Tuning iridium(III) complexes containing 2-benzo[b]thiophen-2-yl-pyridine based ligands in the red region

Synthesis and characterization of four iridium(III) complexes containing 2-benzo[b]thiophen-2-yl-pyridine based ligands are reported. The absorption, emission, electrochemistry, and thermostability of the complexes were systematically investigated. The (btmp)₂Ir(acac) (btmp = 2-benzo[b]thiophen-2-yl-4-methyl-pyridyl, acac = acetyl acetone) was characterized using X-ray crystallography. Calculation on the electronic ground state for (btmp)₂Ir(acac) was carried out using B3LYP density functional theory, HOMO levels are a mixture of Ir and btmp ligand orbitals, while the LUMO is predominantly btmp ligand based. Introduction of substituents (CH₃, CF₃) into pyridyl ring in a typical red emitter (btp)₂Ir(acac) leads to a marked decrease in the sublimation temperature, which is more suitable for OLEDs process. Electrochemical studies showed that (btmp)₂Ir(acac) has a slightly lower oxidation potential, but (btfmp)₂Ir(acac), (btfmp)₂Ir(dbm), and (btfmp)₂Ir(pic) (btfmp = 2-benzo[b]thiophen-2-yl-5-trifluoromethyl-pyridine, dbm = dibenzoylmethane, pic = 2-picolinic acid) containing CF₃ group are much difficult to oxidate than (btp)₂Ir(acac). The emission characteristics of these complexes can be tuned by either changing the substituents and their position on 2-benzo[b]thiophen-2-yl-pyridine or using different monoanionic ligands, showing emission λ_max values from 604 to 638 nm in CH₂Cl₂ solution at room temperature.     

DNA photocleavage activity of cobalt(III) polypyridyl complexes containing dpq ligand

Four cobalt(III) polypyridyl complexes, [Co(phen)_3−n(dpq)_n]³⁺ (phen = 1,10-phenanthroline, dpq = dipyrido[3,2-f:2′,3′-h]-quinoxaline) (n = 0, 1, 2, and 3) were synthesized and the influences of the dpq ligand on the photophysical properties, electrochemical properties, DNA binding affinities, as well as photonuclease activities of the complexes, were examined in detail. The presence of dpq ligand increases the DNA binding affinities of the corresponding complexes remarkably with respect to [Co(phen)₃]³⁺. With the sequential substitution of phen ligand by dpq ligand, the ¹O₂ quantum yields of the corresponding complexes are enhanced greatly. As a result, the photonuclease activities follow the order of [Co(dpq)₃]³⁺ > [Co(phen)(dpq)₂]³⁺ > [Co(phen)₂(dpq)]³⁺ ? [Co(phen)₃]³⁺. It was found all the examined complexes can generate OH upon UV irradiation, and OH is also involved in DNA photocleavage as reactive oxygen species.     

Synthesis of a novel tris-cyclometalated iridium(III) complex containing triarylamine unit and its application in OLEDs

The synthesis of the tris-cyclometalated iridium(III) complex [Ir(DCP)₃] (HDCP = 1-(N,N-diphenyl-amino)-4-(4-chlorophenyl)-phthalazine) from hydrated iridium(III) chloride and the ligand HDCP under mild reaction conditions was described. The photophysical, electrochemical and electrophosphorescent properties of this complex were investigated. Organic light-emitting diodes (OLEDs) using the complex as a dopant and a blend of poly(vinylcarbazole) (PVK) with 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazol (PBD) as a host exhibited bright red emission at 620 nm with the Commission Internationale de l’Eclairage (CIE) coordinate of (0.67, 0.32). A maximum external quantum efficiency of 13.6% photos/electron with a luminous efficiency of 7.4 cd/A at a current density of 0.73 mA/cm², and a maximum luminance of 2941 cd/m² at 99 mA/cm² were obtained in the device at 4 wt% doping concentration.     

