Multidimensional on-line sample preparation of verapamil and its metabolites by a molecularly imprinted polymer coupled to liquid chromatography-mass spectrometry

A new molecularly imprinted polymer (MIP) material was synthesized selective for verapamil and utilized for on-line metabolic screening of this common calcium antagonist in biological samples. Since some metabolites of verapamil have also shown pharmacological properties, a selective and sensitive sample preparation approach that provides a metabolic profile in biologically relevant samples is important. The MIP material was coupled on-line to a restricted access material (RAM) precolumn. The multidimensional nature of this set-up removed large matrix interferents such as proteins from the sample, while the selectivity of the MIP enabled further cleanup of the smaller analytes. The selectivity and extraction efficiency of the MIP for verapamil and its metabolites was evaluated in various biological matrices, such as cell cultures and urine. The experimental set-up with the developed method enabled the direct injection of biological samples for the selective isolation, preconcentration, identification and analysis of verapamil and its phase I metabolites by LC-MS(n). This multidimensional approach provided much qualitative information about the metabolic profile of verapamil in various biological matrices. An analytical method was developed for the quantification of verapamil and gallopamil in urine, plasma and cell culture. Acceptable linearity (R(2)=0.9996, 0.9982 and 0.9762) with an average injection repeatability (n=3) of 10, 25 and 15% R.S.D. was determined for urine, plasma and cell culture, respectively. This is the first application of the procedure for the selective metabolic screening of verapamil in biological samples.     

Determination of drugs in biological fluids by direct injection of samples for liquid-chromatographic analysis

The analysis of drugs in various biological fluids is an important criterion for the determination of the physiological performance of a drug. After sampling of the biological fluid, the next step in the analytical process is sample preparation. The complexity of biological fluids adds to the challenge of direct determination of the drug by chromatographic analysis, therefore demanding a sample preparation step that is often time-consuming, tedious, and frequently overlooked. However, direct on-line injection methods offer the advantage of reducing sample preparation steps and enabling effective pre-concentration and clean-up of biological fluids. These procedures can be automated and therefore reduce the requirements for handling potentially infectious biomaterial, improve reproducibility, and minimize sample manipulations and potential contamination.The objective of this review is to present an overview of the existing literature with emphasis on advances in automated sample preparation methods for liquid-chromatographic methods. More specifically, this review concentrates on the use of direct injection techniques, such as restricted-access materials, turbulent-flow chromatography and other automated on-line solid-phase extraction (SPE) procedures. It also includes short overviews of emerging automated extraction-phase technologies, such as molecularly imprinted polymers, in-tube solid-phase micro-extraction, and micro-extraction in a packed syringe for a more selective extraction of analytes from complex samples, providing further improvements in the analysis of biological materials. Lastly, the outlook for these methods and potential new applications for these technologies are briefly discussed.     

Determination of drugs in biological fluids by direct injection of samples for liquid-chromatographic analysis

The analysis of drugs in various biological fluids is an important criterion for the determination of the physiological performance of a drug. After sampling of the biological fluid, the next step in the analytical process is sample preparation. The complexity of biological fluids adds to the challenge of direct determination of the drug by chromatographic analysis, therefore demanding a sample preparation step that is often time-consuming, tedious, and frequently overlooked. However, direct on-line injection methods offer the advantage of reducing sample preparation steps and enabling effective pre-concentration and clean-up of biological fluids. These procedures can be automated and therefore reduce the requirements for handling potentially infectious biomaterial, improve reproducibility, and minimize sample manipulations and potential contamination. The objective of this review is to present an overview of the existing literature with emphasis on advances in automated sample preparation methods for liquid-chromatographic methods. More specifically, this review concentrates on the use of direct injection techniques, such as restricted-access materials, turbulent-flow chromatography and other automated on-line solid-phase extraction (SPE) procedures. It also includes short overviews of emerging automated extraction-phase technologies, such as molecularly imprinted polymers, in-tube solid-phase micro-extraction, and micro-extraction in a packed syringe for a more selective extraction of analytes from complex samples, providing further improvements in the analysis of biological materials. Lastly, the outlook for these methods and potential new applications for these technologies are briefly discussed.     

