Calvin–Benson–Bassham CO₂ fixation system in the Bradyrhizobium sp. Oxidation of pyrite resulted in thin (30–50 nm) coatings of amorphous Fe(III) oxide on the pyrite surface, with no other secondary Fe or S phases detected by electron microscopy or X‐ray absorption spectroscopy. Rates of microbial pyrite oxidation were approximately one order of magnitude higher than abiotic rates. These results demonstrate the ability of aerobic microbial activity to accelerate pyrite oxidation and expand the potential contribution of micro‐organisms to continental sulfide mineral weathering around the time of the Great Oxidation Event to include neutral‐pH environments. In addition, our findings have direct implications for the geochemistry of modern sedimentary environments, including stimulation of the early stages of acid mine drainage formation and mobilization of pyrite‐associated metals.     

A decade with nucleic acid‐based microbiological methods in safety control of foods

In the last decade, nucleic acid‐based methods gradually started to replace or complement the culture‐based methods and immunochemical assays in routine laboratories involved in food control. In particular, real‐time polymerase chain reaction (PCR) was technically developed to the stage of good speed, sensitivity and reproducibility, at minimized risk of carry‐over contamination. Basic advantages provided by nucleic acid‐based methods are higher speed and added information, such as subspecies identification, information on the presence of genes important for virulence or antibiotic resistance. Nucleic acid‐based methods are attractive also to detect important foodborne pathogens for which no classical counterparts are available, namely foodborne pathogenic viruses. This review briefly summarizes currently available or developing molecular technologies that may be candidates for involvement in microbiological molecular methods in the next decade. Potential of nonamplification as well as amplification methods is discussed, including fluorescent in situ hybridization, alternative PCR chemistries, alternative amplification technologies, digital PCR and nanotechnologies.     

GeoChip 4: a functional gene‐array‐based high‐throughput environmental technology for microbial community analysis

Micro‐organisms play critical roles in many important biogeochemical processes in the Earth's biosphere. However, understanding and characterizing the functional capacity of microbial communities are still difficult due to the extremely diverse and often uncultivable nature of most micro‐organisms. In this study, we developed a new functional gene array, GeoChip 4, for analysing the functional diversity, composition, structure, metabolic potential/activity and dynamics of microbial communities. GeoChip 4 contained approximately 82 000 probes covering 141 995 coding sequences from 410 functional gene families related to microbial carbon (C), nitrogen (N), sulphur (S), and phosphorus (P) cycling, energy metabolism, antibiotic resistance, metal resistance/reduction, organic remediation, stress responses, bacteriophage and virulence. A total of 173 archaeal, 4138 bacterial, 404 eukaryotic and 252 viral strains were targeted, providing the ability to analyse targeted functional gene families of micro‐organisms included in all four domains. Experimental assessment using different amounts of DNA suggested that as little as 500 ng environmental DNA was required for good hybridization, and the signal intensities detected were well correlated with the DNA amount used. GeoChip 4 was then applied to study the effect of long‐term warming on soil microbial communities at a Central Oklahoma site, with results indicating that microbial communities respond to long‐term warming by enriching carbon degradation, nutrient cycling (nitrogen and phosphorous) and stress response gene families. To the best of our knowledge, GeoChip 4 is the most comprehensive functional gene array for microbial community analysis.     

Structural diversity of microorganisms in chemically perturbed soil assessed by molecular and cytochemical approaches

Until recently, our understanding of microbial community development in soil ecosystems exposed to different inorganic and organic pollutants has been limited to culturable microorganisms because of the techniques available. The discovery that most soil microorganisms are non-culturable but potentially viable and metabolically active accelerated the application of different culture-independent methods for structural diversity assessments of the microbial community. This review examines the results of recent studies on the impact of heavy metals and organic pollutants on the diversity of the microflora obtained with methods based on analyses of signature biomarkers such as nucleic acids and fatty acids. The application of these techniques allowed researchers to pinpoint reduction of microbial diversity in contaminated soil, and significant shifts in the community structure, leading to the dominance of only a few populations (species) and the disappearance of others, some of which were never isolated by conventional methods (e.g. an increase in Acidobacterium or a decrease in terrestrial non-thermophilic Crenarchaeota). Although the new techniques are not free from limitations, they allow the monitoring of the virtual impact of stressors on soil microorganisms and the direction of resuscitation of the microbial community during natural or induced bioremediation, especially when using combined approaches.     

核酸杂交技术在微生物生态学上的应用

由于自然界中大部分的微生物种类到目前为止仍不可培养,传统基于培养和纯种分离的技术在研究微生物生态时面临很大障碍。分子生物学的进展为诸多长期困扰微生物学研究的问题提供了解决办法。核酸杂交技术已被证实在微生物系统分类和微生物生态等领域的研究具有巨大潜力并已被广泛应用。综述核酸杂交技术的基本原理、实际应用及其主要优点和局限性,以及提高其检测灵敏度和特异性的方法,并对该技术的应用前景作了探讨。