Autohydrolysed <Emphasis Type="Italic">Tilapia nilotica</Emphasis> Fish Viscera as a Peptone Source in Bacteriocin Production

Fish processing generates large amounts of solid and liquid wastes. Many different by-products have been produced from fish processing wastes. Studies on solubilization of Bolti fish (Tilapia nilotica) viscera by endogenous enzymes at different pHs are described. Hydrolysis reactions were conducted with freshly thawed viscera utilizing an initial temperature gradient and terminated at various time points by heat inactivation of the enzymes. Various peptones obtained from hydrolysed visceral homogenates of Bolti fish residues showed their suitability for promoting the growth of lactic acid bacteria (mainly Lactobacillus sake Lb 706), microorganisms with particularly complex nutritional requirements especially peptidic sources. The assay of several treatments with L. sakei Lb 706, producer of the bacteriocin sakacin A, demonstrated that optimum conditions for biomass and bacteriocin production only imply a brief autohydrolysis at room temperature. The results showed that the Bolti fish hydrolysates gave remarkable results to those found in costly commercial media, specifically recommended for culturing and large-scale production of lactic acid bacteria.     

Characterization, Production, and Purification of Carnocin H, a Bacteriocin Produced by Carnobacterium 377

Carnocin H, a bacteriocin produced by a Carnobacterium sp., inhibited lactic acid bacteria, clostridia, enterococci, and some Staphylococcus aureus strains. Some strains of Listeria and Pediococcus were also sensitive to carnocin H. The bacteriocin was produced during the late stationary growth phase. Carnocin H was purified by cation exchange chromatography and reverse phase chromatography. Amino acid sequence and composition indicate that carnocin H is a novel bacteriocin belonging to the class II bacteriocins. The bacteriocin consists of approximately 75 amino acid residues with a highly cationic N-terminal containing six succeeding lysines. Activity, as measured by agar diffusion zones, was reduced at increased pH values, levels of indicator bacteria, NaCl, agar, and soy oil.     

The effect of carbon and nitrogen sources on bovicin HC5 production by Streptococcus bovis HC5

Aims:  To investigate the effect of media composition and agroindustrial residues on bovicin HC5 production by Streptococcus bovis HC5.
Methods and Results:  Batch cultures of S. bovis HC5 were grown in basal medium containing different carbon and nitrogen sources. The activity of cell-free and cell-associated bovicin HC5 was determined in culture supernatants and acidic extracts obtained from cell pellets, respectively. Streptococcus bovis HC5 produced bovicin using a variety of carbon and nitrogen sources. The highest specific activity was obtained in media containing 16 g l⁻¹ of glucose, after 16 h of incubation. The peak in cell-free and cell-associated bovicin HC5 activity was detected when S. bovis HC5 cultures reached stationary phase. The bovicin HC5 specific activity and bacterial cell mass increased approximately 3-fold when yeast extract and trypticase (0·5 and 1·0 g l⁻¹, respectively) were added together to the basal medium. Streptococcus bovis HC5 cultures produced bovicin HC5 in cheese whey and sugar cane juice and maximal volumetric productivity was obtained after 12 h of incubation.
Conclusions:  Streptococcus bovis HC5 is a versatile lactic acid bacterium that can utilize several carbon and nitrogen sources for bovicin HC5 production. This bacterium could be a useful model to study bacteriocin production in the rumen ecosystem.
Significance and Impact of the Study:  The use of agroindustrial residues as carbon sources could have an economical impact on bovicin HC5 production. To our knowledge, this is the first report to show the use of sugar cane juice for bacteriocin production by lactic acid bacteria.     

Peptones from autohydrolysed fish viscera for nisin and pediocin production

Various peptones obtained from hydrolysed visceral homogenates of four fishery residues showed their suitability for promoting the growth of lactic acid bacteria, micro-organisms with particularly complex requirements regarding peptidic nutrients. The assay of several treatments with two bacterial species, producers of the two main bacteriocins (nisin and pediocin) demostrated that optimum conditions only imply a brief autohydrolysis at natural pH and room temperature, with subsequent steam-flow stabilisation. Later kinetic analysis of the cultures of both bacteria in the best media provided parameters which, for production of both biomass and bacteriocins (the latter behaved in the majority of cases as a mixed metabolite), indicate comparable or superior results to those found in costly commercial media, specifically recommended for culture of lactic acid bacteria.     

