Rheological characterization of in situ cross-linkable hyaluronan hydrogels

This report investigates the rheological properties of cross-linked, thiol-functionalized HA (HA-DTPH) hydrogels prepared by varying the concentration and molecular weight (MW) of the cross-linker, poly(ethylene glycol) diacrylate (PEGDA). Hydrogels were subsequently cured for either short-term (hours) or long-term (days) and subjected to oscillatory shear rheometry (OSR). OSR allows the evaluation and comparison of the shear storage moduli (G'), an index of the total number of effective cross-links formed in the hydrogels. While the oscillatory time sweep monitored the evolution of G' during in situ gelation, the stress and frequency sweeps measured the G' of preformed and subsequently cured hydrogels. From stress sweeps, we found that, for the hydrogels, G' scaled linearly with PEGDA concentration and was independent of its MW. Upon comparison with the classical Flory's theory of elasticity, stress sweep tests on short-term cured hydrogels revealed the simultaneous, but gradual, formation of spontaneous disulfide cross-links in the hydrogels. Results from time and frequency sweeps suggested that the formation of a stable, three-dimensional network depended strictly on PEGDA concentration. Results from the equilibrium swelling of hydrogels concurred with those obtained from oscillatory stress sweeps. Such a detailed rheological characterization of our HA-DTPH-PEGDA hydrogels will aid in the design of biomaterials targeted for biomedical or pharmaceutical purposes, especially in applications involving functional tissue engineering.     

Synthesis of in situ cross-linkable macroporous biodegradable poly(propylene fumarate-co-ethylene glycol) hydrogels

This study describes a synthesis method of biodegradable macroporous hydrogels suitable as in situ cross-linkable biomaterials. Macroporous hydrogels were based on poly(propylene fumarate-co-ethylene glycol) and prepared via coupled free radical and pore formation reactions. Cross-linking was initiated by a pair of redox initiators, ammonium persulfate and L-ascorbic acid. Pores were formed by the reaction between L-ascorbic acid and sodium bicarbonate, a basic component, which evolved carbon dioxide. Sol fraction of the hydrogels was varied from 0.06 +/- 0.01 to 0.64 +/- 0.01. A stereological approach was used to analyze the morphological properties of the macroporous hydrogels by relating the morphological properties of thin sections to the original three-dimensional macroporous hydrogel. Prepared macroporous hydrogels had porosities between 0.43 +/- 0.08 and 0.84 +/- 0.02 and surface area densities between 55 +/- 3 and 108 +/- 7 cm(-1). Sodium bicarbonate concentration had the greatest effect on both the porosity and surface area density. The effect of copolymer formulation on the porosity and surface area density was insignificant. From thin sections of the macroporous hydrogels, the profile size distributions were determined as an estimate of the pore size distribution. Two formulations synthesized with varying L-ascorbic acid concentration of 0.05 and 0.1 M had median profile sizes of 50-100 and 150-200 microm, respectively. This novel synthesis method allows for the in situ cross-linking of biodegradable macroporous hydrogels with morpholological properties suitable for consideration as an injectable tissue engineering scaffold.     

Three-dimensional bioprinting in tissue engineering and regenerative medicine

With the advances of stem cell research, development of intelligent biomaterials and three-dimensional biofabrication strategies, highly mimicked tissue or organs can be engineered. Among all the biofabrication approaches, bioprinting based on inkjet printing technology has the promises to deliver and create biomimicked tissue with high throughput, digital control, and the capacity of single cell manipulation. Therefore, this enabling technology has great potential in regenerative medicine and translational applications. The most current advances in organ and tissue bioprinting based on the thermal inkjet printing technology are described in this review, including vasculature, muscle, cartilage, and bone. In addition, the benign side effect of bioprinting to the printed mammalian cells can be utilized for gene or drug delivery, which can be achieved conveniently during precise cell placement for tissue construction. With layer-by-layer assembly, three-dimensional tissues with complex structures can be printed using converted medical images. Therefore, bioprinting based on thermal inkjet is so far the most optimal solution to engineer vascular system to the thick and complex tissues. Collectively, bioprinting has great potential and broad applications in tissue engineering and regenerative medicine. The future advances of bioprinting include the integration of different printing mechanisms to engineer biphasic or triphasic tissues with optimized scaffolds and further understanding of stem cell biology.     

