Disulfide cross-linked polymer capsules: en route to biodeconstructible systems

Hydrogen-bonded multilayer thin films were constructed using poly(vinylpyrrolidone) and poly(methacrylic acid) functionalized with cysteamine. The resulting films included thiol moieties that were cross-linked to render the films stable at physiological pH. Film buildup was followed using quartz crystal microgravimetry, which was also used to demonstrate the improved stability imparted by reacting the thiol moieties to form disulfide bonds. Films without disulfide bonds were readily deconstructed at physiological pH, while those with disulfide bonds were swollen upon exposure to this pH (7) but remained intact. Addition of a common thiol-disulfide exchange reagent, dithiothreitol (DTT) at pH 7 led to disassembly of the multilayer films. The films were also prepared on colloidal substrates (as demonstrated using confocal microscopy) and were used to retain a model drug (fluorescently labeled transferrin) and release this molecule when triggered by the addition of DTT. This approach has potential for the in vivo applications of hollow capsules, as thiol-disulfide exchange leading to deconstruction of the capsules can occur with the assistance of intracellular proteins.     

The location of cytochrome c on the surface of ultrathin lipid multilayer films using x-ray diffraction.

X-ray diffraction and spectroscopic techniques were used to characterize ultrathin fatty acid multilayers having a bound surface layer of cytochrome c. Three to six monolayers of arachidic acid were deposited onto an alkylated glass surface, using the Langmuir-Blodgett method. These fatty acid multilayer films were stored either in a 1 mM NaHCO3 pH 7.5 solution or a buffered 10 microM cytochrome c solution, pH 7.5. After washing extensively with buffer, these multilayer films were assayed for bound cytochrome c by optical spectroscopy. It was found that the cytochrome c bound only to the odd-numbered monolayer films (which have hydrophilic surfaces). The theoretical number of cytochrome c molecules bound to the ultrathin multilayer films having three or five monolayers was calculated as N = 1.2 x 10(13)/cm2 (assuming a hexagonally close-packed monolayer of protein), which would produce an optical density of 0.002 at a wavelength of 550 nm; for a three or five monolayer ultrathin film that was incubated with cytochrome c, OD550 approximately equal to 0.002. The protein was released from the film when treated with greater than 100 mM KCl solution, as would be expected for an electrostatic interaction. Meridional x-ray diffraction data were collected from the arachidic acid films with and without a bound cytochrome c layer. A box refinement technique, previously shown to be effective in deriving the profile structures of nonperiodic ultrathin films, was used to determine the multilayer electron density profiles. The electron density profiles and their autocorrelation functions showed that bound cytochrome c resulted in an additional electron dense feature on the multilayer surface, consistent with a bound cytochrome c monolayer. The position of the bound protein relative to the multilayer surface was independent of the number of fatty acid monolayers in the multilayer. Future studies will use these methods to investigate the structures of membrane protein complexes bound directly to the surface of multilayer films.     

Rational design of cytophilic and cytophobic polyelectrolyte multilayer thin films

Nanostructured polyelectrolyte multilayer thin films electrostatically assembled alternately from such polymers as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) were investigated for their in vitro cell interactions. Not surprisingly, NR6WT cells, a highly adhesive murine fibroblast cell line, attached to many different multilayer combinations tested. However, PAH/PAA multilayers constructed at pH deposition conditions of 2.0/2.0 were completely bioinert. Analogous cell interactions were observed with PAH/poly(methacrylic acid) (PAH/PMA), PAH/sulfonated poly(styrene) (PAH/SPS), and poly(diallyldimethylammonium chloride)/SPS (PDAC/SPS) systems, thereby suggesting a general trend in the fibroblasts' response to multilayers. Specifically, highly ionically stitched films attracted cells, whereas weakly ionically cross-linked multilayers, which swell substantially in physiological conditions to present richly hydrated surfaces, resisted fibroblast attachment. Thus, by manipulating the multilayer pH or ionic strength assembly conditions or both, which in turn dictate the molecular architecture of the thin films, one may powerfully direct a single multilayer combination to be either cell adhesive or cell resistant.     

