Alloantigen bound to agarose beads and syngeneic carrier cells are capable of stimulating mouse cytolytic T lymphocytes in vitro.

Bead-bound antigen was prepared by coupling alloantigen covalently to agarose beads. Alloantigen-bearing syngeneic carrier cells were prepared by dilution of detergent solubilized alloantigen in the presence of syngeneic spleen cells. Both types of antigen were compared to spleen cells and reconstituted membrane fragments for the ability to stimulate cytolytic thymus-dependent lymphocytes in vitro. All these types of antigen could stimulate immune but not nonimmune spleen cells to form cytolytic T lymphocytes. The amount of lytic activity obtained with the bead-bound antigen was found to be only dependent upon the amount of H-2 antigen present in the culture and independent of the number of beads.     

Growth of endothelial and HeLa cells on a new multipurpose microcarrier that is positive,negative or collagen coated

A new cell culture microcarrier that can be covalently bonded by cell attachment proteins and can be thin-sectioned for electron microscopy was synthesized. It was easily made by sulfonating cross-linked polystyrene beads for a negative surface charge followed by covalent attachment of polyethylenimine for a positive charge. Cell attachment proteins, e.g. collagen, was covalently bonded directly to the microcarrier using a carbodiimide or after activating the microcarrier surface with glutaraldehyde. HeLa-S3 cells attached, spread and grew to confluence more efficiently on the positive microcarriers and those coated with collagen than on the negative ones. Endothelial cells grew best on those with a negative surface charge. The nature of the microcarrier surface was not the only aspect involved in cell adhesion but also the type of serum proteins adsorbed. Qualitatively different proteins coated the microcarriers depending upon whether the carrier was negative, positive or coated with collagen. Comparison of various types of available microcarriers indicated that the modified cross-linked polystyrene beads used here were best for transmission and scanning electron microscopy. Endothelial cells grown on the microcarriers had the same ultrastructure as cells grown in monolayers in culture dishes. Of a variety of microcarriers tested the modified cross-linked polystyrene beads were the only ones that could be used for both ultrastructural and biochemical techniques.     

Single-bead-based immunofluorescence assay for snake venom detection

In this communication, we reported a rapid and sensitive immunofluorescence method for the detection of snake venom by using microscale polystyrene beads as platform combined with semiconductor quantum dots (Qdots) as fluorescence label. Briefly, control rabbit IgG or capture antibody for venom was covalently immobilized onto the microspheres (surface activated with carboxyl group, dyed with different color) to form the control or capture beads. When incubated with the testing samples, the venom binds to the specific capture beads to form the complex through antibody-antigen interaction. Then, the second antibody conjugated Qdot was added, which targeted the Qdot to bind to the capture bead/antigen complex. The complex can be directly observed under a UV microscope. The system was applied to the testing of Naja kaouthia venom. Fluorescent microscopic images of QD-labeled capture beads demonstrated that QD-antibody conjugates could evenly and completely attach to the surface of capture beads, indicating that the conjugated antibody molecules remained active and were able to recognize their specific target in solution. The detection limit of this method was 5-10 ng/mL. The detection could be completed within 3 h.     

Evaluation of magnetic polymer micro-beads as carriers of immobilised biocatalysts for selective and stereoselective transformations

The kinetic, selective and stereoselective properties of enzyme immobilised on magnetic polymer beads with diameters in the range 1 microm was studied with penicillin amidase from E. coli. The enzyme was immobilised on epoxy and glutaraldehyde-activated poly(vinyl alcohol), poly(methylmetacrylate) and poly(vinyl acetate-divinylbenzene) magnetic beads. The amount of covalently bound active protein was dependent on the chemical modification of the matrix and increased at higher ionic strength of the immobilisation buffer. The small size of the magnetic beads, that reduces mass transfer limitations, and the decreased charge density in the electric double layer resulted in lower apparent Km values and higher efficiency for benzylpenicillin hydrolysis, higher stereoselectivity in condensation of R-phenylglycine amide with S- and R-Phe and in hydrolysis of racemic phenylacetyl-Phe and higher selectivity in kinetically controlled synthesis of cephalexin compared to the enzyme immobilised on larger and porous carriers.     

