Preparation of a composite film electrochemically deposited with chitosan and gold nanoparticles for the determination of α-1-fetoprotein

A novel amperometric immunosensor based on chitosan–gold nanoparticles (Chit–GNPs) composite film and thionine (Thi) was prepared for the determination of α-1-fetoprotein (AFP). The immunosensor was prepared by electro-depositing a Chit–GNPs composite matrix on the surface of the glass carbon electrode, then Thi was immobilized onto the Chit–GNPs film using glutaraldehyde as a cross-linker. Furthermore, the GNPs were chemisorbed onto Thi film for immobilization of α-1-fetoprotein antibody. The procedure of the immunosensor was characterized by means of cyclic voltammograms. The performance and influencing factors of the resulting immunosensor were studied in details. Under optimal conditions, the immunosensor was highly sensitive to AFP and the linear range covered from 0.40 to 200.0 ng mL⁻¹ with a detection limit of 0.24 ng mL⁻¹ at three times background noise. Moreover, the simple and controllable electro-deposition method overcame the irreproducibility for preparing Chit-based immunosensor systems and the proposed immunosensor displayed a satisfactory reproducibility and stability.     

[AuCl4]− and Fe3+/[Fe(CN)6]3− ions-derivated immunosensing interface for electrochemical immunoassay of carcinoembryonic antigen in human serum

[AuCl₄]⁻ was initially deposited by electrochemical reduction on a glassy carbon electrode (GCE) to form porous nanogold layer, then prussian blue (PB) was electrodeposited onto the as-prepared nanogold layer, and then secondary nanogold particles were fabricated again on the PB surface by electrochemical reduction for the immobilization of anti-CEA antibodies. The presence of double-layer porous gold nanoparticles enhanced the immobilized amount of biomolecules, and improved the sensitivity of the immunoassay. PB, as a good redox probe, was facile to electrochemical analysis and measurement. Under optimal conditions, the developed immunoassay exhibited dynamic range from 3.0 to 80.0 ng/mL with a detection limit of 0.9 ng/mL CEA (S/N = 3). Moreover, the selectivity, reproducibility and stability of the immunosensor were acceptable.     

Electrochemical recognition for sugars on the chitosan-poly(diallyldimethylammonium chloride)-nano-Prussian blue/nano-Au/4-mercaptophenylboronic acid modified glassy carbon electrode

A new amperometric biosensor for the detection of sugars was prepared. A glassy carbon electrode was modified with Prussian blue (PB) nanoparticles protected by chitosan (CS) and poly(diallyldimethylammonium chloride) (PDDA), and then gold nanoparticles were assembled onto the electrode followed by the assembly of 4-mercaptophenylboronic acid (MPBA) onto the surface of gold nanoparticles through a sulfur–Au bond to fabricate a self-assembled biosensor. The PB nanoparticles protected by CS and PDDA were characterized using transmission electron microscopy and UV–vis absorption spectroscopy. The characterization of the self-assembled electrode was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The pK _a values of the MPBA monolayer before and after combining with sugars were determined. The fabricated electrode exhibited excellent performances for determining d(+)-glucose, d(+)-mannose, and d(−)-fructose on the basis of the change in i _p of the Fe(CN)₆^3−/4− ion in the presence of sugars.     

Fluorescein-labeled “arch-like” DNA probes for electrochemical detection of DNA on gold nanoparticle-modified gold electrodes

In the present study, a gold nanoparticle-modified gold electrode (nanogold electrode) was used to develop a novel fluorescein electrochemical DNA biosensor based on a target-induced conformational change. The nanogold electrode was obtained by electrodepositing gold nanoparticles onto a bare gold electrode. This modification not only immobilized probe oligonucleotides, but also adsorbed fluorescein onto the surface of the gold nanoparticles to form an “arch-like” structure. This article compares the electrochemical signal changes caused by the hybridization of “arch-like” DNA on nanogold electrode and linear DNA on bare gold electrode. The results showed that the adsorption effect of nanogold can enhance the sensitivity of the sensor. The linear range of target ssDNA is from 2.0 × 10⁻⁹ M to 2.0 × 10⁻⁸ M with a correlation coefficient of 0.9956 and detection limit (3σ) of 7.10 × 10⁻¹⁰ M. Additionally, the specificity and hybridization response of this simple sensor were investigated.     

