Iron(III), chromium(III) and cobalt(II) complexes with squarate: Synthesis, crystal structure and magnetic properties

The preparation and variable temperature-magnetic investigation of three squarate-containing complexes of formula [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (1) [Cr₂(OH)₂(C₄O₄)₂(H₂O)₄]·2H₂O (2) and [Co(C₄O₄)(H₂O)₄]_n (3) [H₂C₄O₄ = 3.4-dihydroxycyclobutene-1,2-dione (squaric acid)] together with the crystal structures of 1 and 3 are reported. Complex 1 contains discrete centrosymmetric [Fe₂(OH)₂(C₄O₄)₂(H₂O)₄] diiron(II) units where the iron pairs are joined by a di-μ-hydroxo bridge and two squarate ligands acting as bridging groups through adjacent oxygen atoms. Two coordinated water molecules in cis position complete the octahedral environment at each iron atom in 1. The iron-iron distance with the dinuclear unit is 3.0722(6) Å and the angle at the hydroxo bridge is 99.99(7)°, values which compare well with the corresponding ones in the isostructural compound 2 (2.998 Å and 99.47°) whose structure was reported previously. The crystal structure of 3 contains neutral chains of squarato-O¹,O³-bridged cobalt(II) ions where four coordinated water molecules complete the six-coordination at each cobalt atom. The cobalt-cobalt separation across the squarate bridge is 8.0595(4) Å. A relatively important intramolecular antiferromagnetic coupling occurs in 1 whereas it is very weak in 2, the exchange pathway being the same [J = −14.4 (1) and −0.07 cm⁻¹ (2), the spin Hamiltonian being defined as ]. A weak intrachain antiferromagnetic interaction between the high-spin cobalt(II) ions occurs in 3 (J = −0.30 cm⁻¹). The magnitude and nature of these magnetic interactions are discussed in the light of their respective structures and they are compared with those reported for related systems.     

Synthesis and characterization of the chromium(III) complexes of ethylene cross-bridged cyclam and cyclen ligands

Dichloro(4,10-dimethyl-1,4,7,10-tetraazabicyclo[5.5.2]tetradecane)chromium(III) chloride, Dichloro(4,10-dibenzyl-1,4,7,10-tetraazabicyclo[5.5.2]tetradecane) chromium(III) chloride, and Dichloro(4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2] hexadecane)chromium)(III) chloride have been prepared by the reaction of anhydrous chromium(III) chloride with the appropriate cross-bridged tetraazamacrocycle. Aquation of these complexes proved difficult, but Chlorohydroxo(4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane)chromium)(III) chloride was synthesized directly from chromium(II) chloride complexation followed by exposure or the reaction to air in the presence of water. The four complexes were characterized by X-ray crystal structure determination. All contain the chromium(III) ion in a distorted octahedral geometry and the macrocycle in the cis-V configuration, as dictated by the ethylene cross-bridge. Further characterization of the hydroxo complex reveals a magnetic moment of μ_eff = 3.95 B.M. and electronic absorbtions in acetonitrile at λ_max = 583 nm (ε = 65.8 L/cm mol), 431 nm (ε = 34.8 L/cm mol) and 369 nm (ε = 17 L/cm mol).     

Syntheses and characterization of novel binuclear chromium (III) complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam)

The syntheses and characterization of novel binuclear chromium (III) complexes of 1,4,8,11-tetraazacyclotetradecane (cyclam) are described. The complex [(cyclam)Cr(OH)]₂Cl₄ · 7H₂O (1) crystallizes in the monoclinic space group C2/c with four binuclear formula units in a cell of dimensions a = 17.403 (2), b = 16.803 (3), c = 12.708 (2) Å, and β = 100.83 (1)°. The cation in 1 consists of di-μ-hydroxodichromium (III) units. The bridging OH groups lie on a twofold axis, which relates one end of the dimer to the other and gives rise to a rigorously planar Cr₂O₂ bridging unit. The Cr?Cr separation is 3.122 (1) Å and the average bridging Cr-O-Cr angle is 104.6 (4)°. The complex [(cyclam)Cr(SO₄)]₂ (ClO₄) · H₂O (5) crystallizes in the monoclinic space group P2₁/c with two binuclear formula units in a cell of dimensions a = 9.516 (2), b = 13.263 (3), c = 14.870 (3) Å, and β = 104.08 (3)°. This cation consists of bis-μ-sulfato-di-chromium (III) units, in which the two chromium centers are bridged by two bridging sulfate groups leading to an eight-membered {Cr-O-S-O}₂ bridging framework. Both dimers exhibit antiferromagnetic interactions, with J = 27.7 cm⁻¹ for complex 1 and J = 4.7 cm⁻¹ for complex 5. The EPR spectrum of the complex 1 has been simulated, demonstrating that the spectrum almost entirely originates from the quintet state, while a few lines can be attributed as triplet and septet transitions.     

