Fed-batch culture of Bacillus thuringiensis for thuringiensin production in a tower type bioreactor

Fed-batch culture of Bacillus thuringiensis in a modified airlift reactor has been developed by using adaptive control of glucose concentration in the reactor. The glucose concentration was estimated via a correlation equation between carbon dioxide production rate and glucose consumption rate. The estimated glucose concentration as the output variable was fed back to computer for calculation of substrate addition. The modified reactor was an airlift reactor with a net draft tube. The airlift reactor had high oxygen transfer rate and low shear stress which were important factors for production of thuringiensin. Fed-batch culture of Bacillus thuringiensis in the modified airlift reactor provided significant improvement of thuringiensin production. (c) 1995 John Wiley & Sons, Inc.     

Characterization of a pilot plant airlift tower loop bioreactor: II. Evaluation of global mixing properties of the gas phase during yeast cultivation

Saccharomyces cerevisiae was cultivated in a 4-m(3) pilot plant airlift tower loop reactor with a draft tube in batch and continuous operations and for comparison in a laboratory airlift tower loop reactor of 0.08 m(3) volume. The reactors were characterized during and after the cultivation by measuring the distributions of the residence times of the gas phase with pseudostochastic tracer signals and mass spectrometer and by evaluating the mixing in the liquid phase with a pulse-shaped volatile tracer signal and mass spectrometer as a detector. The mean residence times and the intensities of the axial mixing in the riser and downcomer, the circulation times of the gas phase, and the fraction of the recirculated gas phase were evaluated and compared.     

Generation of small bubbles and small bubble-liquid mass transfer in airlift reactors containing highly viscous liquids

The time-dependent gas hold-up is investigated during the aeration of the Saccharomyces cerevisiae suspension, the aqueous saccharose solutions and the glycerol solutions in the external loop airlift reactor. Due to the time-dependent bubble size distribution the fraction of the small bubble hold-up in the total gas hold-up decreases with an increase of the gas flow rate and with a decrease of the viscosity. The course of the accumulation process of the small bubbles is described by the first-order kinetic equation. The small bubble accumulation rate is investigated in the airlift reactor and the bubble column. It is showed that the small bubbles form and disappear exclusively in the riser of the airlift reactor. It is found that the small bubble-liquid mass transfer coefficient is several times larger than the overall oxygen transfer coefficient.     

Pilot-plant production of prednisolone using calcium alginate immobilized Arthrobacter simplex

The maximum conversion of hydrocortisone suspensions at initial substrate concentrations greater than 4 g/L by immobilized Arthrobacter simplex in a batch reactor was 80-85%. By feeding hydrocortisone suspensions continuously to either a fed-batch-operated stirred tank reactor or to a continuous-flow airlift loop reactor, at a rate such that the soluble hydrocortisone concentration in the reactor remained ca. 0.05 g/L, 95% conversion of substratewas obtained at final product concentrations exceeding 4 g/L.     

Bacterial cellulose production by Acetobacter xylinum in a 50-L internal-loop airlift reactor

Bacterial cellulose (BC) production was realized in a batch cultivation of Acetobacter xylinum subsp. sucrofermentans BPR2001 in a 50-L internal-loop airlift reactor. When the bacterium was cultivated with air supply, 3.8 g/L of BC was produced after 67 hours. When oxygen-enriched gas was supplied, the concentration of BC was doubled and the production rate of BC was 0.116 g/L. h, which was two times higher than that of air-supplied culture and comparable to that in a mechanically agitated stirred-tank fermentor. Bacterial cellulose produced by the airlift reactor formed a unique ellipse pellet (BC pellet), different from the fibrous form which was produced in an agitated stirred-tank fermentor. The BC-pellet suspension was demonstrated to have a higher volumetric oxygen transfer coefficient than the fibrous BC suspension in a 50-L internal-loop airlift reactor. The mixing time of BC-pellet suspension in the airlift reactor was also shorter than that in water.     

Comparison of the performances of stirred tank and airlift tower loop reactors.

