庚型肝炎病毒全长基因在体外的表达

利用第二军医大学微生物学教研室克隆的庚型肝炎病毒 (HGV)全长基因组 (HGVqz) ,构建由不同启动子调控的HGV表达载体 ,将 2种表达载体及HGV全长基因片段进行体外表达 ,探讨此HGV全长基因克隆的功能。利用脂质体将HGV全长基因cDNA以及表达载体转入Changliver或NIH 3T3细胞进行瞬时表达 ,分别提取转染72h后转染细胞的RNA及蛋白质进行RT PCR及Westernblotting ,以检测HGV基因的表达。RT PCR及Westernblotting结果表明 ,HGV全长基因cDNA以及 2种表达载体均可以在体外培养的细胞内表达 ,其表达产物为HGV前体蛋白 ,分子量约为 310ku。第二军医大学微生物学教研室克隆的HGV全长基因具有正确的开读框架和可表达性 ,能表达HGV前体蛋白 ,但在体外培养细胞内不能完成前体蛋白的剪切     

Positive selection vectors for high-fidelity PCR cloning

The power of PCR cloning of a target DNA fragment is limited by polymerase-induced mutations. While high-fidelity PCR products can be achieved by reducing the number of PCR cycles, the cloning of the very small amount of DNA thus amplified should give only a few recombinant clones (carrying an insert), which would be very difficult to screen from thousands of background false-positive clones generated by all the currently available vectors, including the positive selection vectors. False-positive clones are mostly generated by the recircularization of linearized vectors that have lost some bases at their ends due to digestion with contaminating exonuclease activities present in restriction enzymes, ligases, polymerases, and other reagents. To overcome this problem, two positive selection vectors, pRGR1Ap and pREM5Tc, have been developed, based on the principles of reporter gene reconstruction and regulatory element modulation, respectively. A PCR primer carrying a vector-specific sequence at its 5' end is used in PCR. When the resultant PCR products are ligated to the specific vector, an antibiotic resistance gene is expressed, thus donating positive selection capability to the harboring cells in a specific selection medium. These vectors cloned PCR fragments generated from less than a femtomole quantity of Escherichia coli genomic DNA after only three cycles of PCR amplification, thus greatly reducing the number of recombinant clones containing polymerase-induced mutations.     

Vectors for the expression of PCR-amplified immunoglobulin variable domains with human constant regions.

Cassette vectors have been constructed for mammalian expression of complete immunoglobulin heavy and light chain genes whose variable regions are produced by the polymerase chain reaction (PCR). The light and heavy chain vectors have promoter, leader, partial intron, enhancer and constant region segments within modified pSV2-gpt and pSV2-neo plasmids, respectively. Variable (V) regions are obtained by PCR using a two step process: 1) the V gene is amplified from genomic or cDNA, cloned into an intermediate vector and sequenced; 2) the first PCR product serves as the template for a second amplification in which restriction enzyme recognition sites and limited flanking intron sequence are added. The second PCR product is inserted into the expression vector, which is then transfected into mouse myeloma cells. These vectors contain human constant regions and may be used to express chimeric, humanized or human Ig genes. This report describes the design of these vectors and their application for the expression of chimeric 60.3, an anti-CD18 antibody.     

A PCR-based high-throughput screen with multiround sample pooling: application to somatic cell gene targeting

Here, we describe a method of systematic PCR screening with multiround sample pooling for the isolation of rare PCR-positive samples. As an example, we have applied this protocol to the recovery of gene-targeted clones in human somatic cells comprising only 0.02-0.17% of cells transduced with targeting vectors. Initially, cells infected with targeting vectors are seeded and grown in fourteen 96-well tissue culture plates. Samples are then collected from these plates and subjected to two rounds of pooling to yield twelve 'superpools' used for an initial PCR. After identifying PCR-positive samples, de-pooling is carried out with successive rounds of PCR screening, using samples of decreasing complexity. Single-cell cloning is subsequently performed to isolate gene-targeted clones. The entire protocol can be completed in 4-8 weeks depending on the proliferative capacity of the cell line.     