Bacteriocin production with Lactobacillus amylovorus DCE 471 is improved and stabilized by fed-batch fermentation

Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source.     

Bacteriocin Production with Lactobacillus amylovorus DCE 471 Is Improved and Stabilized by Fed-Batch Fermentation

Amylovorin L471 is a small, heat-stable, and hydrophobic bacteriocin produced by Lactobacillus amylovorus DCE 471. The nutritional requirements for amylovorin L471 production were studied with fed-batch fermentations. A twofold increase in bacteriocin titer was obtained when substrate addition was controlled by the acidification rate of the culture, compared with the titers reached with constant substrate addition or pH-controlled batch cultures carried out under the same conditions. An interesting feature of fed-batch cultures observed under certain culture conditions (constant feed rate) is the apparent stabilization of bacteriocin activity after obtaining maximum production. Finally, a mathematical model was set up to simulate cell growth, glucose and complex nitrogen source consumption, and lactic acid and bacteriocin production kinetics. The model showed that bacterial growth was dependent on both the energy and the complex nitrogen source. Bacteriocin production was growth associated, with a simultaneous bacteriocin adsorption on the producer cells dependent on the lactic acid accumulated and hence the viability of the cells. Both bacteriocin production and adsorption were inhibited by high concentrations of the complex nitrogen source.     

Antimicrobial activity of lactic acid bacteria isolated from goat's milk and artisanal cheeses: characteristics of a bacteriocin produced by Lactobacillus curvatus IFPL105

A total of 203 lactic acid bacteria isolated from raw goat's milk and artisanal cheese were tested for antibacterial activity. Only two strains of Lactococcus lactis , one strain of Enterococcus faecalis and one strain of Lactobacillus curvatus were shown to produce a bacteriocin-like substance. Lactobacillus curvatus IFPL105 produced a heat-stable bacteriocin, which was hydrolysed by α-chymotrypsin, proteinase K and pancreatin and exhibited a broad spectrum of inhibitory activity. The bactericidal activity of the bacteriocin was more potent when sensitive strains were in the logarithmic growth phase, inducing cell lysis, as observed by decreases in optical density and release of intracellular marker enzymes. Curing experiments resulted in variants that lacked both bacteriocin activity and immunity to the bacteriocin. Plasmid profile analysis of the parental strain and the bacteriocin-negative variants indicated that a plasmid of about 46 kbp may be involved in bacteriocin production and immunity to this antibacterial compound.     

Influence of pH on growth and bacteriocin production byLactococcus lactis subsp.lactis 14ONWC during batch fermentation

The influence of pH on growth, and lactic acid and bacteriocin production byLactococcus lactis subsp.lactis 140 NWC was studied during batch fermentation in a lactose-based complex medium. Growth and lactic acid production were modelled using a simple logistic equation while substrate consumption was found to be a function growth and lactic acid production rate. The optimal pH for growth and lactic acid production was between 6.0 and 6.5. Bacteriocin production showed primary metabolite kinetics. pH had a dramatic effect on the production of the bacteriocin, lactococcin 140. A maximum activity of 15.4 × 10⁶ AU (arbitrary units) 1^–1 was obtained after 7 h at pH 5.5. Maximum bacteriocin activity was achieved before the end of growth and was followed by a decrease in activity, which was due to adsorption to the cells of the producing organism, possibly followed by degradation by specific proteases. Both bacteriocin production and degradation rates were higher at pH 5.0 and 5.5, resulting in sharper activity peaks than at pH 6.0 or 6.5. On the basis of the experimental results a qualitative model for bacteriocin production is proposed.     