Following a consideration of the prerequisites for reactor comparison and the fundamental differences between stirred tank and airlift tower loop reactors, their performances are compared for the production of secondary metabolites: penicillin V by Penicillium chrysogenum, cephalosporin C by Cephalosporium acremonium, and tetracycline by Streptomyces aureofaciens. In stirred tank reactors, cell mass concentrations, volumetric productivities, and specific power inputs are higher than in airlift tower loop reactors. In the latter, efficiencies of oxygen transfer are higher, and specific productivities with regard to power input, substrate and oxygen consumptions, and yield coefficients of product formation with regard to substrate and oxygen consumptions are considerably higher than in stirred tank reactors. The prerequisites for improved performance are discussed.     

Fed-batch cultivation of recombinant escherichia coli JM103 and production of the fusion protein SPA::EcoRI in a 60-L working volume airlift tower loop reactor

SPA::EcoRI fusion protein was produced by Escherichia coli JM103 carrying the multicopy expression plasmid pMTC48, the multicopy repressor plasmid pRK248, and the multicopy protection plasmid pEcoR4 in a 60-L working volume airlift tower loop reactor on M9 minimal medium with glucose. Cell mass concentration, total cell count, number of colony-forming units, specific growth rate, yield coefficient, and metabolite (acetate, pyruvate, succinate, lactate, ethanol) concentrations were monitored during the growth phase and gene expression. Gene expression was induced by temperature shift or chemically by isopropyl-thiogalactosidase in the airlift tower loop reactor (ALTR) at constant cultivation time and in a small stirred tank reactor at different cultivation times. During induction, the cultivation medium was supplemented with concentrated Luria-Bertani (LB) medium. The intracellular enzyme activity was evaluated as a function of the time after the start of the induction. It was found that the reduction of the glucose concentration and increase of the dissolved oxygen concentration reduced the acetate produced and increased the intracellular enzyme activity. (c) 1993 John Wiley & Sons, Inc.     

Region-dependent oxygen transfer rate in the rectangular airlift reactor

Gas hold-up and the oxygen transfer in the zones of the internal loop airlift reactor with rectangular cross-section was studied. It was found, that the downcomer to the riser gas hold-up ratio depends on the gas flow rate, the physicochemical properties of the system and on the reactor height. The ratio of the downcomer mass transfer coefficient to the global mass transfer coefficient was less than 6%. The ratio of the downcomer to the global mass transfer coefficient slightly increased with increase of the gas flow rate and decreased with increase of the liquid viscosity. The proposed correlation for the global overall mass transfer coefficient predicts the experimental data well within 16.6% deviation. It was confirmed that the reactor height is the important parameter for a design and a scale-up of the airlift reactors.     

Cultivation of recombinant E. coli and production of fusion protein in 60-1 bubble column and airlift tower loop reactors.

E. coli K12 with multicopy plasmid (lambda PR-promoter and temperature-sensitive lambda cI 857 repressor) was cultivated in 60-l bubble column and airlift tower loop reactors. The medium composition, cell concentration, and intracellulary enzyme activity were monitored on-line during batch, fed-batch, and continuous cultivations. The specific growth rates, cell mass yield coefficients, plasmid stabilities, productivities of the amount of active fusion protein (beta-galactosidase activity), concentrations and yields of acetic acid, and volumetric oxygen transfer coefficient were evaluated for different medium compositions and cultivation conditions. The enzyme activity was also monitored during the temperature induction. The results evaluated in the 60-l bubble column and airlift tower loop reactors are compared with those evaluated in a 1-1 stirred-tank reactor.     

A novel rectangular airlift reactor with mesh baffle-plates

An experimental rectangular airlift reactor having mesh baffle-plates has been fabricated out of Perspex and compared with conventional airlift and bubble column in terms of gas holdup, volumetric mass transfer coefficient and mixing time. Mesh baffle-plates improved mass transfer and mixing with the mass transfer coefficient of the proposed reactor being up to 12% higher than that in a conventional airlift reactor under the same operating condition. The mixing time of the proposed reactor can be 95% lower than that of the airlift reactor.     