Synthesis, DNA binding, photo-induced DNA cleavage, cytotoxicity and apoptosis studies of copper(II) complexes

Two new Cu(II) complexes, [Cu(acac)(dpq)Cl] () and [Cu(acac)(dppz)Cl] () (acac = acetylacetonate, dpq = dipyrido[3,2-d:20,30-f]quinoxaline, dppz = dipyrido[3,2-a:20,30-c] phenazine), have been synthesized and their DNA binding, photo-induced DNA cleavage activity and cell cytotoxicity are studied. The complexes show good binding propensity to calf thymus DNA in the order: 2(dppz) > 1(dpq). Furthermore, two complexes exhibit efficient DNA cleavage activity on natural light or UV-A (365 nm) irradiation via a mechanistic pathway involving formation of singlet oxygen as the reactive species. The photo-induced DNA cleavage activity of the dppz complex 2 is found to be more efficient than its dpq analogue. In vitro study of the photocytotoxicity of two complexes on HeLa cells indicate that both of them have the potential to act as effective anticancer drugs, with IC₅₀ values of 5.25 ± 0.83 μM (1) and 4.40 ± 0.52 μM (2) in the natural light, and 2.57 ± 0.92 μM (1) and 2.18 ± 0.52 μM (2) in UV-A light. In addition, to detect an apoptotic HeLa body, cells were stained with Hoechst 33342 dye.     

[Ir(acac)(η-C8H14)2]: A precursor in the synthesis of cyclometalated iridium(III) complexes

A new convenient synthesis and the crystallographic characterization of [Ir(acac)(coe)₂] (2, acac = acetylacetonato; coe = cis-cyclooctene) are described. The title compound crystallized from THF/ethanol in two modifications (monoclinic P2₁/c, 2a, and triclinic , 2b). Complex 2 represents an efficient starting material in the synthesis of mononuclear iridium(III) complexes containing cyclometalated 2-phenylpyridinato ligands using oxidative addition reactions of the corresponding ligands towards 2. Thus [Ir(acac)(ppy)₂] (3, ppy = 2-phenylpyridinato) and [Ir(ppy)₃] (4) (mer, 4a; fac, 4b) were prepared in excellent yields and short reaction times in a kind of one-pot procedure starting from [{Ir(μ-Cl)(coe)₂}₂] (1). Furthermore a convenient synthesis of [{Ir(μ-Cl)(ppy)₂}₂] (5) from 1 and Hppy is described.     

Synthesis, structures, electrochemistry and properties of dioxo-molybdenum(VI) and -tungsten(VI) complexes with novel asymmetric N2OS, and partially symmetric N2S2, NOS2N-capped tripodal ligands

A new class of asymmetric N-capped (dianionic/trianionic) tripodal proligands [H_x(Lⁿ)] (x = 2, n = 1-6; x = 3, n = 7, 8) which possess pendant arms with N₂OS, N₂S₂ or NOS₂ donor groups and with different chelate ring sizes {5,5,5} or {5,6,5} has been prepared. Treatment of these ligands with [WO₂Cl₂(dme)] (dme = 1,2-dimethoxyethane) in the presence of base (triethylamine or KOH) leads to the formation of cis-dioxotungsten(VI) complexes of the types [WO₂(Lⁿ)] (n = 1-6) and K[WO₂(Lⁿ)] (n = 7, 8). Reaction of these tetradentate ligands with [MoO₂(acac)₂] (acac = acetylacetonate) gives the corresponding Mo(VI) analogues [MoO₂(Lⁿ)] (n = 1-6) and K[MoO₂(Lⁿ)] (n = 7, 8). Moreover, a new five coordinate dioxomolybdenum(VI) complex with an NS₂ tridentate ligand [MoO₂(L⁹)] has been synthesised using similar procedure. All these compounds have been spectroscopically characterised and the molecular structures of [MoO₂(Lⁿ)] (n = 2, 6) and [WO₂(L⁶)] have been established by X-ray diffraction analysis. The electrochemistry and the catalytic activity for oxidation of allylic and benzylic alcohols of these dioxo complexes have also been investigated.     

