En route to economical eco‐friendly solvent system in enhancing sustainable recovery of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) copolymer

Separation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] from bacterial cell matter is a critical step in the downstream process with respect to material quality and eco‐balance as P(3HB‐co‐4HB) is widely used for biomedical applications. Therefore, an efficient and eco‐based extraction of P(3HB‐co‐4HB) using a combination of NaOH and Lysol in digesting the non‐polymeric cell material (NPCM) digestion is developed. The NaOH and Lysol show synergistic influence on the copolymer extraction at a high purity and recovery of 97 and 98 wt% respectively. The optimized cell digestion method was found applicable to a vast batch of cells containing copolymers from various 4HB monomer compositions. At the largest extraction volume of 100 L, P(3HB‐co‐4HB) with a purity of 89 wt% was extracted with a maximum recovery of 90 wt%. The method developed has also eliminated the cell pretreatment step. The extraction method developed in this research has not only produced an economic and efficient copolymer recovery but has also retained the copolymer quality, in term of its molecular weight and thermal properties. It demonstrates a practical and promising downstream processing method in recovering the copolymer effectively from the bacterial biomass.     

Two star‐shaped tetranuclear Ru(II) complexes containing uncoordinated imidazole groups: synthesis,characterization, photophysical and pH sensing properties

Tetrapodal ligands H₄L¹ and H₄L² containing imidazole groups have been synthesized by the reaction of 1,10‐phenanthroline‐5,6‐dione with 1,2,4,5‐tetrakis[(4‐formylphenoxy)methyl]benzene and 1,2,4,5‐tetrakis[(3‐formylphenoxy)methyl]benzene, respectively, in presence of NH₄OAc. Two star‐shaped complexes [{Ru(bpy)₂}₄(μ₄‐H₄L¹)](PF₆)₈ and [{Ru(bpy)₂}₄(μ₄‐H₄L²)](PF₆)₈ (bpy = 2,2′‐bipyridine) have been prepared by refluxing Ru(bpy)₂Cl₂·2H₂O and each ligand in ethylene glycol. The deprotonated complexes [{Ru(bpy)₂}₄(μ₄‐L¹)](PF₆)₄ and [{Ru(bpy)₂}₄(μ₄‐L²)](PF₆)₄ have been obtained by the reaction of sodium methoxide with [{Ru(bpy)₂}₄(μ₄‐H₄L¹)](PF₆)₈ and [{Ru(bpy)₂}₄(μ₄‐H₄L²)](PF₆)₈, respectively, in methanol. The pH effects on the UV–vis light absorption and emission spectra of both complexes have been studied, and ground‐ and excited‐state ionization constants of both complexes have been derived. The photophysical properties of both complexes are strongly dependent on the solution pH. They act as proton‐induced off–on–off luminescent sensors through two successive deprotonation processes of imidazole groups, with a maximum on–off ratio of 8 in buffer solution at room temperature. Theoretical calculations for the highest occupied molecular orbital (HOMO) and lowest occupied molecular orbital (LOMO) orbitals of bridging ligand are also presented for plausible explanations of the fluorescence changes. Copyright © 2015 John Wiley & Sons, Ltd.     

Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Isolation and characterization of α‐(1→3)‐glucan‐degrading bacteria from the gut of Diaperis boleti feeding on Laetiporus sulphureus

Bacteria degrading α‐(1→3)‐glucan were sought in the gut of fungivorous insects feeding on fruiting bodies of a polypore fungus Laetiporus sulphureus, which are rich in this polymer. One isolate, from Diaperis boleti, was selected in an enrichment culture in the glucan‐containing medium. The bacterium was identified as Paenibacillus sp. based on the results of the ribosomal DNA analysis. The Paenibacillus showed enzyme activity of 4.97 mU/cm³ and effectively degraded fungal α‐(1→3)‐glucan, releasing nigerooligosaccharides and a trace amount of glucose. This strain is the first reported α‐(1→3)‐glucan‐degrading microorganism in the gut microbiome of insects inhabiting fruiting bodies of polypore fungi.     

