Synthesis, reactivities and catalytic carbonylation of rhodium(I) carbonyl complexes containing isomeric acetylpyridine ligands

[Rh(CO)₂Cl]₂ reacts with two mole equivalent of 2-acetylpyridine (a), 3-acetylpyridine (b) and 4-acetylpyridine (c) to afford chelate [Rh(CO)Cl(η²-N∩O)] (1a) and non-chelate [Rh(CO)₂Cl(η¹-N∼O)] (1b, 1c) complexes, where, N∩O = a, N∼O = b, c. Oxidative addition (OA) of 1a-1c with CH₃I and C₂H₅I yields penta coordinate rhodium(III) complexes, [Rh(COR)ClI(η²-N∩O)] {R = -CH₃ (2a); -C₂H₅ (3a)} and [Rh(COR)(CO)ClI(η¹-N∼O)] {R = -CH₃ (2b, 2c); -C₂H₅ (3b, 3c)}. Kinetic study for the reaction of 1a-1c with CH₃I indicates a pseudo-first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester was evaluated at different initial CO pressures 5, 10 and 20 bar at ∼25 °C and higher turn over numbers (TON = 1581-1654) were obtained compared to commercial Monsanto’s species [Rh(CO)₂I₂]⁻ (TON = 1000) under the reaction conditions: temperature = 130 ± 1 °C, pressure = 15-32 bar, rpm = 450, time = 1 h and catalyst: substrate = 1: 1900.     

Oxidative addition of methyl iodide to [Rh(CH3COCHCOCH3)(CO)(P(OCH2)3CCH3)]

The reaction rate of the oxidative addition and the following CO insertion step of methyl iodide with [Rh(acac)(CO)(P(OCH₂)₃CCH₃)] is determined. The key finding is that while [Rh(acac)(CO)(P(OCH₂)₃CCH₃)] oxidatively adds methyl iodide ca 300 times faster than the Monsanto catalyst, the CO insertion step is much slower. However, the rate-determining step of the oxidative addition reaction of the phosphorus-containing acetylacetonato-rhodium(I) complex, the carbonyl insertion step, is still in the same order or faster than the rate-determining oxidative addition step of iodomethane to [Rh(CO)₂I₂]⁻.     

New highly water-soluble rhodium complexes bearing 1,3,5-triaza-7-phosphaadamantane (PTA) and/or tris(hydroxymethyl) phosphine (THP)

A family of cationic and neutral highly water-soluble rhodium complexes [Cp∗Rh(PTA)₃]Cl₂ (1), [Cp∗RhCl₂(THP)] (2), [Cp∗RhCl(THP)₂]Cl (3), and [Cp∗RhCl(PTA)(THP)]Cl (4) have been synthesised and fully characterised [PTA = 1,3,5-triaza-7-phosphaadamantane; THP = tris(hydroxymethyl)phosphine]. Their water-solubility increases as the number of the phosphines coordinated to the metal centre is increased. The X-ray crystal structure of compound 2 was obtained and shows the presence of intermolecular hydrogen bonding. NMR speciation studies of [Cp∗RhCl₂(PTA)] in deuterated water show the existence of several equilibria involving substitution processes in which the water molecules can substitute both chloride and PTA ligands.     

Tripodal oxygen and tripodal nitrogen ligands in hydroformylation reactions: formation of novel rhodium(III) carbonyl bis(acyl) complexes

The rhodium(I) complexes TpmsRh(CO)₂ (1) and TpmsRh(cod) (2) of the tripodal nitrogen ligand tris(pyrazolyl)methanesulfonate, Tpms⁻=[(pz)₃CSO₃]⁻, catalyze the hydroformylation of 1-hexene. Addition of phosphine has a negative effect on the activity. The hydroformylation activity reaches a maximum at about 60 °C. At temperatures above 80 °C hydrogenation becomes an important secondary reaction. When the catalysis is performed at 60 °C in acetone with 1 or 2 as catalyst precursor all of the rhodium is recovered in the form of the rhodium(III) bis(acyl) complex TpmsRh(CO)(COC₆H₁₃)₂ (9). A similar behaviour is observed with rhodium(I) complexes bearing the tripodal oxygen ligand L_OMe⁻=[(cyclopentadienyl)tris(dimethylphosphito-P) cobalt O,O^′,O″]⁻. In this case all of the rhodium is transformed into L_OMeRh(CO)(COC₆H₁₃)₂ (10). These hitherto unknown bis(acyl) rhodium(III) complexes show the same catalytic activity as the rhodium(I) starting compounds.     