Influence of total and oxygen partial pressure on growth and metabolism of Methylomonas clara

The effect of total and oxygen partial pressure on metabolic activities of Methylomonas clara has been investigated in batch and continuous cultivation experiments using a pressurizable airlift loop reactor. At Oxygen partial pressures of more than 1000 mbar growth of M. Clara is retarded and completely inhibited at 1200 mbr. However, after several hours of incubation at elevated oxygen partial pressures, biomass formation is nearly doubled in subsquent continuous operation, Cells pretreated with oxygen are characterized by a change of cytochrome content; they excret carboxylic acids into the medium. The results indicate that, by sparging an aerobic culture intermittently wich pure oxygen, formation of biomass might be enbanced. (c) 1992 John Wiley & Sons, Inc.     

Improvement of Panax notoginseng cell culture for production of ginseng saponin and polysaccharide by high density cultivation in pneumatically agitated bioreactors

A Panax notoginseng cell culture was successfully scaled up from shake flask to 1.0-L bubble column reactor and concentric-tube airlift reactor. High-density bioreactor batch cultivation was carried out using a modified MS medium. The maximum cell density in batch cultures reached 20.1, 21.0 and 24.1 g/L in the shake flask, bubble column and airlift reactors, respectively, and their corresponding biomass productivity was 950, 1140 and 1350 mg/(L x d) for each. The productivity of ginseng saponin was 70, 96 and 99 mg/(L x d) in the flask, bubble column and airlift reactors, respectively; and the polysaccharide productivity reached 104, 119 and 151 mg/(L x d) for each. Furthermore, a fed-batch cultivation strategy was developed on the basis of specific oxygen uptake rate (SOUR), i.e., sucrose feeding before a sharp decrease of SOUR, and the highest cell density of 29.7 g/L was successfully achieved in the airlift bioreactor on day 17 with a very high biomass productivity of 1520 mg/(L x d). The concentrations of ginseng saponin and polysaccharide reached about 2.1 and 3.0 g/L, respectively, and their productivity was 106 (saponin) and 158 mg/(L x d) (polysaccharide). This work successfully demonstrated the high-density bioreactor cultivation of P. notoginseng cells in pneumatically agitated bioreactors and the reproduction of the shake flask culture results in bioreactors. The cell density, biomass productivity, production titer and productivity of both ginseng saponin and polysaccharide obtained here were the highest that have been reported on a reactor scale for all the ginseng species.     

Production of thuringiensin from Bacillus thuringiensis using a net-draft-tube,modified airlift reactor

A net-draft-tube, modified airlift reactor and a stirred-tank reactor were used for thuringiensin production by Bacillus thuringiensis subsp. darmstadiensis growing with various concentrations of molasses. The optimum concentration of molasses for thuringiensin production in both reactors was 15 g/l. There was a 6 h delay in sporulation in the modified airlift reactor compared with that in the stirred-tank reactor. Thuringiensin yield in the modified airlift reactor (2.2 g/l) was consequently higher than that in the stirred-tank reactor (1.1 g/l).     

A simple and low-cost airlift photobioreactor for microalgal mass culture

A simple, low-cost, and efficient airlift photobioreactor for microalgal mass culture was designed and developed. The reactor was made of Plexiglas, and composed of three major parts: outer tube, draft tube and air duct. The fluid-dynamic characteristics of the airlift reactor were studied. The system proved to be well suited to the mass cultivation of a marine microalga, Chlorella sp. In batch culture, the biomass volumetric output rate of 0.21 g l^–1 d^–1 was obtained at the superficial gas velocity of 4 mm s^–1 in the draft tube.     

Process optimization of a continuous airlift tower-loop reactor

Based on the experimental investigations with H. polymorpha and Methylomonas M 15 in bench-scale airlift tower-loop reactors, a general distributed parameter model was developed and used to simulate to cultivation process in a 40-m-high production reactor. This general model was simplified with regard to the gas phase and loop balances and was employed to optimize cell productivity and/or profit in a 20-m-high pilot-plant airlift tower-loop reactor. Maximum cell productivity always occurs in the oxygen-transfer-limited growth range. In case of a high "penalty factor" for nonconsumed substrate, maximum profit is attained at the boundary between substrate and oxygen-transfer-limited growth. Oxygen-transfer limitation exists in the lower half of the tower, whereas in the upper half, substrate limitation prevails. The longitudinal dissolved oxygen concentration passes a minimum in this case as has been determined experimentally in the bench-scale column. The simulation results agree fairly well with the data measured in the pilot plant.     