Simultaneous quantification of lopinavir and ritonavir in human plasma by high performance liquid chromatography coupled with UV detection

High performance liquid chromatography was coupled with UV detection for simultaneous quantification of lopinavir (LPV) and ritonavir (RTV) in human plasma. This assay was sensitive, accurate and simple, and only used 200 μL of plasma sample. Samples were liquid-liquid extracted, and diazepam was used as an internal standard. The chromatographic separation was achieved on a C18 reversed-phase analytic column with a mobile phase of acetonitrile-sodium dihydrogen phosphate buffer (10 mmol L⁻¹, pH 4.80) (60:40, v/v). UV detection was conducted at 205 nm and the column oven was set at 40°C. Calibration curves were constructed between 0.5–20 μg mL⁻¹ for LPV and 0.05–5 μg mL⁻¹ for RTV. The relative standard deviations were 2.16%–3.20% for LPV and 2.12%–2.60% for RTV for intra-day analysis, and 2.34%–4.04% for LPV and 0.31%–4.94% for RTV for inter-day analysis. The accuracy was within 100%±10%. The mean extraction recoveries were 79.17%, 52.26% and 91.35% for RTV, LPV and diazepam, respectively. This method was successfully applied to human plasma samples from patients orally administered a salvage regimen of lopinavir-ritonavir tablets.     

Bacterioplankton of the Gdansk Basin,Baltic Sea

The numbers, biomass, and production of bacterioplankton were determined in the Russian Sector of the Gdansk Basin (Baltic Sea) in 2007–2009. Significant spatial and temporal variations were determined. During the year, bacterial activity increased with increasing water temperature and higher availability of organic substrates. The lowest bacterial production (0.01–31.63 mg C m⁻³ day⁻¹) was observed in late winter and late autumn, while the highest (0.17–341.70 mg C m⁻³ day⁻¹) occurred in spring and summer. Since bacterial numbers and biomass were found to depend on the weather conditions and the terrigenous inflow, significant variations were observed from year to year. The highest and lowest numbers and biomass of bacterioplankton determined in summer were 0.09–1.10 × 10⁶ cells mL⁻¹ and 2–22 mg C m⁻³ for July 2007 and 1.96–11.23 × 10⁶ cells mL⁻¹ and 23–123 mg C m^–3 for July 2009. The values of these parameters were the highest along the coast and decreased towards the open sea.     

Influence of Interfacial Composition on in Vitro Digestibility of Emulsified Lipids: Potential Mechanism for Chitosan's Ability to Inhibit Fat Digestion

The objective of this study was to investigate the influence of interfacial composition and electrical charge on the in vitro digestion of emulsified fats by pancreatic lipase. An electrostatic layer-by-layer deposition technique was used to prepare corn oil-in-water emulsions (3 wt% oil) that contained droplets coated by (1) lecithin, (2) lecithin–chitosan, or (3) lecithin–chitosan–pectin. Pancreatic lipase (1.6 mg mL⁻¹) and/or bile extract (5.0 mg mL⁻¹) were added to each emulsion, and the particle charge, droplet aggregation, and free fatty acids released were measured. In the presence of bile extract, the amount of fatty acids released per unit amount of emulsion was much lower in the emulsions containing droplets coated by lecithin–chitosan (38 ± 16 μmol mL⁻¹) than those containing droplets coated by lecithin (250 ± 70 μmol mL⁻¹) or lecithin–chitosan–pectin (274 ± 80 μmol mL⁻¹). In addition, there was much more extensive droplet aggregation in the lecithin–chitosan emulsion than in the other two emulsions. We postulated that lipase activity was reduced in the lecithin–chitosan emulsion as a result of the formation of a relatively thick cationic layer around each droplet, as well as the formation of large flocs, which restricted the access of the pancreatic lipase to the lipids within the droplets. Our results also suggest that droplets initially coated by a lecithin–chitosan–pectin layer did not inhibit lipase activity, which may have been because the chitosan–pectin desorbed from the droplet surfaces thereby allowing the enzyme to reach the lipids; however, further work is needed to establish this. This information could be used to create food emulsions with low caloric level, or to optimize diets for individuals with lipid digestion problems.     

