Impact of movement tempo on bar velocity and time under tension in resistance exercises with different external loads

The goal of the study was to determine the differences between volitional and maximal movement tempo during resistance exercise. Ten healthy men volunteered for the study (age = 26.4 ± 4.8 years; body mass = 93.8 ± 9.6 kg; barbell squat one-repetition maximum (1RM) = 175 ± 16.7 kg; bench press 1RM = 140.5 ± 26.8 kg). In a randomized order, the participants performed six sets of the barbell squat and the bench press exercise at progressive loads from 40% to 90%1RM (step by 10%) under two testing conditions: with volitional movement tempo or with maximal movement tempo. The three-way repeated measures ANOVA showed a statistically significant multi-interaction effect for time under tension (p < 0.001), peak bar velocity (p = 0.04) and for mean bar velocity (p < 0.001). There was also a statistically significant main effect of movement tempo for time under tension (p < 0.001), peak bar velocity (p < 0.001) and for mean bar velocity (p < 0.001). The post hoc analysis for main effect of tempo revealed that time under tension was significantly longer for volitional compared to maximal tempo (0.84 vs 0.67 s, respectively), peak bar velocity was significantly higher for maximal compared to volitional tempo (1.24 m/s vs 0.90 m/s, respectively), and mean bar velocity was significant higher for maximal compared to volitional tempo (0.84 m/s vs 0.67 m/s, respectively). The presented results indicate that there were significant differences between volitional and maximal movement tempos in time under tension and bar velocity (peak and mean), as well as significant differences in those variables between the two exercises. Therefore, the velocity of movement and time under tension is related to movement tempo, external load and type of exercise used.     

The validity and reliability of the 1RM bench press using chain-loaded resistance

The purposes of this study were to determine the validity and test-retest reliability of the 1 repetition maximum (1RM) chain-loaded, free-weight bench press (CBP) and to examine possible learning effects that may occur between the test-retest measurements. Nine resistance-trained men (20.58 +/- 1.31 years, 188.24 +/- 9.29 cm, 92.07 +/- 16.94 kg) and seven resistance-trained women (20.42 +/- 0.98 years, 175.61 +/- 9.32 cm, 73.61 +/- 10.80 kg) participating in Division II college basketball completed this study. Two familiarization sessions took place using light to moderate loads to learn proper technique. The subjects completed a 1RM test on the traditional plate-loaded bench press 4 days before completion of the CBP 1RM, which was followed by 4 days of rest before completing the retest. Intraclass correlation coefficients (ICC) and the percent coefficients of variation (CV) were used to determine relative and absolute test-retest reliability. Concurrent validity was determined from the Pearson correlation coefficients between the CBP and the plate-loaded bench press. Test-retest differences were analyzed with the paired t-test. ICC and CV for the men (r = 0.99, 1.4%) and women (r = 0.93, 3.5%), respectively indicate that highly reproducible 1RM scores can be found with the CBP. High validity was also found with high correlations between the CBP and plate-loaded bench press for the men (r = 0.95) and women (r = 0.80). A statistically significant (p = 0.04) but clinically small (2.57 kg) shift in the mean occurred between the CBP test and retest for the men, whereas no change occurred for the women. The data indicate that valid and reliable 1RM scores can be found after two familiarization sessions in men and women athletes who have previous resistance training experience.     

Effect of rest interval length on repeated 1 repetition maximum back squats

To examine the effects of different rest intervals on the repeatability of 1 repetition maximum (1RM) efforts in the free-weight back squat exercise, 17 weight-trained men served as subjects (mean age 22.0 years). One repetition maximum was tested on each of the first 2 days of testing to establish a stable baseline (1RM = 184.9 kg). Each of the next 3 sessions involved performing 2 1RM back squats, with the rest interval between attempted lifts being either 1, 3, or 5 minutes, assigned in a counterbalanced fashion. For the 1-minute rest interval, 13 of 17 subjects successfully completed the second lift; for the 3-minute rest interval, 16 of 17 were successful; and for the 5-minute rest interval, 15 of 17 were successful. Cochran Q analysis determined no significant difference (p > 0.05) in the ability to repeat a successful maximal-effort back squat when different rest intervals were used. These findings are consistent with the literature for the bench-press exercise and indicate that 1-minute rest intervals are sufficient for recovery between attempted lifts during 1RM testing or training for the free-weight back squat when involving lifters of this caliber.     