Conformation of poly(γ‐glutamic acid) in aqueous solution

Local conformation and overall conformation of poly(γ‐DL‐glutamic acid) (PγDLGA) and poly(γ‐L‐glutamic acid) (PγLGA) in aqueous solution was studied as a function of degree of ionization ε by ¹H‐NMR, circular dichroism, and potentiometric titration. It was clarified that their local conformation is represented by random coil over an entire ε range and their overall conformation is represented by expanded random‐coil in a range of ε > ε^*, where ε^* is about 0.3, 0.35, 0.45, and 0.5 for added‐salt concentration of 0.02M, 0.05M, 0.1M, and 0.2M, respectively. In a range of ε < ε^*, however, ε dependence of their overall conformation is significantly differentiated from each other. PγDLGA tends to aggregate intramolecularly and/or intermolecularly with decreasing ε, but PγLGA still behaves as expanded random‐coil. It is speculated that spatial arrangement of adjacent carboxyl groups along the backbone chain essentially affects the overall conformation of PγGA in acidic media. © 2015 Wiley Periodicals, Inc. Biopolymers 105: 191–198, 2016.     

α4 phosphoprotein interacts with EDD E3 ubiquitin ligase and poly(A)‐binding protein

Mammalian α4 phosphoprotein, the homolog of yeast Tap42, is a component of the mammalian target‐of‐rapamycin (mTOR) pathway that regulates ribogenesis, the initiation of translation, and cell‐cycle progression. α4 is known to interact with the catalytic subunit of protein phosphatase 2A (PP2Ac) and to regulate PP2A activity. Using α4 as bait in yeast two‐hybrid screening of a human K562 erythroleukemia cDNA library, EDD (E3 isolated by differential display) E3 ubiquitin ligase was identified as a new protein partner of α4. EDD is the mammalian ortholog of Drosophila hyperplastic discs gene (hyd) that controls cell proliferation during development. The EDD protein contains a PABC domain that is present in poly(A)‐binding protein (PABP), suggesting that PABP may also interact with α4. PABP recruits translation factors to the poly(A)‐tails of mRNAs. In the present study, immunoprecipitation/immunoblotting (IP/IB) analyses showed a physical interaction between α4 and EDD in rat Nb2 T‐lymphoma and human MCF‐7 breast cancer cell lines. α4 also interacted with PABP in Nb2, MCF‐7 and the human Jurkat T‐leukemic and K562 myeloma cell lines. COS‐1 cells, transfected with Flag‐tagged‐pSG5‐EDD, gave a (Flag)‐EDD–α4 immunocomplex. Furthermore, deletion mutants of α4 were constructed to determine the binding site for EDD. IP/IB analysis showed that EDD bound to the C‐terminal region of α4, independent of the α4‐PP2Ac binding site. Therefore, in addition to PP2Ac, α4 interacts with EDD and PABP, suggesting its involvement in multiple steps in the mTOR pathway that leads to translation initiation and cell‐cycle progression. J. Cell. Biochem. 110: 1123–1129, 2010. Published 2010 Wiley‐Liss, Inc.     

Enantioselective liquid‐liquid extraction of 3‐chloro‐phenylglycine enantiomers using (S,S)‐DIOP as extractant

(S,S)‐DIOP, a common catalyst used in asymmetric reaction, was adopted as chiral extractant to separate 3‐chloro‐phenylglycine enantiomers in liquid‐liquid extraction. The factors affecting extraction efficiency were studied, including metal precursors, organic solvents, extraction temperature, chiral extractant concentration, and pH of aqueous phase. (S,S)‐DIOP‐Pd exhibited good ability to recognize 3‐chloro‐phenylglycine enantiomers, and the operational enantioselectivity (α) is 1.836. The highest performance factor (pf) was obtained under the condition of extraction temperature of 9.1°C, (S,S)‐DIOP‐Pd concentration of 1.7 mmol/L, and pH of aqueous phase of 7.0. In addition, the possible recognition mechanism of (S,S)‐DIOP‐Pd towards 3‐chloro‐phenylglycine enantiomers was discussed.     

