One-dimensional copper(II) coordination polymers based on carboxylate anions and rigid pyridyl-donor ligands

Two copper(II) compounds named [Cu₂(μ-O₂CCH₂C₄H₃S)₄(bipy)]_n (1) and [Cu₂(O₂CCH₂C₄H₃S)₄(bpe)₂]_n (2) [(O₂CCH₂C₄H₃S) = 3-thiopheneacetate anion; bipy = 4,4′-bipyridine and bpe = 1,2-bis(4-pyridyl)ethylene] have been synthesized and structurally characterized by single crystal X-ray diffraction analysis. Compound 1 consists of binuclear paddle wheel SBUs connected by bridging bipy ligands resulting on a 1D polymeric chain. On the other hand, compound 2 contains two crystallographically independent copper(II) centers coordinated by 3-thiopheneacetate ions in a monodentate fashion and by bpe ligands acting in a bridging mode to form 1D polymeric chains. In both cases, the 1D polymeric chains are linked through non-classical hydrogen bondings C-H···O, that apparently control the crystal packing.     

Structure-dependent spectroscopic and redox properties of copper(I) complexes with bidentate iminopyridine ligands

A series of iminopyridine ligands; cyclopropylpyridin-2-ylmethyleneamine (A), cyclopentylpyridin-2-ylmethyleneamine (B), cyclohexylpyridin-2-ylmethyleneamine (C), and cycloheptylpyridin-2-ylmethyleneamine, (D) and their copper(I) complexes, [Cu(L)₂]⁺ (1a-1d) and [Cu(L)(PPh₃)₂]⁺ (2a-2d) have been synthesized and characterized by CHN analyses, ¹H NMR and IR and UV-Vis spectroscopy. Structures of 1a, 1b, 1c and 2a were determined by X-ray crystallography. The coordination polyhedron about the Cu^I center in the complexes is best described as a distorted tetrahedron. The dihedral angles between the least-squares planes of the chelate ligands show considerable variation from 86.1° in 1a to 68.3° in 1b, indicating the importance of packing forces in the crystalline environment. The UV-Vis spectra of the complexes are characterized by first metal to ligand charge transfer bands increasing in wavelength with increasing size of the ring substituents in the ligands, except for the cyclopropyl compounds (1a and 2a), in good agreement with the variation of the dihedral angles between the ligand planes. Cyclic voltammetry of the complexes indicates a quasireversible redox behavior for the complexes. The bulkier ligands (PPh₃) inhibit the geometric distortion within the oxidized form and the redox potentials of complexes 2a-2d are shifted to more positive values, therefore.     

Synthesis and characterization of the 1:1 adducts of copper(I) halides with bidentate N,N′-bis(benzophenone)-1,2-diiminoethane Schiff base: Crystal structures of [Cu(bz2en)2][CuX2] (X = Br, I) complexes

1:1 adducts of N,N′-bis(benzophenone)-1,2-diiminoethane (bz₂en) with copper(I) chloride, bromide and iodide, [Cu(bz₂en)₂][CuX₂] (X = Cl, Br, and I), have been synthesized and the structures of the solid bromide and iodide adducts were determined by X-ray crystallography from single-crystal data. The solid-state structure reveals ionic complexes containing a cation of copper(I) ion coordinated to four nitrogen atoms of two bz₂en molecules (distorted tetrahedron) and a linear dibromocuprate(I) and a di-μ-iodo-diiododicuprate(I) anion for the bromo and iodo adducts, respectively. The bromo adduct structure contains CH?Br intermolecular hydrogen bonds. The complexes are very stable towards atmospheric oxygen in the solid state. The spectral properties of the above complexes are also discussed.     

Synthesis and crystal structure of a novel binuclear copper(I) complex with bridging monohydrogensulfido (SH) ligands

A novel dinuclear copper(I) complex, [Cu₂(μ₂-SH)₂(PPh₃)₃] (1) (PPh₃ = triphenylphosphine) has been prepared by the reaction of CuCl with triphenylphosphine and mercaptopropanoic acid (MPA) mixed in the ratio of 1:1:1. In the molecular structure of 1, two copper atoms are bridged by S atoms of two monohydrogensulfido anions forming a four-membered ring. The planar Cu₂S₂ core is characterized by significant cuprophilic interactions (Cu-Cu distance = 2.897 ?). One copper atom in 1 is coordinated with two sulfur atoms and one phosphorus atom of PPh₃ adopting a trigonal planar geometry, while the coordination environment around the other copper center is distorted tetrahedral that is completed by two sulfur atoms of SH groups and two phosphorus atoms of PPh₃ molecules.     