A carbon nanotube/silica sol–gel architecture for immobilization of horseradish peroxidase for electrochemical biosensor

A novel third-generation biosensor for hydrogen peroxide (H₂O₂) has been constructed based on horseradish peroxidase (HRP) immobilized by the sol–gel (SG) technology on carbon nanotube (CNT)-modified electrode. CNT has good promotion effects on the direct electron transfer between HRP and the electrode surface and the SG network provides a biocompatible microenvironment for enzyme. The immobilized HRP retained its bioelectrocatalytic activity for the reduction of hydrogen peroxide and can respond to the change of concentration of H₂O₂ rapidly. The heterogeneous electron transfer rate constant was evaluated to be 2.8 ± 0.4 s⁻¹. The amperometric response to H₂O₂ shows a linear relation in the range from 0.5 to 300 μmol l⁻¹ and a detection limit of 0.1 μmol l⁻¹ (S/N = 3). The K _M^app value of HRP immobilized on the electrode surface was found to be 1.35 mmol l⁻¹. The biosensor exhibited high sensitivity, rapid response and excellent long-term stability.     

Direct electrochemical immunoassay based on a silica nanoparticles/sol–gel composite architecture for encapsulation of immunoconjugate

A highly hydrophobic and non-toxic colloidal silica nanoparticle/polyvinyl butyral sol–gel composite membrane was prepared on a platinum wire electrode. With diphtheria-toxoid (D-Ag) as a model antigen and encapsulation of diphtheria antibody (D-Ab) in the composite architecture, this membrane could be used for reagentless electrochemical immunoassay. It displayed a porous and homogeneous composite architecture without the aggregation of the immobilized protein molecules. The formation of immunoconjugate by a simple one-step immunoreaction between D-Ag in sample solution and the immobilized D-Ab introduced the change in the potential. Under optimal conditions, the D-Ag analyte could be determined in the linear ranges from 10 to 800 ng ml⁻¹ with a relatively low detection limit of 2.3 ng ml⁻¹ at 3δ. The D-Ag immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy, and reproducibility. This composite membrane could be used efficiently for the entrapment of different biomarkers and clinical applications.     

Synchronous fluorescence determination and molecular modeling of 5-Aminosalicylic acid (5-ASA) interacted with human serum albumin

In this paper, we proposed a new method for the determination of either human serum albumin (HSA) or 5-Aminosalicylic acid (5-ASA) by synchronous fluorescence spectra and examined the interaction between them using the molecular modeling method under simulative physiological conditions. The optimum conditions of synchronous fluorometric determination of HSA were investigated and the method was successfully applied to the determination of 5-ASA added to serum, urine, and saliva samples. The linear range of the determination of HSA and 5-ASA were 1.60 – 414 μg mL⁻¹ and 0.76 –22.95 μg mL⁻¹, the detection limits were 0.552 μg mL⁻¹ and 0.38 μg mL⁻¹, respectively. In addition, the effect of various common ions on the determination of HSA with 5-ASA was also discussed at room temperature. Figure The salicylic acid moiety is located within the binding pocket. The ring of 5-ASA was inserted in the hydrophobic cavity of site I, and it is important to note that the residue ARG-218 and the trptophan residue of HSA (Trp214) are in close proximity to the ring of 5-ASA suggesting the existence of hydrophobic interaction between them.     