Dinuclear organoiridium(III) mono- and bis-intercalators with rigid bridging ligands: Synthesis, cytotoxicity and DNA binding

The DNA binding and in vitro cytotoxicity of the dinuclear Ir(III) polypyridyl complexes [{(η⁵-C₅Me₅)Ir(dppz)}₂(μ-pyz)](CF₃SO₃)₄1 and [{(η⁵-C₅Me₅)Ir(pp)}₂(μ-4,4′-bpy)](CF₃SO₃)₄2-4 (pp = dipyrido[3,2-d:2′,3′-f]quinoxaline (dpq), dipyrido[2,3-a:2′,3′-c]phenazine (dppz), benzo[i]dipyrido[3,2-a:2′,3′-c]phenazine (dppn)) with the rigid bridging ligands pyrazine (pyz) or 4,4′-bipyridine (4,4′-bpy) have been studied. Stable intercalative binding into CT DNA (calf thymus DNA) is indicated for the dppz complexes 1 and 3 by induced negative CD bands at about 300 nm and large viscosity increases, with the individual measurements being in accordance with intrastrand bis-intercalation for 3 and mono-intercalation for 1. The observed interruption of specific interresidue NOE cross peaks from the relevant nucleobase H6/H8 protons to the sugar H2′/H2″ protons of the preceding nucleotide is in accordance with bis-intercalation of complex 3 between the C3G18 and G4C17 base pairs and the T5A16 and A6T15 base pairs of the decanucleotide d(5′-CGCGTAGGCC-3′). Complexes 1 and 3 exhibit a greatly improved uptake by HT-29 (colon carcinoma) cells and significantly improved in vitro IC₅₀ values of 1.8 ± 0.1 and 3.8 ± 0.1 μM towards this cell line in comparison to the mononuclear complex [(η⁵-C₅Me₅)IrCl(dppz)](CF₃SO₃) (IC₅₀ = 7.4 ± 0.9 μM).     

Reactions of ketones with coordinated nitriles on β-diketonato ruthenium complexes leading to formation of compounds with new carbon-carbon bonds

The reactions of [Ru(acac)₂(CH₃CN)₂] with four ketones (acetone, ethyl methyl ketone, acetylacetone and monochloroacetone), and the reactions of [Ru(acac)₂(C₆H₅CN)₂] with two ketones (acetone and ethyl methyl ketone) yielded six novel compounds of β-ketiminato ruthenium complexes: [Ru(acac)₂(mhmk)], [Ru(acac)₂(ehmk)], [Ru(acac)₂(mAmk)], [Ru(acac)₂(mClmk)], Ru(acac)₂(mhbk)], and [Ru(acac)₂(ehbk)] (mhmk = 4-iminopentane-2-one mono anion, ehmk = 5-iminohexane-3-one mono anion, mAmk = 3-(1-iminoethyl)-2,4-pentanedione mono anion, mClmk = 3-chloro-4-imino-pentane-2-one mono anion, mhbk = 1-phenyl-1-iminobutane-3-one mono anion, ehbk = 1-phenyl-1-iminopentane-3-one mono anion). All the new complexes have been characterized by elemental analyses, ¹H NMR, MS and electronic spectral data. Crystal and molecular structures for the six β-ketimine complexes have been solved by single crystal X-ray diffraction studies. A mechanism involving the attack of ketones on the coordinated nitrile has been proposed. The electrochemical redox behavior of the β-ketimine complexes has been elucidated.     

