Mechanisms controlling division-plane positioning

A critical and irreversible step in the cell division cycle is cytokinesis which physically separates the two daughter cells. This event is consequently subject to tight spatial and temporal regulation. This review focuses on the spatial regulatory mechanisms controlling the position of the division plane. Studies performed in prokaryotic and eukaryotic systems have revealed that various signal-emitting spatial cues – mitotic spindle, nucleus, nucleoid or cell tips – can favour or inhibit the assembly of the cytokinetic apparatus in their vicinity. Most often, several mechanisms operate in parallel to integrate spatial information and promote faithful genome segregation as well as proper cytoplasmic division. We primarily describe the spatial regulatory mechanisms operating in the fission yeast model system, where a detailed molecular understanding of cytokinesis has been achieved. In this system, spatial regulations target a major factor controlling the position of the division plane, the anillin-like protein Mid1. These mechanisms are then compared to spatial regulatory mechanisms prevailing in animal cells and rod-shaped bacteria.     

Influence of cell geometry on division-plane positioning

The spatial organization of cells depends on their ability to sense their own shape and size. Here, we investigate how cell shape affects the positioning of the nucleus, spindle and subsequent cell division plane. To manipulate geometrical parameters in a systematic manner, we place individual sea urchin eggs into microfabricated chambers of defined geometry (e.g., triangles, rectangles, and ellipses). In each shape, the nucleus is positioned at the center of mass and is stretched by microtubules along an axis maintained through mitosis and predictive of the future division plane. We develop a simple computational model that posits that microtubules sense cell geometry by probing cellular space and orient the nucleus by exerting pulling forces that scale to microtubule length. This model quantitatively predicts division-axis orientation probability for a wide variety of cell shapes, even in multicellular contexts, and estimates scaling exponents for length-dependent microtubule forces.     

Nuclear positioning: mechanisms and functions

The nucleus is the largest organelle in the cell and its position is dynamically controlled in space and time, although the functional significance of this dynamic regulation is not always clear. Nuclear movements are mediated by the cytoskeleton which transmits pushing or pulling forces onto the nuclear envelope. Recent studies have shed light on the mechanisms regulating nuclear positioning inside the cell. While microtubules have been known for a long time to be key players in nuclear positioning, the actin and cytoplasmic intermediate filament cytoskeletons have been implicated in this function more recently and various molecular links between the nuclear envelope and cytoplasmic elements have been identified. In this review, we summarize the recent advances in our understanding of the molecular mechanisms involved in the regulation of nuclear localization in various animal cells and give an overview of the evidence suggesting a crucial role of nuclear positioning in cell polarity and physiology and the consequences of nuclear mispositioning in human pathologies.     

Nuclear migration and positioning in filamentous fungi

Genetic analyses of nuclear distribution mutants have indicated that functions of the microtubule motor, cytoplasmic dynein, and its regulators are important for nuclear positioning in filamentous fungi. Here we review these studies and also present the need to further dissect how dynein and its associated microtubule cytoskeleton are involved mechanistically in nuclear positioning in the multinucleated hyphae.     

State-dependent mechanisms of LTP expression revealed by optical quantal analysis

The expression mechanism of long-term potentiation (LTP) remains controversial. Here we combine electrophysiology and Ca(2+) imaging to examine the role of silent synapses in LTP expression. Induction of LTP fails to change p(r) at these synapses but instead mediates an unmasking process that is sensitive to the inhibition of postsynaptic membrane fusion. Once unmasked, however, further potentiation of formerly silent synapses leads to an increase in p(r). The state of the synapse thus determines how LTP is expressed.     