Bacteriocin Production and Different Strategies for Their Recovery and Purification

Bacteriocins from lactic acid bacteria (LAB) are a diverse group of antimicrobial proteins/peptides, offering potential as biopreservatives, and exhibit a broad spectrum of antimicrobial activity at low concentrations along with thermal as well as pH stability in foods. High bacteriocin production usually occurs in complex media. However, such media are expensive for an economical production process. For effective use of bacteriocins as food biopreservatives, there is a need to have heat-stable wide spectrum bacteriocins produced with high-specific activity in food-grade medium. The main hurdles concerning the application of bacteriocins as food biopreservatives is their low yield in food-grade medium and time-consuming, expensive purification processes, which are suitable at laboratory scale but not at industrial scale. So, the present review focuses on the bacteriocins production using complex and food-grade media, which mainly emphasizes on the bacteriocin producer strains, media used, different production systems used and effect of different fermentation conditions on the bacteriocin production. In addition, this review emphasizes the purification processes designed for efficient recovery of bacteriocins at small and large scale.     

Isolation and characterization of a new bacteriocin from Lactobacillus gasseri KT7

A bacteriocin-producing Lactobacillus gasseri strain, KT7, was isolated from infant faeces. The supernatant fluid showed inhibitory activity not only against some lactic acid bacteria but also, against some pathogenic and food-spoilage species, including Clostridium, Listeria and Enterococcus. An antimicrobial peptide designated gassericin KT7 was isolated from Lactobacillus gasseri KT7. It was purified to homogeneity by a single four-step procedure: a crude supernatant fluid obtained from early stationary-phase culture in MRS medium was subjected to ammonium sulphate fractionation, CM-Sephadex cation-exchange chromatography, Phenyl-Sepharose hydrophobic chromatography and reverse-phase HPLC chromatography. Gassericin KT7 was sensitive to proteolytic enzymes, resistant to heat, active over a wide range of pH, and migrated as a 4.5-5.0 kDa peptide on SDS-PAGE. The bacteriocin was produced constitutively during exponential growth. It was bactericidal to sensitive cells and the bactericidal effect was not produced by cell lysis. The amino acid composition of the bacteriocin was determined and no modified amino acid was found among the residues identified.     

Purification,characterization and in vitro cytotoxicity of the bacteriocin from Pediococcus acidilactici K2a2-3 against human colon adenocarcinoma (HT29) and human cervical carcinoma (HeLa) cells

A bacteriocinogenic lactic acid bacterium (designated K2a2-3) isolated from the intestine of Philippine water buffalo was identified as Pediococcus acidilactici by 16S rRNA gene sequence analysis. The bacteriocin was purified by hydrophobic interaction chromatography, cation-exchange chromatography and reverse phase-high performance liquid chromatography. The purified protein has a molecular mass of 4,625.91 Da, quantified by electrospray ionization time-of-flight mass spectrometry. Based on a BLAST homology search of a partial sequence of 39 amino acid residues and the presence of the structural gene papA, detected through polymerase chain reaction, it was identified as very similar to pediocin PA-1. It was active against a wide spectrum of lactic acid bacteria and Listeria innocua. Partially-purified bacteriocin samples, conducted using pH-mediated bacteriocin extraction method, were found to be cytotoxic against human colon adenocarcinoma (HT29) and human cervical carcinoma (HeLa) cells in vitro, as determined by MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay.     

Polyphasic screening, homopolysaccharide composition, and viscoelastic behavior of wheat Sourdough from a Leuconostoc lactis and Lactobacillus curvatus exopolysaccharide-producing starter culture