Scale‐up and intensification of (S)‐1‐(2‐chlorophenyl)ethanol bioproduction: Economic evaluation of whole cell‐catalyzed reduction of o‐Chloroacetophenone

Escherichia coli cells co‐expressing genes coding for Candida tenuis xylose reductase and Candida boidinii formate dehydrogenase were used for the bioreduction of o‐chloroacetophenone with in situ coenzyme recycling. The product, (S)‐1‐(2‐chlorophenyl)ethanol, is a key chiral intermediate in the synthesis of polo‐like kinase 1 inhibitors, a new class of chemotherapeutic drugs. Production of the alcohol in multi‐gram scale requires intensification and scale‐up of the biocatalyst production, biotransformation, and downstream processing. Cell cultivation in a 6.9‐L bioreactor led to a more than tenfold increase in cell concentration compared to shaken flask cultivation. The resultant cells were used in conversions of 300 mM substrate to (S)‐1‐(2‐chlorophenyl)ethanol (e.e. >99.9%) in high yield (96%). Results obtained in a reaction volume of 500 mL were identical to biotransformations carried out in 1 mL (analytical) and 15 mL (preparative) scale. Optimization of product isolation based on hexane extraction yielded 86% isolated product. Biotransformation and extraction were accomplished in a stirred tank reactor equipped with pH and temperature control. The developed process lowered production costs by 80% and enabled (S)‐1‐(2‐chlorophenyl)ethanol production within previously defined economic boundaries. A simple and efficient way to synthesize (S)‐1‐(2‐chlorophenyl)ethanol in an isolated amount of 20 g product per reaction batch was demonstrated. Biotechnol. Bioeng. 2013; 110: 2311–2315. © 2013 Wiley Periodicals, Inc.     

Cooperative binding of 2,2′‐bipyridine into polynucleotide poly(A)–poly(U‐) in an alkaline aqueous solution

UV absorption data analysis has been used to evaluate equilibrium constants of the pH‐induced interaction of 2,2′‐Bipy with polyadenylnic‐polyuridylic acid in aqueous solution. The conditional probabilities hard model has been adopted in treatment of concentration diagrams calculated by the soft modelling‐based Multivariate Curve Resolution‐Alternating Least Squares approach. Intrinsic binding constant (lgK_g = 1.93), and the cooperativity parameter (ω = 340), were calculated as the best fit. The plot of the experimental binding constant versus 2,2′‐Bipy equilibrium concentration shows two modes of ligand with polymer interactions. The equilibrium hard model correctly reproduced the binding constant variations observed in the experiment. The results indicated that ligand binding in two steps is governed by a cooperative process, that is, the enhancement of deprotonated structure stability. It would appear that proposed calculation approach can be used in future combined hard modelling theoretical and soft modelling experimental works. © 2013 Wiley Periodicals, Inc. Biopolymers 99:621–627, 2013.     

Isolation and characterization of bacteriocin‐producing bacteria from the intestinal microbiota of elderly Irish subjects

Aims

To isolate and characterize bacteriocins produced by predominant species of lactic acid bacteria from faeces of elderly subjects.

Methods and Results

Screening over 70 000 colonies, from faecal samples collected from 266 subjects, using the indicator organisms Lactobacillus bulgaricus LMG 6901 and Listeria innocua DPC 3572, identified 55 antimicrobial‐producing bacteria. Genomic fingerprinting following ApaI digestion revealed 15 distinct strains. The antimicrobial activities associated with 13 of the 15 strains were sensitive to protease treatment. The predominant antimicrobial‐producing species were identified as Lactobacillus salivarius, Lactobacillus gasseri, Lactobacillus acidophilus, Lactobacillus crispatus and Enterococcus spp. A number of previously characterized bacteriocins, including ABP‐118 and salivaricin B (from Lact. salivarius), enterocin B (Enterococcus faecium), lactacin B (Lact. acidophilus), gassericin T and a variant of gassericin A (Lact. gasseri), were identified. Interestingly, two antimicrobial‐producing species, not generally associated with intestinally derived microorganisms were also isolated: Lactococcus lactis producing nisin Z and Streptococcus mutans producing mutacin II.