The deposition and stability of pectin/protein and pectin/poly-l-lysine/protein multilayers

The sequential deposition of pectin and protein – bovine serum albumin (BSA), β-lactoglobulin (BLG) and gelatin – to form multilayer structures was examined by Fourier transform infrared-attenuated total reflection spectroscopy (FTIR-ATR) and a quartz crystal microbalance with dissipation monitoring (QCMD). With each layer deposited there was a progressive increase in mass deposited, with a more substantial deposition of protein. Pectin deposition led to a relatively hydrated, open structure which permitted binding of protein within the layer when the biopolymers carried an opposite net charge. On increasing the pH, disassembly of the structures occurred within the vicinity of the isoelectric point of the globular proteins. No disassembly was observed for the pectin/gelatin multilayer. When a globular protein was substituted for a poly-l-lysine layer in a pectin/poly-l-lysine multilayer it was displaced by the subsequent deposition of a poly-l-lysine layer, the more highly charged polycation displacing the relatively low charged polyampholyte. The pectin/poly-l-lysine/protein multilayers remained intact upon titration to pH 8.0.     

Investigation of the active site of papain with fluorescent probes

7-Chloro-4-nitrobenzo-2-oxa-1,3-diazole (NBD chloride) and 7-(2'-hydroxyethylthio)-NBD (obtained from NBD chloride and mercaptoethanol) undergo a reversible spectral change in alkaline solution that depends respectively on a single apparent pK(a) 9.76 (at 25 degrees C) and 8.81 (at 32 degrees C). In acid solution however no spectral change was observed. NBD chloride reacts slowly with papain at pH7, but the rate of inhibition increases at lower pH and depends on an apparent pK(a) of 3.7 (at 35 degrees C), which has been tentatively assigned to the carboxyl group of aspartic acid-158. The spectral properties of NBD-papain indicate that the thiol group of cysteine-25 is the site of reaction. The intensity of the fluorescence-emission spectrum of NBD-papain depends on a single pK(a) of 4.2 (at 26.7 degrees C). The intensity of the fluorescence-emission spectrum of the mixed disulphide formed from papain and 7-(2'-mercaptoethylamino)-NBD (obtained from NBD chloride and cysteamine) depended on a single pK(a) of 3.94 in water and 3.89 in aq. 19.2% (v/v) dioxan (at 27 degrees C). This small change to lower pK(a) value in a medium of lower dielectric constant is characteristic of a cationic acid. The only acid of this type in the active-site region is the conjugate acid of histidine-159.     

Inherent charge-shifting polyelectrolyte multilayer blends: a facile route for tunable protein release from surfaces

Recent research has highlighted degradable multilayer films that enable the programmed release of different therapeutics. Multilayers constructed by the layer-by-layer (LbL) deposition that can undergo disassembly have been demonstrated to be of considerable interest, particularly for biomedical surface coatings due to their versatility and mild aqueous processing conditions, enabling the inclusion of biologic drugs with high activity. In this study, we examine the controlled release of a protein using a different mechanism for film disassembly, the gradual dissociation of film interactions under release conditions. Poly(β-amino ester)s and poly(L-lysine) (PLL) were used as the positively charged multilayer components coassembled with a model negatively charged antigen protein, ovalbumin (Ova). The release of the protein from these multilayer films is dominated by the slow shift in the charge of components under physiological pH conditions rather than by hydrolytic degradative release. The time scale of release can be varied over almost 2 orders of magnitude by varying the ratio of the two polyamines in the deposition solution. The highly versatile and tunable properties of these films form a basis for designing controlled and sequential delivery of drug coatings using a variety of polyions.     

Cholesterol biosensors prepared by layer-by-layer technique

The analysis of formation, deposition and characterization of cholesterol oxidase (COX) layer-by-layer films were performed. Initially, a layer of polyanion, poly(styrene sulfonate) (PSS) was adsorbed followed by a layer of polycation, poly(ethylene imine) (PEI) on each solid substrate from aqueous solutions. The alternating layers were formed by consecutive adsorption of polycations (PEI) and negatively charged proteins (COX) and cholesterol esterase (CE). A strong interaction between protein and polyelectrolyte improves the stability of the alternating multilayer; however, it can change a native protein conformation and impair the protein activity. The PSS/PEI/COX, PSS/PEI/COX/PEI/CE, PSS/PEI/COX-CE/PEI etc. layered structures were prepared on the surface of a platinum electrode, ITO coated glass plate, quartz crystal microbalance, quartz plates, mica and silicon substrates. Optical and gravimetric measurements based on an ultraviolet–visible absorption spectroscopy and a quartz crystal microbalance revealed that the enzyme multilayers thus prepared consist of molecular layered of the proteins. The surface morphology of such bilayer films was investigated by using atomic force microscopy. The electrochemical redox processes of the enzyme-layered films deposited either on platinum or ITO coated glass plate were investigated. The response current of cholesterol oxidase electrode with concentration of cholesterol was investigated at length.     