After isolation from different doughs and sourdoughs, 177 strains of lactic acid bacteria were screened at the phenotypic level for exopolysaccharide production on media containing different carbohydrate sources. Two exopolysaccharide-producing lactic acid bacteria (Lactobacillus curvatus 69B2 and Leuconostoc lactis 95A) were selected through quantitative analysis on solid media containing sucrose and yeast extract. The PCR detection of homopolysaccharide (gtf and lev) and heteropolysaccharide (epsA, epsB, epsD and epsE, and epsEFG) genes showed different distributions within species and strains of the lactic acid bacteria studied. Moreover, in some strains both homopolysaccharide and heteropolysaccharide genes were detected. Proton nuclear magnetic resonance spectra suggest that Lactobacillus curvatus 69B2 and Leuconostoc lactis 95A produced the same exopolysaccharide, which was constituted by a single repeating glucopyranosyl unit linked by an α-(1→6) glycosidic bond in a dextran-type carbohydrate. Microbial growth, acidification, and viscoelastic properties of sourdoughs obtained by exopolysaccharide-producing and nonproducing lactic acid bacterial strains were evaluated. Sourdough obtained after 15 h at 30°C with exopolysaccharide-producing lactic acid bacteria reached higher total titratable acidity as well as elastic and dissipative modulus curves with respect to the starter not producing exopolysaccharide, but they showed similar levels of pH and microbial growth. On increasing the fermentation time, no difference in the viscoelastic properties of exopolysaccharide-producing and nonproducing samples was observed. This study suggests that dextran-producing Leuconostoc lactis 95A and Lactobacillus curvatus 69B2 can be employed to prepare sourdough, and this would be particularly useful to improve the quality of baked goods while avoiding the use of commercially available hydrocolloids as texturizing additives.     

NMR solution structure of the precursor for carnobacteriocin B2, an antimicrobial peptide from Carnobacterium piscicola.

Type IIa bacteriocins, which are isolated from lactic acid bacteria that are useful for food preservation, are potent antimicrobial peptides with considerable potential as therapeutic agents for gastrointestinal infections in mammals. They are ribosomally synthesized as precursors with an N-terminal leader, typically 18-24 amino acid residues in length, which is cleaved during export from the producing cell. We have chemically synthesized the full precursor of carnobacteriocin B2, precarnobacteriocin (preCbnB2), which has a C-terminal amide rather than a carboxyl, and also produced preCbnB2(1-64), which is missing two amino acid residues at the C-terminus (Arg65 and Pro66), via expression in Escherichia coli as a maltose-binding protein fusion that is then cut with Factor Xa. PreCbnB2(1-64) is readily labeled with (15)N and (13)C for NMR studies using the latter approach. Multidimensional NMR analysis of preCbnB2(1-64) shows that, like the parent bacteriocin, it exists as a random coil in water but assumes a defined conformation in water/trifluoroethanol mixtures. In 70 : 30 trifluoroethanol/water, the 3D structure of the preCbnB2 section corresponding to the mature bacteriocin is essentially the same as reported previously by us for carnobacteriocin B2 (CbnB2). This structure maintains the highly conserved alpha-helix corresponding to residues 20-38 of CbnB2 that is believed to be responsible for interaction with a target receptor in sensitive cells, including Listeria monocytogenes. PreCbnB2 also has a second alpha-helix from residues 3-13 (i.e. -15 to -5 relative to CbnB2) in the leader section of the peptide. This helix appears to be conserved in related type IIa bacteriocin precursors based on sequence analysis. It is likely to be a key recognition element for export and processing, and is probably responsible for the considerably reduced antimicrobial activity of preCbnB2. The latter effect may assist the producing cell in avoiding the toxic effects of the bacteriocin. This is the first 3D structure determined for a prebacteriocin from lactic acid bacteria.     

Characterization of a bacteriocin, Thermophilin 1277, produced by Streptococcus thermophilus SBT1277

AIMS: To assess the inhibitory activity and the influence of culture condition on the growth and bacteriocin, Thermophilin 1277, production by Streptococcus thermophilus SBT1277. METHODS AND RESULTS: Thermophilin 1277, which was produced by S. thermophilus SBT1277, showed an antimicrobial activity against several lactic acid bacteria and food spoilage bacteria including Clostridium butylicum, C. sprogenes and Bacillus cereus. Thermophilin 1277 was inactivated by proteinase K. Heating treatment did not affect the antimicrobial activity. The partially purified Thermophilin 1277 had an apparent molecular mass of 3.7 kDa. N-terminal sequence analysis revealed 15 amino acid residues that correspond with amino acid sequence of the lantibiotics bovicin HJ50 produced by Streptococcus bovis HJ50. The effects of culture condition for the bacteriocin production by S. thermophilus SBT1277 were studied. During the batch fermentation, Thermophilin 1277 was produced in M17 broth, but no bacteriocin production occurred in the sucrose-tryptone (ST) broth. Bacteriocin production was detected in pH controlled ST broth at pH values of 5.5-6.5. CONCLUSIONS: Thermophilin 1277 production from S. thermophilus strain depended on the culture conditions. Some characters and N-terminal amino acid sequence of Thermophilin 1277 differed from bacteriocins produced by S. thermophilus reported previously. SIGNIFICANCE AND IMPACT OF THE STUDY: Streptococcus thermophilus SBT1277 or its bacteriocin which has a wide inhibitory spectrum has a potential use as a biopreservative in dairy products.     