Biophysical properties of stable microtubules in neurites revealed by optical techniques

We tested the stability of microtubules in the neurites of cultured dorsal root ganglion cells by dissolving the cytoplasmic membrane with detergent and exposing them to defined extracellular medium under the microscope. Smooth cytoplasmic filaments visualized after membrane removal were suggested to be microtubules by the preservation of all of the filaments in the presence but not in the absence of taxol. They were further confirmed to be microtubules by immunostaining with anti-tubulin antibody. Significant number of microtubules in the established neurites remained longer than 1 hour after membrane removal. To investigate their stabilization mechanism, we transected the exposed microtubules by laser microbeam irradiation and observed their length changes with video-enhanced microscopy. Microtubule fragments started to shorten on both sides of the transection site, more rapidly from the newly generated plus ends than from the minus ends. The maximal rate as well as the pattern of shortening correlated with the time of transection; microtubules transected later than 30 min after membrane removal shortened at rates less than 20 microm/min and typically with intermittent pauses, while the more labile microtubules included in the earlier transections shortened continuously at higher rates. Microtubules in neurites were thus stabilized by (1) stopping disassembly at local sites including the plus ends, and (2) slowing disassembly along the length. Observations of the course of disassembly also suggested the presence of specialized points along microtubules which is involved in anchoring microtubules to the substratum or transiently stopping disassembly.     

Assessment of mechanical properties of adherent living cells by bead micromanipulation: comparison of magnetic twisting cytometry vs optical tweezers

We compare the measurements of viscoelastic properties of adherent alveolar epithelial cells by two micromanipulation techniques: (i) magnetic twisting cytometry and (ii) optical tweezers, using microbeads of same size and similarly attached to F-actin. The values of equivalent Young modulus E, derived from linear viscoelasticity theory, become consistent when the degree of bead immersion in the cell is taken into account. E-values are smaller in (i) than in (ii): approximately 34-58 Pa vs approximately 29-258 Pa, probably because higher stress in (i) reinforces nonlinearity and cellular plasticity. Otherwise, similar relaxation time constants, around 2 s, suggest similar dissipative mechanisms.     

The chromatin fiber: structure and conformational transitions as revealed by optical anisotropy studies

Structure and conformational transitions of the chromatin fiber as revealed by optical anisotropy studies are reviewed. The data in the literature do not allow a definite interpretation; in fact some of them are contradictory. The major findings are reported here and an attempt is made to analyse them with respect to the internal dynamics and the various models suggested for the organization of the chromatin fiber.     

Plasmodium falciparum: cloning by single-erythrocyte micromanipulation and heterogeneity in vitro

Natural isolates of Plasmodium falciparum represent a genetically heterogeneous population of parasites. To obtain stable strains of the parasites for long term experiments, a rapid and definitive method of cloning was developed using micropipets and a micromanipulator. Homogeneous parasite clones prepared by this technique were characterized and compared with the parent isolates during 4 years of continuous culture. The process of phenotypic dominance and selection of drug resistance which occur in nature was also simulated in vitro by evaluating population dynamics of two cocultured isolates of P. falciparum.     

Production of identical twin rabbits by micromanipulation of embryos

The research was conducted to improve micromanipulation procedures with rabbit embryos, including the production of genetically identical progeny. In the first experiment, embryos in different stages of development were used for micromanipulation by removing half of the blastomeres with a beveled aspirating pipette. Embryos 74-78 h postovulatory, in the late compacted morula or early blastocyst stage, were demonstrated to be best for micromanipulation. When embryos at this stage were halved, 77% (64/83) developed into blastocysts compared to 78% (65/83) for the intact control. In the second experiment, the survival of demi-embryos in original versus foreign zonae was tested. Young born from the demi-embryos transferred within original zonae (33%) were not significantly different (p greater than 0.05) from those transferred in foreign zonae (24%). Significantly more offspring, however, were obtained from intact control embryos (58%, p less than 0.01). In the third experiment, identical monozygotic twins were produced from Day 3 embryos, after modification of the aspirating pipette by further sharpening it to a fine point with a microforge. Thirty-four percent young (11) were obtained after microsurgery compared to 36% for intact control embryos transferred. Among the demi-embryos, a pair of albino and a pair of Dutch-belted young were identical twins.     