Tuning of emission: Synthesis, structure and photophysical properties of imidazole, oxazole and thiazole-based iridium (III) complexes

Three new iridium (III) complexes with two cyclometalated C^∧N ligands (imidazole, oxazole and thiazole-based, respectively) and one acetylacetone (acac) ancillary ligand have been synthesized and fully characterized. The structure of the thiazole-based complex has been determined by single crystal X-ray diffraction analysis. The Ir center was located in a distorted octahedral environment by three chelating ligands with the N-N in the trans and C-C in the cis configuration. By changing the hetero-atom of C^∧N ligands the order S, O and N, a marked and systematic hypsochromic shift of the maximum emission peak of the complexes was realized. The imidazole-based complex emits at a wavelength of 500 nm, which is in the blue to green region. The tuning of emission wavelengths is consistent with the variation of the energy gap estimated from electrochemistry results. An electroluminescent device using the thiazole-based complex as a dopant in the emitting layer has been fabricated. A highly efficient yellow emission with a maximum luminous efficiency of 9.8 cd/A at a current density of 24.2 mA/cm² and a maximum brightness of 7985 cd/m² at 19.6 V has been achieved.     

Synthesis and characterization of the novel extended TTF-type donors with thiophenic units

Two new TTF-based donors that are dithiolene ligand precursors, 3-{5-[(2-cyanoethyl)thio]-2-(5,6-dihydrothieno[2,3-d][1,3]dithiol-2-ylidene-1,3-dithiol-4-yl)thio}propanenitrile, dtdt (1) and 3-({5-[(2-cyanoethyl)thio]-2-thieno[2,3-d][1,3]dithiol-2-ylidene-1,3-dithiol-4-yl)thio}propanenitrile, α-tdt (2), were synthesized and characterized. The electrochemical properties of these compounds were studied by cyclic voltammetry (CV) in acetonitrile. Compound 1 shows two reversible oxidation process at ¹E_1/2 = 0.639 V and ²E_1/2 = 0.997 V versus Ag/AgCl. This same processes occurs at ¹E_1/2 = 0.612 V and ²E_1/2 = 0.906 V in the case of 2. The crystal structures confirm the ability of these molecules to establish interactions with their neighbours through the peripheral sulfur atoms.     

Synthesis of novel mononuclear and dinuclear ruthenium(II) complexes with terpyridine and acetylacetonate ancillary ligands and cyanamide derivative ligands

Several new mononuclear and dinuclear ruthenium(II) complexes - incorporating 2,2′:6′,2″-terpyridine and acetylacetonate as ancillary ligands and phenylcyanamide derivative ligands - of the type [Ru(tpy)(acac)(L)] and [{Ru(tpy)(acac)}₂(μ-L′)] (where tpy = 2,2′:6′,2″-terpyridine, acac = acetylacetonate, L = hmbpcyd = 4-(3-hydroxy-3-methylbutynyl)phenylcyanamide anion (2) and epcyd = 4-ethynylphenylcyanamide anion (3) and L′ = bcpda = bis(4-cyanamidophenyl)diacetylene dianion (4) and bcpea = 9,10-bis(4-cyanamidophenylethynyl)anthracene dianion (5)) were synthesized in a stepwise manner starting from [Ru(tpy)(acac)(Ipcyd)] (1), where Ipcyd = 4-iodophenylcyanamide anion. Tetraphenylarsonium salts of the phenylcyanamide derivative ligands were also prepared. The four complexes have been characterized by UV-Vis, IR, ES-MS, electrochemistry and ¹H NMR. Mononuclear complexes 2 and 3 were further characterized by ¹³C NMR. The single crystal X-ray structure of 2 was determined, it crystallized with one molecule of water with empirical formula of C₃₂H₃₁N₅O₅Ru, in a monoclinic crystal system and space group of P2₁/n with a = 17.642(5) Å, b = 9.634(2) Å, c = 20.063(7) Å, β = 92.65(3)°, V = 3406(2) Å³ and Z = 4. The structure was refined to a final R factor of 0.040. The Ru(III/II) couple of 1-3 appeared around 0.34 V versus the saturated calomel electrode in dimethylformamide and at a slightly higher potential, around 0.36-0.37 V for 4 and 5. Spectroelectrochemical studies were also performed for 4 and 5, no intervalence transition was observed despite all attempts.     