Investigations of cephalosporin C production in an airlift tower loop reactor

Summary Cephalosporin C was produced by Cephalosporium acremonium in a 60 l airlift loop reactor on complex medium (with 30 kg/m³ peanut flour) in fed-batch operation. A final product concentration of 5 kg/m³ and a maximum productivity of 45 g/m³ h were attained. On-line analysis was used to determine ammonia, methionine, phosphate, reducing sugar and cephalosporin C by an autoanalyser, glucose by a flow injection analyser and cephalosporin C, penicillin N, deacetoxycephalosporin C, deacetylce-phalosporin C and methionine by HPLC. The volumetric productivity of the stirred tank reactor was higher than that of the airlift reactor because of differences in cell concentration. Specific productivities in relative to cell mass were similar in the two reactors. The substrate yield coefficient in the airlift reactor was twice that in the stirred tank reactor.Nomenclature E _o2 efficiency of oxygen transfer with regard to the specific power input - K _La volumetric mass transfer coefficient - OTR oxygen transfer rate - P power input - PR volumetric productivity of CPC - q _a volumetric aeration rate/broth volume (vvm) - SPR specific productivity with regard to RNA - V _L broth volume in reactor - z relative height of the aerated reactor     

An airlift loop reactor for the transformation of steroids by immobilized cells

Summary The flow behaviour of calcium alginate beads in an airlift reactor (ALR) with external loop was dependent on the airflow rate into and the amount of beads in the reactor. The performance of immobilizedArthrobacter simplex for the ¹-dehydrogenation of hydrocortisone in the ALR compared favourably to that in a stirred tank reactor. The physical stability of the calcium alginate beads was significantly greater in the ALR.     

Jet aeration as alternative to overcome mass transfer limitation of stirred bioreactors

In industrial biotechnology increasing reactor volumes have the potential to reduce production costs. Whenever the achievable space time yield is determined by the mass transfer performance of the reactor, energy efficiency plays an important role to meet the requirements regarding low investment and operating costs. Based on theoretical calculations, compared to bubble column, airlift reactor, and aerated stirred tank, the jet loop reactor shows the potential for an enhanced energetic efficiency at high mass transfer rates. Interestingly, its technical application in standard biotechnological production processes has not yet been realized. Compared to a stirred tank reactor powered by Rushton turbines, maximum oxygen transfer rates about 200% higher were achieved in a jet loop reactor at identical power input in a fed batch fermentation process. Moreover, a model‐based analysis of yield coefficients and growth kinetics showed that E. coli can be cultivated in jet loop reactors without significant differences in biomass growth. Based on an aerobic fermentation process, the assessment of energetic oxygen transfer efficiency [kgO₂ kW^?1 h^?1] for a jet loop reactor yielded an improvement of almost 100%. The jet loop reactor could be operated at mass transfer rates 67% higher compared to a stirred tank. Thus, an increase of 40% in maximum space time yield [kg m^?3 h^?1] could be observed.     

Effect of scale-up on average shear rates for aerated non-Newtonian liquids in external loop airlift reactors

Average shear rates have been estimated experimentally in a 700-dm3 external loop airlift reactor. Aqueous pseudoplastic carboxymethylcellulose and xanthan gum solutions were used to simulate non-Newtonian behavior of biological media. Average shear rates of non-Newtonian solutions were found by analogy with Newtonian glycerol solutions using downcomer liquid velocity as the measurable parameter. Due to the complexity of local shear rate measurement, an average shear rate was assumed to exist and is proportional to superficial gas velocity. The data from this work and those in the literature were used in producing a new correlation for estimating average shear rates as a function of superficial gas velocity, geometry, and dispersion height. Wall shear rates were found to be significant. The ratio of wall shear rates to bulk shear rates were varied from 5% to 40%. Furthermore, it has been found that shear rates generated in airlift loop reactors are lower than those generated in bubble columns. Copyright 1999 John Wiley & Sons, Inc.