Effects of fatigue on bilateral ground reaction force asymmetries during the squat exercise

Physical performance and injury risk have been related to functional asymmetries of the lower extremity. The effect of fatigue on asymmetries is not well understood. The goal of this investigation was to examine asymmetries during fatiguing repetitions and sets of the free-weight barbell back squat exercise. Seventeen healthy recreationally trained men and women (age = 22.3 ± 2.5 years; body mass = 73.4 ± 13.8 kg; squat 8 repetition maximum [8RM] = 113 ± 35% body mass [mean ± SD]) performed 5 sets of 8 repetitions with 90% 8RM while recording bilateral vertical ground reaction force (GRFv). The GRFv asymmetry during the first 2 (R1 and R2) and the last 2 (R7 and R8) repetitions of each set was calculated by subtracting the % load on the right foot from that of the left foot. Most subjects placed more load on their left foot (also their preferred non-kicking foot). Average absolute asymmetry level across all sets was 4.3 ± 2.5 and 3.6 ± 2.3% for R1 and R2 and R7 and R8, respectively. There were no effects of fatigue on GRFv asymmetries in whole-group analysis (n = 17). However, when initially highly symmetric subjects (±1.7% Left-Right) were removed, average absolute GRFv asymmetry dropped from the beginning to the end of a set (n = 12, p = 0.044) as did peak instantaneous GRFv asymmetry when exploring general shifts toward the left or right leg (n = 12, p = 0.042). The GRFv asymmetries were highly repeatable for 8 subjects that repeated the protocol (Cronbach's α ≥ 0.733, p ≤ 0.056). These results suggest that functional asymmetries, though low, are present in healthy people during the squat exercise and remain consistent. Asymmetries do not increase with fatigue, potentially even decreasing, suggesting that healthy subjects load limbs similarly as fatigue increases, exposing each to similar training stimuli.     

The effects of rest interval length on acute bench press performance: the influence of gender and muscle strength

The purpose of this study was to investigate the effects of rest interval (RI) length on bench press performance in subjects with disparity in maximum strength. Two cohorts of subjects performed 3 bench press protocols in random order consisting of 3 sets of up to 10 repetitions with 75% of 1-repetition maximum (1RM) using either 1-, 2-, or 3-minute RIs between sets. In the first cohort, 22 men and women were studied to investigate gender influence. In the second cohort, 23 men were tested for 1RM bench press strength and placed into a low 1RM (mean = 80.7 ± 7.5 kg) or high 1RM (mean = 140.6 ± 11.9 kg) experimental group. The number of successful repetitions completed, average power, and velocity for each set were recorded. Women performed significantly more repetitions than men with 1-minute (26.9 ± 4.4 vs. 21.1 ± 3.5), 2-minute (29.0 ± 2.0 vs. 24.0 ± 4.5), and 3-minute (29.7 ± 1.8 vs. 25.8 ± 5.1) RIs. The magnitude of decline in average velocity and power was significantly higher in men than in women. Total number of repetitions performed was significantly greater in the low 1RM group than in the high 1RM group at 1-minute (21.6 ± 5.0 vs. 18.1 ± 2.0) and 2-minute RIs (24.2 ± 5.4 vs. 21.3 ± 2.8). Significant negative correlations were observed between 1RM bench press and total number of repetitions completed for 1- and 2-minute RIs (r = -0.558 and -0.490, respectively). These data indicate that maximal strength plays a role in bench press performance with varying RIs and suggest that shorter RIs may suffice in women to attain a specific volume.     