Characteristics and identification of bacteriocins produced by Lactococcus lactis subsp. lactis 194-K

The Lactococcus lactis subsp. lactis 194-K strain has been established to be able to produce two bacteriocins, one of which was identified as the known lantibiotic nisin A, and the other 194-D bacteriocin represents a polypeptide with a 2589-Da molecular mass and comprises 20 amino acid residues. Both bacteriocins were produced in varying proportions in all of the studied culture media, which support the growth of the producer. Depending on the cultivation medium, the nisin A content was 380- to 1123-fold lower in the 194-K stain culture broth than that of the 194-D peptide. In comparision to nisin A Bacteriocin 194-D possessed a wide range of antibacterial activity and suppressed the growth of both Gram-positive and Gram-negative bacteria. An optimal medium for 194-D bacteriocin synthesis was shown to be a fermentation medium which contained yeast extract, casein hydrolysate, and potassium phosphate. The biosynthesis of bacteriocin 194-D by the 194-K strain in these media occurred parallel to producer growth, and its maximal accumulation in the culture broth was observed at14–20 h of the strain’s growth.     

Biochemical and genetic characterization of enterocin A from Enterococcus faecium, a new antilisterial bacteriocin in the pediocin family of bacteriocins.

A new bacteriocin has been isolated from an Enterococcus faecium strain. The bacteriocin, termed enterocin A, was purified to homogeneity as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal amino acid sequencing, and mass spectrometry analysis. By combining the data obtained from amino acid and DNA sequencing, the primary structure of enterocin A was determined. It consists of 47 amino acid residues, and the molecular weight was calculated to be 4,829, assuming that the four cysteine residues form intramolecular disulfide bridges. This molecular weight was confirmed by mass spectrometry analysis. The amino acid sequence of enterocin A shared significant homology with a group of bacteriocins (now termed pediocin-like bacteriocins) isolated from a variety of lactic acid-producing bacteria, which include members of the genera Lactobacillus, Pediococcus, Leuconostoc, and Carnobacterium. Sequencing of the structural gene of enterocin A, which is located on the bacterial chromosome, revealed an N-terminal leader sequence of 18 amino acid residues, which was removed during the maturation process. The enterocin A leader belongs to the double-glycine leaders which are found among most other small nonlantibiotic bacteriocins, some lantibiotics, and colicin V. Downstream of the enterocin A gene was located a second open reading frame, encoding a putative protein of 103 amino acid residues. This gene may encode the immunity factor of enterocin A, and it shares 40% identity with a similar open reading frame in the operon of leucocin AUL 187, another pediocin-like bacteriocin.     

Bacteriocin production by <Emphasis Type="Italic">Streptococcus thermophilus</Emphasis> in complex growth media

Objective

To test if the production of bacteriocins by Streptococcus thermophilus is influenced when grown in various complex media commonly used for the culturing of lactic acid bacteria.

Results

Forty-one strains of S. thermophilus were screened for the production of bacteriocins in tryptone/yeast extract/lactose (TYL), M17-lactose (M17L), M17-glucose (M17G) and MRS media. Two strains, ST144 and ST145, were identified as novel bacteriocin producers, with constitutive production observed only in M17G. Strains ST110, ST114 and ST134 constitutively produced bacteriocins in all growth media but ST114 required growth in MRS for its antimicrobial activity to persist in a 24 h culture. The addition of a synthetic quorum sensing peptide (BlpC) induced bacteriocin production by ST106 in all media tested; and by ST118 in TYL and M17L. Strain ST109, which constitutively produced a bacteriocin in TYL and M17 broths, required BlpC induction when grown in MRS. Real-time PCR analysis showed that the natural expression of blpC in ST109 was lower when grown in MRS, suggesting that something in medium interfered with the blp quorum sensing system.