Superparamagnetic poly(methyl methacrylate) beads for nattokinase purification from fermentation broth

An effective method for purification of nattokinase from fermentation broth using magnetic poly(methyl methacrylate) (PMMA) beads immobilized with p-aminobenzamidine was proposed in this study. Firstly, magnetic PMMA beads with a narrow size distribution were prepared by spraying suspension polymerization. Then, they were highly functionalized via transesterification reaction with polyethylene glycol. The surface hydroxyl-modified magnetic beads obtained were further modified with chloroethylamine to transfer the surface amino-modified magnetic functional beads. The morphology and surface functionality of the magnetic beads were examined by scanning electron microscopy and Fourier transform infrared. An affinity ligand, p-aminobenzamidine was covalently immobilized to the amino-modified magnetic beads by the glutaraldehyde method for nattokinase purification directly from the fermentation broth. The purification factor and the recovery of the enzyme activity were found to be 8.7 and 85%, respectively. The purification of nattokinase from fermentation broth by magnetic beads only took 40 min, which shows a very fast purification of nattokinase compared to traditional purification methods.     

Cyclodextrin-linked alginate beads as supporting materials for Sphingomonas cloacae, a nonylphenol degrading bacteria

Calcium alginate beads covalently linked with alpha-cyclodextrin (alpha-CD-alginate beads) were prepared and examined for their ability to serve as a supporting matrix for bacterial degradation of nonylphenol, an endocrine disruptor. Column chromatographic experiment using alpha-CD-alginate beads with diameter of 657+/-82 microm and with degree of CD substitution of 0.16 showed a strong affinity for nonylphenol adsorption. Although addition of alpha-CD (2.7-27 mM) to the culture broth of Sphingomonas cloacae retarded nonylphenol degradation, the immobilized bacteria on the CD-alginate beads were effective for the degradation. Batch degradation tests using the immobilized bacteria on alpha-CD-alginate-beads showed 46% nonylphenol recovery after 10-day incubation at 25+/-2 degrees C, and the recovery reached to about 17% when wide and shallow incubation tubes were used to facilitate uptake of the viscous liquid of nonylphenol on the surface of the medium. Scanning electron microscopic photographs revealed that multiplicated bacteria was present both on the surface and inside the beads and the matrix of CD-alginate was stable and suitable during 10-day incubation.     

Cytochemical hybridisation with fluorochrome-labelled RNA

Summary A new method to localise specific DNA sequences in microscopic preparations by hybridocytochemistry using fluorochrome labelled complementary RNA has been described recently (Bauman et al. 1981). The present paper describes a procedure to increase the sensitivity of this method. RNA complementary to kinetoplasts DNA of Crithidia luciliae was labelled with fluorescein and hybridised with Sephadex beads to which kinetoplast DNA or heterologous DNA had been covalently bound as well as to Crithidia luciliae preparations. The fluorescein-labelled RNA was found to hybridize specifically with homologous DNA both on the beads and in the cells. The sensitivity of the hybrid detection could be increased by applying an indirect immunofluorescence reaction using rabbit antiserum raised against the hapten fluorescein as has been described for the amplification of a direct immunofluorescence reaction by Schmitz and Kampa (1979). The complete procedure resulted in an amplification of the original specific fluorescence both on the beads and in the cells. The increase was quantified by microfluorimetry. Several aspects of the immunocytochemical amplifying reaction were quantitatively investigated using Sephadex beads to which poly(A) or DNA was coupled and FITC-labelled poly(U) or cRNA was hybridised. A 5- to 10-fold amplification was obtained both in the beads and on the cell preparations. When the amplifying steps were repeated a proportional increase in background fluorescence was observed.This work was supported by the Netherlands Organisation for the Advancement of Pure Research (Z.W.O.)     