Equilibrium, solid state behavior and reactions of four and five co-ordinate carbonyl stibine complexes of rhodium. Crystal Structures of trans-[Rh(Cl)(CO)(SbPh3)2], trans-[Rh(Cl)(CO)(SbPh3)3] and trans-[Rh(I)2(CH3)(CO)(SbPh3)2]

The crystal structures of the four-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₂] (1) and the five-coordinate trans-[Rh(Cl)(CO)(SbPh₃)₃] (2) are reported, as well as the unexpected oxidative addition product, trans-[Rh(I)₂(CH₃)(CO)(SbPh₃)₂] (3), obtained from the reaction of 2 with CH₃I. The formation constants of the five-coordinate complex were determined in dichloromethane, benzene, diethyl ether, acetone and ethyl acetate as 163±8, 363±10, 744±34, 1043±95 and 1261±96 M⁻¹, respectively. While coordinating solvents facilitate the formation of the five-coordinate complex, the four-coordinate complex could be obtained from diethyl ether due to the favorable low crystallization energy. The tendency of stibine ligands to form five-coordinate rhodium(I) complexes is attributed mainly to electron deficient metal centers in these systems, with smaller contributions by the steric effects. The average effective cone angle for the SbPh₃ ligand in the three crystallographic studies was determined as 139° with individual values ranging from 133 to 145°.     

A rhodium(I) complex containing a mixed donor `P2N' tridentate ligand

The reaction of 2-(diphenylphosphino)-N-[2-(diphenylphosphino)benzylidene]benzeneamine (PNCHP) with 0.5 equivalents of [{RhCl(1,5-cyclooctadiene)}₂] affords the extremely, air-sensitive compound, [RhCl(PNCHP-κ³P,N,P)]. This reacts with carbon monoxide to afford [RhCl(CO)(PNCHP-κ³P,N,P)] which rearranges in dichloromethane solution to [Rh(CO)(PNCHP-κ³P,N,P)]Cl · HCl. The single crystal structure of [Rh(CO)(PNCHP-κ³P,N,P)]Cl · HCl shows the Rh to be in a square planar environment with the HCl molecule held via hydrogen bonding in the lattice. NMR experiments show the coordinated chloride in [RhCl(PNCHP-κ³P,N,P)] can be substituted with tetrahydrofuran, acetonitrile or triphenylphosphine and the complex undergoes oxidative addition with dichloromethane to yield [Rh(CH₂Cl)Cl₂(PNCHP-κ³P,N,P)].     

Optically active iridium complexes with cyclopentadienyl-phosphine ligands: synthesis and oxidative addition of methyl iodide

The dimer [Ir(μ-Cl)(C₈H₁₄)₂]₂ reacts with the ligands (S)-(C₅H₄CH₂CH(Ph)PPh₂)Li and (R)-(C₅H₄CH(Cy)CH₂PPh₂)Li to give (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(C₈H₁₄)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(C₈H₁₄)], which upon treatment with CH₃I at room temperature afford the cationic iridium(III) compounds (S,S_Ir)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a single diastereomer, and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(C₈H₁₄)][I] as a 9:1 mixture of two diastereomers. If the oxidative addition reaction is performed at reflux in methylene chloride, the starting complexes convert to the neutral compounds (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(I)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(I)] as 1.6:1 and 3.3:1 mixtures of diastereoisomers, respectively. Carbonyl iridium complexes are synthesized by reacting [IrCl(CO)(PPh₃)₂] with the ligands to afford (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CO)] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CO)]. They give upon treatment with CH₃I the cationic species (S)-[Ir(η⁵-C₅H₄CH₂CH(Ph)PPh₂-κP)(CH₃)(CO)][I] and (R)-[Ir(η⁵-C₅H₄CH(Cy)CH₂PPh₂-κP)(CH₃)(CO)][I] as 1.6:1 and 3:1 mixture of diastereomers, respectively. No migratory-insertion of the methyl group into the carbonyl-metal bond has been observed even after prolonged heating.     