Evaluation of the influence of protein precipitation prior to on-line SPE-LC-API/MS procedures using multivariate data analysis

Matrix effects on mass spectrometry (MS) response were investigated with three atmospheric pressure ionization (API) sources after on-line solid-phase extraction (SPE) of human plasma. On-line SPE was evaluated with one restricted access material (RAM), two large particle supports (LPS) and one monolith. A sample protein precipitation (PP) with acetonitrile (2:1) and a direct injection were tested. Principal component analysis (PCA) was performed to simplify data presentation and interpretation. Protein precipitation was found to be mandatory for reducing signal modification. Regarding sensitivity towards matrix effects after PP, atmospheric pressure photoionization (APPI) was globally the least sensitive ionization mode while electrospray ionization ESI was the most sensitive.     

Fast automated extraction and clean-up of biological fluids for polychlorinated dibenzo-p-dioxins,dibenzofurans and coplanar polychlorinated biphenyls analysis

A fast automated extraction and clean-up procedure for low-level analysis of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (cPCBs) in biological fluids is presented. Online extraction of prepared fluids is carried out using disposable octadecyl bonded (C(18)) solid-phase extraction columns. Extracts are then cleaned up through disposable multi-layer silica (acidic, basic and neutral) and dispersed PX-21 carbon columns. This new methodology is compared with classical Soxhlet extraction and manual solid-phase extraction in terms of repeatability, reproducibility, accuracy and recovery rates for reference and certified materials. Robustness is evaluated on different matrices, such as cow's milk, breast milk and human serum. As a consequence of the reduced number of reusable glassware used, as well as lowering of solvent consumption, recorded blank levels are decreased in favor of limits of detection (LODs). Total analysis time and cost are further reduced using simultaneous sample preparation units and the sample throughput is increased compared to classical methods. As a result, this new approach appears to be suitable for the fast sample preparation often required for such fluids in case of emergency foodstuffs analysis or during large epidemiological studies.     

Direct determination of selenium and other trace elements in serum samples by ICP-MS.

Selenium belongs to a group of trace elements of special interest in biological samples for clinical diagnosis. Selenium has antioxidizing functions and is essential for providing the organism with triiodothyronine produced from thyroxine. Among several analytical techniques used to determine the Se concentration in serum, Inductively Coupled Plasma Mass Spectrometry (ICP-MS) has been used in the past because of its high sensitivity. Interference problems originating from different ions on the major Se isotopes have been described to be a limiting factor for the direct determination of Se in these matrices. Standard addition calibration or isotope dilution is often required to overcome carbon-enhanced ionisation effects in biological sample matrices. In most cases, the typical serum sample volume which is available for the analysis is limited to 0.5 ml or less, making multiple sample preparation for standard addition calibration impractical. Isotope dilution requires enriched isotopes and substantial sample preparation. Furthermore, the approximate Se concentration in every sample has to be known to adjust the appropriate amount of spike to each sample. Matrix matching with methanol has been described to overcome ionisation effects but we found limiting factors of this application when other trace elements are also determined within one sample run. This paper describes an effective sample preparation method which allows the direct determination of Se in serum without limiting the analytical capabilities for the additional determination of Al, Cu, Ni, Co, Cd, Mn and Zn in a single sample run by ICP-MS. Optimization procedures are presented and results of the analysis of reference samples are discussed, with a comparison of more than 150 serum data with those obtained by the GF-AAS method.     

Affinity chromatography as a method for sample preparation in gas chromatography/mass spectrometry.

Analytical chemistry aims at developing analytical methods and techniques for unequivocal identification and accurate quantitation of natural and synthetic compounds in a given matrix. Analytical methods based on the mass spectrometry (MS) technology, e.g., GC/MS and LC/MS and their variants, GC/tandem MS and LC/tandem MS, are best suited both for qualitative and quantitative analyses. GC/MS methods not only serve as reference methods, e.g., in clinical chemistry, but they are now widely and routinely used for quantitative determination of numerous analytes. However, despite inherent accuracy, analytical methods based on GC/MS commonly consist of several analytical steps, including extraction and derivatization of the analyte. In general, unequivocal identification and accurate quantification of an analyte in very low concentrations in complex matrices require further chromatographic techniques, such as high-performance liquid chromatography (HPLC) and thin-layer chromatography (TLC) for sample purification. In recent years, affinity chromatography (e.g., boronate and immunoaffinity chromatography) has been developed to a superior technique for sample preparation of numerous classes of compounds in GC/MS. In this article, the application and importance of affinity chromatography as a method for sample preparation in modern quantitative GC/MS method is described and discussed, using as examples various natural and synthetic compounds, such as arachidonic acid derivates, nitrosylated and nitrated proteins, steroids, drugs, and toxins.     