Layer-by-layer fabrication and direct electrochemistry of glucose oxidase on single wall carbon nanotubes

Layer-by-layer assembly of glucose oxidase (GOx) with single-wall carbon nanotubes (SWCNTs) is achieved on the electrode surface based on the electrostatic attraction between positively charged GOx in pH 3.8 buffer and negatively charged carboxylic groups of CNTs. The cyclic voltammetry and electrochemical impedance spectroscopy are used to characterize the formation of multilayer films. In deaerated buffer solutions, the cyclic voltammetry of the multilayer films of {GOx/CNT}_n shows two pairs of well-behaved redox peaks that are assigned to the redox reactions of CNTs and GOx, respectively, confirming the effective immobilization of GOx on CNTs using the layer-by-layer technique. The redox peak currents of GOx increase linearly with the increased number of layers indicating the uniform growth of GOx in multilayer films. The dependence of the cyclic voltammetric response of GOx in multilayer films on the scan rate and pH is also studied. A linear decrease of the reduction current of oxygen at the {GOx/CNT}-modified electrodes with the addition of glucose suggests that such multilayer films of GOx retain the bioactivity and can be used as reagentless glucose biosensors.     

Enzymatic desorption of layer-by-layer assembled multilayer films and effects on the release of encapsulated indomethacin microcrystals

Polyelectrolyte multilayer films were prepared through layer-by-layer (LbL) self-assembly of chitosan (CHI) and pyrene labeled poly(2-acrylamido-2-methylpropanesulfonic acid) (APy). After incubation in an enzyme pepsin solution, multilayer films were partially destroyed as detected by a decrease in fluorescence intensity due to enzymatic degradation of CHI and desorption of APy. The multilayer desorption rate was the highest at pH 4.0. Increasing temperature from 20 degrees C to 60 degrees C accelerated desorption. The enzymatic desorption was also observed from microcapsule walls made of CHI/alginate (ALG) multilayer films directly deposited on indomethacin (IDM) microcrystals by LbL self-assembly. After pepsin erosion, the IDM release from the microcapsule monitored by UV absorbance was obviously accelerated due to desorption. The influence of incubation time, pH, and temperature of the pepsin solution on the IDM release was investigated. The release rate was the fastest after incubation in the pepsin solution at pH 4.0 due to the highest activity of pepsin. Increasing incubation temperature from 20 degrees C to 60 degrees C, however, slowed down the release rate, which was considered to be due to the formation of more perfect and compact multilayer films through the chain rearrangement at higher temperatures. The CHI/ALG multilayer film was found to maintain its barrier function to the IDM diffusion even after 6-h incubation in the pepsin solution.     

Multilayer biomimetics: reversible covalent stabilization of a nanostructured biofilm

Designed polypeptides and electrostatic layer-by-layer self-assembly form the basis of promising research in bionanotechnology and medicine on development of polyelectrolyte multilayer films (PEMs). We show that PEMs can be formed from oppositely charged 32mers containing several cysteine residues. The polypeptides in PEMs become cross-linked under mild oxidizing conditions. This mimicking of disulfide (S-S) bond stabilization of folded protein structure confers on the PEMs a marked increase in resistance to film disassembly at acidic pH. The reversibility of S-S bond stabilization of PEMs presents further advantages for controlling physical properties of films, coatings, and other applications involving PEMs.     