Highly trans-1,4 selective polymerization of 1,3-butadiene initiated by iron(III) bis(imino)pyridyl complexes

A series of 2,6-bis(imino)pyridyl iron(III) complexes of the general formula [2,6-(ArNCMe)₂C₅H₃N]FeCl₃ (Ar = -C₆H₅, 3a; 2-MeC₆H₄, 3b; 2-EtC₆H₄, 3c; 2-ⁱPrC₆H₄, 3d; cyclohexyl, 3e; 4-MeC₆H₄, 3f; 4-ⁱPrC₆H₄, 3g; 4-FC₆H₄, 3h and 4-CF₃C₆H₄, 3i), activated by alkylaluminum, MAO or MMAO, have been investigated in 1,3-butadiene polymerization. Iron(III) complex (3a), with the least steric hindrance around the metal center, gives polymer up to 99% in yield in 4 h (butadiene to iron ratio = 1000), and trans-1,4 selectivity about 94.7% at room temperature in toluene, while those (3b-3d) bearing alkyl substituents at the 2-position of each N-aryl ring exhibit much lower catalytic activity and tunable trans-1,4 selectivity. Introduction of an alkyl group at the 4-position (para-position, 3f and 3g) exerts a slightly beneficial effect on the trans-1,4 selectivity, while electronegative groups at the same position (3h and 3i) affect negatively on the activity. The effects of temperature, types of cocatalyst and Al/Fe molar ratio on the polymerization behavior are investigated. More importantly, a mechanism for forming trans-1,4 structure is also proposed.     

Crystal structures and third-order NLO properties in DMF solution of Co(II)-bpfp coordination polymers (bpfp=N,N-bis(pyridylformyl)piperazine)

Two novel Co(II) coordination polymers {[Co(H₂O)₂(CH₃OH)₂(4-bpfp)](NO₃)₂}_n1 (4-bpfp=N,N^′-bis(4-pyridylformyl)piperazine) and [Co(NCS)₂(CH₃OH)₂(3-bpfp)]_n2 (3-bpfp=N,N^′-bis(3-pyridylformyl)piperazine) have been synthesized and characterized by single crystal X-ray diffraction. Both the polymers consist of one-dimensional chains constructed by bridging bpfp ligands and Co(II) ions. The existence of O?H-O hydrogen bond in 1 and S?H-O hydrogen bond in 2 play important roles in creating interesting supramolecular structures. Their third-order nonlinear optical (NLO) properties in DMF solution have been studied by Z-scan technique. The results reveal that polymers 1 and 2 exhibit strong NLO absorption effects (α₂=9.00×10⁻¹¹ m W⁻¹ for 1; 1.41 × 10⁻¹⁰ m W⁻¹ for 2) and self-focusing performance (n₂=3.24×10⁻¹⁶ esu for 1; 3.05 × 10⁻¹⁶ esu for 2) in DMF solutions. The corresponding effective NLO susceptibilities χ⁽³⁾ values are 3.08 × 10⁻¹² esu (1) and 4.70 × 10⁻¹² esu (2). All of the values are comparable to those of the reported good NLO materials. Additionally, the TG-DTA results of the two polymers are in agreement with the crystal structures.     

Synthesis, structure and catalytic activity of low-spin dicyano iron(III) complexes of N,N-bis(quinolyl)malonamide derivatives

Two low-spin Fe(III) dicyano-dicarboxamido complexes have been prepared from N,N^′-bis(8-quinolyl)malonamide derivatives. Crystal structures show that the four nitrogen donors available to complex the metal are arranged in the equatorial plane with the two cyanides trans to each other in the axial positions when the malonyl moiety is disubstituted. In contrast, the unsubstituted malonyl results in only three nitrogens in the equatorial plane with the fourth in an apical position and the two cyanides occupying cis sites, one equatorial and the other axial. NMR analyses show that the solid state structure of both complexes is retained in solution. Both types of configurational complexes catalyze cyclic olefin oxidations with H₂O₂ but only the cis-dicyano complex catalyzes stilbene oxidation with formation of epoxides, diols and benzaldehyde.     