Coupling polylysine to glass beads for plasma membrane isolation

Solid glass beads for use in isolating cell membranes were coated with a stable, covalently attached layer of polylysine. The optimal conditions for coating the bead surface were established and the beads were tested by measuring the attachment of human erythrocyte plasma membranes. When compared to other beads, such as those with absorbed polylysine or protamine, none retained red-cell membranes as well as glass beads with covalently linked polylysine.     

Determination of intraparticle immobilized enzyme distribution in porous support by confocal scanning microscopy

Summary A method for determining the distribution of immobilized protein within a porous support has been developed. The method is based on confocal microscopy of polyacrylamide gel beads coupled to fluorescein isothiocyanate labelled enzyme. It is applied to immobilized soybean lipoxygenase. This technique allows the quantitative and qualitative analysis of protein distribution profile in intact polymer beads without splitting or cutting the carrier.     

Activity and specificity of covalently immobolized wheat germ agglutinin toward cell surfaces

Wheat germ agglutinin protein, which is able to agglutinate tumor cells better than normal cells, was covalently bound to polyacrylamide gel beads. The specific binding activity of the protein was preserved on these beads and was expressed heterogeneously by the binding of mouse leukemia cells (L1210) to the protein coupled gels. The selective activity of the immobilized protein was maximal when the number of sites available to covalently couple the protein was lowest. The application of this observation to the general field of covalent immobilization of proteins and enzymes may be of considerable utility.     

An approach for the improved immobilization of penicillin G acylase onto macroporous poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) as a potential industrial biocatalyst

The use of penicillin G acylase (PGA) covalently linked to insoluble carrier is expected to produce major advances in pharmaceutical processing industry and the enzyme stability enhancement is still a significant challenge. The objective of this study was to improve catalytic performance of the covalently immobilized PGA on a potential industrial carrier, macroporous poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) [poly(GMA‐co‐EGDMA)], by optimizing the copolymerization process and the enzyme attachment procedure. This synthetic copolymer could be a very promising alternative for the development of low‐cost, easy‐to‐prepare, and stable biocatalyst compared to expensive commercially available epoxy carriers such as Eupergit or Sepabeads. The PGA immobilized on poly(GMA‐co‐EGDMA) in the shape of microbeads obtained by suspension copolymerization appeared to have higher activity yield compared to copolymerization in a cast. Optimal conditions for the immobilization of PGA on poly(GMA‐co‐EGDMA) microbeads were 1 mg/mL of PGA in 0.75 mol/L phosphate buffer pH 6.0 at 25°C for 24 h, leading to the active biocatalyst with the specific activity of 252.7 U/g dry beads. Chemical amination of the immobilized PGA could contribute to the enhanced stability of the biocatalyst by inducing secondary interactions between the enzyme and the carrier, ensuring multipoint attachment. The best balance between the activity yield (51.5%), enzyme loading (25.6 mg/g), and stability (stabilization factor 22.2) was achieved for the partially modified PGA. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:43–53, 2016     

Lipid-coated particles--a new approach to fix membrane-bound enzymes onto carrier surfaces

A new method to covalently link phosphatidylethanolamine via the headgroup at the surface of cell-size spherical polymer particles is described. Because the density of the reactive groups linked to the polymer beads is extremely high, a dense, tightly bonded lipid monolayer is formed. When a solubilized lipid is added to the suspension of monolayer-coated polymer beads, the spontaneous formation of a bilayer-like structure is observed. The upper layer of lipid can be removed by washing with detergent solution or organic solvents, ethanol or butanol, and can be replaced in a relipidation step by any other phospholipid; thus, an asymmetric lipid bilayer structure can be formed. Membrane-bound enzymes such as alanine aminopeptidase or dipeptidyl peptidase IV may be inserted with their hydrophobic anchor segments in a stable and enzymatically active form in this artificial system. Incorporation of integral membrane enzymes such as bacteriorhodopsin with membrane-spanning domains and bulky segments at both sides of the membrane succeeded only when a hydrophilic spacer of appropriate length (e.g., pentaalanine) was introduced between the carrier surface and the lipid headgroups.     