Manipulating the salt and thermal stability of DNA multilayer films via oligonucleotide length

DNA films are promising materials for diverse applications, including sensing, diagnostics, and drug/gene delivery. However, the ability to tune the stability of DNA films remains a crucial aspect for such applications. Herein, we examine the role of oligonucleotide length on the formation, and salt and thermal stability, of DNA multilayer films using oligonucleotides of homopolymeric diblocks (polyAG and polyTC), with each block (A, G, T, or C) ranging from 5 to 30 bases (10-, 20-, 30-, 40-, and 60-mer). Using a combination of quartz crystal microgravimetry, dual polarization interferometry, and flow cytometry, we demonstrate that at least 10 bases per hybridizing block in the DNA diblocks (that is, 20-mer) are required for successful hybridization and, hence, DNA multilayer film formation. Films assembled using longer oligonucleotide blocks were more stable in low salt conditions, with the DNA multilayer films assembled from the 60-mer oligonucleotides remaining intact in solutions of about 25 mM NaCl. A systematic increase in film melting temperature ( T m) was observed for the DNA multilayer films (assembled on colloids) with increasing oligonucleotide length, ranging from 38.5 degrees C for the 20-mer films to 53 degrees C for the 60-mer films. Further, an alternating trend in T m of the DNA multilayer films was observed with layer number (AG or TC); DNA multilayer films terminated with an AG layer exhibited a higher T m (44-49 degrees C) than films with an outermost TC layer (ca. 38 degrees C), suggesting a rearrangement of the film structure upon hybridization of the outermost layer. This work shows that the stability of DNA multilayer films can be tuned by varying the length of the oligonucleotide building blocks, thus providing a versatile means to tailor the salt and thermal stability of DNA films, which is necessary for the application of such films.     

Contribution of histidine residues to the conformational stability of ribonuclease T1 and mutant Glu-58----Ala

The pK values of the histidine residues in ribonuclease T1 (RNase T1) are unusually high: 7.8 (His-92), 7.9 (His-40), and 7.3 (His-27) [Inagaki et al. (1981) J. Biochem. 89, 1185-1195]. In the RNase T1 mutant Glu-58----Ala, the first two pK values are reduced to 7.4 (His-92) and 7.1 (His-40). These lower pKs were expected since His-92 (5.5 A) and His-40 (3.7 A) are in close proximity to Glu-58 at the active site. The conformational stability of RNase T1 increases by over 4 kcal/mol between pH 9 and 5, and this can be entirely accounted for by the greater affinity for protons by the His residues in the folded protein (average pK = 7.6) than in the unfolded protein (pk approximately 6.6). Thus, almost half of the net conformational stability of RNase T1 results from a difference between the pK values of the histidine residues in the folded and unfolded conformations. In the Glu-58----Ala mutant, the increase in stability between pH 9 and 5 is halved (approximately 2 kcal/mol), as expected on the basis of the lower pK values for the His residues in the folded protein (average pK = 7.1). As a consequence, RNase T1 is more stable than the mutant below pH 7.5, and less stable above pH 7.5. These results emphasize the importance of measuring the conformational stability as a function of pH when comparing proteins differing in structure.     

Amperometric glucose biosensor based on layer-by-layer assembly of multilayer films composed of chitosan, gold nanoparticles and glucose oxidase modified Pt electrode

A new strategy for fabricating glucose biosensor was presented by layer-by-layer assembled chitosan (CS)/gold nanoparticles (GNp)/glucose oxidase (GOD) multilayer films modified Pt electrode. First, a cleaned Pt electrode was immersed in poly(allylamine) (PAA), and then transferred to GNp, followed by the adsorption of GOD (GOD/GNp/PAA/Pt). Second, the GOD/GNp/PAA/Pt electrode was immersed in CS, and then transferred to GNp, followed by the adsorption of GOD (GOD/GNp/CS/GOD/GNp/PAA/Pt). Third, different layers of multilayer films modified Pt electrodes were assembled by repeating the second process. Film assembling and characterization were studied by quart crystal microbalance, and properties of the resulting glucose biosensors were measured by electrochemical measurements. The results confirmed that the assembling process of multilayer films was simple to operate, the immobilized GOD displayed an excellent catalytic property to glucose, and GNp in the biosensing interface efficiently improved the electron transfer between analyte and electrode surface. The amperometric response of the biosensors uniformly increased from one to six layers of multilayer films, and then reached saturation after the seven layers. Among the resulting biosensors, the biosensor based on the six layers of multilayer films was best. It showed a wide linear range of 0.5-16 mM, with a detection limit of 7.0 microM estimated at a signal-to-noise ratio of 3, fast response time (within 8s). Moreover, it exhibited good reproducibility, long-term stability and interference free. This method can be used for constructing other thin films, which is a universal immobilization method for biosensor fabrication.     