New acylhydridorhodium(III) complexes containing terdentate PNN ligands from the reaction of diolefinic rhodium(I) complexes with o-(diphenylphosphino)benzaldehyde in the presence of chelating amino ligands

[{Rh(cod)Cl}₂] (cod=1,5-cyclooctadiene) reacts with o-(diphenylphosphino)benzaldehyde (PPh₂(o-C₆H₄CHO)) (Rh:P=1:1) in the presence of aromatic diamines or 8-aminoquinoline (NN) to give acylhydride [Rh(Cl)(H){PPh₂(o-C₆H₄CO)}(NN)] species. The oxidative addition of PPh₂(o-C₆H₄CHO) in the presence of (NN) and PPh₃ gives cationic species [Rh(H){PPh₂(o-C₆H₄CO)} (PPh₃)(NN)]⁺ containing mutually trans phosphorus atoms. When (NN)=8-aminoquinoline, a mixture of two isomers is obtained. These isomers differ in the nitrogen cis to the hydride, amino or quinolinic. By using Rh:PPh₂(o-C₆H₄CHO)=1:2 stoichiometric ratios, oxidative addition of one PPh₂(o-C₆H₄CHO) and P-coordination of another PPh₂(o-C₆H₄CHO) occurs. The aldehyde group undergoes then a condensation reaction with the coordinated amine to afford new PNN terdentate ligands, phosphine-amino-imine when (NN)=diamine or phosphine-diimine when (NN)=8-aminoquinoline. These reactions give selectively the corresponding complexes [Rh(H){PPh₂(o-C₆H₄CO)}(PNN)]⁺ containing trans phosphorus atoms and the hydride cis to the new imino group. X-ray diffraction studies of the PNN complexes are reported.     

Synthesis and characterisation of ferrocene-containing β-diketonato complexes of rhodium(I) and rhodium(III)

The synthesis of new β-diketonato rhodium(I) complexes of the type [Rh(FcCOCHCOR)(CO)₂] and [Rh(FcCOCHCOR)(CO)(PPh₃)] with Fc=ferrocenyl and R=Fc, C₆H₅, CH₃ and CF₃ are described. ¹H, ¹³C and ³¹P NMR data showed that for each of the non-symmetric β-diketonato mono-carbonyl rhodium(I) complexes, two isomers exist in solution. The equilibrium constant, K_c, which relates these two isomers in an equilibrium reaction, are concentration independent but temperature and solvent dependent. Δ_rG, Δ_rH and Δ_rS values for this equilibrium have been determined and a linear relationship between solvent polarity on the Dimroth scale and K_c exists. The relationship between RhP bond lengths, d(RhP), and ³¹P NMR peak positions as well as coupling constants ¹J(³¹P¹⁰³Rh) has been quantified to allow calculation of approximate d(RhP) values. Variations in d(RhP) for [Rh(RCOCHCOR′)(CO)(PPh₃)] complexes have also been related to the group electronegativities (Gordy scale) of the terminal β-diketonato R groups trans to PPh₃. A measure of the electron density on the rhodium centre of [Rh(RCOCHCOR′)(CO)(PPh₃)] may be expressed in terms of the IR carbonyl stretching wave number, ν(CO), the sum of the group electronegativities of the R and R′ groups, (χ_R+χ_R′), or the observed pK_a^′ values of the free β-diketones RCOCH₂COR^′. An empirical relationship between ν(CO) and either pK_a^′ or (χ_R+χ_R′) has also been quantified.     

Synthesis, spectroscopy, and structures of new rhodium(I) and rhodium(III) corroles and catalysis thereby

The syntheses and molecular structures of six- and five-coordinated rhodium(III) corroles (by pyridines and a chiral amine, respectively) and the rhodium(I) complex of a chiral corrole are described, together with some interesting features in the NMR spectra of the complexes and their utilization as carbene-transfer catalysts.     

A potential rhodium cancer therapy: Studies of a cytotoxic organorhodium(I) complex that binds DNA

Described is a novel organorhodium(I) complex that is cytotoxic to the colon cancer cell line HCT116 and alters cell migration, DNA replication, and DNA condensation. Most importantly, the mechanism observed is not seen for the parent organorhodium dimer complex [{RhCl(COD)}₂], RhCl₃, or the free ligand/proligands (COD and 1-ⁿbutyl-3-methylimidazolium chloride). Thus, the activity of this organorhodium complex is attributable to its unique structure.     