X-ray structure and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate

This report describes synthesis, X-ray crystallographic characterization, and photoluminescence of copper(I) 2,6-bis(trifluoromethyl)benzoate, [Cu(O₂C(2,6-CF₃)₂C₆H₃)] (1). Complex 1 has a polymeric structure comprised of axially bound dinuclear [Cu₂(O₂C(2,6-CF₃)₂C₆H₃)₂] units that is reminiscent of the well-known structure of copper(I) acetate, [Cu₂(O₂CMe)₂] (2). However, a close comparison of two analogues revealed a non-planarity of 1D chains and their orthogonal disposition in the crystal structure of 1 versus parallel alignment of planar chains in 2. Complex 1 exhibits green photoluminescence at ca. 560 nm upon UV-radiation (λ_ex = 350 nm) in the solid state.     

Gas phase assembly and X-ray crystal structure of copper(I) 3,5-bis(trifluoromethyl)benzoate network with corannulene

Gas-phase co-deposition of [Cu(O₂C(3,5-CF₃)₂C₆H₃)] (1) with C₂₀H₁₀ at 170 °C affords crystals of the first copper(I)-corannulene adduct [Cu₆(O₂C(3,5-CF₃)₂C₆H₃)₆](C₂₀H₁₀)₂ (2). The X-ray crystallographic characterization of 2 reveals its main structural building blocks: a planar hexanuclear metal core supported by bridging 3,5-bis(trifluoromethyl)benzoate groups and two corannulene molecules. The Cu?Cu distances within the core of 2.6826(8)-2.7607(8) Å fall within the range of cuprophilic interactions. Several intermolecular Cu?C contacts between the cyclic Cu₆-unit and corannulene ranging from 2.799(5) to 3.266(5) Å can be identified. The shortest ones lying within the sum of the van der Waals radii for Cu and C (Σr_vdW (Cu, C) = 3.10 Å) are to the rim sites of corannulene. A noticeable flattening of the C₂₀H₁₀-bowl in 2 is also observed.     

Synthesis and structural characterization of two new polynuclear metal thiosaccharinates: Hexakis(thiosaccharinato)hexasilver(I) and tetrakis(thiosaccharinato)tetracopper(I)

The title compounds, for short Ag₆(tsac)₆ (1) and [Cu₄(tsac)₄(MeCN)₂] · 2MeCN (2), were prepared by the reaction of thiosaccharin with Ag(I) or Cu(II) salts in different solvents. The new complexes were characterized by FT-IR, Raman, UV-Vis and NMR spectroscopy. Their crystal and molecular structures were determined by X-ray diffraction methods. The structures were solved from 1621 (1) and 7080 (2) reflections with I > 2σ(I) and refined to agreement R1-factors of 0.0261 (1) and 0.0456 (2). Ag₆(tsac)₆ molecule derives from the clustering of six Ag(tsac) moieties related to each other through the crystallographic 3-bar (S₆) symmetry operations of the space group. This results in a highly regular molecular structure where the silver atoms are at the corners of an octahedral core slightly compressed along one of its three-fold axis [inter-metallic Ag?Ag contacts of 3.1723(4) and 3.1556(4) Å]. The six thiosaccharinate ligands bridge neighboring Ag atoms along the C₃-axis through Ag-N bonds [d(Ag-N) = 2.285(2) Å] at one end and bifurcated Ag-S(thione)-Ag bonds [Ag-S distances of 2.4861(7) and 2.5014(8) Å] at the other end. In contrast, the 2 compound is arranged in the lattice as an irregular tetrameric copper complex [Cu₄(tsac)₄(MeCN)₂] where the metals show different environments. Two copper ions are four-fold coordinated to three tsac ions through the N-atom of one tsac [Cu-N distances of 2.112(3) and 2.064(3) Å] and the thione sulfur atom of the other two [Cu-S distances in the range from 2.284(1) to 2.358(1) Å] and to a MeCN solvent molecule [Cu-N distances of 1.983(4) and 2.052(3) Å]. The other two copper ions are in three-fold environment, one trans-coordinated to two tsac ions [Cu-N distances of 1.912(3) and 1.920(3) Å] and to the thione S-atom of a third ligand [d(Cu-S) = 2.531(1) Å], the other one to the thione sulfur atom of three tsac ligands [Cu-S distances in the range from 2.229(1) to 2.334(1) Å]. The clustering renders the metals to short distances from each other, the shorter Cu?Cu distance being 2.6033(7) Å, as to presume the existence of weak inter-metallic interaction within the cluster.     