Thematic Review Series: Recent Advances in the Treatment of Lysosomal Storage Diseases: Gene therapy for the neurological manifestations in lysosomal storage disorders

Over the past several years, considerable progress has been made in the development of gene therapy as a therapeutic strategy for a variety of inherited metabolic diseases, including neuropathic lysosomal storage disorders (LSDs). The premise of gene therapy for this group of diseases is borne of findings that genetic modification of a subset of cells can provide a more global benefit by virtue of the ability of the secreted lysosomal enzymes to effect cross-correction of adjacent and distal cells. Preclinical studies in small and large animal models of these disorders support the application of either a direct in vivo approach using recombinant adeno-associated viral vectors or an ex vivo strategy using lentiviral vector-modified hematopoietic stem cells to correct the neurological component of these diseases. Early clinical studies utilizing both approaches have begun or are in late-stage planning for a small number of neuropathic LSDs. Although initial indications from these studies are encouraging, it is evident that second-generation vectors that exhibit a greater safety profile and transduction activity may be required before this optimism can be fully realized. Here, I review recent progress and the remaining challenges to treat the neurological aspects of various LSDs using this therapeutic paradigm.     

Adenovirus-mediated gene transfer to ciliated airway epithelia requires prolonged incubation time.

The efficiency of adenovirus-mediated gene transfer to airway epithelia will be an important factor in determining whether recombinant adenoviruses can be developed as vectors for transferring cystic fibrosis transmembrane conductance regulator (CFTR) cDNA to patients with cystic fibrosis. Current understanding of the biology of CF lung disease suggests that vectors should express transgene in mature, ciliated airway epithelia. We evaluated the efficiency of adenovirus-mediated gene transfer to primary cultures of normal and CF human airway epithelia. Our studies showed that the airway cells developed from an undifferentiated epithelium with markers characteristic of basal cells and a surface covered by short microvilli 3 days after seeding to a mature epithelium whose apical surface was covered with cilia by 10 to 14 days. The ability of adenovirus vectors to express a reporter gene and to correct defective cyclic AMP-stimulated Cl- transport in CF epithelia was correlated inversely with the state of differentiation. However, the inefficiency of adenovirus-mediated gene transfer could be partially corrected when the contact time between vector and epithelium was prolonged. After prolonged contact, we observed complete correction of the CF Cl- transport defect in differentiated CF airway epithelia in culture and of the Cl- transport defect in the nasal epithelia of mice homozygous for the deltaF508 mutation. The fact that gene transfer to airway epithelia required prolonged incubation with vector contrasts with the rapid infection observed in cell models such as 293 and HeLa cells, which are commonly used to study adenovirus infection. Gene transfer observed after prolonged incubation may result from mechanisms different from those that mediate infection of 293 cells. These observations suggest that interventions that either increase the contact time or alter the epithelium or the vector may be required to facilitate gene transfer to ciliated respiratory epithelia.     

High efficiency single step production of expression plasmids from cDNA clones using the Flexi Vector cloning system

The success of structural genomics and proteomics initiatives is dependent on the availability of target genes in vectors suitable for protein production. Here, we compare two high-throughput methods for producing expression vectors from plasmid-derived cDNA fragments. Expression vectors were constructed for compatibility with the Gateway recombination cloning system and the Flexi Vector restriction-based cloning system. Cloning protocols for each system were conducted in parallel for 96 different target genes from PCR through the production of sequence-verified expression clones. The short nucleotide sequences required to prepare the target open reading frames for Flexi Vector cloning allowed a single-step PCR protocol, resulting in fewer mutations relative to the Gateway protocol. Furthermore, through initial cloning of the target open reading frames directly into an expression vector, the Flexi Vector system gave time and cost savings compared to the protocol required for the Gateway system. Within the Flexi Vector system, genes were transferred between four different expression vectors. The efficiency of gene transfer between Flexi Vectors depended on including a region of sequence identity adjacent to one of the restriction sites. With the proper construction in the flanking sequence of the vector, gene transfer efficiencies of 95-98% were demonstrated.     