Viscoelastic characterization and modeling of gelation kinetics of injectable in situ cross-linkable poly(lactide-co-ethylene oxide-co-fumarate) hydrogels

Cell transplantation by injection of biodegradable hydrogels is a recently developed strategy for the treatment of degenerated tissues. A cell carrier should be cytocompatible, have suitable working time and rheological properties for injection, and harden in situ to attain dimensional stability and the desired mechanical strength. Hydrophilic macromer/cross-linker polymerizing systems, due to the relatively high molecular weight of the macromer and its inability to cross the cell membrane, are very attractive as injectable cell carriers. The objective of this research was to determine the effects of cross-linker, initiator, and accelerator concentrations on the gelation kinetics and ultimate modulus of a biodegradable, in situ cross-linkable poly(lactide-co-ethylene oxide-co-fumarate) (PLEOF) macromer. The in situ polymerizing mixture consisted of PLEOF macromer, methylene bisacrylamide cross-linker, and a neutral redox initiation system of ammonium persulfate initiator and tetramethylethylenediamine accelerator. Measurement of the time evolution of the viscoelastic properties of the network during the sol-gel transition showed the important influence of each component on the gel time and stiffness of the hydrogels. A kinetic model was developed to predict the modulus as a function of composition. Model predictions were consistent with most of the experimental findings. The values of the storage and loss moduli at the gel point were found to be approximately equal for samples with equal PLEOF concentrations, resulting in a simple method to predict the gelation time based on the Winter--Chambon criterion, with the use of the proposed kinetic model. The results of this study can be coupled with component cytocompatibility measurements to predict the effect of composition on the viability of the cells encapsulated in the hydrogel matrix.     

In situ cross-linkable novel alginate-dextran methacrylate IPN hydrogels for biomedical applications: mechanical characterization and drug delivery properties

In situ polymerizable hydrogels are extensively investigated to implement new biomedical and pharmaceutical approaches. In the present paper a novel polysaccharidic matrix based on calcium alginate (Ca(II)-Alg) hydrogel and dextran methacrylate derivative (Dex-MA), showing potential applicability in the field of pharmaceutics is described. The semi-interpenetrating polymer system (semi-IPN) obtained by a dispersion of Dex-MA chains into a Ca(II) hydrogel leads to a hydrogel with rheological properties quite different from those of Ca(II)-Alg, allowing to inject the semi-IPN easily through an hypodermic needle. The UV curing of the semi-IPN, by cross-linking of the methacrylate moieties, leads to an IPN strong hydrogel that can be used for a modulated delivery of bioactive molecules. In the present paper, rheological and mechanical behaviors of the semi-IPN and of the IPN are discussed. The release of model molecules, including a protein, are also presented to show the suitability of the novel system as a drug delivery system.     

Bio-piezoelectricity: fundamentals and applications in tissue engineering and regenerative medicine

In recent years, smart materials have piqued the interest of scientists and physicians in the biomedical community owing to their ability to modify their properties in response to an external stimulation or changes in their surroundings. Biocompatible piezoelectric materials are an interesting group of smart materials due to their ability to produce electrical charges without an external power source. Electric signals produced by piezoelectric scaffolds can renew and regenerate tissues through special pathways like that found in the extracellular matrix. This review summarizes the piezoelectric phenomenon, piezoelectric effects generated within biological tissues, piezoelectric biomaterials, and their applications in tissue engineering and their use as biosensors.     

Synthesis of chiral building blocks for organic synthesis via lipase-catalyzed reaction: New method of enhancing enzymatic reaction enantioselectivity

The optically active building blocks for organic synthesis: tertiary carbinols, antitumor lignan, liquid crystals, 1,3-diene and biscyclopropyl compounds were synthesized through lipase-catalyzed reaction. This paper discusses ways in which organic chemists can expand the applicability of lipase-catalyzed reactions for use in designing a synthetic strategy. Several excellent examples are described in which lipase-catalyzed reactions were involved as the key steps. Because lipase-catalyzed reactions often offer insufficient enantioselectivity, a new method to enhance the enantioselectivity of a lipase-catalyzed reaction was demonstrated. Thiacrown ether technology was typically used to synthesize new optically active ,-difluoro-γ-lactone.     