Enhancement of DNA immobilization and hybridization on gold electrode modified by nanogold aggregates

Gold electrodes modified by nanogold aggregates (nanogold electrode) were obtained by the electrodeposition of gold nanoparticles onto planar gold electrode. The Electrochemical response of single-stranded DNA (ssDNA) probe immobilization and hybridization with target DNA was measured by cyclic voltammograms (CV) using methylene blue (MB) as an electroactive indicator. An improving method using long sequence target DNA, which greatly enhanced the response signal during hybridization, was studied. Nanogold electrodes could largely increase the immobilization amount of ssDNA probe. The hybridization amount of target DNA could be increased several times for the manifold nanogold electrodes. The detection limit of nanogold electrode for the complementary 16-mer oligonucleotide (target DNA1) and long sequence 55-mer oligonucleotide (target DNA2) could reach the concentration of 10(-9) mol/L and 10(-11) mol/L, respectively, which are far more sensitive than that of the planar electrode.     

Bioremoval of hexavalent chromium from water by a salt tolerant bacterium, Exiguobacterium sp. GS1

Pollution of terrestrial surfaces and aquatic systems by hexavalent chromium, Cr(VI), is a worldwide public health problem. A chromium resistant bacterial isolate identified as Exiguobacterium sp. GS1 by 16S rRNA gene sequencing displayed high rate of removal of Cr(VI) from water. Exiguobacterium sp. GS1 is 99% identical to Exiguobacterium acetylicum. The isolate significantly removed Cr(VI) at both high and low concentrations (1–200 μg mL⁻¹) within 12 h. The Michaelis–Menten K _m and V _max for Cr(VI) bioremoval were calculated to be 141.92 μg mL⁻¹ and 13.22 μg mL⁻¹ h⁻¹, respectively. Growth of Exiguobacterium sp. GS1 was indifferent at 1–75 μg mL⁻¹ Cr(VI) in 12 h. At initial concentration of 8,000 μg L⁻¹, Exiguobacterium sp. GS1 displayed rapid bioremoval of Cr(VI) with over 50% bioremoval in 3 h and 91% bioremoval in 8 h. Kinetic analysis of Cr(VI) bioremoval rate revealed zero-order in 8 h. Exiguobacterium sp. GS1 grew and significantly reduced Cr(VI) in cultures containing 1–9% salt indicating high salt tolerance. Similarly the isolate substantially reduced Cr(VI) over a wide range of temperature (18–45  °C) and initial pH (6.0–9.0). The T _opt and initial pH_opt were 35–40  °C and 7–8, respectively. Exiguobacterium sp. GS1 displayed a great potential for bioremediation of Cr(VI) in diverse complex environments.     

Kinetic spectrophotometric method for the determination of ramipril in pharmaceutical formulations

The objective of this research was to develop a kinetic spectrophotometric method for determination of ramipril in pure form and pharmaceutical formulations. The method was based on the reaction of carboxylic acid group of the drug with a mixture of potassium iodate (KIO₃) and potassium iodide (KI) in aqueous medium at room temperature. The reaction is followed spectrophotometrically by measuring the increase in absorbance at 352 nm as a function of time. The initial-rate and fixed-time methods were adopted for constructing the calibration curves. Both the calibration curves were linear in the concentration range of 10.0–70.0 μg mL⁻¹. The detection limits were 0.02μg mL⁻¹ and 0.15-μg mL⁻¹ for initial rate and fixed time methods, respectively. The proposed methods are validated statistically and through recovery studies. The point and interval hypothesis tests have been performed confirming that there is no significant difference between the proposed methods and the reference method. The experimental true bias of all samples is less than ±2%. The methods have been successfully applied to the determination of ramipril in tablets and capsules. Published: October 27, 2005     

Disposable superoxide anion biosensor based on superoxide dismutase entrapped in silica sol–gel matrix at gold nanoparticles modified ITO electrode