Conclusion

These data suggest that bacteriocin production by intestinal isolates against our chosen targets under the screening conditions used was not frequent (0·08%).

Significance and Impact of the Study

The results presented are important due to growing evidence indicating bacteriocin production as a potential probiotic trait by virtue of strain dominance and/or pathogen inhibition in the mammalian intestine.     

Insights into the helix‐sense inversion of poly(β‐phenethyl‐L‐aspartate) by two‐dimensional Raman correlation spectroscopy

In this study, the transition process of the helix‐sense inversion of poly(β‐phenethyl‐L‐aspartate) was investigated by Raman scattering and 2‐dimensional correlation spectroscopy. Temperature‐dependent Raman spectra were obtained during the helix‐sense inversion. The results of 2‐dimensional correlation analysis in the spectral regions of 1600‐1800 and 3200‐3400 cm^?1 showed that the intensity changes of the side‐chain ester C═O stretching bands occurred prior to those of amide A and amide I bands in the unwinding process of αR‐helix on heating. The sequential order of the intensity changes for amide A, amide I, and the side‐chain ester C═O stretching bands during the inversion process was determined. It was found that the conformation change of the side chain occurred prior to that of the main chain for the αR‐helix on heating. Thus, we concluded that the transformation of the backbone chain from right‐handed to left‐handed is triggered by the conformational change of the side chains.     

Synthesis,characterization, and biological activity of poly(arginine)‐derived cancer‐targeting peptides in HepG2 liver cancer cells

The solid‐phase synthesis, structural characterization, and biological evaluation of a small library of cancer‐targeting peptides have been determined in HepG2 hepatoblastoma cells. These peptides are based on the highly specific Pep42 motif, which has been shown to target the glucose‐regulated protein 78 receptors overexpressed and exclusively localized on the cell surface of tumors. In this study, Pep42 was designed to contain varying lengths (3–12) of poly(arginine) sequences to assess their influence on peptide structure and biology. Peptides were effectively synthesized by 9‐fluorenylmethoxycarbonyl‐based solid‐phase peptide synthesis, in which the use of a poly(ethylene glycol) resin provided good yields (14–46%) and crude purities >95% as analyzed by liquid chromatography–mass spectrometry. Peptide structure and biophysical properties were investigated using circular dichroism spectroscopy. Interestingly, peptides displayed secondary structures that were contingent on solvent and length of the poly(arginine) sequences. Peptides exhibited helical and turn conformations, while retaining significant thermal stability. Structure–activity relationship studies conducted by flow cytometry and confocal microscopy revealed that the poly(arginine) derived Pep42 sequences maintained glucose‐regulated protein 78 binding on HepG2 cells while exhibiting cell translocation activity that was contingent on the length of the poly(arginine) strand. In single dose (0.15 mM) and dose‐response (0–1.5 mM) cell viability assays, peptides were found to be nontoxic in human HepG2 liver cancer cells, illustrating their potential as safe cancer‐targeting delivery agents. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

Large‐scale synthesis of tert‐butyl (3R,5S)‐6‐chloro‐3,5‐dihydroxyhexanoate by a stereoselective carbonyl reductase with high substrate concentration and product yield

To biosynthesize the (3R,5S)‐CDHH in an industrial scale, a newly synthesized stereoselective short chain carbonyl reductase (SCR) was successfully cloned and expressed in Escherichia coli. The fermentation of recombinant E. coli harboring SCR was carried out in 500 L and 5000 L fermenters, with biomass and specific activity of 9.7 g DCW/L, 15749.95 U/g DCW, and 10.97 g DCW/L, 19210.12 U/g DCW, respectively. The recombinant SCR was successfully applied for efficient production of (3R,5S)‐CDHH. The scale‐up synthesis of (3R,5S)‐CDHH was performed in 5000 L bioreactor with 400 g/L of (S)‐CHOH at 30°C, resulting in a space‐time yield of 13.7 mM/h/g DCW, which was the highest ever reported. After isolation and purification, the yield and d.e. of (3R,5S)‐CDHH reached 97.5% and 99.5%, respectively. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:612–620, 2017     