Chelating and bridging bis(diphenylphosphino)aniline complexes of copper(I)

The ligand bis(diphenylphosphino)aniline (dppan) has been shown to be a versatile ligand sporting different coordination modes and geometries as dictated by copper(I) and the counter ion. The molecular structures of its Cu(I) complexes were characterized by X-ray crystallography. The ligand was found in a chelating mode and monomeric complexes were formed when the ligand to copper ratio was 2:1 and the anion was non-coordinating. However, with thiocyanate as the counter anion, the ligand was found to adopt two different modes, with one ligand chelating and the other acting as a monodentate ligand. With CuX (X = Cl, Br), dppan formed a tetrameric complex when the ligand and metal were reacted in the ratio of 1:1. But reactions containing ligand and metal in the ratios of 1:2 or 2:1, resulted in the formation of a mixture of species in solution. Crystallization however, led to the isolation of the tetrameric complex. Variable temperature ³¹P{¹H} NMR spectra of the isolated tetramers did not show the presence of chelated structures in solution. Tetra-alkylammonium salts were added to solutions of various complexes of dppan and studied by ³¹P{¹H} NMR to probe the effect of anions on the stability of complexes in solution. The Cu-dppan complexes were robust and did not interconvert with other structures in solution unlike the bis(diphenylphosphino)isopropylamine complexes.     

Mononuclear copper(I) complexes of O-t-butyl-1,1-dithiooxalate and of O-t-butyl-1-perthio-1-thiooxalate

Described are the syntheses and structures of a phosphonium salt of the anionic ligand O-t-butyl-1,1-dithiooxalate, [PPh₃Bz][i-dto^tBu] ([PPh₃Bz][1]), and of two Cu(I) complexes of this anion, Cu(PPh₃)₂(η²-i-dto^tBu) (2) and Cu(dmp)(PPh₃)(η¹-i-dto^tBu) (3, dmp = 2,9-dimethyl-1,10-phenanthroline). In addition, it was found that the reaction of CuBr₂ with i-dto^tBu⁻ gives a O-t-butyl-1-perthio-1-thiooxalato complex of copper(I), [BzPh₃P][Cu(Br)(S-i-dto^tBu)] ([BzPh₃P][4]), where [S-i-dto^tBu]⁻ is a disulfide-containing anionic ligand. The electronic structure and absorption spectrum of this species were investigated by time dependent DFT methods.     

Alkali cation influence on copper cyanide solid-state architecture: two self-assembled copper(I)-sodium and copper(I)-potassium complexes showing 2D and 3D structures

Two new alternating cyano-bipyrimidine-bridged copper(I) polymers of formula [Cu₂(bpm)₂(CN)₃Na] and [Cu(bpm)(CN)₂K] (bpm=bipyrimidine) have been synthesized and their structures solved by X-ray diffraction. The structure of [Cu₂(bpm)₂(CN)₃Na] consists of trinuclear Cu-bpm-Na-bpm-Cu units interconnected through cyanide groups to afford a 2D network, whereas that of [Cu(bpm)(CN)₂K] is a 3D structure formed by interconnected cyanide-bridged copper(I)-potassium 2D honeycomb-like layers. In both structures the alkali cations play a templating role which is responsible of the final 2D and 3D network constructions.     