A novel disposable biosensor based on direct electron transfer of superoxide dismutase (SOD) was fabricated for the determination of superoxide anion. The biosensor was constructed by electrodeposition of gold nanoparticles (GNPs) on the indium tin oxide (ITO) electrode and then immobilization of SOD in silica sol–gel (SG) network in the presence of cysteine on GNPs/ITO modified electrode surface. The distribution of GNPs on ITO electrode surface was examined by scanning electron microscopy (SEM). The immobilized SOD exhibited high catalytical activity towards superoxide anion. Parameters affecting the performance of the biosensor were also investigated. A linear calibration curve was obtained over the range from 0.08 to 0.64 μM with a correlation coefficient of 0.9937. The resulted biosensors were demonstrated to possess striking analytical properties for superoxide anion determination, such as high sensitivity, good accuracy, and long-term stability. It provides a promising platform for the fabrication of disposable biosensors.     

Highly sensitive gold nanoparticles biosensor chips modified with a self-assembled bilayer for detection of Con A

In this paper, an improved method for detection of Concanavalin A (Con A) with label-free optical biosensors is reported. 1-Dodecanethiol (DDT) was self-assembled onto gold nanoparticles which were deposited on glass slides, and then glycolipid molecules were inserted into dodecanethiol by physical interactions only. The recognition between Con A and carbohydrate was observed by UV-vis spectrophotometry. The absorption spectrum shifted when Con A was bound to the sugar residues of glycolipids immobilized onto nanogold slides, while almost no spectrum change was observed when another nonspecific protein molecule met the nanogold slides. The self-assembled bilayer on nanogold substrates had very high sensitivity for Con A, the minimum detection concentration of Con A can be down to 0.1 nM. In addition to the ultra sensitivity for investigating carbohydrate-lectin interaction, the self-assembled bilayer structure, is expected to replace many receptors which require time-consuming organic syntheses for the fixation to the transducer. The simplicity and sensitivity of this biosensor architecture once again show the prospect of nanogold application in biosensor.     

Carotenoid-to-chlorophyll ratio as a proxy for assay of total fatty acids and arachidonic acid content in the green microalga Parietochloris incisa

The relationships between pigment (carotenoid and chlorophyll) content with accumulation of total fatty acids (TFA) and arachidonic acid (AA) were studied in the green microalga Parietochloris incisa (Trebouxiophyceae, Chlorophyta) grown under different PFDs (35, 200, and 400 μmol photons m⁻² s⁻¹) and nitrogen availabilities. The growth of P. incisa under higher light and nitrogen deficiency was accompanied by accumulation of FA, an increase in carotenoid and a decline in chlorophyll content. It was found that the carotenoid-to-chlorophyll ratio (but not the individual pigment content) correlates closely with the volumetric content of both TFA and AA. Analysis of scattering-compensated absorption spectra of P. incisa suspensions revealed their tight relationship in the blue-green range of the spectrum with the carotenoid-to-chlorophyll ratio, TFA, and AA content. These findings allowed the development of algorithms for the non-destructive assay of TFA and AA in cell suspensions in the ranges of 0.09–3.04 and 0.04–1.7 μg mL⁻¹, with accuracy of 0.06 and 0.01 μg mL⁻¹, respectively, via analytically measured carotenoid-to-chlorophyll ratio and using the ratio of absorption coefficients at 510 and 678 nm, with accuracy of 0.07 and 0.02 μg mL⁻¹, respectively. The feasibility of obtaining essential spectral information concerning the physiological condition of P. incisa using a standard spectrophotometer is also shown.     

Targeting and sensing cancer cells with ZnO nanoprobes in vitro

A new class of zinc oxide quantum dots (ZnO QDs) was investigated as nanoprobes for targeting cancer cells in vitro. ZnO nanoparticles were synthesized using conventional sol–gel method and encapsulated using trimethoxy aminopropyl silane. Transferrin, the ligand targeting the cancer cells, was conjugated to the ZnO QDs. In vitro imaging studies using MDA-MB-231 showed the biocompatible ZnO nanoprobe selectively binding to the cell surface receptor and internalizing through receptor-mediated endocytosis. Time-lapsed photobleaching studies indicate the ZnO QDs to be resistant to photobleaching, making them suitable for long term imaging purpose. Investigation of the ZnO nanoprobe as a platform for sensitive bioassays indicates that it can be used as an alternative fluoroprobe for cancer cell targeting and sensing applications.     