Measurements of growth cone adhesion to culture surfaces by micromanipulation

Neurons were grown on plastic surfaces that were untreated, or treated with polylysine, laminin, or L1 and their growth cones were detached from their culture surface by applying known forces with calibrated glass needles. This detachment force was taken as a measure of the force of adhesion of the growth cone. We find that on all surfaces, lamellipodial growth cones require significantly greater detachment force than filopodial growth cones, but this differences is, in general, due to the greater area of lamellipodial growth cones compared to filopodial growth cones. That is, the stress (force/unit area) required for detachment was similar for growth cones of lamellipodial and filopodial morphology on all surfaces, with the exception of lamellipodial growth cones on L1-treated surfaces, which had a significantly lower stress of detachment than on other surfaces. Surprisingly, the forces required for detachment (760-3,340 mudynes) were three to 15 times greater than the typical resting axonal tension, the force exerted by advancing growth cones, or the forces of retraction previously measured by essentially the same method. Nor did we observe significant differences in detachment force among growth cones of similar morphology on different culture surfaces, with the exception of lamellipodial growth cones on L1-treated surfaces. These data argue against the differential adhesion mechanism for growth cone guidance preferences in culture. Our micromanipulations revealed that the most mechanically resistant regions of growth cone attachment were confined to quite small regions typically located at the ends of filopodia and lamellipodia. Detached growth cones remained connected to the substratum at these regions by highly elastic retraction fibers. The closeness of contact of growth cones to the substratum as revealed by interference reflection microscopy (IRM) did not correlate with our mechanical measurements of adhesion, suggesting that IRM cannot be used as a reliable estimator of growth cone adhesion.     

Comparison of plant cell turgor pressure measurement by pressure probe and micromanipulation

The conventional method of measuring plant cell turgor pressure is the pressure probe but applying this method to single cells in suspension culture is technically difficult and requires puncture of the cell wall. Conversely, compression testing by micromanipulation is particularly suited to studies on single cells, and can be used to characterise cell wall mechanical properties, but has not been used to measure turgor pressure. In order to demonstrate that the micromanipulation method can do this, pressure measurements by both methods were compared on single suspension-cultured tomato (Lycopersicon esculentum vf36) cells and generally were in good agreement. This validates further the micromanipulation method and demonstrates its capability to measure turgor pressure during water loss. It also suggests that it might eventually be used to estimate plant cell hydraulic conductivity.     

Lamin B distribution and association with peripheral chromatin revealed by optical sectioning and electron microscopy tomography

We have used a combination of immunogold staining, optical sectioning light microscopy, intermediate voltage electron microscopy, and EM tomography to examine the distribution of lamin B over the nuclear envelope of CHO cells. Apparent inconsistencies between previously published light and electron microscopy studies of nuclear lamin staining were resolved. At light microscopy resolution, an apparent open fibrillar network is visualized. Colocalization of lamin B and nuclear pores demonstrates that these apparent fibrils, separated by roughly 0.5 micron, are anti-correlated with the surface distribution of nuclear pores; pore clusters lie between or adjacent to regions of heavy lamin B staining. Examination at higher, EM resolution reveals that this apparent lamin B network does not correspond to an actual network of widely spaced, discrete bundles of lamin filaments. Rather it reflects a quantitative variation in lamin staining over a roughly 0.5-micron size scale, superimposed on a more continuous but still complex distribution of lamin filaments, spatially heterogeneous on a 0.1-0.2-micron size scale. Interestingly, lamin B staining at this higher resolution is highly correlated to the underlying chromatin distribution. Heavy concentrations of lamin B directly "cap" the surface of envelope associated, large-scale chromatin domains.     

Analysis of cell structural and functional diversity by combination of micromanipulation and microfluorimetry

Fluorescent molecules are widely used to study quantitative cell properties, such as density of different antigenic markers or membrane responses to various stimuli. In most cases, studies are done on bulk cell populations with a spectrofluorimeter or at the single cell level with a cytofluorograph. However, only microspectrofluorimetric techniques allow continuous recording of dynamic events undergone by individual cells. The aim of the present report was twofold: first, to describe a methodology easily accessible to cell biologists that allows simultaneous manipulation of single cells and measurements of their fluorescence properties; and second, through this methodology to study quantitative aspects of cell structure and function such as binding of a fluorescein-labeled lectin, transfer of fluorescent molecules between labeled and unlabeled cells brought in close contact, or fluorescence response of individual cells stimulated after being loaded with a potential-sensitive dye. We conclude that the understanding of many aspects of cell structure and behavior requires that individual cells be studied under dynamic conditions and for prolonged periods of time.