Covalent immobilization of a flavoprotein monooxygenase via its flavin cofactor

A generic approach for flavoenzyme immobilization was developed in which the flavin cofactor is used for anchoring enzymes onto the carrier. It exploits the tight binding of flavin cofactors to their target apo proteins. The method was tested for phenylacetone monooxygenase (PAMO) which is a well-studied and industrially interesting biocatalyst. Also a fusion protein was tested: PAMO fused to phosphite dehydrogenase (PTDH-PAMO). The employed flavin cofactor derivative, N6-(6-carboxyhexyl)-FAD succinimidylester (FAD*), was covalently anchored to agarose beads and served for apo enzyme immobilization by their reconstitution into holo enzymes. The thus immobilized enzymes retained their activity and remained active after several rounds of catalysis. For both tested enzymes, the generated agarose beads contained 3 U per g of dry resin. Notably, FAD-immobilized PAMO was found to be more thermostable (40% activity after 1 h at 60 °C) when compared to PAMO in solution (no activity detected after 1 h at 60 °C). The FAD-decorated agarose material could be easily recycled allowing multiple rounds of immobilization. This method allows an efficient and selective immobilization of flavoproteins via the FAD flavin cofactor onto a recyclable carrier.     

Preparation and Characterization of Highly Porous Direct Compression Carrier Particles with Improved Drug Loading During an Interactive Mixing Process

The aim of this study was to prepare highly porous carrier particles by emulsion solvent evaporation and compare the loading capacity of these beads with two traditional carriers, sugar beads, and microcrystalline cellulose granules during an interactive mixing process. The porous carrier particles were prepared by an emulsion solvent evaporation process using cellulose propionate as a binder, anhydrous dibasic calcium phosphate, and ion exchange resins as a fillers, and polyethylene glycol as a pore inducer. Micronized furosemide or griseofulvin powder was mixed with the same volume of each carrier in an interactive mixing process. The tableting properties, drug loading per unit volume of carrier, content uniformity of the mixtures, and dissolution of the drugs from the mixtures were measured. The results showed that highly porous microcapsules with desirable hardness equivalent to that of sugar beads and MCC granules were successfully prepared. On average the loading capacity of the new carrier was 310% that of sugar beads and 320% that of MCC granules during an interactive mixing process with very good content uniformity. The tableting properties of the microcapsules were equivalent to that of microcrystalline cellulose granules, and the dissolution of the drugs from interactive mixtures prepared with the new carrier was equivalent to that of drug suspensions. This showed that the prepared microcapsule carrier could be used to improve the loading capacity during an interactive mixing and to prepare tablets by direct compression.     

Immobilization of Chloroperoxidase on Aminopropyl-Glass

Chloroperoxidase (CPO) purified from Caldariomyces fumago CMI 89362 was covalently bound to aminopropyl-glass by using a modification of an established method. Acid-washed glass was derivatized by using aminopropyltriethoxysilane, and the enzyme was ionically bound at low ionic strength. Further treatment with glutaraldehyde covalently linked the enzyme to the glass beads in an active form. No elution of bound activity from glass beads could be detected with a variety of washings. The loading of enzyme protein to the glass beads was highest, 100 mg of CPO per g of glass, at high reaction ratios of CPO to glass, but the specific activity of the immobilized enzyme was highest, 36% of theoretical, at low enzyme-to-carrier ratios. No differences in the properties of the soluble and immobilized enzymes could be detected by a number of criteria: their pH-activity and pH-stability profiles were similar, as were their thermal stabilities. After five uses, the immobilized enzyme retained full activity between pH 6.0 and 6.7.     