A comprehensive analysis of the velocity-based method in the shoulder press exercise: stability of the load-velocity relationship and sticking region parameters

The purpose of this study was threefold: i) to analyse the load-velocity relationship of the shoulder press (SP) exercise, ii) to investigate the stability (intra-individual variability) of this load-velocity relationship for athletes with different relative strength levels, and after a 10-week velocity-based resistance training (VBT), and iii) to describe the velocity-time pattern of the SP: first peak velocity [V_max1], minimum velocity [V_min], and second peak velocity [V_max2]. This study involves a cross-sectional (T1, n = 48 subjects with low, medium and high strength levels) and longitudinal (T2, n = 24 subjects randomly selected from T1 sample) design. In T1, subjects completed a progressive loading test up to the 1RM in the SP exercise. The barbell mean, peak and mean propulsive velocities (MV, PV and MPV) were monitored. In T2, subjects repeated the loading test after 10 weeks of VBT. There were very close relationships between the %1RM and velocity attained in the three velocity outcomes (T1, R²: MV = 0.970; MPV = 0.969; PV = 0.954), being even stronger at the individual level (T1, R² = 0.973–0.997). The MPV attained at the 1RM (~0.19 m·s^-1) was consistent among different strength levels. Despite the fact that 1RM increased ~17.5% after the VBT programme, average MPV along the load-velocity relationship remained unaltered between T1 and T2 (0.69 ± 0.06 vs. 0.70 ± 0.06 m·s^-1). Lastly, the three key parameters of the velocity-time curve were detected from loads > 74.9% 1RM at 14.3% (V_max1), 46.1% (V_min), and 88.7% (V_max2) of the concentric phase. These results may serve as a practical guideline to effectively implement the velocity-based method in the SP exercise.     

Front squat data reproducibility collected with a triple-axis accelerometer

The purpose of our study was to assess data reproducibility from 2 consecutive front squat workouts, spaced 1 week apart, performed by American college football players (n = 18) as they prepared for their competitive season. For each workout, our methods entailed the performance of 3-6 front squat repetitions per set at 55, 65, and 75% of subject's 1 repetition maximum (1RM) load. In addition, a fourth set was done at a heavier load, with a resistance equal to 80 and 83% of their 1RM values, for the first and second workouts, respectively. A triple-axis accelerometer was affixed to a barbell to quantify exercise performance. Per load, the accelerometer measures peak values for the following indices: force, velocity, and power. To assess data reproducibility, inter-workout comparisons were made for 12 performance indices with 4 statistical test-retest measures: intraclass correlation coefficients, coefficients of variation (CVs), and the SEM expressed in both absolute and relative terms. Current results show that the majority of performance indices exceeded intraclass correlation (0.75-0.80) and CV (10-15%) values previously deemed as acceptable levels of data reproducibility. The 2 indices with the greatest variability were power and velocity values obtained at 55% of the 1RM load; thus, it was concluded that higher movement rates at the lightest load were the most difficult aspect of front squat performance to repeat successfully over time. Our practical applications imply lighter loads, with inherently higher rates of barbell movement, yield lower data reproducibility values.     

No difference in 1RM strength and muscle activation during the barbell chest press on a stable and unstable surface

Exercise or Swiss balls are increasingly being used with conventional resistance exercises. There is little evidence supporting the efficacy of this approach compared to traditional resistance training on a stable surface. Previous studies have shown that force output may be reduced with no change in muscle electromyography (EMG) activity while others have shown increased muscle EMG activity when performing resistance exercises on an unstable surface. This study compared 1RM strength, and upper body and trunk muscle EMG activity during the barbell chest press exercise on a stable (flat bench) and unstable surface (exercise ball). After familiarization, 13 subjects underwent testing for 1RM strength for the barbell chest press on both a stable bench and an exercise ball, each separated by at least 7 days. Surface EMG was recorded for 5 upper body muscles and one trunk muscle from which average root mean square of the muscle activity was calculated for the whole 1RM lift and the concentric and eccentric phases. Elbow angle during each lift was recorded to examine any range-of-motion differences between the two surfaces. The results show that there was no difference in 1RM strength or muscle EMG activity for the stable and unstable surfaces. In addition, there was no difference in elbow range-of-motion between the two surfaces. Taken together, these results indicate that there is no reduction in 1RM strength or any differences in muscle EMG activity for the barbell chest press exercise on an unstable exercise ball when compared to a stable flat surface. Moreover, these results do not support the notion that resistance exercises performed on an exercise ball are more efficacious than traditional stable exercises.     