Polymer‐based microparticles in tissue engineering and regenerative medicine

Different types of biomaterials, processed into different shapes, have been proposed as temporary support for cells in tissue engineering (TE) strategies. The manufacturing methods used in the production of particles in drug delivery strategies have been adapted for the development of microparticles in the fields of TE and regenerative medicine (RM). Microparticles have been applied as building blocks and matrices for the delivery of soluble factors, aiming for the construction of TE scaffolds, either by fusion giving rise to porous scaffolds or as injectable systems for in situ scaffold formation, avoiding complicated surgery procedures. More recently, organ printing strategies have been developed by the fusion of hydrogel particles with encapsulated cells, aiming the production of organs in in vitro conditions. Mesoscale self‐assembly of hydrogel microblocks and the use of leachable particles in three‐dimensional (3D) layer‐by‐layer (LbL) techniques have been suggested as well in recent works. Along with innovative applications, new perspectives are open for the use of these versatile structures, and different directions can still be followed to use all the potential that such systems can bring. This review focuses on polymeric microparticle processing techniques and overviews several examples and general concepts related to the use of these systems in TE and RE applications. The use of materials in the development of microparticles from research to clinical applications is also discussed. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Synthesis and characterization of a new polysaccharide-graft-polymethacrylate copolymer for three-dimensional hybrid hydrogels

Hybrid materials constituted by hydrophobic and hydrophilic biocompatible macromolecules are useful for biomedical applications. In this context, a well-known acrylic monomer (methyl methacrylate) was polymerized and grafted onto the polysaccharide dextran by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. The effects of concentrations of dextran, acrylic monomer, and ceric ions on the copolymerization yields were investigated in detail. The obtained polymers were studied by solubility measurements, Fourier transform infrared spectrometry, (13)C nuclear magnetic resonance spectroscopy, and viscosimetric analysis. Interestingly, we found conditions to form transparent and homogeneous thin films or 3D structures with hybrid properties. Indeed, the copolymer, but not dextran or PMMA, could be dissolved in water/THF (20/80 v/v). The thermomechanical properties of the resulting copolymer analyzed by differential scanning calorimetry and dynamic mechanical analysis showed the occurrence of a single glass-transition temperature and a marked difference with the two homopolymers. The cytocompatibility of the copolymer with human endothelial cells was evidenced by the normal cell adhesion, proliferation, and morphology after 5 days in culture on these gels. In conclusion, this type of copolymer with hybrid properties of two biocompatible macromolecules could be of great interest as a 3D scaffold or for coating in biomedical applications.     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37°C, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37°C in PBS with 500 mg/dL glucose. In PBS buffer with 500 mg/dL glucose, about 10.8% of insulin was released from the hydrogel after 8 h of incubation while upon observation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Tissue specific microenvironments: a key tool for tissue engineering and regenerative medicine

The accumulated evidence points to the microenvironment as the primary mediator of cellular fate determination. Comprised of parenchymal cells, stromal cells, structural extracellular matrix proteins, and signaling molecules, the microenvironment is a complex and synergistic edifice that varies tissue to tissue. Furthermore, it has become increasingly clear that the microenvironment plays crucial roles in the establishment and progression of diseases such as cardiovascular disease, neurodegeneration, cancer, and ageing. Here we review the historical perspectives on the microenvironment, and how it has directed current explorations in tissue engineering. By thoroughly understanding the role of the microenvironment, we can begin to correctly manipulate it to prevent and cure diseases through regenerative medicine techniques.     

Hair follicular cell/organ culture in tissue engineering and regenerative medicine

Hair follicles are complex organs composed of the dermal papilla (DP), dermal sheath (DS), outer root sheath (ORS), inner root sheath (IRS) and hair shaft. Development of hair follicles begins towards the end of the first trimester of pregnancy and is controlled by epidermal–mesenchymal interaction (EMI), which is a signaling cascade between epidermal and mesenchymal cell populations. Hair grows in cycles of various phases. Specifically, anagen is the growth phase, catagen is the involuting or regressing phase and telogen is the resting or quiescent phase. Alopecia is not life threatening, but alopecia often causes severe mental stress. In addition, the number of individuals afflicted by alopecia patients has been increasing steadily. Currently there are two methods employed to treat alopecia, drug or natural substance therapy and human hair transplantation. Although drug or natural substance therapy may retard the progress of alopecia or prevent future hair loss, it may also accelerate hair loss when the medication is stopped after prolonged use. Conversely, the transplantation of human hair involves taking plugs of natural hair from areas in which occipital hair is growing and transplanting them to bald areas. However, the number of hairs that can be transplanted is limited in that only three such operations can generally be performed. To overcome such problems, many researchers have attempted to revive hair follicles by culturing hair follicle cells or mesenchymal cells in vitro and then implanting them in the treatment area.     

Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering

Novel, injectable hydrogels were developed that solidify through a physical and chemical dual-gelation mechanism upon preparation and elevation of temperature to 37 °C. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant epoxy rings and a hydrolytically degradable polyamidoamine-based diamine cross-linker were synthesized, characterized, and combined to produce in situ forming hydrogel constructs. Network formation through the epoxy-amine reaction was shown to be rapid and facile, and the progressive incorporation of the hydrophilic polyamidoamine cross-linker into the hydrogel was shown to mitigate the often problematic tendency of thermogelling materials to undergo significant postformation gel syneresis. The results suggest that this novel class of injectable hydrogels may be attractive substrates for tissue engineering applications due to the synthetic versatility of the component materials and beneficial hydrogel gelation kinetics and stability.     

Surface functionalization of nanobiomaterials for application in stem cell culture,tissue engineering,and regenerative medicine

Stem cell‐based approaches offer great application potential in tissue engineering and regenerative medicine owing to their ability of sensing the microenvironment and respond accordingly (dynamic behavior). Recently, the combination of nanobiomaterials with stem cells has paved a great way for further exploration. Nanobiomaterials with engineered surfaces could mimic the native microenvironment to which the seeded stem cells could adhere and migrate. Surface functionalized nanobiomaterial‐based scaffolds could then be used to regulate or control the cellular functions to culture stem cells and regenerate damaged tissues or organs. Therefore, controlling the interactions between nanobiomaterials and stem cells is a critical factor. However, surface functionalization or modification techniques has provided an alternative approach for tailoring the nanobiomaterials surface in accordance to the physiological surrounding of a living cells; thereby, enhancing the structural and functional properties of the engineered tissues and organs. Currently, there are a variety of methods and technologies available to modify the surface of biomaterials according to the specific cell or tissue properties to be regenerated. This review highlights the trends in surface modification techniques for nanobiomaterials and the biological relevance in stem cell‐based tissue engineering and regenerative medicine. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:554–567, 2016     

Injectable in situ forming biodegradable chitosan-hyaluronic acid based hydrogels for adipose tissue regeneration

An injectable, biodegradable and glucose-responsive hydrogel derived from natural polysaccharide derivatives was synthesized to deliver adipogenic factor of insulin in vitro for adipose tissue engineering. The biodegradable hydrogel based N-succinyl-chitosan (SCS) and aldehyde hyaluronic acid (AHA) with covalently conjugated glucose oxidase and catalase. The gelation is attributed to the Schiff-base reaction between amino and aldehyde groups of SCS and AHA, respectively. The morphologies and compressive modulus of the freeze-dried hydrogels demonstrated that the incorporated insulin and enzymes results in the formation of a tighter network structure in composite hydrogels. The immobilized enzymes triggered conversion of glucose reduces the pH value of the microenvironment, and results in hydrolysis and increasing swelling of the network basing on Schiff-base cross-linking. The pH inside the hydrogel, kept in PBS solution at pH 7.4 and 37oC, linearly dropped from 7.40 to 7.17 during 4 h of initial period, then slowly increased to 7.36 after 24 h. Correspondingly, the swelling ratio increased from 20.8 to 28.6 at 37oC in PBS with 500 mg/dL glucose. In PBS buffer with 500mg/dL glucose, about 10.8 % of insulin was seen to be released from the hydrogel after 8 h of incubation. The results demonstrated that the adipogenic factor of insulin would be released from this biodegradable hydrogel device into the local microenvironment in a controlled fashion by the swelling of hydrogel network. These preliminary studies indicate that the biodegradable and glucose-responsive hydrogel may have potential uses in adipose tissue engineering applications.     

Generation of tissue constructs for cardiovascular regenerative medicine: From cell procurement to scaffold design

The ability of the human body to naturally recover from coronary heart disease is limited because cardiac cells are terminally differentiated, have low proliferation rates, and low turn-over rates. Cardiovascular tissue engineering offers the potential for production of cardiac tissue ex vivo, but is currently limited by several challenges: (i) Tissue engineering constructs require pure populations of seed cells, (ii) Fabrication of 3-D geometrical structures with features of the same length scales that exist in native tissue is non-trivial, and (iii) Cells require stimulation from the appropriate biological, electrical and mechanical factors. In this review, we summarize the current state of microfluidic techniques for enrichment of subpopulations of cells required for cardiovascular tissue engineering, which offer unique advantages over traditional plating and FACS/MACS-based enrichment. We then summarize modern techniques for producing tissue engineering scaffolds that mimic native cardiac tissue.