Synthesis and characterization of CpMCl(PR3)(S or W-η-butadienesulfonyl) compounds of rhodium and iridium

A metathesis reaction of [Cp^∗MCl₂(PR₃)] [M = Rh, R = Ph (1), Me (3); M = Ir, R = Ph (2), Me (4)] takes place in the presence of potassium butadienesulfinate (SO₂CHCHCHCH₂)K (9) to afford the mononuclear compounds [Cp^∗M(Cl)(PR₃)(η¹-SO₂CHCHCHCH₂)] [M = Rh, R = Ph (11S), (11W); M = Rh, R = Me (13S), (13W)] and [M = Ir, R = Ph (12S); M = Ir, R = Me (14S), (14W)] under different reaction conditions. The addition of PR₃ (R = Ph, Me) to Cp^∗Ir(Cl)[(1,2,5-η)-SO₂CHCHCHCH₂] (7) affords the corresponding iridium isomers 12S, 12W and 14S, in a non-selective reaction, along with the corresponding dichloride compounds 2 or 4. The ¹H and ¹³C{¹H} NMR data are consistent with the butadienesulfonyl ligands coordinated exclusively through the sulfur atom, and they show the presence of two isomers, described as the S and W conformers, which can be isolated separately. There is clear evidence that these isomers correspond to the kinetic and thermodynamic derivatives, respectively.     

Synthesis and characterization of mixed-ligand ruthenium(III) complexes with oxalate and acetylacetonate ions

Two mononuclear mixed-ligand ruthenium(III) complexes with oxalate dianion (ox²⁻) and acetylacetonate ion (2,4-pentanedionate, acac⁻), K₂[Ru(ox)₂(acac)] (1) and K[Ru(ox)(acac)₂] (2), were prepared as a candidate for a building block. In fact, reaction of complex 2 with manganese(II) sulfate gave a heterometallic tetranuclear complex, TBA[Mn^II{(μ-ox)Ru^III(acac)₂}₃] (5) in the presence of tetrabutylammonium (TBA) bromide. The ¹H NMR, UV-Vis, selected IR and FAB mass spectral data of these complexes are presented. Both mixed-ligand ruthenium(III) complexes gave a Nernstian one-electron reduction step in 0.1 mol dm⁻³ Na₂SO₄ aqueous solution on a mercury electrode at 25 °C. Comparison of observed reversible half-wave potentials with calculated values for a series of [Ru(ox)_n(acac)_3 − n]ⁿ⁻ (n=0-3) complexes by using Lever’s ligand electrochemical parameters is presented.     

Synthesis and structural characterization of adducts of silver(I) carboxylate salts AgX (X = CF3COO, CH3COO) with ER3 (E = P, As; R = Ph, cy, o-tolyl) and oligodentate aromatic bases derivative of 2,2′-bipyridyl, L, AgX:PR3:L (1:1:1)

Twenty-one adducts of the form AgX:ER₃:L (1:1:1) (X = CF₃COO (‘tfa’), CH₃COO (‘ac’), E = P, As; R = Ph, cy, o-tolyl; L = 2,2′-bipyridyl (‘bpy’)-based ligand) have been synthesized and characterized by analytical, spectroscopic (IR, far-IR, ¹H, ¹⁹F and ³¹P NMR) and single crystal X-ray diffraction studies. The resulting complexes are predominantly of the form [(R₃E)AgL]⁺X⁻, with a trigonal EAgN₂ coordination environment, the planarity of which may be perturbed by the approach of anion or solvent. The carboxylate anions have been found to be uni-, or semi-bidentate, or also completely ionic, as in the complexes [Ag(PPh₃)(bpy)(H₂O)](tfa) and [Ag(PPh₃)(dpk · H₂O)](tfa) (‘dpk · H₂O’ = bis(2-pyridyl)ketone (hydrated)). The complexes Agac:PPh₃:dpa (1:1:1) and Agac:P(o-tol)₃:dpa:MeCN (1:1:1:1) are dinuclear, with bridging unidentate acetate and terminal unidentate dpa (‘dpa’ = bis(2-pyridyl)amine).     