Kinematic and kinetic analysis of maximal velocity deadlifts performed with and without the inclusion of chain resistance

The purpose of this study was to investigate whether the deadlift could be effectively incorporated with explosive resistance training (ERT) and to investigate whether the inclusion of chains enhanced the suitability of the deadlift for ERT. Twenty-three resistance trained athletes performed the deadlift with 30, 50, and 70% 1-repetition maximum (1RM) loads at submaximal velocity, maximal velocity (MAX), and MAX with the inclusion of 2 chain loads equal to 20 or 40% of the subjects' 1RM. All trials were performed on force platforms with markers attached to the barbell to calculate velocity and acceleration using a motion capture system. Significant increases in force, velocity, power, rate of force development, and length of the acceleration phase (p < 0.05) were obtained when repetition velocity increased from submaximal to maximal. During MAX repetitions with a constant resistance, the mean length of the acceleration phase ranged from 73.2 (±7.2%) to 84.9 (±12.2%) of the overall movement. Compared to using a constant resistance, the inclusion of chains enabled greater force to be maintained to the end of the concentric action and significantly increased peak force and impulse (p < 0.05), while concurrently decreasing velocity, power, and rate of force development (p < 0.05). The effects of chains were influenced by the magnitude of the chain and barbell resistance, with greater increases and decreases in mechanical variables obtained when heavier chain and barbell loads were used. The results of the investigation suggest that the deadlift can be incorporated effectively in ERT programs. Coaches and athletes should be aware that the inclusion of heavy chains may have both positive and negative effects on kinematics and kinetics of an exercise.     

A biomechanical analysis of straight and hexagonal barbell deadlifts using submaximal loads

The purpose of the investigation was to compare the kinematics and kinetics of the deadlift performed with 2 distinct barbells across a range of submaximal loads. Nineteen male powerlifters performed the deadlift with a conventional straight barbell and a hexagonal barbell that allowed the lifter to stand within its frame. Subjects performed trials at maximum speed with loads of 10, 20, 30, 40, 50, 60, 70, and 80% of their predetermined 1-repetition maximum (1RM). Inverse dynamics and spatial tracking of the external resistance were used to quantify kinematic and kinetic variables. Subjects were able to lift a heavier 1RM load in the hexagonal barbell deadlift (HBD) than the straight barbell deadlift (SBD) (265 ± 41 kg vs. 245 ± 39 kg, p < 0.05). The design of the hexagonal barbell significantly altered the resistance moment at the joints analyzed (p < 0.05), resulting in lower peak moments at the lumbar spine, hip, and ankle (p < 0.05) and an increased peak moment at the knee (p < 0.05). Maximum peak power values of 4,388 ± 713 and 4,872 ± 636 W were obtained for the SBD and HBD, respectively (p < 0.05). Across the submaximal loads, significantly greater peak force, peak velocity and peak power values were produced during the HBD compared to during the SBD (p < 0.05). The results demonstrate that the choice of barbell used to perform the deadlift has a significant effect on a range of kinematic and kinetic variables. The enhanced mechanical stimulus obtained with the hexagonal barbell suggests that in general the HBD is a more effective exercise than the SBD.     

Smith machine counterbalance system affects measures of maximal bench press throw performance

Equipment with counterbalance weight systems is commonly used for the assessment of performance in explosive resistance exercise movements, but it is not known if such systems affect performance measures. The purpose of this study was to determine the effect of using a counterbalance weight system on measures of smith machine bench press throw performance. Ten men and 14 women (mean ± SD: age, 25 ± 4 years; height, 173 ± 10 cm; weight, 77.7 ± 18.3 kg) completed maximal smith machine bench press throws under 4 different conditions (2 × 2; counterbalance × load): with or without a counterbalance weight system and using 'light' or 'moderate' net barbell loads. Performance variables (peak force, peak velocity, and peak power) were measured using a linear accelerometer attached to the barbell. The counterbalance weight system resulted in significant (p < 0.001) reductions in measures of peak force (mean difference ± standard error: light: -112 ± 20 N; moderate: -140 ± 23 N), peak velocity (light: -0.49 ± 0.10 m·s; moderate: -0.33 ± 0.07 m·s), and peak power (light: -220 ± 43 W; moderate: -143 ± 28 W) compared with no counterbalance system for both load conditions. Load condition did not affect absolute or percentage reductions from the counterbalance weight system for any variable. In conclusion, the use of a counterbalance weight system reduces accelerometer-based performance measures for the bench press throw exercise at light and moderate loads. This reduction in measures is likely because of an increase in the external resistance during the movement, which results in a discrepancy between the manually input and the actual value for external load. A counterbalance weight system should not be used when measuring performance in explosive resistance exercises with an accelerometer.     