Hydrophobicity as a possible reason for gelation of FG-rich nucleoporins

In this work we address the question of whether hydrophobic parts of FG-rich nucleoporins can be the reason for their ability to form a hydro-gel (Frey et al. in Science 314:3, 2006). We focus on the N-terminal fsFG domain of the essential yeast nucleoporin Nsp1p (Hurt in EMBO J 7:4323, 1988) as a nucleoporin model system and on the question of whether a phase transition between a sol and a gel phase exists. The N-terminal fsFG domain comprises 18 regular FSFG repeats and 16 less regular FG repeats. This domain is modeled, and a Metropolis Monte-Carlo algorithm is used to generate equilibrated ensembles of peptide networks, which were then analyzed by percolation theoretical methods. We take into account the excluded volume of the protein backbone and all side chains that are at least medium-sized (starting with Glu/E) as well as the hydrophobic clusters of the amino acid sequence. There is a competition between two kinds of entropic forces in the system: the excluded volume interactions and the hydrophobic parts of the nucleoporin strands. Therefore, it is not a priori clear whether the system percolates at a biologically realistic density. Nevertheless, we find a sol–gel phase transition in the system at a critical density of 42 mg mL⁻¹. This may be considered a hint that hydrophobic nucleoporin parts are key for the formation of gels in the nuclear pore complex.     

Hydrogen peroxide sensor based on Prussian blue electrodeposited on (3-mercaptopropyl)-trimethoxysilane polymer-modified gold electrode

A hydrogen peroxide (H₂O₂) sensor was developed by electrodepositing Prussian blue (PB) on a gold electrode modified with (3-mercaptopropyl)-trimethoxysilane (MPS) polymer. The characterization of the self-assembled electrode was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. The results of electrochemical experiments showed that such constructed sensor had a favorable catalytic ability to reduce H₂O₂. The MPS film on the modified gold electrode greatly enhanced the pH-adaptive range of PB. Large surface-to-volume ratio property of double-layer 2d-network MPS-modified PB electrode enabled stable and highly sensitive performance of the non-enzymatic H₂O₂ sensor. The linear range of H₂O₂ determined is from 2.0 × 10⁻⁶ to 2.0 × 10⁻⁴ mol L⁻¹ with a correlation coefficient of 0.9991 and a detection limit for H₂O₂ of 1.8 × 10⁻⁶ mol L⁻¹. The influences of the potentially interfering substances on the determination of H₂O₂ were investigated. This modified electrode exhibits a good selectivity and high sensitivity with satisfactory results.     

Hyaluronic acid depolymerization by ascorbate-redox effects on solid state cultivation of <Emphasis Type="Italic">Streptococcus zooepidemicus</Emphasis> in cashew apple fruit bagasse

The cashew fruit (Anacardium occidentale L.) has been used as a promising agricultural resource for the production of low-molecular weight (M_W) hyaluronic acid (HA) (10⁴–10⁵ Da). The cashew juice is a rich source of vitamin C containing, 1.2–2.0 g L⁻¹. This work explores the effects of the initial concentration of the ascorbate on the solid fermentation of the juice-moisturized bagasse from the cashew apple fruit. The results show that the M_W reduction of HA is proportional to the initial ascorbate concentration. The presence of ascorbate did not influence the Streptococcus zooepidemicus metabolism. However, the HA productivity was increased from 0.18 to 0.28 mg g⁻¹ h⁻¹ when the ascorbate concentration ranged from 1.7 to 10 mg mL⁻¹. These findings contribute to the controlled production of HA in a low M_W range, which is important in cell signalization, angiogenesis and nanoparticles production.