Zinc coordination polymers with 1-(3-aminopropyl)-imidazole as bridging bidentate unit

The reaction of Zn(SCN)₂ with one or two equivalents of 1-(3-aminopropyl)-imidazole (api) yields the coordination polymers [Zn(SCN)₂(api)]_n (1) and [Zn(SCN)₂(api)₂]_n (2), respectively. Single-crystal X-ray diffraction analysis reveals one-dimensional polymeric chain structures for both compounds. The structure of 1 consists of tetrahedral Zn(SCN)₂(api)₂ units linked by one molecule 1-aminopropyl imidazole in an unsymmetric mode, i.e., each metal center is coordinated by an imidazole nitrogen as well as a nitrogen of the aminopropyl group. The metal ions in 2 display an octahedral coordination geometry with each Zn(SCN)₂(api)₂ unit linked by two molecules of the imidazole, thus, exhibiting two imidazole and two amino groups in the coordination sphere. The polymers were further characterized by IR-, ¹H NMR- and ¹³C NMR-spectroscopy.     

Homoleptic copper(II) and copper(I) complexes of 5,6-dihydro-5,6-epoxy-1,10-phenanthroline. Six-coordinate copper(I) in solution

Reaction of 5,6-dihydro-5,6-epoxy-1,10-phenanthroline (L) with Cu(ClO₄)₂·6H₂O in methanol in 3:1 M ratio at room temperature yields light green [CuL₃](ClO₄)₂·H₂O (1). The X-ray crystal structure of the hemi acetonitrile solvate [CuL₃](ClO₄)₂·0.5CH₃CN has been determined which shows Jahn-Teller distortion in the CuN₆ core present in the cation [CuL₃]²⁺. Complex 1 gives an axial EPR spectrum in acetonitrile-toluene glass with g_|| = 2.262 (A_|| = 169 × 10⁻⁴ cm⁻¹) and g_⊥ = 2.069. The Cu(II/I) potential in 1 in CH₂Cl₂ at a glassy carbon electrode is 0.32 V versus NHE. This potential does not change with the addition of extra L in the medium implicating generation of a six-coordinate copper(I) species [CuL₃]⁺ in solution. B3LYP/LanL2DZ calculations show that the six Cu-N bond distances in [CuL₃]⁺ are 2.33, 2.25, 2.32, 2.25, 2.28 and 2.25 Å while the ideal Cu(I)-N bond length in a symmetric Cu(I)N₆ moiety is estimated as 2.25 Å. Reaction of L with Cu(CH₃CN)₄ClO₄ in dehydrated methanol at room temperature even in 4:1 M proportion yields [CuL₂]ClO₄ (2). Its ¹H NMR spectrum indicates that the metal in [CuL₂]⁺ is tetrahedral. The Cu(II/I) potential in 2 is found to be 0.68 V versus NHE in CH₂Cl₂ at a glassy carbon electrode. In presence of excess L, 2 yields the cyclic voltammogram of 1. From ¹H NMR titration, the free energy of binding of L to [CuL₂]⁺ to produce [CuL₃]⁺ in CD₂Cl₂ at 298 K is estimated as −11.7 (±0.2) kJ mol⁻¹.     

Spectroscopic and electrochemical properties of heteroleptic cationic copper complexes bis-(diphenylphosphino)alkane-(2,2′-biquinoline)copper(I). Crystal structure of bis(diphenylphosphino)ethane-(2,2′-biquinoline)copper(I) perchlorate

A series of [Cu^(I)(2,2′-biquinoline)(L)](ClO₄) complexes (L = bis(diphenylphosphino)methane (bppm), 1,2-bis(diphenylphosphino)ethane (bppe), 1,4-bis(diphenylphosphino)butane (bppb)) have been synthesized and characterized by elemental analysis, conductivity, ESI-mass, NMR and UV-Vis spectroscopies, cyclic voltammetry, X-ray diffraction ([Cu^(I)(2,2′-biquinoline)(bppe)](ClO₄)) and DFT calculations. These compounds are monometallic species in a distorted tetrahedral arrangement, in contrast with related compounds found as dinuclear according to diffraction studies. The spectroscopic properties are not directly correlated with the length of alkyl chain bridge between the bis-diphenylphosphine groups. In this way, the chemical shift of some 2,2′-biquinoline protons and the metal to ligand charge transfer (Cu to 2,2′-biquinoline) follows the order [Cu(2,2′-biquinoline)(bppm)](ClO₄), [Cu(2,2′-biquinoline)(bppb)](ClO₄), [Cu(2,2′-biquinoline)(bppe)](ClO₄). The same dependence is followed by the potentials to Cu(II)/Cu(I) couple. These results are discussed in terms of inter-phosphorus alkane chain length and tetrahedral distortions on copper.     