Quantifying the trans influence of triphenylarsine. Crystal and molecular structures of cis-[PtCl2(SMe2)(AsPh3)] and cis-[PtCl2(AsPh3)2]·CHCl3

Reaction between a mixture of cis-trans-[PtCl₂(SMe₂)₂] and 1 equiv. AsPh₃ in chloroform gives cis-[PtCl₂(SMe₂)(AsPh₃)] crystallizing in P2₁/n with a=10.397(2), b=14.876(3), c=13.956(3) Å, β=90.86(3)° and Z=4. Selected geometrical parameters are PtAs 2.3531(10), PtS 2.262(2), PtCl (trans to S) 2.301(2), PtCl (trans to As) 2.328(2) Å and SPtAs 88.85(6), SPtCl(2) 90.77(8), AsPtCl(1) 91.07(6) and ClPtCl 89.42(7)°. cis-[PtCl₂(AsPh₃)₂]·CHCl₃ crystallizes in P2₁/c with a=20.557(4), b=9.5951(19), c=20.147(4) Å, β=96.77(3)° and Z=4. Selected geometrical parameters are PtAs(1) 2.3599(9), PtAs(2) 2.3770(9), PtCl(1) (trans to As(1)) 2.3515(18), PtCl(2) (trans to As(2)) 2.3251(18) Å and AsPtAs 97.87(3), As(1)PtCl(2) 88.67(5), As(2)PtCl(1) 84.30(5) and ClPtCl 89.32(7)°. By comparison with related structures from the literature the following trans influence series was established PMe₂Ph>PPh₃>AsPh₃≈SbPh₃>Me₂SO≈SMe₂≈SPh₂>NH₃≈olefin>Cl⁻>MeCN.     

Bacterial removal of chromium (VI) and (III) in a continuous system

The capacity of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans to reduce different concentrations of hexavalent chromium in shake flask cultures has been investigated. A. ferrooxidans reduces 100% of chromium (VI) at concentrations of 1, 2.5 and 5 ppm, but in the presence of 10 ppm only 42.9% of chromium (VI) was reduced after 11 days of incubation. A. thiooxidans showed a lower capacity to reduce this ion and total reduction of chromium (VI) was only obtained for concentrations of 1 and 2.5 ppm, whereas 64.7% and 30.5% was reached for 5 and 10 ppm, respectively, after 11 days. A continuous flow mode system was subsequently investigated, in which A. thiooxidans was immobilized on elemental sulphur and the acidic medium obtained was employed to solubilize chromium (III) and to reduce chromium (VI) present in a real electroplating waste [30% of chromium (III) and 0.1% of chromium (VI)]. The system enabled the reduction of 92.7% of hexavalent chromium and represents a promising way to treat this type of waste in the industry.     

Reactions and structures in the gallium(III)/indium(III)-N,N-dimethylthioformamide systems

The structure of the N,N-dimethylthioformamide (DMTF) solvated gallium(III) ion has been determined in solution by means of extended X-ray absorption fine structure (EXAFS) spectroscopy. The gallium(III) ion is four-coordinate in tetrahedral fashion with a mean Ga-S bond distance of 2.233(2) Å in DMTF solution. At the dissolution of indium(III) perchlorate or trifluoromethanesulfonate in DMTF coordinated solvent molecules are partly reduced to sulfide ions, and a tetrameric complex with the composition [In₄S₄(SHN(CH₃)₂)₁₂]⁴⁺ is formed. The structure of the solid tetrameric complex in the perchlorate salt was solved with single crystal X-ray diffraction. Four indium(III) ions and four sulfide ions form a highly symmetric heterocubane structure where each indium binds three bridging sulfide ions and each sulfide ion binds three indium(III) ions with a mean In-S bond distance of 2.584(1) Å, and S-In-S angles of 90.3(1)°. Each indium(III) additionally binds three DMTF molecules at significantly longer mean In-S bond distance, 2.703(1) Å; the S-In-S angles are in the range 80.3-90.4°. Large angle X-ray scattering data on a DMTF solution of indium(III) trifluoromethanesulfonate show that the same tetrameric species characterized in the solid state is also present in solution, whereas the EXAFS measurements only give information about the In-S bond distances due to the short core hole lifetime.     