Macro approach and fuzzy modeling of entrapped biocatalyst

The interactions between a strain of Saccharomyces cerevisiae and an alginate matrix are investigated to ascertain the main factors affecting the bioreaction evolution. During the tests several parameters (glucose, ethanol, calcium ion and biomass concentration, pH, and alginate bed diameter) were evaluated, coupled with microscopic investigation inside the beads to determine the spatial biomass distribution. A detailed analysis of macro parameters and a correlation among them are proposed using a fuzzy algorithm. A global two-step fuzzy model results in which biomass distribution inside the beads is represented as a hidden parameter.     

The initiation of mast cell degranulation: activation at the cell membrane.

The low molecular weight mast cell activator, polymyxin B, has been covalently bound to an insoluble matrix of Sepharose 4B. It has been demonstrated that mast cells in preparations of rat peritoneal cells bind to Sepharose 4B-polymyxin B beads but not to control beads. The bound cells are stimulated to degranulate by this interaction at the cell membrane with the resultant release of biogenic amines.     

A sensitive magnetic bead method for the detection and identification of tyrosine phosphorylation in proteins by MALDI‐TOF/TOF MS

Phosphorylation is one of the most important PTMs and is estimated to occur on 30% of the mammalian proteome. Its perturbed regulation has been implicated in many pathologies. The rarity of phosphotyrosine compared with phosphoserine or phosphothreonine is prompting the development of more sensitive approaches because proteomic technologies that are currently used to assess tyrosine phosphorylation in proteins are inadequate, identifying only a fraction of the predicted tyrosine phosphoproteome. Here we describe the development of a reproducible, high‐sensitivity methodology for the detection and mapping of phosphotyrosine residues by MS. The anti‐phosphotyrosine antibody 4G10 was coupled covalently to super para‐magnetic beads or by affinity to super para‐magnetic beads with protein G covalently attached. Using this approach, we successfully enriched phosphotyrosine peptides mixed with non‐phosphorylated peptides at a ratio of up to 1:200, enabling detection at a level representing the highest sensitivity reported for tyrosine phosphorylation. The beads were subsequently used to enrich tyrosine phosphopeptides from a digest of the in vitro‐phosphorylated recombinant β‐intracellular region of the granulocyte‐macrophage colony‐stimulating factor receptor, which was subsequently analysed by MALDI‐TOF/TOF MS. Our results define this methodology as a sensitive approach for tyrosine phosphoproteome analysis.     

Novel reconstitution and enzymatic assay of the mitochondrial tricarboxylate carrier

The tricarboxylate carrier from beef liver mitochondria was reconstituted into liposomes using a protocol based on the absorption of Triton X-100 to hydrophobic Amberlite XAD-2 beads. The activity of the reconstituted carrier was determined spectroscopically by measuring the citrate/isocitrate exchange with an enzymatic assay. The Km for citrate obtained with this method was 35 microM and the Ki of 1,2,3-benzenetricarboxylate was 27 microM.     

Protein enrichment by capture-release based on strain-promoted cycloaddition of azide with bicyclononyne (BCN)

An enrichment strategy was devised for azide derivatized macromolecules, based on strain-promoted alkyne-azide cycloaddition (SPAAC) and a cleavable linker. A ring-strained alkyne, bicyclo[6.1.0]non-4-yne (BCN), was covalently attached to agarose beads via a hydrazine-sensitive linker. Benchmark studies of the resulting 'azido-trap' beads were performed with a fluorogenic coumarin derivative, leading to efficient capture of the azidocoumarin with concomitant fluorescence staining of the beads via SPAAC. The versatility of the beads for specific protein enrichment was shown by an effective and highly specific capture-release strategy for enrichment of azido-containing Candida antarctica lipase B (CalB) from a mixture of proteins. This approach is suited for selective enrichment of (glyco)proteins after metabolic incorporation of azides for subsequent (glyco)proteomics studies.