Universal vectors for constructing artificial microRNAs in plants

Universal amiRNA vectors (pUAs) for constructing plant amiRNAs in Arabidopsis and rice have been developed. By using type IIg restriction enzyme, BaeI, a single amiRNA construct can be produced using only one PCR and one ligation reaction. Thus, only one pair of primers is required for each amiRNA vector and these can be designed to be compatible with existing or newly developed methods. Because the BaeI recognition sequence is completely digested, there is no modification to the miRNA backbone, therefore avoids the risk of sequence changes that may affect downstream analysis. Based on these vectors, specific amiRNA constructs were created and verified. With optimized parameters, 38–45 % colonies for each amiRNA construct contain insertions with the expected orientation, and approximately 80 % of these colonies have the correct sequences.     

miR-455慢病毒表达载体的构建与鉴定

目的：构建人源microRNA-455（miR-455）慢病毒载体,并鉴定成熟has-miR-455在细胞内的表达水平。方法：提取siHa细胞中的人基因组DNA,设计并合成人miR-455的上下游引物,PCR扩增目的基因,将其中表达miR-455的结构经酶切后插入慢病毒转移质粒pWPT-GFP,构建成pWPT-GFP-pri-miR-455,在293T细胞中与pMD2G、pSPAX2包装产生慢病毒,并用含慢病毒的上清感染SiHa细胞。结果：测序结果证明插入质粒载体中的miR-455前体序列完全正确,慢病毒载体构建成功并获得相应的慢病毒;重组慢病毒质粒pWPT-GFP-pri-miR-455感染SiHa细胞后上调miR-455的表达近40倍。结论：构建了miR-455的慢病毒载体,并能在293T细胞中表达,产生的慢病毒能成功感染SiHa细胞。为进一步研究miR-455的功能,以及利用慢病毒进行基因治疗奠定了基础。     

The Comparative and Functional Study between Two Construction Methods of shRNA Expression Vector Targeted LMP1 Gene Encoded by EBV

To look for a more stable and convenient way of constructing short hairpin RNA expression vectors targeting the latent membrane protein-1(LMP-1) encoded by Epstein-Barr virus(pshLMP1), and to study the inhibition function of pshLMP1 expression vectors in HNE1 cells, we designed the pshLMP1 expression cassette and pshLMP1 expression vectors by both the annealing method and PCR method and then co-transfected with pEGFP-N1-1158 into HNE1 cells to observe the mRNA and protein levels of LMP-1 genes by green fluorescence analysis, RT-PCR and western blot. pshLMP1 expression vectors were successfully obtained by both methods but better cloning efficiency was achieved and fewer deletions and mutations of nucleotides were achieved with the PCR method. Furthermore, the mRNA and protein levels of LMP-1 genes were down-regulated by pshLMP1 expression vectors. According to our research, we found that the PCR method provides a more efficient way to construct pshLMP1 expression vectors which have the ability to inhibit the function of LMP-1 genes expressed in HNE1 cells, and also provides a novel application of RNA interference technology against-EBV.     

The Comparative and Functional Study between Two Construction Methods of shRNA Expression Vector Targeted LMP1 Gene Encoded by EBV

To look for a more stable and convenient way of constructing short hairpin RNA expression vectors targeting the latent membrane protein-1(LMP-1)encoded by Epstein-Barr virus(pshLMP1),and to study the inhibition function of pshLMP1 expression vectors in HNE1 cells,we designed the pshLMP1 expression cassette and pshLMP1 expression vectors by both the annealing method and PCR method and then co-transfected with pEGFP-N1-1158 into HNE1 cells to observe the mRNA and protein levels of LMP-1 genes by green fluorescence analysis,RT-PCR and western blot.pshLMP1 expression vectors were successfully obtained by both methods but better cloning efficiency was achieved and fewer deletions and mutations of nucleotides were achieved with the PCR method.Furthermore,the mRNA and protein levels of LMP-1 genes were down-regulated by pshLMP1 expression vectors.According to our research,we found that the PCR method provides a more efficient way to construct pshLMP1 expression vectors which have the ability to inhibit the function of LMP-1 genes expressed in HNE1 cells,and also provides a novel application of RNA interference technology against-EBV.     

The comparative and functional study between two construction methods of shRNA expression vector targeted <Emphasis Type="Italic">LMP1</Emphasis> gene encoded by EBV

To look for a more stable and convenient way of constructing short hairpin RNA expression vectors targeting the latent membrane protein-1(LMP-1) encoded by Epstein-Barr virus(pshLMP1), and to study the inhibition function of pshLMP1 expression vectors in HNE1 cells, we designed the pshLMP1 expression cassette and pshLMP1 expression vectors by both the annealing method and PCR method and then co-transfected with pEGFP-N1-1158 into HNE1 cells to observe the mRNA and protein levels of LMP-1 genes by green fluorescence analysis, RT-PCR and western blot. pshLMP1 expression vectors were successfully obtained by both methods but better cloning efficiency was achieved and fewer deletions and mutations of nucleotides were achieved with the PCR method. Furthermore, the mRNA and protein levels of LMP-1 genes were down-regulated by pshLMP1 expression vectors. According to our research, we found that the PCR method provides a more efficient way to construct pshLMP1 expression vectors which have the ability to inhibit the function of LMP-1 genes expressed in HNE1 cells, and also provides a novel application of RNA interference technology against-EBV.      