Synthesis, X-ray crystal structure, DFT- and TDDFT-based spectroscopic property investigations on a mixed-ligand chromium(III) complex, bis[2-(2-hydroxyphenyl)benzimidazolato]-(1,10-phenanthroline)chromium(III) isophthalate

A mixed-ligand Cr(III) complex with 2-(2-hydroxyphenyl)benzimidazole, 1,10-phenanthroline and isophthalic acid, [Cr(pbm)₂(phen)]X_0.5 (1X_0.5) (Hpbm = 2-(2-hydroxyphenyl)benzimidazole; phen = 1,10-phenanthroline; H₂X = isophthalic acid) has been prepared by heating in aqueous solution and characterized, and the geometric structure and spectroscopic properties, investigated experimentally and theoretically by using the density functional theory level (DFT) and the time-dependent density functional theory level (TDDFT). The theoretical-experimental agreement is satisfactory. Further theoretical analyses of electronic structure and molecular orbitals have demonstrated that the low-lying absorption bands in UV-Vis spectrum are mainly π → π∗ ligand-to-ligand charge transfer transition (LLCT) and or π → (d_z²-d_x²-y²-d_yz) ligand-to-metal charge transfer transition (LMCT) in nature.     

A deliberate synthesis of a mononuclear trans-dimethoxide complex of ruthenium(III). X-ray crystal structure, electrochemistry and electron paramagnetic resonance

Using bis(3,5-dimethylpyrazol-1-yl)methane as the bidentate N donor ligand L, the yellow compound trans-[Ru^IIIL₂(OMe)₂]ClO₄ · CH₂Cl₂ is synthesized. It is a rare example of a mononuclear dialkoxo complex of Ru(III). It shows a quasireversible Ru(II/III) couple at −0.65 V versus NHE in acetonitrile at a Pt electrode. Its magnetic moment at room temperature corresponds to one unpaired electron. It displays a rhombic EPR spectrum in acetone at 77 K with g = 2.219, 2.062 and 1.855.     

Synthesis, characterization, spectroscopic and electrochemical properties of trans,trans,trans-bis(triphenyl phosphine) bis(aroyl hydrazonato)ruthenium(II) complexes

Four ruthenium (II) complexes of general formula Ru(PPh₃)₂(L)₂ have been synthesized and characterized. The spectroscopic and cyclic voltammetric studies of these complexes are also reported. X-ray crystal structure determination of two of the complexes reveal that Ru(II) occupies trans,trans,trans-(t,t,t) N₂O₂P₂ centrosymmetric octahedral environments, with the ligand pair occupying the equatorial plane. ³¹P NMR confirms the presence of two trans-PPh₃ groups in all the complexes. The transformation of the complexes in dichloromethane solution is studied by spectrophotometry and ³¹P NMR spectroscopy.     

Collection of chromium (III) by sulfite and sisulfite chitosans

Abstract

Chromium (III) collection on sulfite (CS) and bisulfite (CBS) chitosans was investigated in order to obtain information about chromium recovery from tannery wastes from the chromium leather process. Collection of Cr(III) by sulfite and bisulfite chitosans was fast during the first 60 minutes and was affected by the pH of the solution, contact time and temperature. Chromium collected on bisulfite was easily eluted with dilute sulfuric acid solution.     

Crystal structure and magnetic behaviour of a five-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone

The crystal structure and magnetic properties of a penta-coordinate iron(III) complex of pyridoxal-4-methylthiosemicarbazone, [Fe(H₂mthpy)Cl₂](CH₃C₆H₄SO₃), are reported. The synthesised ligand and the metal complex were characterised by spectroscopic methods (¹H NMR, IR, and mass spectroscopy), elemental analysis, and single crystal X-ray diffraction. The complex crystallises as dark brown microcrystals. The crystal data determined at 100(1) K revealed a triclinic system, space group (Z = 2). The ONSCl₂ geometry around the iron(III) atom is intermediate between trigonal bipyramidal and square pyramidal (τ = 0.40). The temperature dependence of the magnetic susceptibility (5-300 K) is consistent with a high spin Fe(III) ion (S = 5/2) exhibiting zero-field splitting. Interpretation of these data yielded: D = 0.34(1) cm⁻¹ and g = 2.078(3).     