Copper(I) complexes with Schiff base and 1,2-bis(diphenylphosphino)ethane as ligands: Synthesis, structure and catalytic properties for the amination of aryl halide

Some copper(I) complexes of the type [Cu(L)(dppe)]X (1-4) [where L = (3-trifluoromethylphenyl)pyridine-2-ylmethylene-amine; dppe = 1,2-bis(diphenylphosphino)ethane; X = Cl⁻, CN⁻, ClO₄⁻ and BF₄⁻] have been synthesized by the condensation of 3-aminobenzotrifluoride with 2-pyridinecarboxaldehyde followed by the reaction with CuCl, CuCN, [Cu(MeCN)₄]ClO₄ and [Cu(MeCN)₄]BF₄ in presence of dppe. The complexes 1-4 were then characterized on the basis of elemental analysis, IR, UV-Vis and ¹H NMR spectral studies. The representative complex of the series 4 has been characterized by single crystal X-ray diffraction which reveal that in complex the central copper(I) ion assumes the irregular pseudo-tetrahedral geometry. The catalytic activity of the complexes was tested and it was found that all the complexes worked as effective catalyst in the amination of aryl halide.     

Synthesis, characterization, crystal structures and photophysical properties of copper(I) complexes containing 1,1′-bis(diphenylphosphino)ferrocene (B-dppf) in doubly-bridged mode

Five copper(I) complexes having general formula [Cu₂(μ-X)₂(κ²-P,P-B-dppf)₂] (X = Cl(1), Br(2), I(3), CN(4), and SCN(5)) were prepared starting with CuX and B-dppf in 1:1 molar ratio in DCM-MeOH (50:50 V/V) at room temperature. The complexes have been characterized by elemental analyses, IR, ¹H NMR, ³¹P NMR and electronic spectral studies. Molecular structures for 1, 2 and 4 were determined crystallographically. Complexes 1, 2 and 4 exist as centrosymmetric dimers in which the two copper atoms are bonded to two bridging B-dppf ligands and two bridging (pseudo-)halide groups in a μ-η¹ bonding mode to generate nearly planar Cu₂(μ-η¹-X)₂ framework. Both bridging B-dppf ligands are arranged in antiperiplanar staggered conformation in 1 and 2 (mean value 56.40-56.76°), and twisted from the eclipsed conformation (mean value 78.19°) in 4. The Φ angle value in 4 is relatively larger as compared to 1 and 2. This seems to indicate that the molecular core [Cu₂(μ-η¹-X)₂] in 4 is a sterically demanding system that forces the B-dppf ligand to adopt a relatively strained conformation in comparison to less strained system in 1 and 2. All the complexes exhibit moderately strong luminescence properties in the solution state at ambient temperature.     

Unusual complexation of Cu(I) by pyrimidine/pyridine-pyrazole derived ligands exploiting the molecular function of 2-mercapto-4,6-dimethylpyrimidine - Syntheses, crystal structures and electrochemistry

Reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. of methyl-5-methyl-1-(4,6-dimethyl-2-pyrimidyl)pyrazole-3-carboxylate (DpymPzC) in presence of 1 equiv. of 2-mercapto-4,6-dimethylpyrimidine (DpymtH) at pH ∼ 6 afforded the tricoordinated copper(I) complex [Cu(DpymPzC)Cl] (1). The same reaction with copper(II) perchlorate hexahydrate, as the metal salt under the same equivalent ratio at pH ∼ 6 formed the tetracoordinated copper(I) complex [Cu(DpymPzC)₂]ClO₄ (2). In both the cases, the role of DpymtH is nothing but only to reduce the copper(II) salt in situ finally forming the copper(I) complex. On the other hand, the direct reaction between the copper(I) thiocyanate and DpymPzC in 2:2 equiv. ratio produced a tricoordinated copper(I) complex [Cu(DpymPzC)SCN] (3). In a similar reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. amount of ethyl-5-methyl-1-(2-pyridyl)pyrazole-3-carboxylate (PyPzC) in presence of 1 equiv. of DpymtH at pH ∼ 6, an intense red coloured microcrystalline compound (4) was obtained. In contrast, 1 equiv. of PyPzC and 2 equiv. of DpymtH on reaction with 1 equiv. of copper(II) chloride dihydrate at pH ∼ 6 produced a novel tetranuclear mixed coordinated [Cu₄(DpymtH)₄Cl₄] complex (5). Here DpymtH plays dual role - a reducing agent for the copper(II) salt followed by a chelating ligand towards copper(I) so formed in situ. Among the above species, 1, 2 and 5 are crystallographically characterized. In 1, the central copper atom is in distorted triangular planar geometry with N₂Cl chromophore whereas in 2, the same is in distorted tetrahedral geometry with N₄ chromophore. Notably, the extent of distortion from the ideal geometry is more in 2. In 5, which is in chair conformation, out of four copper atoms, two being in S₂Cl chromophore are tricoordinated and the remaining two are tetracoordinated with NS₂Cl chromophore. The metal centers are bridged through DpymtH in its ‘thione’ form. Interestingly, the chelation (in part) results in formation of the highly stable four-membered two chelate rings around the two tetracoordinated copper atoms in 5. The two copper centers along the long arm of the chair are separated through a distance of 5.190 Å while those in the short arm are at a length of 3.629 Å. The electronic, IR spectra and electrochemistry of the complexes 1, 2 and 5 have also been investigated.     

Multiple coordination modes of hemilabile 3-dimethylaminopropyl chalcogenolates in platinum(II) complexes: Synthesis, spectroscopy and structures

The reactions of N,N-dimethylaminopropyl chalcogenolates with platinum(II) compounds have been carried out and complexes of the types [PtCl(ECH₂CH₂CH₂NMe₂)]₂ (1) (E = S (1a) and Se (1b)), [Pt(ECH₂CH₂CH₂NMe₂)₂]_n (2) (E = S (2a) and Se (2b)), [(PtCl₂)₂{(Me₂NCH₂CH₂CH₂E)₂}]_n (3), [PtX(SeCH₂CH₂CH₂NMe₂)]₂ (4) (X = SePh (4a) and OAc (4b)) and [PtCl(ECH₂CH₂CH₂NMe₂)(PR₃)]_n (5) (E = S, Se, Te) have been isolated. These complexes have been characterized by elemental analysis, IR, UV-Vis, NMR (¹H, ¹³C, ³¹P, ⁷⁷Se, ¹⁹⁵Pt) spectroscopy and FAB mass spectral data. The structures of [PtCl(SeCH₂CH₂CH₂NMe₂)]₂ (1b) and [PtCl(SCH₂CH₂CH₂NMe₂)(PPr₃)]₂ (5a) have been established by single crystal X-ray diffraction data. Both the molecules have dimeric structures. In 1b, two platinum atoms are held together by symmetrically bridging Se atoms of the chelating selenolate groups. In 5a, two thiolates form a four-membered Pt₂S₂ bridge with dangling NMe₂ groups.     

1D/2D coordination polymers of copper(II) having two superexchange pathways: syntheses, crystal structures and magnetic properties

Two new polynuclear complexes of Cu(II), [(μ-1,1,3-N₃)₂{Cu₂(me₂tn)₂(N₃)₂}]_n (1) (me₂tn=2,2-dimethylpropane-1,3-diamine) and [Cu₂(μ-C₂O₄)(μ-N₃)(ipr₂en)₂]_n(ClO₄)_n (2) (ipr₂en=N,N^′-di-isopropylethane-1,2-diamine) have been synthesized and structurally characterized by X-ray crystallography. The crystal structure of 1 displays a 2D network in which distorted octahedral copper(II) centers, chelated by a me₂tn ligand and bound to a terminal azide, are connected through μ-1,1,3 bridging azide anions. The structure of 2 shows 1D chains comprising alternating [(ipr₂en)Cu-Ox-Cu(ipr₂en)] units and end-to-end azide ligand. The chains on mutual H-bonding interaction through ClO₄⁻, give rise to a 2D supramolecular architecture. The magnetic data of complexes were recorded in the temperature range, 300-2 K. In case of complex 1, the magnetic data are consistent with a ferromagnetic interaction through the end-on azide bridge (J_FM=10 cm⁻¹) and a weak antiferromagnetic interaction (zj=−0.8 cm⁻¹) between the ferromagnetically coupled dimers and an average g-value of 2.05. The susceptibility data of 2 were fitted using an alternating AF-AF chain spin 1/2 law which leads to the following parameters J_oxalate=−180 cm⁻¹, J_azide=−43 cm⁻¹ and g=2.25 cm⁻¹.     