Sorptive extraction techniques in sample preparation for organophosphorus pesticides in complex matrices

Organophosphorus pesticides (OPPs), widely known as persistent organic pollutants, are the most popular contaminants in agriculture products in developing countries. The determination of OPPs in complex matrices, such as food, environmental and biological samples, usually requires extensive sample pretreatment. This review focuses on the sorptive extraction techniques applied as sample pretreatment for OPPs in complex matrices, including solid-phase extraction (SPE) and solid-phase microextraction (SPME). These methods are evaluated and the applications of each technique are demonstrated extensively with many practical examples.     

Biochemical Analyses of Proteins from <Emphasis Type="Italic">Duttaphrynus melanostictus</Emphasis> (<Emphasis Type="Italic">Bufo melanostictus</Emphasis>) Skin Secretion: Soluble Protein Retrieval from a Viscous Matrix by Ion-Exchange Batch Sample Preparation

A crucial step in scientific analysis can be sample preparation, and its importance increases in the same rate as the sensitivity of the following employed/desired analytical technique does. The need to analyze complex, viscous matrices is not new, and diverse approaches have been employed, with different success rates depending on the intended molecules. Solid-phase extraction, for example, has been successfully used in sample preparation for organic molecules and peptides. However, due to the usual methodological conditions, biologically active proteins are not successfully retrieved by this technique, resulting in a low rate of protein identification reported for the viscous amphibian skin secretion. Here we describe an ion-exchange batch processing sample preparation technique that allows viscous or adhesive materials (as some amphibian skin secretions) to be further processed by classical liquid chromatography approaches. According to our protocol, samples were allowed to equilibrate with a specific resin that was washed with appropriated buffers in order to yield the soluble protein fraction. In order to show the efficiency of our methodology, we have compared our results to classically prepared skin secretion, i.e., by means of filtration and centrifugation. After batch sample preparation, we were able to obtain reproductive resolved protein chromatographic profiles, as revealed by SDS-PAGE, and retrieve some biological activities, namely, hydrolases belonging to serine peptidase family. Not only that, but also the unbound fraction was rich in low molecular mass molecules, such as alkaloids and steroids, making this sample preparation technique also suitable for the enrichment of such molecules.     

Considerations in the determination of boron at low concentrations

Experimental evidence now supports the nutritional essentiality of boron (B) in some biological systems, and accordingly, the need for reliable analytical B data is increasing. However, the accurate determination of B in biological materials is a formidable challenge at low concentrations (<1 mg B/kg). Recent studies still show significant analytical discrepancies in the analysis of animal tissues and fluids, despite the development of instrumental techniques such as TIMS, ICP-MS, ICP-ES, ICAP, SIMS, NA-MS, PGAA, NRA, and so forth, which have demonstrated detection limits approaching or exceeding (μgB/kg concentrations. Since boric acid is both volatile and ubiquitous in nature, the chemical and physical pathways for B contamination and its loss are manifold, especially during sample preparation. An added obstacle is the inadequacy of biological reference materials certified for B below mg B/kg. With an emphasis toward sample preparation and ICP-MS analysis, examples are provided in this article to help the analyst avoid common problems associated with the analysis of B from biological sources. Topics that are discussed include contamination from Teflon vessels during microwave digestion, losses owing to freeze-drying, B isotopic variations, standards preparation, reagent backgrounds, and instrumental interferences.     