Synthesis and isocyanate insertion reactions of tungsten(IV) imido complexes formed from W(CO)(acac)(N3)(PMe3)3 with azide as the oxidant

Addition of excess trimethylphosphine and a halide source to a solution of W(CO)(acac)₂(η²-L) (L = NCPh and OCMe₂) leads to displacement of L and one acetylacetonate chelate to produce electron-rich, seven-coordinate complexes of the formula W(CO)(acac)(X)(PMe₃)₃ (X = Cl, Br, and I). Use of NaN₃ instead of a halide source leads primarily to loss of carbon monoxide and dinitrogen, and protonation from adventitious water yields the cationic imido complex [W(NH)(acac)(PMe₃)₃]⁺. Heating [W(NH)(acac)(PMe₃)₃]⁺ in aromatic isocyanates at high temperature results in isocyanate insertion into the NH imido bond to form new C-N bonds. An alternate route to related imido complexes involves heating [W(O)(acac)(PMe₃)₃]⁺ with phenyl isocyanate at high temperatures to yield the substituted imido complex [W(NPh)(acac)(PMe₃)₃]⁺.     

p-Quinquephenyl diamine, C6H5-p-C6H4-p-C6H2(2,3-NH2)-p-C6H4-C6H5, and its corresponding diimine-Ru(II) complex: Crystal structure and electrochemical and optical properties

The molecular structure of an o-phenylenediamine unit-containing oligophenylene (1), Ph-Ph′-Ph′(2,3-NH₂)-Ph′-Ph (Ph = phenyl; Ph′ = p-phenylene; Ph′(2,3-NH₂) = 2,3-diamino-p-phenylene), was determined by X-ray crystallography. 1 has a twisted structure, and forms an intermolecular C-H?π interaction network. The -NH₂ group of 1 was air-oxidized to an imine, NH, group in the presence of [RuCl₂(bpy)₂] (bpy = 2,2′-bipyridyl) and gave a ruthenium(II)-benzoquinone diimine complex [Ru(2)(bpy)₂](PF₆)₂ (2: Ph-Ph′-Ph′(2,3-imine)-Ph′-Ph). The molecular structure of [Ru(2)(bpy)₂](PF₆)₂ was confirmed by X-ray crystallography. [Ru(2)(bpy)₂](PF₆)₂ underwent two-step electrochemical reduction with E^1/2 = −0.889 V and −1.531 V versus Fc⁺/Fc. The E^1/2’s were located at higher potentials by 91 mV and 117 mV, respectively, than those of reported [Ru(bqdi)(bpy)₂](PF₆)₂ (bqdi = benzoquinone diimine). Electrochemical oxidation of [Ru(2)(bpy)₂](PF₆)₂ occurred at a lower potential by 180 mV than that of [Ru(bqdi)(bpy)₂](PF₆)₂. Occurrence of the easier reduction and oxidation of [Ru(2)(bpy)₂](PF₆)₂ than those of [Ru(bqdi)(bpy)₂](PF₆)₂ is ascribed to the presence of a large π-conjugation system in 2.     