Assembly of 1D, 2D and 3D silver(I) coordination polymers with nitrilotriacetate and 2-aminopyrimidyl mixed ligands

Three mixed ligands coordination polymers (CPs) [Ag_1.5(apym)(nta)_0.5]_n (1), [(NH₄)Ag₂(mapym)(nta)·(H₂O)₃]_n (2), [Ag₂(dmapym)₃(Hnta)]_n (3) (apym = 2-aminopyrimidine, mapym = 4-methyl-2-aminopyrimidine, dmapym = 4, 6-dimethyl-2-aminopyrimidine, H₃nta = nitrilotriacetate) were synthesized and characterized. For 1-3, as the substituents change from H to one methyl and two methyl groups, the dimensionalities of 1-3 decrease from three-dimension (3D) to one-dimension (1D) due to the steric effect of methyl groups. For 1, the μ₂-apym ligands link the Ag(I) ions to form a 1D double-chain incorporating ligand unsupported Ag···Ag interaction. The nta³⁻ ligands extend the 1D double-chain into a 3D framework. In 2, one heptadentate nta³⁻ ligand binds four Ag(I) ions and incorporates μ₂-mapym ligand to link metal centers to form a 2D sheet which can be simplified to be a 10³ net. Complex 3 features a 1D chain structure incorporating Hnta²⁻ and monodentate dmapym ligands. The substituents on the pyrimidyl ring intensively influence the coordination environments of metal ion and the coordination modes of the carboxyl group, and thus determine the structures of the CPs. The photoluminescent properties of 1-3 were also investigated.     

Diverse dimensionalities and structures in copper coordination polymers incorporating substituted aliphatic dicarboxylate ligands and 4,4′-bipyridine

Hydrothermal synthesis has afforded a series of divalent copper coordination polymers with substituted glutarate ligands and the rigid rod tether 4,4′-bipyridine (bpy): {[Cu(Hdmg)₂(bpy)]·H₂O}_n (1, dmg = 3,3-dimethylglutarate), {[Cu₂(dmg)(bpy)₂](ClO₄)]_n (2), [Cu₂(emg)₂(bpy)]_n (3, emg = 3-ethyl, 3-methylglutarate) and [Cu₂(cda)₂(bpy)]_n (4, cda = 1,1-cyclopentanediacetate). All materials were characterized by single-crystal X-ray diffraction. Compound 1 manifests μ₂-oxygen bridged [Cu₂(Hdmg)₄] “X”-patterns connected into a ribbon motif by bpy linkers. On the other hand, 2 possesses mixed-valence [Cu^ICu^IICu^IICu^I] tetrameric clusters bridged by dmg ligands and pillared into an 8-connected body-centered cubic (bcu) cationic lattice by bpy linkers. Compounds 3 and 4 are structurally very similar, displaying chain motifs with {Cu₂(CO₂)₄} paddlewheels connected by dicarboxylates, in turn conjoined into (4,4)-grid coordination polymer layers by bpy tethers. Variable temperature magnetic data indicate the presence of very strong antiferromagnetic coupling within the {Cu₂(CO₂)₄} paddlewheels in the latter two complexes, with g = 2.30(2) and J = −352(3) cm⁻¹ for 3 and g = 2.35(2) and J = −352(5) cm⁻¹ for 4. Significant structural contrasts are evident when compared to previously reported divalent copper/4,4′-bipyridine coordination polymers with unsubstituted or 2-methyl substituted glutarate ligands.