Amperometric glucose biosensor based on multilayer films via layer-by-layer self-assembly of multi-wall carbon nanotubes, gold nanoparticles and glucose oxidase on the Pt electrode

A novel amperometric glucose biosensor based on the nine layers of multilayer films composed of multi-wall carbon nanotubes (MWCNTs), gold nanoparticles (GNp) and glucose oxidase (GOD) was developed for the specific detection of glucose. MWCNTs were chemically modified with the H₂SO₄–HNO₃ pretreatment to introduce carboxyl groups which were used to interact with the amino groups of poly(allylamine) (PAA) and cysteamine via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide cross-linking reaction, respectively. A cleaned Pt electrode was immersed in PAA, MWCNTs, cysteamine and GNp, respectively, followed by the adsorption of GOD, assembling the one layer of multilayer films on the surface of Pt electrode (GOD/GNp/MWCNTs/Pt electrode). Repeating the above process could assemble different layers of multilayer films on the Pt electrode. PBS washing was applied at the end of each assembly deposition for dissociating the weak adsorption. Film assembling and characterization were studied by transmission electron microscopy and quartz crystal microbalance, and properties of the resulting glucose biosensors were measured by electrochemical measurements. The marked electrocatalytic activity of Pt electrode based on multilayer films toward H₂O₂ produced during GOD enzymatic reactions with glucose permitted effective low-potential amperometric measurement of glucose. Taking the sensitivity and selectivity into consideration, the applied potential of 0.35 V versus Ag/AgCl was chosen for the oxidation detection of H₂O₂ in this work. Among the resulting glucose biosensors, the biosensor based on nine layers of multilayer films was best. It showed a wide linear range of 0.1–10 mM glucose, with a remarkable sensitivity of 2.527 μA/mM, a detection limit of 6.7 μM estimated at a signal-to-noise ratio of 3 and fast response time (within 7 s). Moreover, it exhibited good reproducibility, long-term stability and the negligible interferences of ascorbic acid, uric acid and acetaminophen. The study can provide a feasible approach on developing new kinds of oxidase-based amperometric biosensors, and can be used as an illustration for constructing various hybrid structures.     

The separation, partial purification and some properties of isoenzymes of aldolase from guinea-pig cerebral cortex

1. Aldolase isoenzymes from guinea-pig cerebral cortex were partially purified and separated by ammonium sulphate fractionation and chromatography on DEAE-cellulose. 2. Each purified isoenzyme was shown to be virtually uncontaminated with other forms by starch-gel electrophoresis. The quantitative distribution of the isoenzymes was: I, 6.2%; II, 5.2%; III, 15.3%; IV, 25.7%; V, 33.3%. 3. The pH optima for the five separated isoenzymes were similar; all were in the range pH7.5-8.0. Values for pK(a) (6.31-6.55) and pK(b) (9.45-9.59) were calculated from the data and suggested the involvement of histidine and lysine residues. 4. The stabilities of the isoenzymes were shown to be I=II>III>IV>V at pH4.4 in order of decreasing stability and are discussed in terms of subunit structure. 5. The substrate activity ratios (fructose 1,6-diphosphate/fructose 1-phosphate) were measured and all were in the range 12-44.     

Multilayers of a globular protein and a weak polyacid: role of polyacid ionization in growth and decomposition in salt solutions

Thin films obtained from a layer-by-layer deposition of a weak polycarboxylic acid and a positively charged globular protein were studied by in situ ATR-FTIR. The system was chicken egg lysozyme (Lys), bovine pancrease ribonuclease A (RNase), or bovine gamma-globulin (IgG) self-assembled with polycarboxylic acids. When the pH value was lowered below a critical point, the growth of films and their tolerance to decomposition by added sodium chloride improved dramatically. Stabilization of protein/polyacid films in salt solutions at lower pH values occurred due to the onset of nonelectrostatic interactions to intermolecular binding within protein/polyacid multilayers and was controlled by polyacid ionization within the film rather than the pH of the external solution. A fractional ionization of polyacid in the pH-stabilization region was lower with protein-containing films than for polyacid/linear polycation films, reflecting hindrance of the inter-association of protonated carboxylic groups by protein globules. Practical ramifications of the pH-stabilization effect might extend to areas of biotechnology and biomaterials.     