Directing iridium-catalyzed C-C bond formation by selection of the ancillary ligands: Polymerization and cyclotrimerization of alkynes

The ability of organoiridium derivatives of catalyzing oligomerization and polymerization of terminal alkynes is markedly influenced by the nature of non-participative ligands coordinated to the metal. The dimeric species [Ir(cod)Cl]₂ and [Ir(cod)(OMe)]₂ (cod = 1,5-cyclooctadiene) as well as the phosphine complexes HIr(cod)(PR₃)₂ (PR₃ = PPh₃, P(p-MeOC₆H₄)₃, P(o-MeOC₆H₄)Ph₂, PCyPh₂) catalyze the polymerization reaction, whereas the diphosphine derivatives HIr(cod)(P-P) (P-P = Ph₂P(CH₂)_nPPh₂ (n = 1-4), o-C₆H₄(PPh₂)₂) promote the regioselective formation of 1,2,4-trisubstituted benzenes. On the other hand, the iridium complexes with nitrogen chelating ligands Ir(cod)(N-N)X and Ir(hd)(N-N)X (hd = 1,5-hexadiene; N-N = 1,10-phenanthroline and substituted derivatives; X = halogen) catalyze alkynes polymerization. In most cases one catalytic reaction predominates over the other possible routes, so that polymerization often takes place in the absence of oligomerization side reactions, and conversely cyclotrimerization is rarely accompanied by formation of either polyene or dimers.     

Synthesis and characterization of [Fe(III)(qsal)2][M(III)(pds)2] (M = Cu, Au)

Salts of the Fe(III) spin crossover cation [Fe^III(qsal)₂]⁺ (qsalH = N-(8-quinolyl)salicylaldimine) and monoanions [M^III(pds)₂]⁻ (M = Cu, Au; pds = pirazine-2,3-diselenolate) with formula [Fe^III(qsal)₂][M^III(pds)₂] were prepared and characterized by single crystal X-ray diffraction and magnetic measurements. These two salts present magnetic properties essentially due to the Fe^III centres in the high-spin state (S = 5/2), and do not have any spin transition.     

Chemistry at the apical position of square-pyramidal copper(II) complexes: Synthesis, crystal structures, and magnetic properties of homopolynuclear complexes with azido bridges containing [Cu(AA)(BB)] moieties (AA = acetylacetonate; BB = 1,10-phenanthroline, bipy = 2,2′-bipyridine)

Three new homopolynuclear complexes with azido bridges have been obtained by using [Cu(AA)(BB)]⁺ building-blocks (AA = acetylacetonate; BB = 1,10-phenanthroline or 2,2′-bipyridine). The reaction between [Cu(acac)(phen)(H₂O)](ClO₄) and NaN₃ leads to a mixture of two compounds: a binuclear complex, [{Cu(acac)(phen)}₂(μ_1,3-N₃)](ClO₄) · 2H₂O (1), and a linear tetranuclear one, [{Cu(acac)(phen)(ClO₄)}₂{Cu(phen)(μ_1,1-N₃)₂}₂] (2). The reaction between [Cu(acac)(bipy)(H₂O)](ClO₄) and NaN₃ affords also a mixture of two compounds: [{Cu(acac)(bipy)}₂(μ_1,3-N₃)]₃(ClO₄)₃ · 3.75H₂O (3) and [Cu(acac)(bipy)(N₃)][Cu(acac)(bipy)(H₂O)](ClO₄) (4). The X-ray crystal structures of compounds 1-4 have been solved (for compound 4 the crystal structure was previously reported). In compounds 1 and 3, two {Cu(AA)(BB)} fragments are bridged by the azido anion in an end-to-end fashion. Two isomers, cis and trans with respect to azido bridge, were found in crystal 3. The structure of compound 2 consists of two Cu(II) central cations bridged by two μ_1,1-azido ligands, each of them being also connected to a {Cu(acac)(phen)} fragment through another μ_1,1-azido ligand. The cryomagnetic properties of the compounds 1 and 2 have been investigated and discussed. The magnetic behaviour of compound 1 shows the absence of any interactions between the metallic ions. In the tetranuclear complex 2, the magnetic interactions between the external and central copper(II) ions(J₁), and between the central metallic ions (J₂) were found ferromagnetic (J₁ = 0.36 cm⁻¹, J₂ = 7.20 cm⁻¹).