Conclusion

As the choice of growth medium influences both bacteriocin production and peptide stability, several types of production media should be tested when screening for novel bacteriocin-producing strains of S. thermophilus.

     

青海湖裸鲤肠道乳酸菌多样性与抑菌活性

【目的】通过生理生化特性,结合16S r RNA基因序列分析研究青海湖裸鲤肠道乳酸菌分离株的多样性,并对这些代表株的抑菌活性进行初步探讨,以期筛选具有高效抑菌活性的鱼源益生菌。【方法】对分离的47株乳酸菌代表株进行p H、温度生长范围、耐盐性等生理生化特征检测,结合16S r RNA基因序列对已分离到的乳酸菌进行基因分型和菌种鉴定,采用牛津杯双层平板法检测乳酸菌代表株的抑菌活性。【结果】鉴定结果显示:23株为Lactobacillus fuchuensis(48.94%),12株为Lactobacillus curvatus(25.53%),3株为Leuconostoc fallax(6.38%),2株为Lactobacillus sakei(4.26%),2株为Weissella ceti(4.26%);2株为Lactococcus cremoris(4.26%),1株为Leuconostoc lactis(2.13%),1株为Weissella minor(2.13%),1株为Enterococcus devriesei(2.13%)。qz1217、qz1196、qz1220所在的A、B、C三组乳酸菌在5-50°C的温度范围内生长良好,qz1196、qz1220所在的B、C组在pH 3.0-10.0的范围内生长良好,几乎所有乳酸菌都具有耐6.5%盐浓度特性。13株乳酸菌菌株对6种病原菌都具有抑制作用。通过排除酸、过氧化氢实验,发现上清液仍然具有抑菌活性。对qz1251发酵液进行蛋白酶处理,抑菌活性消失,确定其抑菌物质属于蛋白类物质,是一种细菌素。【结论】青海湖裸鲤肠道附着乳酸菌的多样性为益生性乳酸菌的筛选提供优质资源及数据参考。     

Isolation and properties of a bacteriocin-producing Carnobacterium piscicola isolated from fish.

A facultative psychrotrophic lactic acid bacterium isolated from fresh fish was identified as Carnobacterium piscicola on the basis of carbohydrate utilization, G + C content and 16S RNA analysis. Its bacteriocin, designated carnocin UI49, is produced during the mid-exponential phase of growth at temperatures between 15 degrees C and 34 degrees C. Carnocin UI49 is active against a large number of closely-related lactic acid bacteria including carnobacteria, lactobacilli, pediococci and lactococci. Furthermore, the bacteriocin has a bactericidic mode of action which results in lysis of sensitive cells. Maximum bactericidal activity is observed at 34 degrees C with a decrease in activity down to 15 degrees C where it is completely abolished.     

Production, recovery and purification of bacteriocins from lactic acid bacteria

Bacteriocins produced by lactic acid bacteria are a heterogeneous group of peptide inhibitors which include lantibiotics (class I, e.g. nisin), small heat-stable peptides (class II, e.g. pediocin AcH/PA1) and large heat-labile proteins (class III, e.g. helveticin J). Many bacteriocins belonging to the first two groups can be successfully used to inhibit undesirable microorganisms in foods, but only nisin is produced industrially and is licensed for use as a food preservative in a partially purified form. This review focuses on the production and purification of class I and class II bacteriocins from lactic acid bacteria. Bacteriocin production is growth associated but the yield of bacteriocin per unit biomass is affected by several factors, including the producing strain, media (carbohydrate and nitrogen sources, cations, etc.) and fermentation conditions (pH, temperature, agitation, aeration and dilution rate in continuous fermentations). Continuous fermentation processes with cell recycle or immobilized cells can result in a dramatic improvement in productivity over batch fermentations. Several simple recovery processes, based on adsorbing bacteriocin on resins or silica compounds, have been developed and can be used to build integrated production processes. Received: 29 December 1998 / Received revision: 23 April 1999 / Accepted: 23 April 1999