Manipulation of baculovirus vectors

Baculovirus expression vectors provide an excellent system for the synthesis of recombinant proteins in insect cells. This article presents sufficient background information to allow the nonspecialist to understand the basic principles of the technology and the development of baculovirus expression vectors. A summary of the most commonly used plasmids and viruses is presented. Detailed techniques are described to enable recombinant baculoviruses to be constructed. These methods include the protocols required for propagating insect cells in culture and their subsequent infection with viruses.     

Efficient functional pseudotyping of oncoretroviral and lentiviral vectors by Venezuelan equine encephalitis virus envelope proteins

Murine oncoretroviruses and lentiviruses pseudotyped with envelope proteins of alphaviruses have shown great potential in providing broad-host-range, stable vectors for gene therapy. Unlike vesicular stomatitis virus G protein-pseudotyped vectors, they are not neutralized by complement and do not appear to cause significant tissue damage. Here we report the production of murine oncoretroviral and lentiviral vectors pseudotyped with the envelope proteins of Venezuelan equine encephalitis virus (VEEV). When optimized, these pseudotypes achieve titers of 10⁶ CFU/ml, which is 5- to 10-fold higher than for previous vectors pseudotyped with envelope proteins from other alphaviruses. They can also be concentrated or stored frozen without significant loss of infectivity. Consistent with the tropism of the envelope donor, they transduce a broad array of human cell types, including lung epithelial cells, neuronal cells, lymphocytes, and fibroblasts. Infection is blocked by agents that inhibit endosomal acidification and by neutralizing antibodies against VEEV. These observations indicate that the pseudotypes present native epitopes on their surface and enter through a VEEV envelope-dependent, pH-sensitive mechanism. The fact that the pseudotypes are unaffected by sera reactive to other alphaviruses indicates that they may be useful when successive gene therapies are required in the presence of an active immune response. In this case, having an array of alphavirus-based vectors with similar cell tropisms would be highly advantageous. These vectors may also be useful in diagnostic assays in which infectious VEEV is undesirable but immune reactivity to native epitopes is required.     

Vectors for ligation-independent construction of lacZ gene fusions and cloning of PCR products using a nicking endonuclease

Several ligation-independent cloning methods have been developed that offer advantages for construction of recombinant plasmids at high efficiency while minimizing cloning artifacts. Here we report new plasmid vectors that use the nicking endonuclease Nt.BspQI to generate extended single stranded tails for direct cloning of PCR products. The vectors include pLacCOs1, a ColE1-derivative plasmid imparting resistance to ampicillin, which allows facile construction of lacZ translational fusions and pKanCOs1, a pSC101-derivative cloning vector that imparts resistance to kanamycin, for cloning of PCR amplicons from genomic DNA as well as from ampicillin-based plasmids. We have successfully used these plasmids to directionally clone and characterize bacterial promoters that exhibit temperature regulated expression, as well as for cloning a variety of PCR products. In all cases, constructs with the correct configurations were generated at high efficiency and with a minimal number of manipulations. The cloning vectors can also be easily modified to incorporate additional reporter genes or to express epitope-tagged gene products.     

A universal cloning vector using vaccinia topoisomerase I

Vaccinia DNA topoisomerase I (TOPO) charged vectors with a sticky T are routinely used to clone polymerase chain reaction (PCR) products with an extra A at their 3′ end (TOPO TA Cloning from Invitrogen). TOPO charged blunt vectors are used to clone blunt end PCR products (TOPO Blunt Cloning). Here, we demonstrate that both TOPO TA vectors and TOPO Blunt vectors can be used to clone PCR products with either a blunt end or an extra A at the 3′ end. We further demonstrate that these vectors can be used to clone sticky end DNA generated with restriction enzymes. In summary, these TOPO vectors can be used as universal cloning vectors.