Monitoring exercise intensity during resistance training using the session RPE scale

This study investigated the reliability of the session rating of perceived exertion (RPE) scale to quantify exercise intensity during high-intensity (H), moderate-intensity (M), and low-intensity (L) resistance training. Nine men (24.7 +/- 3.8 years) and 10 women (22.1 +/- 2.6 years) performed each intensity twice. Each protocol consisted of 5 exercises: back squat, bench press, overhead press, biceps curl, and triceps pushdown. The H consisted of 1 set of 4-5 repetitions at 90% of the subject's 1 repetition maximum (1RM). The M consisted of 1 set of 10 repetitions at 70% 1RM, and the L consisted of 1 set of 15 repetitions at 50% 1RM. RPE was measured following the completion of each set and 30 minutes postexercise (session RPE). Session RPE was higher for the H than M and L exercise bouts (p < or = 0.05). Performing fewer repetitions at a higher intensity was perceived to be more difficult than performing more repetitions at a lower intensity. The intraclass correlation coefficient for the session RPE was 0.88. The session RPE is a reliable method to quantify various intensities of resistance training.     

Muscular outputs during dynamic bench press under stable versus unstable conditions

Previous studies have suggested that resistance training exercise under unstable conditions decreases the isometric force output, yet little is known about its influence on muscular outputs during dynamic movement. The objective of this study was to investigate the effect of an unstable condition on power, force, and velocity outputs during the bench press. Twenty male collegiate athletes (mean age, 21.3 +/- 1.5 years; mean height, 167.7 +/- 7.7 cm; mean weight, 75.9 +/- 17.5 kg) participated in this study. Each subject attempted 3 sets of single bench presses with 50% of 1 repetition maximum (1RM) under a stable condition with a flat bench and an unstable condition with a Swiss ball. Acceleration data were obtained with an accelerometer attached to the center of a barbell shaft, and peak outputs of power, force, and velocity were computed. Although significant loss of the peak outputs was found under the unstable condition (p < 0.017), their reduction rates remained relatively low, approximately 6% for force and 10% for power and velocity outputs, compared with previous findings. Such small reduction rates of muscular outputs may not compromise the training effect. Prospective studies are necessary to confirm whether the resistance training under an unstable condition permits the improvement of dynamic performance and trunk stability.     

Prediction of one repetition maximum strength from multiple repetition maximum testing and anthropometry

The purpose of this study was to quantify the decrease in the load lifted from 1 to 5, 10, and 20 repetitions to failure for the flat barbell bench press (chest press; CP) and plate-loaded leg press (LP). Furthermore, we developed prediction equations for 1 repetition maximum (RM) strength from the multiple RM tests, including anthropometric data, gender, age, and resistance training volume. Seventy subjects (34 men, 36 women), 18-69 years of age, completed 1, 5, 10, and 20RM testing for each of the CPs and LPs. Regression analyses of mean data revealed a nonlinear decrease in load with increasing repetition number (CP: linear S(y.x) = 2.6 kg, nonlinear S(y.x) = 0.2 kg; LP: linear S(y.x) = 11.0 kg, nonlinear S(y.x) = 2.6 kg, respectively). Multiple regression analyses revealed that the 5RM data produced the greatest prediction accuracy, with R(2) data for 5, 10, and 20RM conditions being LP: 0.974, 0.933, 0.915; CP: 0.993, 0.976, and 0.955, respectively. The regression prediction equations for 1RM strength from 5RM data were LP: 1RM = 1.0970 x (5RM weight [kg]) + 14.2546, S(y.x) = 16.16 kg, R(2) = 0.974; CP: 1RM = 1.1307 x (5RM weight) + 0.6999, S(y.x) = 2.98 kg, R(2) = 0.993. Dynamic muscular strength (1RM) can be accurately estimated from multiple repetition testing. Data reveal that no more than 10 repetitions should be used in linear equations to estimate 1RM for the LP and CP actions.     