Magnetic and optical properties of trans-RSSR-[CrCl2(cyclam)]2ZnCl4 (cyclam = 1,4,8,11-tetraazacyclotetradecane) attributed to counterion via hydrogen bonding

This is the first reported example of a photochromic property presented by the change of a counterion in a coordination compound: the colour of the trans-[CrCl₂(cyclam)]₂ZnCl₄ (1) is dark green while the trans-[CrCl₂(cyclam)]Cl (2) is a reddish purple. The dark green colour of 1 under a fluorescent lamp changes to a deep purple when it is irradiated with an incandescent lamp; when the latter light is turned off, the dark green colour reappears instantaneously, this being a reversible process. Besides, the electron paramagnetic resonance (EPR) spectra of these polycrystalline samples show a very broad isotropic peak centred at g = 1.995 for 1 and for 2 a rhombic one at g = 4.309, 3.107 and 1.223. Their molar magnetic susceptibilities, χ_Mdc, against temperature (2-300 K) follow Curie Weiss behaviour. For 1, a low antiferromagnetic coupling (θ = −2.78 K) in the solid state was found as it approaches 2 K, while for 2, there was found a smaller antiferromagnetic coupling (θ = −0.40 K). From the luminescence studies at 17 K, the lifetime for 1 was found to be twice that for 2. The crystal and molecular structure of 2 were determined and discussed. Compounds 1 and 2 show the same trans-RSSR configuration with different hydrogen bonding networks. In 1 the supramolecular array includes intermolecular interactions in which the chromium atoms interact through the zinc atom of the tetrachlorozincate counterion via hydrogen bonding with the extraordinary consequence of showing the previously described physical properties. This has been supported by theoretical calculations, in which it is clearly observed that the HOMO orbital of 1 is a highly delocalised molecular orbital among Cr(III)?Zn(II)?Cr(III), thus giving even more evidence for the strong Cr(III)-Cr(III) interaction through the ZnCl₄ moiety via hydrogen bonding.     

Preparation, crystal structures and spectroscopic properties of novel [MCl3 − n(P)3 + n] (M = Co, Rh; n = 0, 1, 2 or 3) series of complexes containing tripodal tridentate phosphine, 1,1,1-tris(dimethylphosphinomethyl)ethane

Cobalt(III) and rhodium(III) complexes of the series of [M^IIICl_3 − n(P)_3 + n]ⁿ⁺ (M = Co or Rh; n = 0, 1, 2 or 3) have been prepared with the use of 1,1,1-tris(dimethylphosphinomethyl)ethane (tdmme) and mono- or didentate phosphines. The single-crystal X-ray analyses of both series of complexes revealed that the M-P and M-Cl bond lengths were dependent primarily on the strong trans influence of the phosphines, and secondarily on the steric congestion around the metal center resulting from the coordination of several phosphine groups. In fact, the M-P(tdmme) bonds became longer in the order of [MCl₃(tdmme)] < [MCl₂(tdmme)(PMe₃)]⁺ < [MCl(tdmme)(dmpe)]²⁺ (dmpe = 1,2-bis(dimethylphosphino)ethane) < [M(tdmme)₂]³⁺ for both Co^III and Rh^III series of complexes, while the M-Cl bond lengths were shortened in this order (except for [M(tdmme)₂]³⁺). Such a steric congestion around the metal center can also account for the structural and spectroscopic characteristics of the series of complexes, [MCl(tdmme)(dmpm, dmpe or dmpp)]²⁺ (dmpm = bis(dimethylphosphino)methane, dmpp = 1,3-bis(dimethylphosphino)propane). The X-ray analysis for [CoCl(tdmme)(dmpm or dmpe)](BF₄)₂ showed that all Co-P bonds in the dmpm complex were shorter by 0.03-0.04 Å than those in the dmpe complex. Furthermore, the first d-d transition energy of the Co^III complexes and the ¹J_Rh-P(tdmme) coupling constants observed for the Rh^III complexes indicated an unusual order in the coordination bond strengths of the didentate diphosphines, i.e., dmpm > dmpe > dmpp.     