Catalytic mechanism of Zn2+-dependent polyol dehydrogenases: kinetic comparison of sheep liver sorbitol dehydrogenase with wild-type and Glu154-->Cys forms of yeast xylitol dehydrogenase

Co-ordination of catalytic Zn2+ in sorbitol/xylitol dehydrogenases of the medium-chain dehydrogenase/reductase superfamily involves direct or water-mediated interactions from a glutamic acid residue, which substitutes a homologous cysteine ligand in alcohol dehydrogenases of the yeast and liver type. Glu154 of xylitol dehydrogenase from the yeast Galactocandida mastotermitis (termed GmXDH) was mutated to a cysteine residue (E154C) to revert this replacement. In spite of their variable Zn2+ content (0.10-0.40 atom/subunit), purified preparations of E154C exhibited a constant catalytic Zn2+ centre activity (kcat) of 1.19+/-0.03 s(-1) and did not require exogenous Zn2+ for activity or stability. E154C retained 0.019+/-0.003% and 0.74+/-0.03% of wild-type catalytic efficiency (kcat/K(sorbitol)=7800+/-700 M(-1) x s(-1)) and kcat (=161+/-4 s(-1)) for NAD+-dependent oxidation of sorbitol at 25 degrees C respectively. The pH profile of kcat/K(sorbitol) for E154C decreased below an apparent pK of 9.1+/-0.3, reflecting a shift in pK by about +1.7-1.9 pH units compared with the corresponding pH profiles for GmXDH and sheep liver sorbitol dehydrogenase (termed slSDH). The difference in pK for profiles determined in 1H2O and 2H2O solvent was similar and unusually small for all three enzymes (approximately +0.2 log units), suggesting that the observed pK in the binary enzyme-NAD+ complexes could be due to Zn2+-bound water. Under conditions eliminating their different pH-dependences, wild-type and mutant GmXDH displayed similar primary and solvent deuterium kinetic isotope effects of 1.7+/-0.2 (E154C, 1.7+/-0.1) and 1.9+/-0.3 (E154C, 2.4+/-0.2) on kcat/K(sorbitol) respectively. Transient kinetic studies of NAD+ reduction and proton release during sorbitol oxidation by slSDH at pH 8.2 show that two protons are lost with a rate constant of 687+/-12 s(-1) in the pre-steady state, which features a turnover of 0.9+/-0.1 enzyme equivalents as NADH was produced with a rate constant of 409+/-3 s(-1). The results support an auxiliary participation of Glu154 in catalysis, and possible mechanisms of proton transfer in sorbitol/xylitol dehydrogenases are discussed.     

Carboxyl pK(a) values, ion pairs, hydrogen bonding, and the pH-dependence of folding the hyperthermophile proteins Sac7d and Sso7d

Sac7d and Sso7d are homologous, hyperthermophile proteins with a high density of charged surface residues and potential ion pairs. To determine the relative importance of specific amino acid side-chains in defining the stability and function of these Archaeal chromatin proteins, pK(a) values were measured for the acidic residues in both proteins using (13)C NMR chemical shifts. The stability of Sso7d enabled titrations to pH 1 under low-salt conditions. Two aspartate residues in Sso7d (D16 and D35) and a single glutamate residue (G54) showed significantly perturbed pK(a) values in low salt, indicating that the observed pH-dependence of stability was primarily due to these three residues. The pH-dependence of backbone amide NMR resonances demonstrated that perturbation of all three pK(a) values was primarily the result of side-chain to backbone amide hydrogen bonds. Few of the significantly perturbed acidic pK(a) values in Sac7d and Sso7d could be attributed to primarily ion pair or electrostatic interactions. A smaller perturbation of E48 (E47 in Sac7d) was ascribed to an ion pair interaction that may be important in defining the DNA binding surface. The small number (three) of significantly altered pK(a) values was in good agreement with a linkage analysis of the temperature, pH, and salt-dependence of folding. The linkage of the ionization of two or more side-chains to protein folding led to apparent cooperativity in the pH-dependence of folding, although each group titrated independently with a Hill coefficient near unity. These results demonstrate that the acid pH-dependence of protein stability in these hyperthermophile proteins is due to independent titration of acidic residues with pK(a) values perturbed primarily by hydrogen bonding of the side-chain to the backbone. This work demonstrates the need for caution in using structural data alone to argue the importance of ion pairs in stabilizing hyperthermophile proteins.     