Synthesis and characterization of cationic rhodium(I) dicarbonyl complexes

Treatment of Rh(acac)(CO)₂ (acac = acetoacetonate) with perchloric acid followed by addition of an α-diimine (α-diimine = 1,4-bis(Ar)-2,3-dimethyl-1,4-diaza-1,3-butadiene, Ar = 3,5-dimethylphenyl, 1; 3,5-di-tert-butylphenyl, 2; and 3,4,5-trimethoxyphenyl, 3; phenyl, 4; and 4-chlorophenyl, 5) generates a series of complexes of the type [Rh(α-diimine)(CO)₂][ClO₄] 6-10 with varying electronic properties of the supporting diimine ligand. X-ray crystal structures have been determined for the α-diimine ligands 1-5, and complexes 6, 8, and 10.     

Chemistry of tris(2,4,6-trimethoxyphenyl)phosphine with rhodium(I) and iridium(I) olefin complexes

Rh(I) and Ir(I) complexes of the type [Rh(cod)(η²-TMPP)]¹⁺ (1) and M(cod)(η²-TMPP-O) (M = Rh (2), Ir (3); cod = cyclooctadiene; TMPP = tris(2,4,6-trimethoxyphenyl)phosphine; TMPP-O = mono-demethylated form of TMPP) have been isolated from reactions of [M(cod)Cl]₂ with M′BF₄ (M′ = Ag⁺, K⁺, Na⁺) followed by addition of the tertiary phosphine ligand. This chemistry is dependent on the identity of the metal, as both the cationic phosphine complex and the neutral phosphino-phenoxide compound are stable for Rh(I), whereas only the latter is stable for Ir(I). The three complexes have been characterized by IR and NMR (¹H and ³¹P) spectroscopies as well as by cyclic voltammetry. The ¹H NMR spectrum of [Rh(cod)(η²-TMPP)]¹⁺ (1) is in accord with the formula and reveals that the TMPP phenyl rings are undergoing rapid exchange between coordinated and non-coordinated modes; the corresponding spectra of 2 and 3 support free rotation about the P---C bonds of the unbound phenyl rings with no fluxionality of the bound demethylated ring. The ³¹P{¹H} NMR spectrum of the neutral species 2 exhibits a significant upfield shift with respect to the analogous cationic compound 1. This shielding is the result of improved electron donation to the metal from a phenoxide group as compared to an ether substituent. In situ addition of CO to the reaction between TMPP and [Rh(cod)Cl]₂ or [Ir(cod)Cl]₂ in the presence of M′BF₄ results in the isolation of the monocarbonyl species [Rh(TMPP)(η²-TMPP)(CO)][BF₄] (5) and the stable dicarbonyl compound [Ir(TMPP)₂(CO)₂][BF₄] (4), respectively. Single crystal X-ray data for

Full-size image

. The geometry of 4 is square planar, with essentially ideal angles for the mutually trans disposed phosphine and carbonyl ligands, as found in earlier studies for the analogous Rh dicarbonyl compound. The ¹H NMR spectrum of 4 supports the assignment of magnetically equivalent phosphorus nuclei in solution. The results of this study indicate that cyclooctadiene is a particularly strong ligand for monovalent late transition metals ligated by TMPP, to the extent that it is inert with respect to substitution in the absence of π-acceptor ligands such as carbon monoxide.     

Transformations of the Vaska-type complex trans-[RhCl(CO)(PTA)2] (PTA = 1,3,5-triaza-7-phosphaadamantane) during stepwise addition of HCl: Synthesis, characterization and crystal structure of trans-[RhCl2(PTA)(PTAH)]

The new aqua-soluble rhodium(I) complex trans-[RhCl₂(PTA)(PTAH)] (1) {PTAH = N-protonated form of 1,3,5-triaza-7-phosphaadamantane (PTA)} has been synthesized via the reaction of trans-[RhCl(CO)(PTA)₂] with aqueous HCl or N-chlorosuccinimide, or by the treatment of RhCl₃ with PTA. Compound 1 has been characterized by IR, ¹H and ³¹P{H} NMR spectroscopies, ESI-MS(+), elemental and single crystal X-ray diffraction analyses, the latter showing a square planar {RhCl₂P₂} geometry. Besides, the stepwise addition of diluted HCl to an aqueous solution of trans-[RhCl(CO)(PTA)₂] has been monitored by ³¹P{¹H} NMR and ESI-MS(+) techniques, allowing to detect a number of intermediate Rh(I) species.     