Capillary electrophoresis analysis of biofluids with a focus on less commonly analyzed matrices

The analysis by capillary electrophoresis of less commonly analyzed biofluids is reviewed. The sample matrices considered include airway surface fluid, sputum, synovial fluid, amniotic fluid, saliva, cerebrospinal fluid, aqueous humor, vitreous humor, and sweat. Many of the techniques used in the analysis of abundant and commonly tested biofluids such as plasma or urine can be applied to these other matrices, e.g. sample extraction prior to analysis. However, for some of these alternative biofluids the available sample amounts are only in the nanoliter or low microliter range, which places constraints on the sample preparation options which are available. For such samples, direct sample injection may be necessary, possibly coupled with on-capillary concentration or derivatization approaches. Particular attention is paid in this review to analyses where the sample is directly injected onto the separation capillary or where minimal sample preparation is performed.     

Matrix solid phase dispersion (MSPD)

A review of the many uses of matrix solid phase dispersion (MSPD) in the extraction and analysis of a variety of compounds from a range of samples is provided. Matrix solid phase dispersion (MSPD) has found particular application as a somewhat generic analytical process for the preparation, extraction and fractionation of solid, semi-solid and/or highly viscous biological samples. Its simplicity and flexibility contribute to it being chosen over more classical methods for these purposes. MSPD is based on several simple principles of chemistry and physics, involving forces applied to the sample by mechanical blending to produce complete sample disruption and the interactions of the sample matrix with a solid support bonded-phase (SPE) or the surface chemistry of other solid support materials. These principles are discussed as are the factors to be considered in conducting a MSPD extraction.     

Matrix solid phase dispersion (MSPD)

A review of the many uses of matrix solid phase dispersion (MSPD) in the extraction and analysis of a variety of compounds from a range of samples is provided. Matrix solid phase dispersion (MSPD) has found particular application as a somewhat generic analytical process for the preparation, extraction and fractionation of solid, semi-solid and/or highly viscous biological samples. Its simplicity and flexibility contribute to it being chosen over more classical methods for these purposes. MSPD is based on several simple principles of chemistry and physics, involving forces applied to the sample by mechanical blending to produce complete sample disruption and the interactions of the sample matrix with a solid support bonded-phase (SPE) or the surface chemistry of other solid support materials. These principles are discussed as are the factors to be considered in conducting a MSPD extraction.     

Liquid ultraviolet matrix-assisted laser desorption/ionization -- mass spectrometry for automated proteomic analysis

We have combined several key sample preparation steps for the use of a liquid matrix system to provide high analytical sensitivity in automated ultraviolet -- matrix-assisted laser desorption/ionisation -- mass spectrometry (UV-MALDI-MS). This new sample preparation protocol employs a matrix-mixture which is based on the glycerol matrix-mixture described by Sze et al. The low-femtomole sensitivity that is achievable with this new preparation protocol enables proteomic analysis of protein digests comparable to solid-state matrix systems. For automated data acquisition and analysis, the MALDI performance of this liquid matrix surpasses the conventional solid-state MALDI matrices. Besides the inherent general advantages of liquid samples for automated sample preparation and data acquisition the use of the presented liquid matrix significantly reduces the extent of unspecific ion signals in peptide mass fingerprints compared to typically used solid matrices, such as 2,5-dihydroxybenzoic acid (DHB) or alpha-cyano-hydroxycinnamic acid (CHCA). In particular, matrix and low-mass ion signals and ion signals resulting from cation adduct formation are dramatically reduced. Consequently, the confidence level of protein identification by peptide mass mapping of in-solution and in-gel digests is generally higher.     

Evaluation of online extraction/mass spectrometry for in vivo cassette analysis

An online extraction/mass spectrometry technique was evaluated for direct analysis of plasma samples. A simple user-friendly online extraction system that consists of two pumps, an autosampler, a six-port switching valve and a mass spectrometer is described. The system was controlled by the LC-MS software (Masslynx 3.5, Waters Corporation, Beverly, MA). Various analytical conditions such as extraction column, mobile phases, run time and wash solvent were optimized to establish an analytical method that was simple, easy to set up and generic. Sample preparation effort was minimal, which included dilution of plasma with water and centrifugation conducted in 96-well plate format. The system was used to analyze in vivo plasma samples from rat n-in-one cassette dosing studies. Concentration and pharmacokinetic (PK) data obtained from the online extraction method were comparable with data obtained from the protein precipitation extraction method. Overall, the simple, robust online extraction system provides cost savings by minimizing sample preparation and method development time. The system was used to analyze compounds from different structural classes. These studies suggest that calculated lipophilicity of a compound can be used as a tool for pre-selection of extraction column, which would save method development time for early discovery studies.     