Enzymes in polyelectrolyte complexes. The effect of phase transition on thermal stability

Penicillin amidase, alpha-chymotrypsin and urease have been immobilized in water-soluble nonstoichiometric polyelectrolyte complexes (N-PEC). N-PEC are formed by modified poly(N-ethyl-4-vinyl-pyridinium bromide) (polycation) and excess poly(methylacrylic acid) (polyanion). N-PEC are a new class of polymers capable, characteristically, of phase transitions solution in equilibrium precipitate induced by slight change in pH or ionic strength. Neither the chemical structure of the carrier nor the number of cross-linkages between an enzyme and a carrier change on phase transition. That gives an unique opportunity to elucidate the difference between enzymes immobilized on water-soluble and water-insoluble supports. A detailed study of the phase transition effect on thermal stability of the enzymes and protein-protein interactions has been carried out. The following effects were found. Pronounced thermal stabilization of penicillin amidase and urease may be achieved on two conditions: the enzyme is in the precipitate; (b) the enzyme is linked to the N-PEC nucleus. Then the thermal stability of N-PEC-bound penicillin amidase increases 7-fold at pH 5.7, 60 degrees C, and 300-fold at pH 3.1, 25 degrees C, compared to the native enzyme. For urease, the thermal stabilization increases 20-fold at pH 5.0, 70 degrees C. The localization of enzyme on N-PEC has been established by titration of alpha-chymotrypsin bound to a polycation or polyanion with basic pancreatic trypsin inhibitor. Both in solution (pH 6.1) and in N-PEC precipitate (pH 5.7), an alpha-chymotrypsin molecule bound to a polyanion is fully exposed to the solution. If the enzyme is bound to a polycation, only 20% of alpha-chymotrypsin molecules in the precipitate and 40% in solution retain their ability for protein-protein interactions. This means that a polycation-bound enzyme is localized in the hydrophobic nucleus of the complex, whereas the polyanion-bound enzyme sits on the hydrophilic shell of the complex. On pH-induced phase transition (pH decreases from 6.1 to 5.7), there occurs a stepwise decrease in penicillin amidase activity which is due to a 9.8-fold increase in the Km for 2-nitro-4-phenylacetamidobenzoic acid. Change of the catalytic activity and thermal stability of N-PEC-bound penicillin amidase is fully reversible and reproducible. Such soluble-insoluble immobilized enzymes with controllable thermal stability and activity may be used for simulating events in vivo and in biotechnology.     

Lactate dehydrogenase in an interpolyelectrolyte complex. Function and stability

A new method for encapsulating enzymes by multilayer polyelectrolyte coating is proposed. The method consists in a stepwise adsorption of polyelectrolytes from solution onto protein aggregates formed by salting out the proteins in highly concentrated salt solutions. Polystyrene sulfonate and fluorescence-labeled polyalylamine were used for capsule formation. The size of lactate dehydrogenase aggregates covered by four layer pairs of electrolytes was 1-5 microns, as indicated by fluorescence microscopy. The catalytic characteristics and stability of pig muscle lactate dehydrogenase (EC 1.1.1.13) incapsulated in multilayer electrolyte complex obtained by this method were studied. It was found that the affinity of the substrate pyruvate for the enzyme in the polyelectrolyte complex (K(M)) did not essentially change as compared with the free enzyme. Incapsulated lactate dehydrogenase showed the following features that distinguish it from the free form: (1) the lifetime in diluted solutions increases from 30 min (without capsules) to 1-2 days (in capsules); (2) a higher stability to basic denaturation (up to pH 10); and (3) the absence of substrate inhibition of enzyme in the polyelectrolyte complex. The changes in the catalytic characteristics of incapsulated lactate dehydrogenase are discussed in terms of an increase in effective pK values of amino acid perturbed by polyelectrolyte coating of enzyme.