Synthesis and properties of a highly soluble dihydoxo(tetra-tert-butylphthalocyaninato)antimony(V) complex as a precursor toward water-soluble phthalocyanines

The title complex cation, [Sb(tbpc)(OH)(2)](+) (where tbpc denotes tetra(tert-butyl)phthalocyaninate, C(48)H(48)N(8)(2-)), has been prepared by oxidizing [Sb(tbpc)]I(3) with tert-butyl perbenzoate in CH(2)Cl(2), CHCl(3), o-dichlorobenzene and also without solvent in the range of 20-80 degrees C. This species has been isolated as I(3)(-) salt and characterized by elemental analysis, ESI-MS, FT-IR, optical absorption and emission, and magnetic circular dichroism spectroscopy. This compound is quite well soluble in common polar organic solvents (e.g., CH(2)Cl(2), acetonitrile, acetone) without detectable aggregation at least up to ca. 10(-4)M while much less soluble (e.g., benzene, chloronaphthalene) or insoluble (hexane) in non-polar solvents. Although this compound is insoluble in water, it makes hydrophilic colloids in acetone-water mixtures. The most intense absorption band (Q-band) in a specific solvent red-shifts with an increase in the refractive index of the solvent. However, considerable deviation of the Q-band positions in donor-solvents from linear correlation between the positions and Onsager's solvent polarity function suggests that there are significant specific chemical interactions between the axial hydroxyl groups and the surrounding donor molecules. The low fluorescence quantum yield (ca. 0.01) for [Sb(tbpc)(OH)(2)](+) suggests that the singlet excited state of this species is considerably quenched by the presence of antimony ion in the chromophore.     

Rhodium(I) complexes with phosphinooxathiane (POT) and phophinooxazolidine (POZ) ligands: the crystal structures of [(POT)Rh(CO)Cl] and [(POZ)Rh(CO)Cl]

The reactions of two equivalents of the ligands POT or POZ with one equivalent of the rhodium complex [Rh(μ-Cl)(CO)₂]₂ afford the complexes [(POT)Rh(CO)Cl] (1) and [(POZ)Rh(CO)Cl] (2), respectively. The crystal structures of both complexes have been determined showing the rhodium centers to be into slightly distorted square planar environments. Preliminary screening of the catalytic systems POT/Rh and POZ/Rh in the asymmetric hydroformylation of styrene has been carried out.     

Oxidative addition of the C-O bond of amino acid esters to Rh(I) forming chelating acyl complexes

Esters of N-acylated amino acids and the sterically demanding phosphine 2-(di-ortho-tolylphosphino)phenol react within 1 h at room temperature with the Rh(I) centers of [Cl(μ-Cl)Rh(cyclooctene)₂]₂ to give products of oxidative addition of the ester carbonyl-O bond. The N-acyl carbonyl oxygen is bound to the Rh in these initial adducts, but is displaced upon addition of PMe₃, PhPMe₂, NH₂NMe₂, or the thioether function of a methionine derivative. Remarkably, both initial products from achiral amino acids and their ligand adducts are formed as single five-coordinate diastereomers in essentially quantitative yields. However, asymmetric induction by chiral amino acid derivatives of proline and phenylalanine on the stereochemistry at Rh was modest. Finally, the identities of infrared absorptions of acyl and amide groups in the complexes were established unequivocally by synthesis and spectroscopy of N-acetylglycine esters with a ¹³C label at either the ester or amide carbonyl group.     

First- and second-order mechanisms for oxidative addition for bound methyl disulfide in the complex W(CO)3(phen)(MeSSMe)

The rate of oxidative addition of methyl disulfide in the complex W(CO)₃(1,10-phenanthroline) (MeSSMe) in methylene chloride has been studied. The dominant reaction pathway is second order in metal complex and inhibited by excess methyl disulfide. Formation of a dinuclear complex [W(CO)₃(phen)]₂(MeSSMe) is proposed to lead to the transition state for cleavage of the sulfur-sulfur bond in the second-order mechanism. In neat methyl disulfide, or in concentratred solutions of methyl disulfide at low metal complex concentrations, the reaction occurs at reduced rate and follows a first-order mechanism. Addition of Mo(CO)₃(1,10-phenanthroline) (MeSSMe) to the corresponding tungsten complex results in a ten-fold increase in the rate of oxidative addition of the tungsten complex and production of Mo(CO)₄(1,10-phenanthroline) as the sole molybdenum-containing product. The faster rate of reaction in the presence of the molybdenum complex is attributed to the faster formation of the heteronuclear dinuclear intermediate by initial loss of MeSSMe from the molybdenum versus tungsten center. Additional kinetic/mechanistic studies are described using a new flow-through FT-IR/microscope reaction system designed to allow convenient monitoring of small quantities of sensitive/hazardous reactants.