Simultaneous Cr(VI) reduction and phenol degradation in pure cultures of Pseudomonas aeruginosa CCTCC AB91095

Simultaneous Cr(VI) reduction and phenol degradation were investigated in a reactor containing Pseudomonas aeruginosa CCTCC AB91095. Phenol was used as carbon source. P.aeruginosa utilized metabolites formed during phenol degradation as energy source for Cr(VI) reduction. Cr(VI) inhibited both Cr(VI) reduction and phenol degradation when Cr(VI) concentration exceeded the optimum value (20 mg/L), whereas phenol enhanced both Cr(VI) reduction and phenol degradation below the optimum initial concentration of 100 mg/L. Cr(III) was the predominant product of Cr(VI) reduction in cultures after incubation for 24 h. Both Cr(VI) reduction and phenol degradation were influenced by the amount of inocula. The concentration of Cr(VI) and phenol declined quickly from 20, 100 to 3.36, 29.51 mg/L in cultures containing of 5% (v/v) inoculum after incubation for 12 h, respectively. The whole study showed that P. aeruginosa is promising for the reduction of toxic Cr(VI) and degradation of organic pollutants simultaneously in the mineral liquid medium.     

Characterization and oxidation of chromium(III) by sodium hypochlorite in alkaline solutions

Chromium exists in nuclear waste sludges and is a problematic element in the vitrification process of high-level nuclear wastes. It is therefore necessary to treat the waste sludges to remove chromium prior to vitrification, by caustic leaching or oxidation of Cr(III) to Cr(VI). The objective of this study is to investigate the effect of oligomerization of Cr(III) on its oxidation by hypochlorite in alkaline solutions.Monomeric, dimeric and trimeric Cr(III) species in solution were separated by ion exchange. The kinetics of the oxidation of the separated species by hypochlorite in alkaline solutions was studied by UV/Vis absorption spectroscopy, and compared with the oxidation by hydrogen peroxide previously studied. Results indicate that hypochlorite can oxidize Cr(III) to Cr(VI) in alkaline solutions, but the rate of oxidation by hypochlorite is slower than that by hydrogen peroxide at the same alkalinity and concentrations of oxidants. The rate of oxidation of Cr(III) by both oxidants decreases as the concentration of sodium hydroxide is increased, but the oxidation by hypochlorite seems less affected by the degree of oligomerization of Cr(III) than that by peroxide. Compared with the oxidation by hydrogen peroxide where the major reaction pathway has an inverse order with respect to C_NaOH, the oxidation by hypochlorite has a significant reaction pathway independent of [OH⁻].     

On the structure of the N,N′-dimethylpropyleneurea and dimethylsulfoxide solvated gallium(III) and indium(III) ions and bromide complexes in solution and solid state, and the complex formation of the gallium(III) and indium(III) bromide systems in N,N′-dimethylpropyleneurea

The structures of the N,N′-dimethylpropyleneurea (DMPU) solvated gallium(III) and indium(III) ions have been determined in DMPU solution by means of EXAFS. The gallium(III) ion is five-coordinate with a mean Ga-O bond distance of 1.924(5) Å, while the larger indium(III) ion is octahedrally coordinated with a mean In-O bond distance of 2.146(3) Å. The complex formation equilibria in DMPU for the gallium(III) and indium(III) bromide systems have been studied calorimetrically at 298 K. Three relatively strong complexes are formed in the indium(III) bromide system in DMPU, whereas no stability constants could be established in the gallium(III) bromide system as the heats of complex formation were very close to zero. Gallium(III) bromide is present as DMPU solvated GaBr₃ complexes in solution with three equatorial Ga-Br bonds at 2.328(3) Å, and two Ga-O bonds at 1.92(3) Å in the apical positions of a distorted trigonal bipyramid. The DMPU solvated indium(III) bromide has the same configuration with a mean In-Br bond distance of 2.510(3) Å, and two In-O bonds at 2.201(6) Å. Indium(III) binds three bromides and three Me₂SO molecules through the oxygen atoms in octahedral fac-configuration with mean In-Br and In-O bond distances of 2.630(3) and 2.211(15) Å, respectively.     

Synthesis and structural characterization of a novel diosmium(III) compound: Os2(ap)4Cl2

The reaction between Os₂(OAc)₄Cl₂ and Hap (Hap is 2-anilinopyridine) under prolonged refluxing conditions resulted in a new Os₂(III) compound, Os₂(ap)₄Cl₂ (1). The molecular structure of 1 was determined from a single crystal X-ray diffraction study, which revealed an Os-Os bond length of 2.396[1] Å, and a cis-(2,2) arrangement of the ap ligands. Also reported are magnetic, electrochemical and spectroscopic properties of 1.