Separation and identification methods for metalloproteinase inhibitors

Metalloproteinase inhibitors are being explored for the treatment of a wide variety of human diseases including cancers, arthritis, cardiovascular disorders, human immunodeficiency virus infection, and central nervous system illnesses. This review provides an overview of various analytical sample preparation, separation, detection, and identification techniques employed for the quantitative and qualitative determination of these inhibitor compounds. Special emphasis is placed on biological sample preparation by automated solid-phase extraction, liquid–liquid extraction, and protein precipitation by centrifugation or filtration. Other sample preparation methodologies are also evaluated. Applications of high-performance liquid chromatography, gas chromatography, and capillary electrophoresis to the quantitative determination of metalloproteinase inhibitors are described. Examples of qualitative analysis of metalloproteinase inhibitors by hyphenated liquid chromatography with mass spectrometry and nuclear magnetic resonance are also presented. The advantages and limitations of these separation and identification methodologies as well as other less frequently employed techniques are assessed and discussed.     

Development of a high-throughput LC/APCI-MS method for the determination of thirteen phytoestrogens including gut microbial metabolites in human urine and serum

The investigation into the potential usefulness of phytoestrogens in the treatment of menopausal symptoms requires large-scale clinical trials that involve rapid, validated assays for the characterization and quantification of the phytoestrogenic precursors and their metabolites in biological matrices, as large interindividual differences in metabolism and bioavailability have been reported. Consequently, a new sensitive high-performance liquid chromatography-mass spectrometry method (HPLC–MS) for the quantitative determination of thirteen phytoestrogens including their most important gut microbial metabolites (genistein, daidzein, equol, dihydrodaidzein, O-desmethylangolensin, coumestrol, secoisolariciresinol, matairesinol, enterodiol, enterolactone, isoxanthohumol, xanthohumol and 8-prenylnaringenin) in human urine and serum within one single analytical run was developed. The method uses a simple sample preparation procedure consisting of enzymatic deconjugation followed by liquid–liquid extraction (LLE) or solid-phase extraction (SPE) for urine or serum, respectively. The phytoestrogens and their metabolites are detected with a single quadrupole mass spectrometer using atmospheric pressure chemical ionization (APCI), operating both in the positive and the negative mode. This bioanalytical method has been fully validated and proved to allow an accurate and precise quantification of the targeted phytoestrogens and their metabolites covering the lower parts-per-billion range for the measurement of relevant urine and serum levels following ingestion of phytoestrogen-rich dietary supplements.     

Proteomic analysis of lipid microdomains from lipopolysaccharide-activated human endothelial cells

The endothelium plays a critical role in orchestrating the inflammatory response seen during sepsis. Many of the inflammatory effects of Gram-negative sepsis are elicited by lipopolysaccharide (LPS), a glycolipid component of bacterial cell walls. Lipid-rich microdomains have been shown to concentrate components of the LPS signaling system. However, much remains to be learned about which proteins are constituents of lipid microdomains, and how these are regulated following cell activation. Progress in this area would be accelerated by employing global proteomic analyses, but the hydrophobicity of membrane proteins presents an analytical barrier to the effective application of such approaches. Herein, we describe a method to isolate detergent-resistant membranes from endothelial cells, and prepare these samples for proteomic analysis in a way that is compatible with subsequent separations and mass spectrometric (MS) analysis. In the application of these sample preparation and MS analyses, 358 proteins from the lipid-rich microdomains of LPS-activated endothelial cell membranes have been identified of which half are classified as membrane proteins by Gene Ontology. We also demonstrate that the sample preparation method used for solubilization and trypsin digestion of lipid-rich microdomains renders the membrane spanning sequences of transmembrane proteins accessible for endoproteolytic hydrolysis. This analysis sets the analytical foundation for an in-depth probing of LPS signaling in endothelial cells.