Acute effects of elastic bands during the free-weight barbell back squat exercise on velocity, power, and force production

The use of elastic bands in resistance training has been reported to be effective in increasing performance-related parameters such as power, rate of force development (RFD), and velocity. The purpose of this study was to assess the following measures during the free-weight back squat exercise with and without elastic bands: peak and mean velocity in the eccentric and concentric phases (PV-E, PV-C, MV-E, MV-C), peak force (PF), peak power in the concentric phase, and RFD immediately before and after the zero-velocity point and in the concentric phase (RFDC). Twenty trained male volunteers (age = 26.0 ± 4.4 years) performed 3 sets of 3 repetitions of squats (at 55% one repetition maximum [1RM]) on 2 separate days: 1 day without bands and the other with bands in a randomized order. The added band force equaled 20% of the subjects' 55% 1RM. Two independent force platforms collected ground reaction force data, and a 9-camera motion capture system was used for displacement measurements. The results showed that PV-E and RFDC were significantly (p < 0.05) greater with the use of bands, whereas PV-C and MV-C were greater without bands. There were no differences in any other variables. These results indicate that there may be benefits to performing squats with elastic bands in terms of RFD. Practitioners concerned with improving RFD may want to consider incorporating this easily implemented training variation.     

A comparison of periodization models during nine weeks with equated volume and intensity for strength

The purpose of the present investigation was to determine if significant differences exist among 3 different periodization programs in eliciting changes in strength. Twenty-eight recreationally trained college-aged volunteers (mean +/- SD; 22.29 +/- 3.98) of both genders were tested for bench press, leg press, body fat percentage, chest circumference, and thigh circumference during initial testing. After initial testing, subjects were randomly assigned to 1 of 3 training groups: (a) linear periodization (n = 9), (b) daily undulating periodization (n = 10), or (c) weekly undulating periodization (n = 9). The training regimen for each group consisted of a 9-week, 3-day-per-week program. Training loads were assigned as heavy (90%, 4 repetition maximum [4RM]), medium (85%, 6RM), or light (80%, 8RM) for bench press and leg press exercises. Subjects were familiarized with the CR-10 rated perceived exertion scale and instructed to achieve an 8 or 9 on the final repetition of each set for all other exercises. Subjects were then retested after 4 weeks of training. Training loads were then adjusted according to the new 1RM. Subjects were then retested after 5 more weeks of exercise. For all subjects, significant (p < 0.05) increases in bench press and leg press strength were demonstrated at all time points (T1-T3). No significant differences (p > 0.05) were observed between groups for bench press, leg press, body fat percentage, chest circumference, or thigh circumference at all time points. These results indicate that no separation based on periodization model is seen in early-phase training.     

Effects of resistance training on the physical capacities of adolescent soccer players

This study examined the effects of a progressive resistance training program in addition to soccer training on the physical capacities of male adolescents. Eighteen soccer players (age: 12-15 years) were separated in a soccer (SOC; n = 9) and a strength-soccer (STR; n = 9) training group and 8 subjects of similar age constituted a control group. All players followed a soccer training program 5 times a week for the development of technical and tactical skills. In addition, the STR group followed a strength training program twice a week for 16 weeks. The program included 10 exercises, and at each exercise, 2-3 sets of 8-15 repetitions with a load 55-80% of 1 repetition maximum (1RM). Maximum strength ([1RM] leg press, bench-press), jumping ability (squat jump [SJ], countermovement jump [CMJ], repeated jumps for 30 seconds) running speed (30 m, 10 x 5-m shuttle run), flexibility (seat and reach), and soccer technique were measured at the beginning, after 8 weeks, and at the end of the training period. After 16 weeks of training, 1RM leg press, 10 x 5-m shuttle run speed, and performance in soccer technique were higher (p < 0.05) for the STR and the SOC groups than for the control group. One repetition maximum bench press and leg press, SJ and CMJ height, and 30-m speed were higher (p < 0.05) for the STR group compared with SOC and control groups. The above data show that soccer training alone improves more than normal growth maximum strength of the lower limps and agility. The addition of resistance training, however, improves more maximal strength of the upper and the lower body, vertical jump height, and 30-m speed. Thus, the combination of soccer and resistance training could be used for an overall development of the physical capacities of young boys.     