Green synthesis of enantiopure (S)‐1‐(benzofuran‐2‐yl)ethanol by whole‐cell biocatalyst

Optically active aromatic alcohols are valuable chiral building blocks of many natural products and chiral drugs. Lactobacillus paracasei BD87E6, which was isolated from a cereal‐based fermented beverage, was shown as a biocatalyst for the bioreduction of 1‐(benzofuran‐2‐yl) ethanone to (S)‐1‐(benzofuran‐2‐yl) ethanol with highly stereoselectivity. The bioreduction conditions were optimized using L. paracasei BD87E6 to obtain high enantiomeric excess (ee) and conversion. After optimization of the bioreduction conditions, it was shown that the bioreduction of 1‐(benzofuran‐2‐yl)ethanone was performed in mild reaction conditions. The asymmetric bioreduction of the 1‐(benzofuran‐2‐yl)ethanone had reached 92% yield with ee of higher than 99.9% at 6.73 g of substrate. Our study gave the first example for enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol by a biological green method. This process is also scalable and has potential in application. In this study, a basic and novel whole‐cell mediated biocatalytic method was performed for the enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol in the aqueous medium, which empowered the synthesis of a precious chiral intermediary process to be converted into a sophisticated molecule for drug production.     

Synthesis of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/chitosan/silver nanocomposite material with enhanced antimicrobial activity

This work aims to shed light in the fabrication of poly(3‐hydroxybutyrate‐co‐44%‐4‐hydroxybutyrate)[P(3HB‐co‐44%4HB)]/chitosan‐based silver nanocomposite material using different contents of silver nanoparticle (SNP); 1–9 wt%. Two approaches were applied in the fabrication; namely solvent casting and chemical crosslinking via glutaraldehyde (GA). A detailed characterization was conducted in order to yield information regarding the nanocomposite material. X‐ray diffraction analysis exhibited the nature of the three components that exist in the nanocomposite films: P(3HB‐co‐4HB), chitosan, and SNP. In term of mechanical properties, tensile strength, and elongation at break were significantly improved up to 125% and 22%, respectively with the impregnation of the SNP. The melting temperature of the nanocomposite materials was increased whereas their thermal stability was slightly changed. Scanning electron microscopy images revealed that incorporation of 9 wt% of SNP caused agglomeration but the surface roughness of the material was significantly improved with the loading. Staphylococcus aureus and Escherichia coli were completely inhibited by the nanocomposite films with 7 and 9 wt% of SNP, respectively. On the other hand, degradation of the nanocomposite materials outweighed the degradation of the pure copolymer. These bioactive and biodegradable materials stand a good chance to serve the vast need of biomedical applications namely management and care of wound as wound dressing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1469–1479, 2014     

Photoluminescence imaging of europium (III)‐doped γ‐Al2O3 nanofiber structures

Aluminium oxide (Al₂O₃) has widely been used for catalysts, insulators, and composite materials for diverse applications. Herein, we demonstrated if γ‐Al₂O₃ was useful as a luminescence support material for europium (Eu) (III) activator ion. The hydrothermal method and post‐thermal treatment at 800°C were employed to synthesize Eu(III)‐doped γ‐Al₂O₃ nanofibre structures. Luminescence characteristics of Eu(III) ions in Al₂O₃ matrix were fully understood by taking 2D and 3D‐photoluminescence imaging profiles. Various sharp emissions between 580 to 720 nm were assigned to the ⁵D₀→⁷F_J (J = 0, 1, 2, 3, 4) transitions of Eu(III) activators. On the basis of X‐ray diffraction crystallography, Auger elemental mapping and the asymmetry ratio, Eu(III) ions were found to be well doped into the γ‐Al₂O₃ matrix at a low (1 mol%) doping level. A broad emission at 460 nm was substantially increased upon higher (2 mol%) Eu(III) doping due to defect creation. The first 3D photoluminescence imaging profiles highlight detailed understanding of emission characteristics of Eu(III) ions in Al oxide‐based phosphor materials and their potential applications.