Ratings of perceived exertion in active muscle during high-intensity and low-intensity resistance exercise

This investigation compared ratings of perceived exertion specific to the active muscles used during resistance exercise (RPE-AM) using the 15-category Borg scale during high-intensity (HIP) and low-intensity (LIP) weight lifting. Ten men (23.2 +/- 3.6 years) and 10 women (21.8 +/- 2.7 years) performed 2 trials consisting of seven exercises: bench press (BP), leg press, latissimus dorsi pull down, triceps press, biceps curl, shoulder press, and calf raise. The HIP and LIP protocols were completed in counterbalanced order. During HIP, subjects completed 5 repetitions using 90% of 1 repetition maximum (1RM). RPE-AM was measured after every repetition. During LIP, subjects completed 15 repetitions using 30% of 1RM. RPE-AM was measured after every third repetition. RPE-AMs were greater (p 相似文献   

Acute impact of blood flow restriction on strength-endurance performance during the bench press exercise

The main goal of the present study was to evaluate the acute effects of blood flow restriction (BFR) at 70% of full arterial occlusion pressure on strength-endurance performance during the bench press exercise. The study included 14 strength-trained male subjects (age = 25.6 ± 4.1 years; body mass = 81.7 ± 10.8 kg; bench press 1 repetition maximum (1RM) = 130.0 ± 22.1 kg), experienced in resistance training (3.9 ± 2.4 years). During the experimental sessions in a randomized crossover design, the subjects performed three sets of the bench press at 80% 1RM performed to failure with two different conditions: without BFR (CON); and with BFR (BFR). Friedman’s test showed significant differences between BFR and CON conditions for the number of repetitions performed (p < 0.001); for peak bar velocity (p < 0.001) and for mean bar velocity (p < 0.001). The pairwise comparisons showed a significant decrease for peak bar velocity and mean bar velocity in individual Set 1 for BFR when compared to CON conditions (p = 0.01 for both). The two-way repeated measures ANOVA showed a significant main effect for the time under tension (p = 0.02). A post-hoc comparisons for the main effect showed a significant increase in time under tension for BFR when compared to CON (p = 0.02). The results of the presented study indicate that BFR used during strength-endurance exercise generally does not decrease the level of endurance performance, while it causes a drop in bar velocity.     

NFL-225 Test to Predict 1RM Bench Press in NCAA Division I Football Players

ABSTRACT: Mann, JB, Stoner, JD, and Mayhew, JL. NFL-225 test to predict 1RM bench press in NCAA Division I football players. J Strength Cond Res 26(10): 2623-2631, 2012-The National Football League (NFL)-225 test has gained popularity for assessing muscular performance among college football programs. Although the test is a measure of absolute muscular endurance, it was reputed to be highly correlated with maximum muscular strength. The purposes of this study were to assess the predictive potential of the NFL-225 test for estimating 1 repetition maximum (1RM) bench press performance in National Collegiate Athletic Association Division I college football players and to evaluate the accuracy of previous NFL-225 prediction equations. Players (n = 289) in a successful Division I program were assessed over a period of 5 years for 1RM bench press and repetitions completed with 102.3 kg (225 lb). Test sessions occurred within 1 week of each other during the off-season training period. In a validation group (n = 202), repetitions were significantly correlated with 1RM (r = 0.95), producing a prediction equation (1RM [kg] = 103.5 + 3.08 Reps) with a standard error of estimate = 6.4 kg (coefficient of variation = 4.3%). In a randomly selected cross-validation group (n = 87), the new equation nonsignificantly underpredicted by 0.9 ± 7.2 kg produced a high correlation with actual 1RM (intraclass correlation coefficient [ICC] = 0.967), had a limit of agreement of -15.0 to 13.2 kg, and predicted 69% of the group within ±4.5 kg of their actual 1RM. The best previous equation was that of Slovak et al., which was nonsignificantly underpredicted by -0.5 ± 6.7 kg, produced a high correlation with actual 1RM (ICC = 0.975), and predicted 68% of the group within ±4.5 kg of their actual 1RM. The new NFL-225 test seems to be a reasonable predictor of 1RM bench press in Division I players but should be further assessed on players from other high-level programs.